* basic: allow one or more when param list having choices
* add unit tests
* optimize a bit
* re-add get_exception import
* a number of existing modules expect to be able to get it from basic.py
* Fixing eos_config save option. Was removed when deprecated. Fixing other deprecation documentation. Adding unit tests.
* Fixing removed_in_version for force.
* aws ssm parameter lookup test case - fails demonstrating no exception when parameter missing
* aws ssm parameter lookup - fail in case parameter doesn't exist
* aws ssm parameter lookup test case - failing case for nice return from path lookup
* aws ssm parameter lookup - convert incoming taglist to a key-value dictionary
* aws ssm parameter lookup - pep8 / style clean up
* aws_ssm lookup plugin rewrite for more standard interface
* aws_ssm module and lookup - introduce integration test and fix:
* aws_ssm module and lookup - error case integraton test and many PEP8 and other cleanups
* aws ssm parameter lookup - Various fixes in response to review + recursive fix & test
* aws ssm parameter lookup - more in response to review - shertel/abadger
* aws ssm parameter lookup unit test - move to mocker according to abadger
* aws ssm parameter lookup - integrate with new documentation fragment
* aws ssm parameter lookup - accept either aws_profile or boto_profile
* aws ssm parameter lookup - eliminate lookup document fragment until env vars are fixed later
* ACI: Change result output as discussed
* Update all modules to use new aci.exit_json()
* Update output_level spec and docs
* Fix integration tests
* Small PEP8 fix
* Asorted fixes to tests and aci_rest
* More test fixes and support for ANSIBLE_DEBUG
* Fix another PEP8 issues
* Move response handling inside ACI module
* Reform of ACI error handling and error output
* Diff multiline json output
* Fix a few more tests
* Revert aci_bd tests
* Small correction
* UI change: existing->current, original->previous
* UI change: config->sent
* Update all modules with RETURN values
* Fix a few more tests
* Improve docstring and add 'raw' return value
* Fix thinko
* Fix sanity/pep8 issues
* Rewrite unit tests to comply with new design
* Fix over-byte
* Update ios tests to call `provider`
To continue to support testing `connection: local`
* Fix command dict handling in ios_user
* Clean up unit tests, too
* Revert model and serialnum to older version
* Add stacked versions of model and serialnum as separate facts
* Add unit test to check stacked output
* Alter model regex to address #34768
Enforce module deprecation.
After module has reached the end of it's deprecation cycle we will replace it with a docs stub.
* Replace deprecated modules with docs-only sub
* Use of deprecated past deprecation cycle gives meaningful message (see examples below)
* Enforce documentation.deprecation dict via `schema.py`
* Update `ansible-doc` and web docs to display documentation.deprecation
* Document that structure in `dev_guide`
* Ensure that all modules starting with `_` have a `deprecation:` block
* Ensure `deprecation:` block is only used on modules that start with `_`
* `removed_in` A string which represents when this module needs **deleting**
* CHANGELOG.md and porting_guide_2.5.rst list removed modules as well as alternatives
* CHANGELOG.md links to porting guide index
To ensure that meaningful messages are given to the user if they try to use a module at the end of it's deprecation cycle we enforce the module to contain:
```python
if __name__ == '__main__':
removed_module()
```
* refactors nios api shared code to handle provider better
This change refactors the shared code to be easily shared between
modules, plugins and dynamic inventory scripts. All parts now implement
the provider arguments uniformly.
This also provides a centralized fix to suppress urllib3 warnings coming
from the requests library implemented by infoblox_client
* fix up pep8 errors
* fix missing var name
* Adding new code for new module and new module_utils with the pip pyfmg package
* Changed login and logout functionality and renamed mod_utils file as well as cleaned up PEP8 syntax
* Removing extra Ansible parameters and fixing more syntax issues
* Fixing more syntax issues and comparing against previous FTNT script module
* Changing import location to pass syntax checks
* Fixing pylint errors
* Removing test files
* Add unit tests and enabling a login session check within main in order to throw error if network connection exception
* Fixing syntax issues for adding unit tests
* Changing case for pip package requirements
* adding comments
* adding version restriction on pip package for testing
* adding version restriction on pip package for testing
* More comments
* Fixing documentation errors and add the ability to skip a test if it isn't present
* Fixing Pep8 error with whitespace (tab) in the row
* Remove compat code for to_unicode, to_str and to_bytes
Code was marked as deprecated and to be removed after 2.4
* Remove is_encrypted and is_encrypted_file
Code was marked as deprecated after 2.4 release.
* Imported lookup plugin from Role
* Plugin cleanup, including:
* Use existing Python YAML parsing
* Remove environment variables as connection options
* Added initial debugging information
* Reworked the lookup plugin using the Python Request library. As it's available through Ansible, it makes communication with Conjur much more straight forward.
* Removed un-used libraries
* Fixed linting issues
* Standardized output on `format` and insure it works for 2.6, 2.7, and 3.x.
* Use quote_plus from the six library for improved python 2/3 behavior.
* Refactored identity & configuration to prefer user's file. This also includes a refactor to remove an un-needed dictionary merge method.
* Removed `requests` in favor of `ansible.module_utils.urls`.
* Refactored netrc loading to warn if host is not present.
* Tests and a refactor to support easier testing.
* Added reference to website
* Fixed two linting errors
* Fixed an extra line found by linting
* Updated file write to use binary to insure config files are written correctly
* Resolved linting issues
* Refactored config & identity loading to take advantage of plugin options
* Cleanup a bunch of small items caught by linting
* Removed extra line caught by linting
* Swapped in pytest and added some tests with mocked network responses
* Pushing to see if this approach works better...
* Refactored be open_url mocking based on feedback
* Fixed a couple linting issues & refactored mocking into each method to attempt to resolve a failing test
* Use a generic MagicMock for python 2.6
* Fixes doc typo
require -> required
* Use `type: path` in identity_file and config_file
Also removes `expanduser` calls below (which will now be called automatically on
paths.)
* Defines maintainers for conjur_variable plugin
* BOTMETA.yml:
** defines $team_cyberark_conjur as maintainers of Conjur Variable plugin
** adds myself and @jvanderhoof to that team
* Adds URLs to relevant documentation for Conjur Variable lookup plugin
* Clarifies "the server," "the machine" -> "controlling host"
The machine identity used is that of the Ansible controlling host, not any
server being provisioned or instructed. This documentation change aims to make
that relationship clear.
* Adds response code to exception message on authentication failure
* Enhances exception messages to specify the controlling host
These error messages are less likely to confuse a user as to which machine is
associated with the files, identities, and configurations being described.
* Adds ANSIBLE_METADATA for Conjur variable lookup plugin
aws_ec2 is an inventory plugin intended to replace uses of the `contrib/inventory/ec2.py`
inventory script.
For advanced grouping, please use the `constructed` inventory plugin.
Add deps/requires for fact collectors
Fact collectors can now set a required_facts
class attribute that will be a set of the names
of fact collectors they require to be run first.
ie, if a collector needs to know the ansible_distribution,
it should set it's required_facts to include 'distribution'
required_facts = set(['distribution'])
If a collector requires another collector, it gets added
to the selected collector names.
We then topological sort the ordering of the collectors
so that deps work out (ie, 'distribution' will run before
'service_mgr')
required_facts were added to the collectors for:
- network (requires 'distribution', 'platform')
- hardware (requires 'platform')
- service_mgr (requires 'distribution', 'platform')
Fix name references for facts (need 'ansible_' prefix)
is service_mgr
Fixes#30753
The accumulated collected_facts was being update
with new facts _after_ filtering them. So only
facts that pass the filter would ever be passed
to other fact collectors.
For 'filter=ansible_service_mgr', even though it requires
the platform and distribution facts and even collects them,
they would get filtered out and never passed to the other
collectors that need them (service_mgr for ex).
Fix is just to add the unfiltered facts to collected_facts.
Adds unit tests for fact filter and collected_facts.
Fixes#32286
The search string used to look for Clear Linux
was changed in 45a9f96774 to
be more specific, but was too specific. Now finding
a substring match for 'Clear Linux' in /usr/lib/os-release
is enough to consider a match.
Since the details of the full name in os-release varies
('Clear Linux Software for Intel Architecture',
'Clear Linux OS for Intel Architecture', etc) the
search string match was failing and would fall back to the
'first word in the release file' method resulting in
ansible_distribution='NAME="Clear'
Also add a meta fact indicating which search string
was matched.
Test case info from:
https://github.com/ansible/ansible/issues/31501#issuecomment-340861535Fixes#31501
Extract vault related bits of DataLoader._get_file_contents to DataLoader._decrypt_if_vault_data
When loading vault password files, detect if they are vault encrypted, and if so, try to decrypt with any already known vault secrets.
This implements the 'Allow vault password files to be vault encrypted' (#31002) feature card from
the 2.5.0 project at https://github.com/ansible/ansible/projects/9Fixes#31002
* Moved the encryption to its own action method.
* removed silly default value for encryption type.
* Code formatting issues from pull request ANSIBOT.
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
* changed version_added to "2.5"
because of new new options available
There are changes that the merge config can fail, but the module
will still report success. This adds a blob of code to start
collecting those failures and bubbling up a module failure
accordingly.
* allow shells to have per host options, remote_tmp
added language to shell
removed module lang setting from general as plugins have it now
use get to avoid bad powershell plugin
more resilient tmp discovery, fall back to `pwd`
add shell to docs
fixed options for when frags are only options
added shell set ops in t_e and fixed option frags
normalize tmp dir usag4e
- pass tmpdir/tmp/temp options as env var to commands, making it default for tempfile
- adjusted ansiballz tmpdir
- default local tempfile usage to the configured local tmp
- set env temp in action
add options to powershell
shift temporary to internal envvar/params
ensure tempdir is set if we pass var
ensure basic and url use expected tempdir
ensure localhost uses local tmp
give /var/tmp priority, less perms issues
more consistent tempfile mgmt for ansiballz
made async_dir configurable
better action handling, allow for finally rm tmp
fixed tmp issue and no more tempdir in ballz
hostvarize world readable and admin users
always set shell tempdir
added comment to discourage use of exception/flow control
* Mostly revert expand_user as it's not quite working.
This was an additional feature anyhow.
Kept the use of pwd as a fallback but moved it to a second ssh
connection. This is not optimal but getting that to work in a single
ssh connection was part of the problem holding this up.
(cherry picked from commit 395b714120522f15e4c90a346f5e8e8d79213aca)
* fixed script and other action plugins
ensure tmpdir deletion
allow for connections that don't support new options (legacy, 3rd party)
fixed tests
* Cache tasks as they are queued instead of en masse
This also moves the task caching from the PlayIterator to the
StrategyBase class, where it makes more sense (and makes it easier
to not have to change the strategy class methods leading to an API
change).
Fixes#31673
* Cleaning up unit tests due to 502ca780
This patch is primarily a refactor to make the validate-modules arg-spec
no longer generate a traceback. It additionally includes removal of deprecated
code in the virtual server module.
The main patch is to remove the traceback generating code. There are
other small fixes that were made in addition to doing that.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
The main purpose of this patch is to do the refactor that
supports replacing tracebacks with fail_json. Additionally, the
following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
Primarily, this patch contains refactors to remove tracebacks that
are generated when libraries are missing. There is also,
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg. Minor bug fixes made during this refactor.
This patch was primarily an effort to reduce traceback errors for
work that sivel was doing. Part of (and in some cases in addition to)
that, the following was done.
* Removed re-def of cleanup_tokens.
* Changed parameter args to be keywords.
* Changed imports to include new module_util locations.
* Imports also include developing (sideband) module_util locations.
* Changed to using F5Client and plain AnsibleModule to prevent tracebacks caused by missing libraries.
* Removed init and update methods from most Parameter classes (optimization) as its now included in module_utils.
* Changed module and module param references to take into account the new self.module arg.
* Minor bug fixes made during this refactor.
* Mellanox OS name change: MLNXOS changed to ONYX
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix alphabetical order of modules metadata
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add new module for managing ospf protocol on mlnxos devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix test name, and documentation.
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Allow protection of certain keys during camel_to_snake
Create an `ignore_list` parameter that preserves the case
of the contents of certain dictionaries. Most valuable
for `tags` but other uses might arise.
* Port ec2_vpc_route_table to boto3
Update tests to reflect fixes in boto3.
* Add RETURN documentation to ec2_vpc_route_table
* Update DOCUMENTATION to be valid yaml
* Add check mode tests
* Provide a way to explicitly invoke the debugger with in the debug strategy
* Merge the debugger strategy into StrategyBase
* Fix some logic, pin to a single result
* Make redo also continue
* Make sure that if the debug closure doesn't need to process the result, that we still return it
* Fix failing tests for the strategy
* Clean up messages from debugger and exit code to match bin/ansible
* Move the FieldAttribute higher, to apply at different levels
* make debugger a string, expand logic
* Better host state rollbacks
* More explicit debugger prompt
* ENABLE_TASK_DEBUGGER should be boolean, and better docs
* No bare except, add pprint, alias h, vars to task_vars
* _validate_debugger can ignore non-string, that can be caught later
* Address issue if there were no previous tasks/state, and use the correct key
* Update docs for changes to the debugger
* Guard against a stat going negative through use of decrement
* Add a few notes about using the debugger on the free strategy
* Add changelog entry for task debugger
* Add a few versionadded indicators and a note about vars -> task_vars
* Add new module mlnxos_protocol for enabling disabling protocols on
MLNX-OS Mellanox network devices
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Fix Test Class name
* Fix IP routing protocol support
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Add missing support for check_mode, and Fix documentation
Signed-off-by: Samer Deeb <samerd@mellanox.com>
A bug in the parsing of single commands with commas
Token cleanup
Password argument now defaults to false
Addition of coding conventions from v3 conventions
This module can be used to add license offerings to a pool. This
is the second part required to license a remote device from a
BIG-IQ (the first being to create a pool with bigiq_regkey_pool)
* Removes deprecated code from bigip_monitor_tcp
The deprecated code was moved into its own modules. We let it lay
here for a release, and now I'm removing it.
* Fixing upstreaming tests
This module can be used to create GTM servers (not to be confused with
GTM virtual servers) on a BIGIP. GTM servers are a component of the
datacenter, and GTM virtual servers are their members.
* basic.py: add mock to os.path.exists
* set_*_if_different: if check_mode enabled & file missing: set changed to True
Fixes#32676
Thanks to mscherer and Spredzy for the distributed triplet programming
session!
* galaxy unit tests: add missing program name
* galaxy unit tests: remove incorrect switchs
- 'install' action doesn't support '--offline' switch
- 'remove' action doesn't support '--init-path' switch
Code refactor to use f5 coding conventions. Removed deprecated
"enabled/disabled" params (this is now a state). Adds token cleanup
for cases where many api calls are made.
This refactors the bigip_virtual_server module to address several issues and
missing features. Additionally it adds tests and updates the coding standards
to the recent version used by f5. Finally, it removes deprecated items that
were announced in 2.4
* mutually_exclusive add - ios_config parents works with lines by not src
* mutually_execlusive parents,src added to all other net modules
* tests for mutually_exclusive parents,src and whitespce removal
* Add module mlnxos_linkagg for configuring LAG and MLAG on Mellanox
switches
Signed-off-by: Samer Deeb <samerd@mellanox.com>
* Remove unnecessary method in unit-test
remove _execute_module and use execute_module from base class
* update version parsing and move requirements to nso_* modules
prepare for introduction of nso_show module that has other version
requirements than the existing nso_* modules.
* Add nso_show module for retreiving config from Cisco NSO
New module that supports getting configuration and operational data
from Cisco NSO.
Shell is implemented via the command module. There was a special case
in mod_args to do that. Make shell into an action plugin to handle that
instead.
Also move the special case for the command nanny into a command module
action plugin. This is more appropriate as we then do not have to send
a parameter that is only for the command module to every single module.
* WIP adds network subnetting functions
* adds functions to convert between netmask and masklen
* adds functions to verify netmask and masklen
* adds function to dtermine network and subnet from address / mask pair
* network_common: add a function to get the first 48 bits in a IPv6 address.
ec2_group: only use network bits of a CIDR.
* Add tests for CIDRs with host bits set.
* ec2_group: add warning if CIDR isn't the networking address.
* Fix pep8.
* Improve wording.
* fix import for network utils
* Update tests to use pytest instead of unittest
* add test for to_ipv6_network()
* Fix PEP8
This fix check if DNS4 is None or not before proceeding with
other operations. Also, added unit test for this change.
Signed-off-by: Fedor Sumkin <qosys.net@gmail.com>
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Split the one monolithic test for basic.py into several files
* Split test_basic.py along categories.
This is preliminary to get a handle on things. Eventually we may want
to further split it so each file is only testing a single function.
* Cleanup unused imports from splitting test_basic.py
* Port atomic_move test to pytest.
Working on getting rid of need to maintain procenv
* Split a test of symbolic_mode_to_octal to follow unittest best practices
Each test should only invoke the function under test once
* Port test_argument_spec to pytest.
* Fix suboptions failure
* Fixing aruba's inconsitent indenting.
* Adding config with different children indentation and unit test to confirm the different spacing does not matter.
* Fixing pylint check. Missed an r prefix.
* When inserting a new rule in `insert_after_rule`, check if the old rule is
the last rule, to avoid a list index out of range error when attempting to
access the next rule.
* Add a test for inserting a new rule after the last rule.
Allow CamelCase version of snake_dict_to_camel_dict
(currently only dromedaryCase is supported)
Add reversible option to camel_dict_to_snake_dict
Add tests for both of these options
* TestPlaybookCLI: '--flush-cache' were ignored
Check that using '--flush-cache' does something
* check that '_flush_cache' does something
There isn't any fact by default: the assertion was true even if
'cli._flush_cache()' isn't called.
* Fixing save so it still works. Adding changed as an option for save_when.
* Updating unit tests.
* Updating description to state that changed was added in 2.5.
* Change cast_list_to_dict to more generic rekey_on_member
cast_list_to_dict was taking an arbitrary data format in and returning
an arbitrary data format out. Rework this to be a more generic function
which creates a dict of dicts based on a member of the dict.
Remove cast_dict_to_list since rekey_on_member handles the use cases we
know about and cast_dict_to_list suffers from the same problems as
cast_list_to_dict. If this is still needed we could think about filters
we could add to do this in a short jinja2 pipeline.
* Fix bare excepts (bare excepts even catch sys.exit())
* Fix _clean_result for debug callback with 1 char var names
The check in _clean_results was removing any keys that happened
to be one of the chars in ('invocation') instead of the string
'invocation'. This was meant to be a tuple but there was no comma
so the for iterated the string instead of the tuple.
Introduced in 9dba580204
Update unit test to catch this.
Fixes#33723
* Use .pop() to remove invocation from results dict
In base callback _clean_results, simplify the way the
'invocation' item is removed.
Add some more unit tests.
* Deprecate Entity, EntityCollection and use subspec in network modules
* As per proposal https://github.com/ansible/proposals/issues/76
deprecate use of Entity, EntityCollection, ComplexDict, ComplexList
and use subspec instead.
* Refactor ios modules
* Refactor eos modules
* Refactor vyos modules
* Refactor nxos modules
* Refactor iosxr modules
* Add support for key in suboptions handling
* Fix CI issues
* - Netconf plugin addition for iosxr
- Utilities refactoring to support netconf and cliconf
- iosx_banner refactoring for netconf and cliconf
- Integration testcases changes to accomodate above changes
* Fix sanity failures, shippable errors and review comments
* fix pep8 issue
* changes run_command method to send specific command args
* - Review comment fixes
- iosxr_command changes to remove ComplexDict based command_spec
* - Move namespaces removal method from utils to netconf plugin
* Minor refactoring in utils and change in deprecation message
* rewrite build_xml logic and import changes for new utils dir structure
* - Review comment changes and minor changes to documentation
* * refactor common code and docs updates
In case of workflow delete action, the returned 404 status code
considered as invalid although it's a valid code for not found (deleted)
entity.
Removed verification of the status. Only success should be verified.
Fixes#33524
* Porting tests to pytest
* Achievement Get: No longer need mock/generator.py
* Now done via pytest's parametrization
* Port safe_eval to pytest
* Port text tests to pytest
* Port test_set_mode_if_different to pytest
* Change conftest AnsibleModule fixtures to be more flexible
* Move the AnsibleModules fixtures to module_utils/conftest.py for sharing
* Testing the argspec code requires:
* injecting both the argspec and the arguments.
* Patching the arguments into sys.stdin at a different level
* More porting to obsolete mock/procenv.py
* Port run_command to pytest
* Port known_hosts tests to pytest
* Port safe_eval to pytest
* Port test_distribution_version.py to pytest
* Port test_log to pytest
* Port test__log_invocation to pytest
* Remove unneeded import of procenv in test_postgresql
* Port test_pip to pytest style
* As part of this, create a pytest ansiblemodule fixture in
modules/conftest.py. This is slightly different than the
approach taken in module_utils because here we need to override the
AnsibleModule that the modules will inherit from instead of one that
we're instantiating ourselves.
* Fixup usage of parametrization in test_deprecate_warn
* Check that the pip module failed in our test
* Refactor common network shared and platform specific code into package (part-1)
As per proposal #76 refactor common network shared and platform specific
code into sub-package.
https://github.com/ansible/proposals/issues/76
* ansible.module_utils.network.common - command shared functions
* ansible.module_utils.network.{{ platform }} - where platform is platform specific shared functions
* Fix review comments
* Fix review comments
* Refactors bigip_node
Includes a number of fixes and enhancements in addition to refactoring
the code to be inline with f5 standards
* Fixes upstream errors
* Adds bigip_policy_rule module
This module is the second component of managing LTM policies on
BIG-IP. This module lets you manage the rules of a policy
* Fixing upstream errors
* Correcting YAML errors
* Fixes and features for bigip_provision
Adds support for dedicated modules. Fixes bug in minimum name.
Adds wrappers around checking for up-ness so that they will contribute
to the watch loop
* Fixes upstream errors
* Added . and / to rule args regexp
Things like pam_echo.so file=/etc/foo.txt weren't being matched and
causing incorrect change counts. Adding / and . fixed that.
Fixes#33351
* pamd: test argument with value
Relates #33351
* Adding module enos_config and its UT files
* Removing trailing line
* Removing trailing lines
* Editing enos_module.py to fix build errors
* Removing blank lines in end
* Updating enos_config.py based on review comments
* Adding one more blank line
* Removing training white space
* Removing test_enos_config_force method from UT
* Updating documentation
* Comments by John, Remove version_added: "2.5"
* Add netscaler_nitro_request module
* Make changes as requested.
* Fix whitepsace in EXAMPLES block.
* Set module changed status according to operation performed.
* Added support to Datacenter resources in HPE OneView
* Adjusting comments in oneview_datacenter_facts
* Adding no_log on the documentation
* Using Pytest to Oneview DatacenterFactsModule tests
* Warn on tests used as filters
* Update docs, add aliases for tests that fit more gramatically with test syntax
* Fix rst formatting
* Add successful filter, alias of success
* Remove renamed_deprecation, it was overkill
* Make directory alias for is_dir
* Update tests to use proper jinja test syntax
* Update additional documentation, living outside of YAML files, to reflect proper jinja test syntax
* Add conversion script, porting guide updates, and changelog updates
* Update newly added uses of tests as filters
* No underscore variable
* Convert recent tests as filter changes to win_stat
* Fix some changes related to rebasing a few integration tests
* Make tests_as_filters_warning explicitly accept the name of the test, instead of inferring the name
* Add test for tests_as_filters_warning
* Update tests as filters in newly added/modified tests
* Address recent changes to several integration tests
* Address recent changes in cs_vpc
* add type manipulation
* update for py3
* add tests for list to dict
* Add dict to list tests
* Update tests to search for regex in response
* pep8 clean up
* update Exception for py3
* update test to be py2/3 compat
* update for py26 compat
* potential fix for py3 and py26
* potential fix for py3 and py26 take2
* add new line to kick off shippable
* remove cache file created
* fix filter name
* add space for shipable
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
* Fix junos integration test fixes as per connection refactor (#33050)
Refactor netconf connection plugin to work with netconf plugin
Fix CI failure
Fix unit test failure
Fix review comments
* Adding aliases for field attributes and renaming async attribute
As of Python 3.7, the use of async raises an error, whereas before the use
of the reserved word was ignored. This adds an alias field for field attrs
so that both async and async_val (interally) work. This allows us to be
backwards-compatible with 3rd party plugins that may still reference Task.async,
but for the core engine to work on Py3.7+.
* Remove files fixed for 'async' usage from the python 3.7 skip list
* Allow the user to circumvent adding -tt on ssh commands to help aid in
debugging ssh related problems.
* Move config to the plugin
* Set version_added
* Change yaml section to "connection"
* Fix ssh unit tests
* jsonify inventory
* smarter import, dont pass kwargs where not needed
* added datetime
* Eventual plan for json utilities to migrate to common/json_utils when we split
basic.py no need to move jsonify to another file now as we'll do that later.
* json_dict_bytes_to_unicode and json_dict_unicode_to_bytes will also
change names and move to common/text.py at that time (not to json).
Their purpose is to recursively change the elements of a container
(dict, list, set, tuple) into text or bytes, not to json encode or
decode (they could be a generic precursor to that but are not limited
to that.)
* Reimplement the private _SetEncoder which changes sets and datetimes
into objects that are json serializable into a private function
instead. Functions are more flexible, less overhead, and simpler than
an object.
* Remove code that handled simplejson-1.5.x and earlier. Raise an error
if that's the case instead.
* We require python-2.6 or better which has the json module builtin to
the stdlib. So this is only an issue if the stdlib json has been
overridden by a third party module and the simplejson on the system
is 1.5.x or less. (1.5 was released on 2007-01-18)
* Add new filter to parse xml output for network use cases
Fixes#31026
* Add parse_xml filter
* Add documentation for parse_xml filter
* Edited for clarity.
* Fix review comment and add unit tests
* Fix unit test CI failure
* Fix CI issues
* Fix unit test failures
* Fix review comments
* More copy edits.
* Adding RPC attribute arguments to `junos_rpc` network module.
* Specifying module argument version.
* Fixing DOCUMENTATION block.
* First attempt at new test fixture.
* Updated RPC_CLI_MAP.
* Use `result` instead of `reply`.
This module can be used to manage guests on a vCMP provisioned BIG-IP.
vCMP is a hardware-only feature, therefore this module cannot be used
on the VE editions of BIG-IP.
* move set_module_args to units.modules.utils
* unit tests: reuse set_module_args
* unit tests: mock exit/fail_json in module.utils.ModuleTestCase
* unit tests: use module.utils.ModuleTestCase
* unit tests: fix 'import shadowed by loop variable'
* included inventory and callback in new config
allow inventory to be configurable
updated connection options settings
also updated winrm to work with new configs
removed now obsolete set_host_overrides
added notes for future bcoca, current one is just punting, it's future's problem
updated docs per feedback
added remove group/host methods to inv data
moved fact cache from data to constructed
cleaner/better options
fix when vars are added
extended ignore list to config dicts
updated paramiko connection docs
removed options from base that paramiko already handles
left the look option as it is used by other plugin types
resolve delegation
updated cache doc options
fixed test_script
better fragment merge for options
fixed proxy command
restore ini for proxy
normalized options
moved pipelining to class
updates for host_key_checking
restructured mixins
* fix typo
* Fix vault --ask-vault-pass with no tty
2.4.0 added a check for isatty() that would skip setting up interactive
vault password prompts if not running on a tty.
But... getpass.getpass() will fallback to reading from stdin if
it gets that far without a tty. Since 2.4.0 skipped the interactive
prompts / getpass.getpass() in that case, it would never get a chance
to fall back to stdin.
So if 'echo $VAULT_PASSWORD| ansible-playbook --ask-vault-pass site.yml'
was ran without a tty (ie, from a jenkins job or via the vagrant
ansible provisioner) the 2.4 behavior was different than 2.3. 2.4
would never read the password from stdin, resulting in a vault password
error like:
ERROR! Attempting to decrypt but no vault secrets found
Fix is just to always call the interactive password prompts based
on getpass.getpass() on --ask-vault-pass or --vault-id @prompt and
let getpass sort it out.
* up test_prompt_no_tty to expect prompt with no tty
We do call the PromptSecret class if there is no tty, but
we are back to expecting it to read from stdin in that case.
* Fix logic for when to auto-prompt vault pass
If --ask-vault-pass is used, then pretty much always
prompt.
If it is not used, then prompt if there are no other
vault ids provided and 'auto_prompt==True'.
Fixes vagrant bug https://github.com/hashicorp/vagrant/issues/9033Fixes#30993
* Adding git_command module and its UT file
* Changing Author Name and removing 2 blank lines
* Removing blank lines
* Adding enos_config and its UT files
* Removing config module as I am allowed to have only module per PR
* Work on Ganesh's Review comments
* John Review Comments on enos_command.py
* Review comments of John
* Add mtu option nxos_interface feature idea
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Add unit test for mtu feature
Signed-off-by: Trishna Guha <trishnaguha17@gmail.com>
* Better handling of malformed vault data envelope
If an embedded vaulted variable ('!vault' in yaml)
had an invalid format, it would eventually cause
an error for seemingly unrelated reasons.
"Invalid" meaning not valid hexlify (extra chars,
non-hex chars, etc).
For ex, if a host_vars file had invalid vault format
variables, on py2, it would cause an error like:
'ansible.vars.hostvars.HostVars object' has no
attribute u'broken.example.com'
Depending on where the invalid vault is, it could
also cause "VARIABLE IS NOT DEFINED!". The behavior
can also change if ansible-playbook is py2 or py3.
Root cause is errors from binascii.unhexlify() not
being handled consistently.
Fix is to add a AnsibleVaultFormatError exception and
raise it on any unhexlify() errors and to handle it
properly elsewhere.
Add a _unhexlify() that try/excepts around a binascii.unhexlify()
and raises an AnsibleVaultFormatError on invalid vault data.
This is so the same exception type is always raised for this
case. Previous it was different between py2 and py3.
binascii.unhexlify() raises a binascii.Error if the hexlified
blobs in a vault data blob are invalid.
On py2, binascii.Error is a subclass of Exception.
On py3, binascii.Error is a subclass of TypeError
When decrypting content of vault encrypted variables,
if a binascii.Error is raised it propagates up to
playbook.base.Base.post_validate(). post_validate()
handles exceptions for TypeErrors but not for
base Exception subclasses (like py2 binascii.Error).
* Add a display.warning on vault format errors
* Unit tests for _unhexlify, parse_vaulttext*
* Add intg test cases for invalid vault formats
Fixes#28038
* implements jsonrpc message passing for ansible-connection
* implements more generic mechanism for persistent connections
* starts persistent connection in task_executor if enabled and supported
* supports using network_cli as top level connection plugin
* enhances logging for persistent connection to stdout
* Update action plugins
* Fix Python3 RPC
* Fix Junos bytes<-->str issues
* supports using netconf as top level connection plugin
* Error message when running netconf on an unsupported platform
* Update tests
* Fix `authorize: yes` for `connection: local`
* Handle potentially JSON data in terminal
* Add clarifying detail if possible on ConnectionError
* Squashing all commits to one as suggested by John
* Adding Unit test method for the module enos_facts.py
* Pep8 and Ylint issues addressed
* Trying again to remove blank line. Some scripts are required for this.
* Bug Fixing for interfaces
* Editing for over indenting issue
* E203 whitespace before ','
* Update enos.py
Added warnings argument as to check_args method
* Update enos_facts.py
Added warnings to check_args method
* When getting the stack events we need to consider the case where we don't have ClientRequestToken fixes#32396
* Adding tests for the case when the ClientRequestToken is not present in the stack creation.
* Renaming the stack that the test for Client Request Token requires so it won't cause collisions with the basic test.
* Ensure include_role unit tests check something
This is not the case: get_tasks_vars doesn't yield
* Fix include_role unit tests
Since e609618274, include_role are not
static anymore.
