* Refactoring of cnos_interface module like what followed by other vendors
* To remove cnos-interface from E326 validation ignore list
* Effect of default parameters impacted UT
* Added organization in the scm_credential get
* Fallback looking for cred in project org
* Tests project with multi org credential
* Fixed CI issue
* Added changelog fragment
* Fix mandatory statement error for junos modules
Fixes#40267
* Add error regex in junos terminal plugin to error out
in case of commit fails
* If commit fails add logic to discard changes before existing
else next task will result in error
* Add integration test
* Minor update
* Revert "allow caller to deal with timeout (#49449)"
This reverts commit 63279823a7.
Flawed on many levels
* Adds poor API to a public function
* Papers over the fact that the public function is doing something bad
by catching exceptions it cannot handle in the first place
* Papers over the real cause of the issue which is a bug in the timeout
decorator
* Doesn't reraise properly
* Catches the wrong exception
Fixes#49824Fixes#49817
* Make the timeout decorator properly raise an exception outside of the function's scope
signal handlers which raise exceptions will never work well because the
exception can be raised anywhere in the called code. This leads to
exception race conditions where the exceptions could end up being
hanlded by unintended pieces of the called code.
The timeout decorator was using just that idiom. It was especially bad
because the decorator syntactically occurs outside of the called code
but because of the signal handler, the exception was being raised inside
of the called code.
This change uses a thread instead of a signal to manage the timeout in
parallel to the execution of the decorated function. Since raising of
the exception happens inside of the decorator, now, instead of inside of
a signal handler, the timeout exception is raised from outside of the
called code as expected which makes reasoning about where exceptions are
to be expected intuitive again.
Fixes#43884
* Add a common case test.
Adding an integration test driven from our unittests. Most of the time
we'll timeout in run_command which is running things in a subprocess.
Create a test for that specific case in case anything funky comes up
between threading and execve.
* Don't use OSError-based TimeoutError as a base class
Unlike most standard exceptions, OSError has a specific parameter list
with specific meanings. Instead follow the example of other stdlib
functions, concurrent.futures and multiprocessing and define a separate
TimeoutException.
* Add comment and docstring to point out that this is not hte Python3 TimeoutError
* Fix example in ini.py
* Fix unittest in test_ini.py to pass CI as latest ansible returns list in
different order. To prevent such issues in future results are sorted
* PEP8 E501 styling improvements
Co-Authored-By: Sergii Golovatiuk <sgolovat@redhat.com>
* no-smart-quotes: Skip files by path in code-smell
This is to ensure the generated docs do not trigger code-smell issues on
contributor systems.
* Implement feedback from review
* Add cryptography backend for openssl_privatekey.
* Adding ECC support.
No support for X25519 and X449, since they don't support serialization.
* Improve finterprint calculation to work with Python 3.
* Add fingerprint check.
* Fix typo.
* Use separate curve option for elliptic curves, and use type 'ECC'.
* Using curve names as defined in IANA registry.
* Bump minimal supported cryptography version. Older versions might work as well, but I couldn't test them.
* Improve documentation.
* Change test suite to fit expected behaviour
This reverts some changes from ansible/ansible@723daf3
If a line is found in the file, exactly or via regexp matching, it must
not be added again.
insertafter/insertbefore options are used only when a line is to be
inserted, to specify where it must be added.
* Implement the change in behaviour mentioned in the previous commit
* Fix comment to reflect what the code does
* Set the correct return message.
In these cases, the lines are added, not replaced.
* Add a changelog
* Allow tags to be templated from a variable. Fixes#49825
* Restore _load_tags to ensure we do csv tag splitting
* Add tests for csv tags and templated tags
* evaluate_tags doesn't need to accept strings, because _load_tags handles this
Since the 'platform.dist()' and 'platform.linux_distribution()'
methods will be removed from future versions of python, this
provides an alternative to replace ansibles use of those
methods.
lib/ansible/module_utils/distro.py is a copy of
https://github.com/nir0s/distro/blob/master/distro.py
This module is originally from https://github.com/nir0s/distro
and is license under the Apache License, Version 2.0.
* In some cases, it appears that Exception should have been used instead
as there's no need to catch sys.exit KeyboardInterrupt and similar.
* In a few cases, it appears that BaseException is used because
a library we depend on calls sys.exit() contrary to good coding
design. Comment those so that we know that those have been audited
and found to be correct and change to use (Exception, SystemExit)
instead.
* Windows Privileges - moved util code to it's own C# util
* Rename Enabler class to PrivilegeEnabler to remove ambiguity
* rename Utils to PrivilegeUtil
* fix missing util name changes
This work enables to add sit tunnel via nmcli module
Signed-off-by: Susant Sahani susant@redhat.com
SUMMARY
ISSUE TYPE
Feature Pull Request
COMPONENT NAME
nmcli
ANSIBLE VERSION
2.8
ADDITIONAL INFORMATION
- nmcli:
state: present
type: sit
conn_name: sit_test1
autoconnect: yes
ip_tunnel_dev: enp0s8
ip_tunnel_local: 192.168.1.2
ip_tunnel_remote: 192.168.1.5
* win become: refactor and add support for passwordless become
* make tests more stable
* fix up dep message for Load-CommandUtils
* Add further check for System impersonation token
* re-add support for become with accounts that have no password
* doc fixes and slight code improvements
* fix doc sanity issue
* Docs: Add a separate "seealso" section to the module docs
to list related modules and/or related references. This clears up the notes
section for things that are actual notes.
So you can add a section in your module documentation and four types of
references are possible.
seealso:
# Reference by module name
- module: aci_tenant
# Reference by module name, including description
- module: aci_tenant
description: ACI module to create tenants on a Cisco ACI fabric.
# Reference by rST documentation anchor
- ref: aci_guide
description: Detailed information on how to manage your ACI infrastructure using Ansible.
# Reference by Internet resource
- name: APIC Management Information Model reference
description: Complete reference of the APIC object model.
link: https://developer.cisco.com/docs/apic-mim-ref/
This PR also includes:
- Implements ansible-doc support
- Implements schema support for the seealso options
- Updates to the development documentation
- Rename filter convert_symbols_to_format to rst_ify, cfr the existing html_ify and tty_ify filters
- This makes the existing template a lot easier to read and fixes the confusion I had myself rereading the template (again).
- We fixed the possible suboption types (which was limited to 'bool' only)
* Use latest stable instead of devel docs
- Require username and password for unregistering and avoid "cannot marshal None unless allow_none is enabled" error when using an activation key and no channels specified.
- Update test fixtures and add changelog
Co-authored-by: WhyIsThisOpen <WhyIsThisOpen@users.noreply.github.com>
* Pluribus Networks pn access list ip module with unit test cases
* Changes according to ansibot standards in unit test modules
* Remove unwanted variables
* Removed unwanted super call
* set ansible_os_family from name variable in os-release for clearlinux system
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add os_family for clear linux and clear linux mixes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Fix various bugs related in reboot
- Use format strings for consistency and improve debug log messages
- Use local variables instead of class attributes in order to be thread safe
- Run setup module to get distribution and version
- Run find module to get full path of shutdown command
- Use ansible_os_family and ansible_distribution to find commands and args
- Use same command for all Solaris/SunOS distributions
- Move delay calculations to properties
- Reliably check for module run failure
- Fix bug in run_test_command() that accidentally made the method work properly
- Use better exceptions rather than Exception
- Use dict literals rather than constructors
- Correct _check_delay() so it always returns a value, not None
- Don't store and return result in run_test_command() because it's not used anywhere
- add test for post reboot command that fails
- test negative values for delay parameters
* Consolidate handler tracking
- Remove unused code. ci_complete
- unit test fixes. ci_complete
- Restore previous behavior of matching a single handler
- when notifying a host for a handler, return True if it was added, False otherwise, to reduce copied logic
- rename funcitons for clarity. ci_complete
- Remove handler logic for static includes which was disabled previously
Template lookup plugin now support variable_start_string and
variable_end_string, just like template module.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* read_csv: new module to read CSV files
* Add a doc reference to the csvfile lookup plugin
* Enable the use of custom dialect options
* Improve error handling
* Fix PEP8
* Fix more PEP8
* Simplify custom dialect code
* Add integration tests
* Fixes for CI
* Fix for python 2.6
* Add info about loop based on jinja2 loop var
* ansible_loop
* Update test count
* Add extended loop_control that defines whether ansible_loop should be added
* Extended needs to be defaulted
* Revert "Update test count"
This reverts commit f1e93ee469825f4cdcd90fb28667d29aa088275c.
* Add docs about loop_control.extended
* Add revindex and revindex0
* Document ansible_loop in special vars
* Add changelog fragment
* Add tests, change items to allitems so that dot notation works, fix logic error with previtem
* Simplify permission changing code for rabbitmq_user module
* Add check for multiple permission dicts for same host to rabbitmq_user module
* Add docstring for _get_permission method of rabbitmq_user
* Fix method that compares vhost permissions in rabbitmq_user
* Add tests for rabbitmq_user module
* Add helper function for simulating collections.Counter functionality
Incorporating the abandoned work from PRs #35288 and #45552. Also adding in
the version checking from `docker_container.py`, which should be abstracted
out to `docker_common.py`.
* fix py3 scope for unique filter errors, enable filters integration tests on rhel8 beta
Signed-off-by: Adam Miller <admiller@redhat.com>
* add changelog
Signed-off-by: Adam Miller <admiller@redhat.com>
* create local subversion server for tests
* fix sanity issues
* don't touch system config when bringing up site
* removed original setup files
* fix opensuse config
* Changed $IpAddress to $Gateway
* Tweaked win_route unit tests
Checks to see if new static route has the correct gateway
* Create win_route.yaml
* Fixed incorrect variable name
* Fix for changes in clearlinux
clearlinux is now providing /etc/os-release file and ansible is identifying as NA
then this change allow ansible to find it
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add changelog fragment for clearlinux changes
Signed-off-by: Josue David Hernandez Gutierrez <josue.d.hernandez.gutierrez@intel.com>
* Add parameters to module vmware_guest for conversion of disk to thin or thick when vm is cloned or deployed with template
* unit test for convert clone vm
Co-Authored-By: chris93111 <christopheferreira@ymail.com>
* Create python3and2
Adding tests to see if dnf still works when python-2 and python-3 are installed.
* Update main.yml
Include the tests that run on python 2 and python 3, based on the package manager.
* Update dnf.py
Use python3-dnf by default, otherwise python2-dnf.
* Rename python3and2 to python3and2.yml
Rename.
* Add error message for k=v and YAML in a single task
Find the correct line, column, and position for k=v errors since they are different than the position reported initially.
Document bug in quoting syntax check.
* Change tense or error message
Since the error still exists, switch to present tense rather than past tense.
* Remove double spaces after periods in error messages.
http://www.slate.com/articles/technology/technology/2011/01/space_invaders.html
* Add changelog fragment
* Add tests for new error message
* Fix tests
* Add clarifying comments to unit test
* VMware: Fix module usages in module_utils
* Skip test for Python 2.6 as SSL context is not available in Python 2.6
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Support for pids_limit parameter in docker_container module
This add pids_limit parameter support in docker_container module
Fixes#43337
Signed-off-by: Akshay <akshay@localhost.localdomain>
* Add changelog for pids_limit parameter
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Remove unnecessary lines of code
The map is needed if the names are different.
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* Update pids_limit option tests
It also run for docker-py < 1.10.0
Signed-off-by: Akshay Gaikwad <akgaikwad001@gmail.com>
* add redshift_cross_region_snapshots module, unit tests.
* fix errors
* use ec2_argument_spec as the basis for the argument spec. fixed
metadata_version
* follow best practices by naming example tasks.
* code review changes
* fix linting errors
* Update version added
* Only one exit point.
* Refactoring account handling.
* Add diff support for acme_account.
* Insert public_account_key into acme_account_facts result and into acme_account diff.
* Add changelog.
* add new options for na_ontap_aggregate
* add gpl line
* remove dup option
* Put files in wrong directory
* change unit test to match the request from PR 48941
* Changed for review comments
* pep8
* templar: ensure that exceptions are handled
* Fix AttributeError: object has no attribute 'message'
'message' attribute is deprecated since Python 2.6 and not available
with Python 3.
Simple reproducer:
- hosts: localhost
vars:
not_json: "{{ 'test str' | from_json }}"
tasks:
- command: "echo {{ not_json }}"
