* add key_data argument
The key_data argument helps when using a private key stored in Vault.
* Add "version_added" line
Add version_added line to pass automated tests.
* remove unnecessary nesting
* Adding iam_password_policy module
* fixing various issues -- error handling, bugs
* fixing various issues based on tests
* renaming dummy var
* fixing type reference in documentation
* adding int tests and other updates
* removing typo
* fixing auth for int tests
* removing int tests for now
* readding integration tests w/ unsupported designation
* removing conflicting group
* Update aliases
* Fix unused variable
* removed hardcoded loader/plugins list
* updated a few errors to keep orig object
* fix httpapi/cliconf listing
* ansible-doc fixes
* show undocumented as UNDOCUMENTEd
* added missing undoc
* Add support for IOS vlan parsing filter.
Example usage below:
{% set parsed_vlans = vlans | vlan_parser %}
switchport trunk allowed vlan {{ parsed_vlans[0] }}
{% for i in range (1, parsed_vlans | count) %}
switchport trunk allowed vlan add {{ parsed_vlans[i] }}
* Update test_network.py
Add import statement for filter
* Fixed PEP8 issues relating to comments
* Fix PEP8 issues related to blank lines
* Removed magic numbers for line lengths. This should generalize support
to other IOS-like NOS that use similar methods for listing vlans. The
default arguments for line lengths will still be specific to Cisco IOS.
The unit tests for line length are still specific to Cisco IOS.
* An earlier optimization of ansible-doc -l caused failures.
The optimization quickly searches the plugin code for short_description
fields and then uses that in the -l output. The searching was a bit too
naive and ended up pulling out malformed yaml. This caused those
plugins to be omitted from the list of plugins of that type with
a warning that their documentation strings were wrong.
This change makes the documentation parser aware that the documentation
string could have a relative indent for all of its fields which makes it
robust in the face of this particular problem.
* Don't search for space after short_description:
Any whitespace would be valid. In particular newline
1. Add support for SCSI controller creation
2. Support for SCSI Type
3. Warn about Disk Unit Number 7
4. Allow specifying SCSI controller
5. Allow specifying Disk Unit Number
6. Idempotency
7. Remove disks
8. Do not allow to reduce disk
9. More than 15 disks support
10. No SCSI controller and unit number check
11. Thin support
12. Update documentation and example
13. Multiple Datastore and datastore cluster support
14. Check datatype of disk unit number and SCSI controller
15. Handle disk_size when it is int or float
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Update pydoc
* Update module documentation and example
* Add aliases for name as creation_token
Fixes: #28738
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Added secure boot enable/disable to vmware_guest_boot_manager. Also added its state to facts
* VMware does not support secure boot when boot_firmware is bios. Add some guardrails to protect the user from misconfiguration
* Address review comments
When multiple virtual machines or templates are found in environment,
module needs folder path. This fix adds facility to specify folder path
for template or virtual machine if multiples are found.
Fixes: #37087
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* Fix in confirmed_commit capability in netconf_config modules
Fixes#46804
* If confirm value is greater than zero or confirm_commit option is set and confirmed-commit
capability is not supported but Netconf server only in that case fail the module
* Update confirm-commit flag
* Minor changes
* Don't execute mount or umount in check mode
* The datastore was mounted or unmounted when you execute the playbook in
check mode.
* Test if running in check mode before mounting or unmounting the
datastore.
* Add support for NFS v4.1 datastores
* Move ansible.compat.tests to test/units/compat/.
* Fix unit test references to ansible.compat.tests.
* Move builtins compat to separate file.
* Fix classification of test/units/compat/ dir.
Python sets the SIGPIPE handler to SIG_IGN. On execv() signal handlers are
reset to their defaults, EXCEPT those that are SIG_IGN which are left ignored.
In Python 3 subprocess.popen explicitly resets the SIGPIPE handler to SIG_DFL,
but unfortunately in Python 2.7 it does not. This leads to subprocesses being
executed with SIGPIPE ignored. This is often a problem with bash scripts which
rely on SIGPIPE to terminate commands in a pipe, but can easily be a problem
with other applications.
This implements the Python 3 behaviour for Python 2.7 by using a preexec_fn.
Adding a value to an attribute or removing a value from an attribute of a LDAP entry throws the exception TypeError: object of type 'filter' has no len()
* Update win_scheduled_task.py to document that the duration of a task trigger can be null, which will cause it to run indefinitely - docs update makes use of suboptions
* Add a fix for the validate-modules schema
* Locate prtdiag even when absent from /usr/bin
On Solaris 8 hosts, this prevents fact collection from aborting with:
Argument 'args' to run_command must be list or string
* Lint fix.
* Style: pass /usr/platform/.../sbin as optional path to get_bin_path().
* Making username password etc non mandatory as we use persistence connection.
Some documentation fine tuning also done.
* To update version which was tested against.
* Adding Bacon switch (NE0152T) to device rules
* Qalthos Review catch
* Updating version
* Changing documentation to add Bacon switch. This is effective since 2.8
* Add url_username and url_password options for url lookup
* Update url.py
Fix documentation
* Fix options documentation
Default value for url_password and url_username is None not an empty string
* Add version added to documentation
* Break command over multiple lines to fix linting
* Fix more linting
* Update version_added in url.py to 2.8
Switches will accept the previously used syntax for /32 ACL entries, but they get changed to host ipaddress in the config file.
This results in the config check failing every time (permit ip 1.1.1.1/32 any log != permit ip host 1.1.1.1 any log), resulting in the ACL getting re-created on every single run of the Playbook.
Making this proposed change to the example will make it work in an idempotent manner.
+label: docsite_pr
This fix initializes current_version to None so that
module proceeds in check mode.
Fixes: #46654
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
If enable_snat is False, this should be used to build the
request, because the default value in the OpenStack Networking
API is True.
Fixes the issue #45915.
* ios_facts: Fix LLDP gathering without neighbors
When LLDP is enabled but no neighbors are present, the following
structure is generated:
...
"ansible_net_neighbors": {
"null": [
{
"host": null,
"port": null
}
]
},
...
If we are not able to find any relevant LLDP information, bail out early
so cases like shown above are handled more gracefully.
* ios_facts: Remove trailing space in lineprotocol
Some Cisco devices (at least CSR1000V 16.6.4) add a space after the
line protocol. This causes the space to be present in the result of
fact gathering:
"ansible_net_interfaces": {
"GigabitEthernet2": {
...
"lineprotocol": "up ",
Be more clear about scanning the output to avoid this behaviour.
* adding explanation of replace_all_instances
How does "replace_all_instances" work? does it increase the number of instances by 1 in the Load balancer and it scales in a server and waits for it to complete its health check, OR does it terminate a node a that causes an autoscale event to happen and then adds a new server?
+label: docsite_pr
* Enable communication to management API over HTTPS.
* Specify version added tags to new parameters
* Set proper parameter type.
* Corrected version_added numbers.
* Extracted commons to ansible utils.
* Fix PEP8 error
* Fix documentation extension syntax.
Fixes#22953
When python is compiled in debug mode, or certain command line flags are
passed, python issues helpful warnings to let users know of files opened
by not closed.
This can be fairly spammy on an ansible run. This change reduces the
number of such warnings by a factor of 10.
* Remove unnecessary workaround
* add test: set RABBITMQ_NODENAME environment variable
The following error occurs:
TASK [rabbitmq_user : Add user] ***
fatal: [testhost]: FAILED! => {
"changed": false,
"cmd": "/usr/sbin/rabbitmqctl -q list_users",
"rc": 69,
"msg": "Error:********@c65c2bc59398'. Please see diagnostics information and suggestions below.\n\nMost common reasons for this are:\n\n * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)\n * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)\n * Target node is not running\n\nIn addition to the diagnostics info below:\n\n * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more\n * Consult server logs on node test@c65c2bc59398\n\nDIAGNOSTICS\n===========\n\nattempted to contact:********@c65c2bc59398\n * effective user's home directory: /var/lib/rabbitmq\n * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==",
"stderr": [...],
"stderr_lines": [
"Error: unable to perform an operation on node 'test@c65c2bc59398'. Please see diagnostics information and suggestions below.", "",
"Most common reasons for this are:", "",
" * Target node is unreachable (e.g. due to hostname resolution, TCP connection or firewall issues)",
" * CLI tool fails to authenticate with the server (e.g. due to CLI tool's Erlang cookie not matching that of the server)",
" * Target node is not running", "",
"In addition to the diagnostics info below:", "",
" * See the CLI, clustering and networking guides on http://rabbitmq.com/documentation.html to learn more",
" * Consult server logs on node test@c65c2bc59398", "",
"DIAGNOSTICS", "===========", "",
"attempted to contact: [test@c65c2bc59398]", "",
"test@c65c2bc59398:",
" * connected to epmd (port 4369) on c65c2bc59398",
" * epmd reports: node 'test' not running at all",
" other nodes on c65c2bc59398: [rabbit]",
" * suggestion: start the node", "",
"Current node details:",
" * node name: rabbitmqcli2@c65c2bc59398",
" * effective user's home directory: /var/lib/rabbitmq",
" * Erlang cookie hash: 3MxcYFrJzfhEL+FlUfLlQw==", ""
],
"stdout": "",
"stdout_lines": []
}
* node parameter: fix default value
'rabbit' is the default value mentioned in the module documentation.
This fix checks if executable exists in local connection specified using
ANSIBLE_EXECUTABLE variable.
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* module_utils.urls: add fetch_file function
* apt: use fetch_file instead of own download()
* unarchive: use fetch_file instead of own codecopy
* apt: add test for deb=http://…
* unarchive: add test for a remote file download and unarchive
* yum: replace fetch_rpm_from_url by fetch_file
* use NamedTemporaryFile
* don't add a dot to fileext, it's already there
* allow update_cache as stand alone operation for yum/dnf
Fixes#40068
Signed-off-by: Adam Miller <admiller@redhat.com>
* make sanity tests happy
Signed-off-by: Adam Miller <admiller@redhat.com>
On connection errors the influxdb python module raises an exception with
an empty message leading to a fail_json with an empty error message:
265d14736b/influxdb/influxdb08/client.py (L252)
Fail with a more descriptive error in this case.
Currently, Ansible interprets variables with a True|False value as
boolean. This causes the vmware_deploy_ovf module to break, because
it can only accept string values as properties.
This fix checks if a value is boolean, and converts it to a string
if it is. Since integers do not seem to be causing the same error, this
is the only check we appear to need.
After completion, OVF properties that are boolean can be specified as
yes|no or true|false.
Closes: #45528
* Add chdir support to win_package
* Add chdir support to uninstall too.
* Update docs to account for uninstall.
* Correct variable substitution for hashtable.
* added changelog fragment
* Added module to manage manageiq tenants
* Fixed pep8 and module validation issues for manageiq_tenant
* Changes based on review
- Added parent attribute to specify the parent
- Cleanup return of tenant
- Update documentation on quotas
* Updated version added to 2.8
* Allow to specify images by hash for docker_container and docker_image_facts.
* flake8
* More sanity checks.
* Added changelog.
* Added test.
* Make compatible with Python < 3.4.
* Remove out-commented imports.
* Don't simply ignore container in present() if image is not specified.
* Use image from existing container for recreation if not specified.
* Added changelog.
* Improve comment.