* Begin using ArgumentSpecValidator in AnsibleModule
* Add check parameters to ArgumentSpecValidator
Add additional parameters for specifying required and mutually exclusive parameters.
Add code to the .validate() method that runs these additional checks.
* Make errors related to unsupported parameters match existing behavior
Update the punctuation in the message slightly to make it more readable.
Add a property to ArgumentSpecValidator to hold valid parameter names.
* Set default values after performining checks
* FIx sanity test failure
* Use correct parameters when checking sub options
* Use a dict when iterating over check functions
Referencing by key names makes things a bit more readable IMO.
* Fix bug in comparison for sub options evaluation
* Add options_context to check functions
This allows the parent parameter to be added the the error message if a validation
error occurs in a sub option.
* Fix bug in apply_defaults behavior of sub spec validation
* Accept options_conext in get_unsupported_parameters()
If options_context is supplied, a tuple of parent key names of unsupported parameter will be
created. This allows the full "path" to the unsupported parameter to be reported.
* Build path to the unsupported parameter for error messages.
* Remove unused import
* Update recursive finder test
* Skip if running in check mode
This was done in the _check_arguments() method. That was moved to a function that has no
way of calling fail_json(), so it must be done outside of validation.
This is a silght change in behavior, but I believe the correct one.
Previously, only unsupported parameters would cause a failure. All other checks would not be executed
if the modlue did not support check mode. This would hide validation failures in check mode.
* The great purge
Remove all methods related to argument spec validation from AnsibleModule
* Keep _name and kind in the caller and out of the validator
This seems a bit awkward since this means the caller could end up with {name} and {kind} in
the error message if they don't run the messages through the .format() method
with name and kind parameters.
* Double moustaches work
I wasn't sure if they get stripped or not. Looks like they do. Neat trick.
* Add changelog
* Update unsupported parameter test
The error message changed to include name and kind.
* Remove unused import
* Add better documentation for ArgumentSpecValidator class
* Fix example
* Few more docs fixes
* Mark required and mutually exclusive attributes as private
* Mark validate functions as private
* Reorganize functions in validation.py
* Remove unused imports in basic.py related to argument spec validation
* Create errors is module_utils
We have errors in lib/ansible/errors/ but those cannot be used by modules.
* Update recursive finder test
* Move errors to file rather than __init__.py
* Change ArgumentSpecValidator.validate() interface
Raise AnsibleValidationErrorMultiple on validation error which contains all AnsibleValidationError
exceptions for validation failures.
Return the validated parameters if validation is successful rather than True/False.
Update docs and tests.
* Get attribute in loop so that the attribute name can also be used as a parameter
* Shorten line
* Update calling code in AnsibleModule for new validator interface
* Update calling code in validate_argument_spec based in new validation interface
* Base custom exception class off of Exception
* Call the __init__ method of the base Exception class to populate args
* Ensure no_log values are always updated
* Make custom exceptions more hierarchical
This redefines AnsibleError from lib/ansible/errors with a different signature since that cannot
be used by modules. This may be a bad idea. Maybe lib/ansible/errors should be moved to
module_utils, or AnsibleError defined in this commit should use the same signature as the original.
* Just go back to basing off Exception
* Return ValidationResult object on successful validation
Create a ValidationResult class.
Return a ValidationResult from ArgumentSpecValidator.validate() when validation is successful.
Update class and method docs.
Update unit tests based on interface change.
* Make it easier to get error objects from AnsibleValidationResultMultiple
This makes the interface cleaner when getting individual error objects contained in a single
AnsibleValidationResultMultiple instance.
* Define custom exception for each type of validation failure
These errors indicate where a validation error occured. Currently they are empty but could
contain specific data for each exception type in the future.
* Update tests based on (yet another) interface change
* Mark several more functions as private
These are all doing rather "internal" things. The ArgumentSpecValidator class is the preferred
public interface.
* Move warnings and deprecations to result object
Rather than calling deprecate() and warn() directly, store them on the result object so the
caller can decide what to do with them.
* Use subclass for module arg spec validation
The subclass uses global warning and deprecations feature
* Fix up docs
* Remove legal_inputs munging from _handle_aliases()
This is done in AnsibleModule by the _set_internal_properties() method. It only makes sense
to do that for an AnsibleModule instance (it should update the parameters before performing
validation) and shouldn't be done by the validator.
Create a private function just for getting legal inputs since that is done in a couple of places.
It may make sense store that on the ValidationResult object.
* Increase test coverage
* Remove unnecessary conditional
ci_complete
* Mark warnings and deprecations as private in the ValidationResult
They can be made public once we come up with a way to make them more generally useful,
probably by creating cusom objects to store the data in more structure way.
* Mark valid_parameter_names as private and populate it during initialization
* Use a global for storing the list of additonal checks to perform
This list is used by the main validate method as well as the sub spec validation.
When using "use_regex: yes" and setting an excludes: without
specifying a pattern: the existing code passes the file-glob '*' to
the regex matcher. This results in an internal invalid-regex
exception being thrown.
This maintains the old semantics of a default match-all for pattern:
but switches the default to '.*' when use_regex is specified.
The code made sense as-is before excludes: was added (2.5). In that
case, it made no sense to set use_regex but *not* set a pattern.
However, with excludes: it now makes sense to only want to exclude a
given regex but not specify a specific matching pattern.
Closes: #50067
* moved change to new location
added changelog
* Update lib/ansible/modules/find.py
Co-authored-by: Ian Wienand <iwienand@redhat.com>
* Fix a bug adding unrelated candidates to the plugin loader redirect_list
* Add tests for the redirect list
* test redirect list for builtin module
* test redirect list for redirected builtin module
* test redirect list for collection module
* test redirect list for redirected collection module
* test redirect list for legacy module
* changelog
Ansible can gather distribution facts for older Amazon Linux
with /etc/os-release data.
Fixes: #73946
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
* ansible-pull: run all playbooks when multiple are supplied
* add test for ansible-pull with multiple playbooks supplied from cli
* add changelog fragment
* Catch more potential errors (and increase false-positive rate).
* Flag some false-positives in lib/ansible/modules/ with no_log=False.
Co-authored-by: John Barker <john@johnrbarker.com>
* add optional module_utils import support
Treat core and collections module_utils imports nested within any Python block statement (eg, `try`, `if`) as optional. This allows Ansible modules to implement runtime fallback behavior for missing module_utils (eg from a newer version of ansible-core), where previously, the module payload builder would always fail when unable to locate a module_util (regardless of any runtime behavior the module may implement).
* sanity test fixes
ci_complete
* finish migrating ssh plugin to config system
fixes#72739fixes#57220
* fix connection detection in reset
* correct options for connection meta reset
Co-authored-by: David Shrewsbury <Shrews@users.noreply.github.com>
The file module changes existing sym links from relative to absolute
if the src is not stated in the tasks since it uses `os.path.realpath`
to fetch the link source and not `os.readlink`. Changed that.
* galaxy: restore left hand slicing in assignment
Fix 'ansible-galaxy role init --role-skeleton=role-skeleton' when the role skeleton
contains an ignored directory.
The issue was because the 'dirs' variable was changed to reference a different list,
but needs to be mutated instead to stop os.walk from traversing ignored directories.
Fixes: #71977
Co-authored-by: Abhijeet Kasurde <akasurde@redhat.com>
Change:
- Fix regression: unhandled exception when given inventory directory
is empty or contains empty subdirectories.
- Fix unhandled exception when limit file is actually a directory
instead of a file.
- Fix inventory tests which previously could never fail due to missing
`set -e`. Fixed up tests that failed after `set -e` was added. Added
several tests.
Test Plan:
- New tests
- Fixed existing tests which previously could never fail
Tickets:
- Fixes#73658
Signed-off-by: Rick Elrod <rick@elrod.me>
* Manage the in-memory cache in _call_galaxy but let the caller set the file cache after getting paginated results
* Add a test for caching successful and not caching unsuccessful paginated results
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Initial import of modified version of alikins' code
* Add unit testing for new Role methods
* Fix validate_arg_spec module for sanity test. Add test_include_role_fails.yml integration test from orig PR.
* Add testing of suboptions
* Use new ArgumentSpecValidator class instead of AnsibleModule
* fix for roles with no tasks, use FQ name of new plugin
* Add role dep warning
Allow constructed to optionally use vars plugin data
* mostly for those looking to leverage group_vars/ and host_vars/
* limited to already processed sources
Ensure `yamllint`'s `check_assignment()` correctly ignore the
attribute assignment. Those don't have any `.id` attribute and will
trigger an `AttributeError` exception.
See: https://github.com/ansible/ansible/pull/73322
Only add data when there is data to add
also avoid clobbering existing data with empty file
fixes#45843
* remove redundant code, update comments
* fix mock dataloader, original does not return None
* added test
* module compat for py3.8+ controller
* replaced internal usages of selinux bindings with internal ctypes binding (allows basic selinux operations from any Python interpreter), plus tests
* added new respawn_module API to allow modules to import Python packages that are only available under a well-known interpreter, plus tests
* added respawn logic to modules that need Python libs from a specific system interpreter (apt, apt_repository, dnf, yum)
minimize internal HAVE_SELINUX usage
spurious junk
pep8
* pylint fixes
* add RHEL8 Python 3.8 testing
* more pylint
* import sanity
* unit tests
* changelog update
* fix a bunch of stuff
* tweak changelog
* fix setup_rpm_repo on EL8
* misc sanity/test fixes
* misc feedback tweaks
* fix import fallback in test module
* fix selinux MU test
* fix dnf tests to avoid python-dependent test packages
* add trailing LFs to aliases
* fix yum tests to avoid test package with Python deps
* hack create_repo for EL6 to create noarch package
* Upgrade pylint and deps in ansible-test.
* Enable pylint on Python 3.9.
* Update pylint config.
* Add ignore for vendored six.
* Add ignores for support plugins.
* Fix issue reported by pylint.
When running in verbosity <2, display the file and line number for tasks that fail. This provides
useful information without having to run at increased verbosity.
* Move _print_task_path to CallbackBase class
* Add integration tests
* Add color parameter to _print_task_path()
* Keep color output consistent for now
Currently the path is display with COLOR_DEBUG formatting with verbosity >= 2.
Instead of the color of the path changing based on verbosity level, just keep it at the
currently behavior of COLOR_DEBUG. Having the color of the same information change
based on verbosity level seems incorrect and makes visual parsing of the information
more difficult.
Co-authored-by: tahar.jegham <jeghamseifeddine@gmail.com>
* Docker content from community.general migrated to community.docker.
* Hetzner Robot content from community.general migrated to community.hrobot.
* RouterOS content from community.network migrated to community.routeros.
* PostgreSQL content from community.general migrated to community.postgresql.
* OC content from community.general migrated to community.okd.
* Cisco NSO content from community.network migrated to cisco.nso.
* Add changelog fragment.
* Google content from community.general migrated to community.google.
* Hashi Vault content from community.general migrated to community.hashi_vault.
* KubeVirt content from community.general migrated to community.kubevirt.
* FortiOS content from community.network migrated to community.fortios.
* Update changelog fragment.
* DellEMC content from community.general migrated to dellemc.openmanage.
* treat oracle same as rhel/centos
* fix misunderstood use of yaml anchors
* add changelog fragment
* Update changelogs/fragments/73498-INTERPRETER_PYTHON_DISTRO_MAP-Treat-oracle-same-as-rhel-centos.yml
* Include all collections in single json object / yaml document
* Add tests
* For galaxy list yaml/json output, use dictionary of dictionaries instead of list
* Add tests for listing single collection in yaml / output format
* --output -> --format
* Add explicit test for listing collection in human format
* Fix bug where empty json object was emitted + add test
* add changelog fragment for #71979 (ca_path for uri)
* add integration tests for ca_path in the uri module
* return path of ca cert instead of its content
* connect to port 444 on self_signed_host
and use quay.io/ansible/http-test-container:1.3.0
* state that the certificate in ca_path is used for validation
* Fix regression introduced in b77abd0491 causing bug in inventory modules which break functionality in user setting use_contrib_script_compatible_sanitization parameter.
* Add changelog
Co-authored-by: s-hertel <19572925+s-hertel@users.noreply.github.com>
* introduce self-signed.ansible.http.tests
* forwarding of port 444
* forward port 8444 to port 444 on http test container
* Fix port forwarding for Windows under docker
* add changelog fragment
Co-authored-by: Jordan Borean <jborean93@gmail.com>
* validate_modules: fails with .id attribute not found
This patch addresses a problem in the `found_try_except_import` test.
This module tries to identify lines like:
`HAS_FOO = True`
In this case, the target (`HAS_FOO`) is of type `ast.Name` and has a
`id` attribute which provide the name.
In my case, I've a line that set a module attribute`. In this case, the
target (`module.var`) has the type `ast.Attribute` and no `id`
attribute. The code trigger an `AttributeError` exception.
This patch ensures we compare a `ast.Name`.
* Update test/lib/ansible_test/_data/sanity/validate-modules/validate_modules/main.py
Change:
- Remove check that states that only Fedora can be an OSTree
distribution.
- This allows us to correctly return "atomic_container" as the pkg_mgr
fact for RHEL for Edge, Fedora/RHEL/CentOS Atomic Host, etc.
Test Plan:
- Created local RHEL for Edge image and tested against it.
- Tested against regular RHEL 8 and still got `dnf` as expected.
- Tested against RHEL 7 Atomic Host and got `atomic_container` now.
- New unit tests.
Tickets:
- Fixes#73084
Signed-off-by: Rick Elrod <rick@elrod.me>
ansible-galaxy currently behaves bad then a role to be installed
contains ~ or $ at any place in the path of a file in that role.
It extracts the parent directory of the offending path level as an
empty file. This explodes if that directory contains anything else.
Change this behaviour. `~` is now allowed allowed when it is
not a full level (Yes: `some~thing/`, no: `~/`). The code should
get refactoring in an other PR.
The `UserFactCollector` queries the user login name via
`getpass.getuser()` and looks up the corresponding entry
in the password database.
The login name may differ from the actual user name,
eg. if the `LOGNAME` env variable is set. The lookup
fails in this case. Added a fallback in this case that
tries to get the entry via the user ID.
This warning was intended to help improve test environment configuration.
However, it has ended up producing mostly non-actionable warning noise instead.
In most situations a missing pip or python should result in test failures.
Reporting a missing pip also implies that it should be used by tests, which is not the case.
Tests should be invoking pip as a python module with the appropriate python interpreter instead.
Change detection and check mode fixes for apt_key
* allow apt-key to use proxies
* add note about deprecation of apt-key itself
* expanded error msgs
* show all keys
* fix short_format parsing
* added more return info and documented it
PR #72591
This change:
* Adds an artifacts manager that abstracts away extracting the
metadata from artifacts, downloading and caching them in a
temporary location.
* Adds `resolvelib` to direct ansible-core dependencies[0].
* Implements a `resolvelib`-based dependency resolver for
`collection` subcommands that replaces the legacy
in-house code.
This is a dependency resolution library that pip 20.3+ uses
by default. It's now integrated for use for the collection
dependency resolution in ansible-galaxy CLI.
* Refactors of the `ansible-galaxy collection` CLI.
In particular, it:
- reimplements most of the `download`, `install`, `list` and
`verify` subcommands from scratch;
- reuses helper bits previously moved out into external modules;
- replaces the old in-house resolver with a more clear
implementation based on the resolvelib library[0][1][2].
* Adds a multi Galaxy API proxy layer that abstracts accessing the
version and dependencies via API or local artifacts manager.
* Makes `GalaxyAPI` instances sortable.
* Adds string representation methods to `GalaxyAPI`.
* Adds dev representation to `GalaxyAPI`.
* Removes unnecessary integration and unit tests.
* Aligns the tests with the new expectations.
* Adds more tests, integration ones in particular.
[0]: https://pypi.org/p/resolvelib
[1]: https://github.com/sarugaku/resolvelib
[2]: https://pradyunsg.me/blog/2020/03/27/pip-resolver-testing
Co-Authored-By: Jordan Borean <jborean93@gmail.com>
Co-Authored-By: Matt Clay <matt@mystile.com>
Co-Authored-By: Sam Doran <sdoran@redhat.com>
Co-Authored-By: Sloane Hertel <shertel@redhat.com>
Co-Authored-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
Signed-Off-By: Sviatoslav Sydorenko <webknjaz@redhat.com>
While getting policy name in get_chain_policy API,
module does not require any additional parameters except chain
Enabling flag in get_chain_policy API call fixes this.
Fixes: #68612
Signed-off-by: Abhijeet Kasurde <akasurde@redhat.com>
Use correct ssh executable and options in all cases on connection plugin
* Also nicer naming/comments
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
Ability to add local variables into AnsibleJ2Vars was added in
18a9eff11f to fix#6653. Local variables
are added using ``AnsibleJ2Vars.add_locals()`` method when creating a
new context - typically when including/importing a template with
context. For that use case local template variables created using
``set`` should override variables from higher contexts - either from the
play or any parent template, or both; Jinja behaves the same way.
Also removes AnsibleJ2Vars.extras instance variable which is not used.
Also adds missing test for #6653.
Fixes#72262Fixes#72615
ci_complete
The `command` module does not return stdout & sterr when calling
a non existing executable or an unknown exception arises. This fix
lets the module return empty byte strings in those cases.
Change:
- Add Ubuntu 20.04 to CI now that venv is default instead of virtualenv in ansible-test.
Test Plan:
- CI
Tickets:
- Fixes#69203
Signed-off-by: Rick Elrod <rick@elrod.me>
The init script for the test container writes additional lines to
the .bashrc of the user. This was done via a `cat` multiline
instruction, which is implemented internally by writing a
temporary file to TMPDIR (/tmp in this case) first. Docker fails
to provide /tmp just after creation, which results in a race
condition that rarely makes the init fail. Changed the `cat`
statement to multiple `echo`s.
Co-authored-by: Matt Clay <matt@mystile.com>
When calling compile(), the filename argument should be either a real file
name or a string. According to Python docs, suggested one is '<string>'.
Keep the current behaviour (encapsulate the actual expression),
but enclose it into angle brackets.
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
* Fix YAML error message when error is at the end of the file
If a YAML file fails to load due to a syntax error in a file, or there is an error in the last line of a
file, PyYAML reports the last line number of the file as the index where the error occurred.
When reading the file lines, we use that index to the get the relevant line. If the index value is out
of range, the relevant line is lost for error reporting.
Subtract one from the index value to avoid the IndexError in this specific scenario. It is possible
to still get an IndexError, which will be handled as it is currently.
* Update existing tests and add new tests
* Allow restricting config values to enumerated list
* dont document internal entries
* also ignore private defs for ansible-config
* remove invalid value from tests
* added porting entry
When the pause module is run in the background and seconds parameter is provided,
do not warn.
* Add tests
* Fix existing tests
The test wasn't failing when it should have.
Change:
- On CentOS Stream, make distribution_release be "Stream"
- On CentOS Core, it continues to be "Core"
- Implement custom distribution file parser for CentOS, so we can look
for "CentOS Linux" and "CentOS Stream"
- Two new fixtures introduced (CentOS Linux 8.1 and CentOS Stream 8)
- Removed two dicts from `Distribution` class that were seemingly not
used anywhere.
Test Plan:
- ci_complete
- New test fixtures
Tickets:
- Fixes#73027
Signed-off-by: Rick Elrod <rick@elrod.me>
* Remove unused code in ansible-test.
* Remove obsolete endpoint logic from ansible-test.
* Remove obsolete region selection in ansible-test.
* Remove obsolete port logic in ansible-test.
* Clean up ansible-test remote providers.
Do the right thing on Linux when password lock and a password hash are provided by writing
out the password hash prepended by the appropriate lock string rather than using -U and -L.
This is the correct way to set and lock the account in one command.
On BSD, run separate commands as appropriate since locking and setting the password cannot
be done in a single action.
FreeBSD requires running several commands to get the account in the desired state. As a result,
the rc, output, and error from all commands need to be combined and evaluated so an accurate
and complete summary can be given at the end of module execution.
* Improve integration tests to cover this scenario.
* Break up user integration tests into smaller files
* Properly lock account when creating a new account and password is supplied
* Simplify rc collection in FreeBSD class
Since the _handle_lock() method was added, the rc would be set to None, which could make
task change reporting incorrect. My first attempt to solve this used a set and was a bit too
complicated. Simplify it my comparing the rc from _handle_lock() and the current value of rc.
* Improve the Linux password hash and locking behavior
If password lock and hash are provided, set the hash and lock the account by using a password
hash since -L cannot be used with -p.
* Ensure -U and -L are not combined with -p since they are mutually exclusive to usermod.
* Clarify password_lock behavior.
Tests should use the Python built-in ``venv`` module on Python 3 instead of the standalone ``virtualenv`` module.
On Python 2 the ``virtualenv`` module continues to be the only option.
The version installed is either the OS packaged version or the last release to support Python 2, which is version 16.7.10.
Change:
- Internally, use dnf.subject.Subject#get_best_query for state: absent
- Add a bunch of tests for removing packages, given a bunch of different
pkg specs (nv, nvr, nvra, wildcard, etc.)
Test Plan:
- New tests
- Local experiments with DNF API via PDB.
Tickets:
- Fixes#72809
Signed-off-by: Rick Elrod <rick@elrod.me>
Change:
- Changes to make F33 work with current tests
- Add F33 to docker.txt
- Add F33 to AZP config
Test Plan:
- ci_complete
Signed-off-by: Rick Elrod <rick@elrod.me>
* Replace the use of the function string.replace() with the method str.replace()
because that's what works for both Python 2 and 3.
* Cleanup the unused string import.
Added a changelog fragment.
* The documentation for os.write() seems a bit iffy, but in Python 3 we
definitely cannot pass it a string and we need to encode it into
bytes.
The Python documentation at
https://docs.python.org/3/howto/pyporting.html#text-versus-binary-data
says that this code will work in Python 2 as well.
Co-authored-by: Lloyd Parkes <lloyd@must-have-coffee.gen.nz>
Change:
- The FreeBSD release can contain -RC or -PRERELEASE in addition to
-RELEASE, -STABLE, or -CURRENT.
Test Plan:
- Added new fixed from an RC version of TrueNAS which uses a -PRERELEASE
version of FreeBSD.
Tickets:
- Fixes#72331
Signed-off-by: Rick Elrod <rick@elrod.me>
* ExecutionPolicy default value is RemoteSigned
##### SUMMARY
In Windows setup steps, settings `ExecutionPolicy` is restored to value `Restricted`. But actually default value for Windows server is not `Restricted` but `RemoteSigned` ([source](https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.core/about/about_execution_policies?view=powershell-7.1#default)).
I have got issue with `win_dsc` because `ExecutionPolicy` was `Restricted`.
##### ISSUE TYPE
- Docs Pull Request
+label: docsite_pr
* Add changelog fragment
* Apply suggestions from code review
Co-authored-by: Sandra McCann <samccann@redhat.com>
* arg_spec - move type checking lookup method to a function
* Change get_wanted_type name and behavior
Change the name to get_validator to bette describe what it is doing.
Change the interface to always return a value. This lines up with the behavior of get_*
functions always returning something or None and check_* functions raising an
Exception if something went wrong during the check.
* Add param to check_type_str()
Not meant to be a long term fix, but gets tests passing. More work is needed to figure
out how to solve this cleanly.
* Remove private attribute mapping types to validator
Since the function that needs it has moved to parameters.py, there is no need to have it as
a attribute of AnsibleModule.
Update tests that were referencing the private attribute.
* Use private method for 'str' type
To avoid having to put the string conversion warning behavior in the check_type_str() method,
use the private _check_type_str() method for 'str' type.
Import CHECK_ARGUMENT_TYPES_DISPATCHER for backwards compalitibility and store it as
a private attribute.
Revert changes to support plugins that are referencing serf._CHECK_ARGUMENT_TYPES_DISPATCHER.
* Add changelog
* Change function name to better reflect its... function
* Change dict name to better reflect its contents
CHECK_ARGUMENT_TYPES_DISPATCHER --> DEFAULT_TYPE_VALIDATORS
* Fix changelog
* systemd - do not overwrite unit name when searching
PR #72702 introduced a bug that changed the unit name when splitting it up for the purpose
of searching for the unit. This only happens on unit file templates on systems that have a 5.8
or newer kernel and a version of systemd that does not contain a bugfix that causes systmed
to fail to parse dbus.
* Use facts rather than a manual probe to determine if systmed is present
* Remov unnecessary block
* Use vars files instead of set_fact
* Add tests for using a templated unit file
* Update changelog fragment
* Use template to get correct path to sleep binary
* import_playbook - change additional params to deprecation
I incorrectly recommended this be set as a warning when it should have been a deprecation.
* Fix deprecation sanity test to not required a collection name when not inside a collection
Also pin virtualenv to 16.7.10 for older Mac OS X systems. This was the version being installed
anway with the previous constraint (<20).
On systems with Python 3, now prefer venv over virtualenv. Test to see if venv is functional since
some systems have a non-functional venv installation (such as Debian).
* Update yum/dnf module docs to include version comp
Fixes#61234
Signed-off-by: Adam Miller <admiller@redhat.com>
* fix up docs syntax to sanity tests are happy
Signed-off-by: Adam Miller <admiller@redhat.com>
* ansible-galaxy collection list and verify now utilize collections in site-packages.
This is a short term fix for #70147. The long term fix needs to handle
install (but that discussion is also bound up in how upgrade is going to
work and where things can get installed so it's deferred for 2.11.)
* Add test for ansible-galaxy collection list with site-packages
* Fix sanity issue
Co-authored-by: David Moreau Simard <moi@dmsimard.com>
Co-authored-by: Jordan Borean <jborean93@gmail.com>
On python3 sys.stdin is an encoded file object that does not support
reading raw binary data. Use the supplied buffer object to do so.
Signed-off-by: Sven Wegener <sven.wegener@inovex.de>
Co-authored-by: Sven Wegener <sven.wegener@inovex.de>
This should allow users to extract specific files from an archive as
desired.
Fixes#16130, #27081.
* Rebase and make a few minor changes
* Add changelog
* Improve tests
- move to separate tasks file
- change assertions to check for exactly one file
- use remote_tmp_dir for output dir
* Make exclude and include mutually exclusive
* Don't remove files needed by other tasks
* Fix sanity tests
* Improve feature documentation
* Skip tests that use map() on CentOS 6
* Use fnmatch on include for zip archives
This matches the behavior of exclude
Co-authored-by: Sam Doran <sdoran@redhat.com>
* Remove space before comma in '... bla , use ...'
* 'why' is inserted in the middle of a sentence, between two commas.
* Make deprecations from base.yml show source ansible-core.
* Add changelog fragment.
* Improve some more 'why's.
* Add PR URL to fragment.
* file: add symlink is in a sticky directory tests
* file: handle symlink in a sticky directory
Co-Authored-By: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Add changelog and fix unit test
The builtins import was removed since it was unused, but it is now needed.
The recently released version of cffi fails to install on systems with an older version of gcc. In
our case, this in the CentOS 6 test image. There is a fix but it has not yet been released.
https://foss.heptapod.net/pypy/cffi/-/issues/480
* Move _syslog_facitily to __init__
No good reason it should not be set for each object
* Move internal property setting to private method
* Create check_arguments() function
* Remove unused import
* Rename function to better match its behavior
Change the behavior to return a set, either empty or populated, with unsupported keys.
Accept legal_inputs as optional which will not required calling handle_aliases before calling
get_unsupported_parameters().
* Add changelog
* Rework function behavior and documentation
I realized I missed the original intent of this method when moving it to a function. It
is meant to compared the parameter keys to legal inputs always, not compare
parameter keys to argument spec keys, even though the argument spec keys should
be a subset of legal inputs.
* Add tests
* Fix typo.
* Set internal properties when handling suboptions
We could not find reason for the docutils install so trying out removing it.
Also bumping to latest version of ansible-runner
Skip all python2 versions because next ansible-runner drops it
Co-authored-by: Elijah DeLee <kdelee@redhat.com>
Change:
- Initial set of changes for renaming to ansible-core
- Includes changelog fragment changes from base -> core
- Does NOT include docs changes
- Modifies detection stuff in setup.py to support ansible<2.9 and ansible-base
Test Plan:
- ci_complete
* Fix super annoying Python 2.6 multiprocessing.Queue stack trace in CI
A bug exists in Python 2.6 that sometimes raises an exception during interpreter shutdown. We
encounter this frequently in our CI since we run tests on CentOS 6 as the control node, which
has Python 2.6.6 with this bug.
This PR adds a very minor sleep only on Python 2.6 which gets around this issue. I did lot of testing
using a standalon script I found that easily duplicated the issue to find the minimum sleep value
needed to avoid this issue.
CPython issue: https://bugs.python.org/issue4106
Fix in CPython: https://hg.python.org/cpython/rev/d316315a8781
* Use correct attribute
* Consolidate logic for determining whether or not session is interactive
into a single function, is_interactive()
* Increase test coverage
I wasn't able to find a good way of simulating running a backgrounded test with CI since the
whole test is essentially run not in a TTY, which is similar enough to cause the new is_interactive()
function to always return false.
* add return documentation for unarchive, add fragment for changelog, apply suggestions from code review
Co-authored-by: Amin Vakil <info@aminvakil.com>
* Added caching mechanism for Galaxy API requests
* Add cache options and split up code
* Added unit tests
* Fix sanity test
* Use modified date and fix up caching for explicit servers
* Make sure credentials are not in cached server name
* Added test for getting updated cache version
* Changes from review
Change:
- Bump default, ansible-base, distro containers
- We do NOT add fedora33 yet, because it doesn't work right on Shippable
due to an old kernel. This will be added post-AZP.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* Reorder comment postition
* Add comment unit test
* Fix unit test
* Fix unit test
* Add changelog
* Add paramaters which would be problematic without this fix
* Fix typo
* Fix unit test
* Fix unit test
* Emit warning when running on the controller with a Python older than 3.8
* Add spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* and more spaces
Co-authored-by: Matt Clay <matt@mystile.com>
* s/Py/Python/
Co-authored-by: Matt Clay <matt@mystile.com>
* Add note to Control node requirements about Py3.8 requirement
* Add collection_name to deprecated call
* more spaces
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Clarify that we are only packaging for py3.8+
Co-authored-by: Matt Clay <matt@mystile.com>
Co-authored-by: Sviatoslav Sydorenko <wk.cvs.github@sydorenko.org.ua>
* Fix 'role_name : tast_name' notation if task contains role name
* Add tests for notifying handler names which contain the role name
Co-authored-by: Thomas Wouters <thomaswouters@gmail.com>
* Support docker and k8s action groups for moved modules in community.docker and community.kubevirt.
* Also support k8s action group for community.okd.
* Also add kubernetes.core.
* Adjust PR #.
* Fix changelog fragment.
* Remove community.okd.
* Revert "Remove community.okd."
This reverts commit 812b5aa6e2.
* ansible-doc: export has_action when --json is used.
* Remove docuri and now_data, which were not used resp. ignored in format_plugin_doc and the functions it calls anyway.
* Add function _combine_plugin_doc.
* added timeout options to adhoc and console
* added test
* fix typosesz
* fix conflict
* task_timeout
* fix timeout option, added extra vars to console
* actually use right cli switch .. DUH!
* added timeout to include 'valid' but ignored keys
* fix default
* fixes per review
* Add DarwinStrategy class and integration tests
macOS has three seprate hostname params that need to be set. One of those params, LocalHostName, has more stringent requirements than the other two, which accept special characters and spaces. Create a method to scrub the hostname to ensure it works well with the system requirements.
* Update documentation
* Account for virtualization type returned on Azure Pipelines
* Do not be dependent on order of self.name_types
Use the scrubbed name when the name type is LocalHostName
A bug existed in systemd 245 that did not properly handle unknown kernel
capabilities gracefully. This resulted in incomplete output when querying
for the service status. It is possible to get service status by other means.
This PR works around this issue by getting service status using other commands
in the event of a failure due to this bug.
Change:
- Cryptography 3.2 drops support for OpenSSL 1.0.2. Some of our CI
infrastructure still uses this version (FreeBSD, namely). For now,
just add a constraint to use old cryptography.
Test Plan:
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* GitHub is removing the underlying API used to implement the `login` command. Since the general consensus seems to be that relatively nobody currently uses this command (in favor of explicit token passing), support was simply removed for interactive login. If a future need arises, this command should be reimplemented via OAuth Device Auth Grants.
* login or role login commands now produce a fatal error with a descriptive message
* updated 2.10 and 2.11 porting guide entries
* remove dead code/config, update messages and porting guides
* Fix ansible-test docker container detection.
* Attach test containers to the correct network.
* Do not assume `localhost` for accesing Docker.
* Look for containers on current network.
* Always map /var/run/docker.sock into containers.
This fixes issues when using a remote Docker host.
* Support container IP lookup from networks list.
* Fix container network attachment.
* Remove redundant container detection messages.
* Limit DOCKER_HOST parsing to TCP.
* Restore docker socket existence check.
The check is skipped if the docker hostname is not localhost.
* Correct changelog entry.
* Fix the reversed order of return values
AnsibleModule.run_command returns a tuple of return code, stdout and stderr.
The module main function of the user module expects user.create_user to
return a tuple of return code, stdout and stderr.
Fix the locations where stdout and stderr got reversed.
* Fix another missed occurance
* Add changelog
* Fix further reversed order of return values occurrences
Followup to 72c3ba62c8:
Fix further reversed order of return values occurrences.
Change:
- containerd is now recognized as container tech
Test Plan:
- Tested with Docker inside Github Actions in a private repo:
"ansible_virtualization_role": "guest",
"ansible_virtualization_tech_guest": [
"containerd",
"container",
"VirtualPC"
],
"ansible_virtualization_tech_host": [],
"ansible_virtualization_type": "containerd",
Tickets:
- Fixes#66304 because this is what docker containers show up as
in Github Actions.
Signed-off-by: Rick Elrod <rick@elrod.me>
* Ensure we call action_loader.get with collection_list. Fixes#72170
* Add tests and changelog
* Remove grep, do assertion in playbook. ci_complete
* Skip old jinja2 versions
* ci_complete
* dedupe
make collections whitelist follow normal flow
* fixes missing set_options call and adhoc and stdout processing rules
* avoid dupes
* fixed to handle redirects
* also updated tests with new and more accurate skip message
* fix callback tests for envs with cowsay installed
* lots MOAR comments on why the code is as it is, some todos to refactor in future
Co-authored-by: Matt Davis <nitzmahone@users.noreply.github.com>
Change:
- When a plugin defines `type: str` on a parameter, treat more kinds of
input as a string instead of whatever it is parsed as.
Test Plan:
- New unit tests
- CI
Signed-off-by: Rick Elrod <rick@elrod.me>
* Add support for GSSAPI/Kerberos to urls.py
* Test out changes with the latest test container
* Get remote hosts working
* Fix up httptester_krb5_password reader
* Fix tests for opensuse and macOS
* Hopefully last lot of testing changes
* Dont do CBT on macOS
* Fixes from review
Change:
- No longer fail due to old Fedora/RHEL and our failure to try to cast
gids to integers before trying to pass them to getgrgid() before
trying to use them.
- Add tests for user/mode for various unarchive formats.
Test Plan:
- New integration tests, ran against centos6 container
Tickets:
- Fixes#71903
Change:
- Make KubeVirt be identified as such, and with a guest role.
- This is a breaking change, since playbooks could be relying on the
incorrect behavior previously.
Test Plan:
- Issue author
Tickets:
- Fixes#72001
Signed-off-by: Rick Elrod <rick@elrod.me>
