earlier versions of eos do not support configuration sessions. this change
will now check if sessions are supported and if not will fallback to
not using config sessions
fixes#4909
This fixes two issues. First, it fixes an issue with the junos_config
module not properly recognizing a file with set commands. The second
bug would cause the diff_config() function to raise an exception due
to a blank line when splitting the config
* Fix imports on nxos_bgp* modules
* Fix imports on nxos_evpn* modules
* Cleanup issues for nxos_facts
* Shuffle imports for nxos_template
* Fix imports on nxos_ospf* modules
* Fix nxos_hsrp
As get_hsrp_groups_in_devices is not actually called anywhere, I presume this
change is reasonable.
* Fix imports on nxos_interface* modules
* Update nxos_static_route imports
* update nxos_vrf
* Update nxos_config imports
dopy 0.3.7 makes use of six but doesn't list it as a requirement. This
means that people installing with pip won't get six installed, leading
to errors. Upstream released dopy-0.3.7a to address that but pip thinks
that is an alpha release. pip does not install alpha releases by
default so users aren't helped by that.
This change makes ansible emit a good error message in this case.
Fixes#4613
The comment argument can be at most 60 characters per the IOS XR command
line. If a comment is > 60 characters, the module will now gracefully error
and return a well formed message.
fixes 5146
on python3, this means that we don't get bytes back by default. We
probably do want bytes here so modify our call to run_command so we get
bytes instead of text.
* Restart EC2 instances with multiple network interfaces
A previous bug, #3234, caused instances with multiple ENI's to fail when being
started or stopped because sourceDestCheck is a per-interface attribute, but we
use the boto global access to it (which only works when there's a single ENI).
This patch handles a variant of that bug that only surfaced when restarting an
instance, and catches the same type of exception.
* Default termination_protection to None instead of False
AWS defaults the value of termination_protection to False, so we don't
need to explicitly send `False` when the user hasn't specified a
termination protection level. Before this patch, the below pair of tasks
would:
1. Create an instance (enabling termination_protection)
2. Restart that instance (disabling termination_protection)
Now, the default None value would prevent the restart task from
disabling termination_protection.
```
- name: make an EC2 instance
ec2:
vpc_subnet_id: {{ subnet }}
instance_type: t2.micro
termination_protection: yes
exact_count: 1
count_tag:
Name: TestInstance
instance_tags:
Name: TestInstance
group_id: {{ group }}
image: ami-7172b611
wait: yes
- name: restart a protected EC2 instance
ec2:
vpc_subnet_id: {{ subnet }}
state: restarted
instance_tags:
Name: TestInstance
group_id: {{ group }}
image: ami-7172b611
wait: yes
```
The Conditional instance will now raise the AddConditionError and this
change instructs eos_command to catch the error and return a nicely formed
error message
Per #3877, the code to wait for spot instance requests to finish would
hang for the full wait time if any spot request failed for any reason.
This commit introduces status checks for spot requests, so if the
request fails, finishes, or is cancelled the task will fail/succeed
accordingly.
One edge case introduced here is tha if a user terminates the instance
associated with the request manually it won't fail the play, under the
presumption that the user *wants* the instance terminated.
The junos_command module wasn't properly parsing strings to apply
conditionals due to the return value not being converted to json
before the results where handed to the runner.
This change is in response to issue #1497 where the apt module would not properly updating the apt cache in some situations and never returned a state change on cache update when the module was used without or without an item to be installed or upgraded.
The change simply allows the apt module to update the cache when update_cache option is used without or without a set cache_valid_time.
If cache_valid_time is set and the on disk mtime for apt cache is ">" the provided amount of seconds, which now has a default of 0, the apt cache will be updated. Additionally if no upgrade, package, or deb is installed or changed but the apt cache is updated the module will return a changed state which will help users to know that the state of the environment has changed due to a task operation, even if it was only an apt cache update.
fixes#1497
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
The junos_config module will generate an exception if a 'delete ...' config
command is attempted to be loaded into a device configuration. This change
will first check to see if the delete command is valid and filter it out
of the change set if it is not valid.
fixes#5040
A value for the project_id parameter to shade's create_network()
call was always being sent, even if no value for 'project' was
supplied. This was breaking folks with older versions of shade
(< 1.6).
Fixes PR https://github.com/ansible/ansible-modules-core/issues/3567
* dict.iteritems does not exist in Python 3
Now just dict.items
six.iteritems handles the change
* Addresses point 1
Unsure if this is a good idea or not.
* Addresses point 2
This shouldn't have any particular change, just marks load_comments as abstract
* Remove unused import
Addresses point 3
* Clarify invalid subset error message
Addresses point 4
The junos_command expects commands to be returned as xml by default but
`show configuration [options]` will return text not xml. This fix
will set the output format for any command that starts with `show
configuration` to text
fixes#4628
The return string from the commands was not being passed through the
jxmlease library and therefore being returned as a string instead of a
json data structure. This also adds back the missing xml key in the
return that includes the raw xml string.
fixes#5001
This fixes a condition where an exception is raised when collecting `interface`
facts and the transport is set to nxapi in the nxos_nxapi module.
fixesansible/ansible#17691
* Fixing bind mount on Linux
* The latest update from jtyr doesn't pass integration tests.
Manually select the changes that are necessary to fix the bug with
unmounting
When setting state=absent the nxos_nxapi module would always try to remove
the configuration regardless of the current state of the device. This will
fix that problem.
This also updates the docstring to correctly reflect https as default=no
fixes#4955
depends on ansible/ansible#17728
Fixes#4063.
Tar does not use this parameter on extraction (-x) or diff (-d)(the
only two cases where it is passed in unarchive). It only uses it on
creation:
https://www.gnu.org/software/tar/manual/html_section/tar_33.html
Providing `unarchive` with a file mode of `0755` (octal) makes it pass
the argument `--mode 493` (493 = 0755 in decimal) to `tar`, which then
fails while verifying it (because it contains an invalid octal char
'9'). Not passing the parameter to tar solves the issue.
* Add support for password aging on Solaris
* Fix shadow file editing when {MIN,MAX,WARN}WEEKS is not set in /etc/default/passwd
* Un-break with python3
* _Really_ un-break with python3
* Pip: handle parsing different pip commands
* Pip: use 'pip list' when available
* Pip: explicitly check which command is used
* Pip: add error checking when fetching packages
* fixed docstring referencing old arguments
* changed out lxml for xml library to avoid import errors
* fixed issue when trying to confirm a commit will end up a NOOP
* fixed issue for passing replace argument to load_config method
* fixes exception thrown when sending commands to device
* fixes exception thrown when retrieving current resource instance
* fixes issue where netconf would be configured in some instances when state
was set to absent
* now returns the command string sent to the remote device
* fixes argument name to be netconf_port with alias to listens_on
Rather than just checking whether a package with the right
name is installed, use `local_nvra` to check whether the
version/release/arch differs too.
Remove `local_name` as it is a shortcut too far.
Fixes#3807Fixes#4529
ansible-doc -vvvv -l show this warning:
[WARNING]: While constructing a mapping from /home/misc/checkout/git/ansible/lib/ansible/modules/core/network/junos/junos_config.py,
line 88, column 5, found a duplicate dict key (required). Using last defined value only.
The eos_eapi module would not configure the port if the protocol wasn't
configured as reported in #4905. This changes the behavior to now allow
the port to be configured independently
fixes#4905
The AWS API requires that any termination policy list that includes
`Default` must end with Default. The attribute sorting caused any list
of attributes to be lexically sorted, so a list like
`["OldestLaunchConfiguration", "Default"]` would be changed to
`["Default", "OldestLaunchConfiguration"]` because default is earlier
alphabetically. This caused calls to fail with BotoServerError per #4069
This commit also adds proper tracebacks to all botoservererror fail_json
calls.
Closes#4069
* added Py2.4 and YAML Documentation fixes
* added no_log for password
* incorporated additional review comments
* remove type for options block
* fix type for pn_multiprotocol
CERN maintains its own fork of "Scientific Linux",
which identifies as "Scientific Linux CERN SLC".
This commit lets Ansible know that this is again
another variant of RHEL.
- Use range instead of xrange.
- Use python3-apt package for python 3.
- Eliminate unsupported for/else/raise usage.
- Use list on dict.items when modifying dict.
- Update requirements documentation.
Also made non-intrustive style fixes (adding blank lines).
Previously calculation of the number of instances that have been
terminated assumed all instances were in the first reservation returned
by AWS. If this is not the case the calculated number of instances
terminated never reaches the number of instances and the module always
times out. By unpacking the instances we get an accurate number and the
module correctly exits.
Currently instances with multiple ENI's can't be started or stopped
because sourceDestCheck is a per-interface attribute, but we use the
boto global access to it (which only works when there's a single ENI).
This patch handles multiple ENI's and applies the sourcedestcheck across
all interfaces the same way.
Fixes#3234
The session keyword is no longer needed or supported in the load_config()
method for eos. This fixes an issue in eos_template where the session
keyword was still being sent.
* remove redundant if submodules_updated
* speed up git by reducing remote commands
* run fetch only once
* run ls-remote less
* don't run ls-remote if one would run fetch anyhow
* remove unnecessary remote_branch check in clone
* kept if depth and version given
* fix fetch on old git versions
The daemonizing code here is taken from an ActiveState recipe, which
includes changing to / as a general best practice. While that is
normally true to allow for deleting the directory that the daemon
process started in, in this case it is not relevant as this is not
intended to be an actual long-running daemon.
Issue ansible/ansible#17466
* Added Solaris support to the mount module.
* Added checking so that if a non-standard fstab file is specified it will
still work in Solaris without breaking existing functionality.
* Added a check to avoid writing duplicate vfstab entries on Solaris
* Added "version_added" to new boot option
This means we will have to unarchive the complete archive if a single change is found.
Unfortunately we cannot fix this for `unzip`, the only hope is a pure-python reimplementation.
This fixes problems reported in the comments of #3810
os.getlogin() returns the user logged in on the controlling terminal. However
'crontab' only looks for the login name of the process' real user id which
pwd.getpwuid(os.getuid())[0] does provide.
While in most cases there is no difference, the former might fail under certain
circumstances (e.g. a lxc container connected by attachment without login),
throwing the error 'OSError: [Errno 25] Inappropriate ioctl for device'.
* 'before' and 'after' are now only applied to 'lines'
* remove update argument
* update doc strings
* add path argument when performing config difference
* removes update argument
* adds `config` option to replace argument
* moves session management into shared module
* cleans up doc strings
* `before` and `after` args now only apply to lines
If you apply `wait=yes` and use `instance_tags` as your filter for
stopping/starting EC2 instances, this stack trace happens:
```
An exception occurred during task execution. The full traceback is: │~
Traceback (most recent call last): │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1540, in <module> │~
main() │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1514, in main │~
(changed, instance_dict_array, new_instance_ids) = startstop_instances(module, ec2, instance_ids, state, instance_tags) │~
File "/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py", line 1343, in startstop_instances │~
if len(matched_instances) < len(instance_ids): │~
TypeError: object of type 'NoneType' has no len() │~
│~
fatal: [localhost -> localhost]: FAILED! => {"changed": false, "failed": true, "invocation": {"module_name": "ec2"}, "module_stderr": "Traceb│~
ack (most recent call last):\n File \"/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1540, in <module>\n main()\n File \"/tmp/│~
ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1514, in main\n (changed, instance_dict_array, new_instance_ids) = startstop_instances│~
(module, ec2, instance_ids, state, instance_tags)\n File \"/tmp/ryansb/ansible_FwE8VR/ansible_module_ec2.py\", line 1343, in startstop_insta│~
nces\n if len(matched_instances) < len(instance_ids):\nTypeError: object of type 'NoneType' has no len()\n", "module_stdout": "", "msg": "│~
MODULE FAILURE", "parsed": false}
```
That's because the `instance_ids` variable is None if not supplied
in the task. That means the instances that result from the instance_tags
query aren't going to be included in the wait loop. To fix this, a list
needs to be kept of instances with matching tags and that list needs to
be added to `instance_ids` before the wait loop.
* Ensure unicode characters in zip-compressed filenames work correctly
Another corner-case we are fixing hoping it doesn't break anything else.
This fixes:
- The correct encoding of unicode paths internally (so the filenames we scrape from the output and is returned by zipfile match)
- Disable LANG=C for the unzip command (because it breaks the unicode output, unlike on gtar)
* Fix for python3 and other suggestions from @abadger
Before this, all spot instance requests would fail because the code
_always_ called module.fail_json when the parameter was set (which it
always was, because the module parameter's default was set to 'stop').
As the comment said, this parameter doesn't make sense for spot
instances at all, so the error message was also misleading.
* fixes issue where configuration was not being loaded (#4704)
* fixes issue where defaults were not included when argument was set to True
tested on EOS 4.15.4F
When the configuration is compared and the results deserialized, the
dumps() function returns a string. This cohereces the return to a list
in case before and/or after needs to be applied
fixes 4707
