* Fix bug where we were actually checking for the availability of the
requested package name and not 'sqlports' even if that was the goal.
* Add check that the sqlports database file exists before using it.
* Sprinkle some debug messages for an easier time following the code when
developing.
* Such package names requires at least OpenBSD 6.0.
* Rework get_package_state() to use 'pkg_info -Iq inst:' instead of 'pkg_info -e'
because it understands the branch syntax. It also means we can get rid of
some additional special handling.
This was suggested by Marc Espie:
http://marc.info/?l=openbsd-tech&m=146659756711614&w=2
* Drop get_current_name() because the use of 'pkg_info -Iq inst:' in
get_package_state() means we already have that information available without
needing to do custom parsing. This was also necessary because a name such as
"postfix%stable" does not in itself contain the version information necessary
for the custom parsing. pkg_info -Iq translates such a name to the actual
package name seamlessly.
* Add support for finding more than one package for the supplied package name
which may happen if we only supply a stem.
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
The external_ids 'type' was not defined in the argument spec of
openvswitch_bridge. This caused 'external_ids' to be converted to a
string leading to an error when later calling exp_external_ids.items().
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
No functional code changes were made.
* influxdb: retention_policy: infinite retention is returned as 0 from influxdb
* influxdb: retention_policy: database_name argument should be required
A number of coding conventions have been adopted for new F5 modules
that are in development. To ensure common usage across the modules,
this module needed to be updated to reflect those conventions.
Prior to 2.1, imports of module_utils was actually a preprocessor-like
substitution. So importing at the bottom helped preserve line numbers when
debugging. We'll be moving these to the top of files as time goes on.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
Ceph Object Gateway (Ceph RGW) is an object storage interface built on top of
librados to provide applications with a RESTful gateway to Ceph Storage
Clusters:
http://docs.ceph.com/docs/master/radosgw/
This patch adds the required bits to handle buckets with the RGW S3 RESTful API
properly.
It sticks to the AWS behaviour where possible while avoiding not yet
implemented features in the Ceph RGW API.
Signed-off-by: Javier M. Mellid <jmunhoz@igalia.com>
I am taking over much of the development of modules old
and new for F5 and to meet the coding conventions for our
modules, I am aiming at newer python versions.
Therefore, I will be excluding python 2.4
This patch adds support for the server_port module. It
additionally updates the documentation in the module for
it.
The changes were tested in the f5-ansible repository to
ensure no breaking changes were made. This argument allows
modules to be used on BIG-IPs that are listening on
non-standard ports.
PR #1299 introduced the service_address parameter but specified a
default value of localhost. This is a breaking change; prior to that,
the consul module would always assume that the service should advertise
the address that the Consul agent was listening on. With this change,
the consul module will now default to advertising localhost to all nodes
for the service, which isn't the desired behavior. This changes the
default back to None which is the implicit default prior to #1299.
* Implement mounts in proxmox module
mounts in proxmox are the additionnal disk devices set in a guests.
We handle the mounts the same way that netif devices, using a
dictionnary with keys being mp0, mp1,…
* Add version_added
Seems to be a requirement but I didn't see that anywhere.
Hope it'll fix the travis-ci issue
* add a new modify command
for now, allows adding or modifying hosts in the dhcp subsystem
* fix some pep8 things that escaped
* add modify in the list in the doc
* added mention of adding modify in version 2.1
* handle the test mode case for modify
* modify the code for finer check mode support
added profile examples as my firewall task would pass yet no firewall rule was created until I added
profile: Domain,Private,Public
When setting a Firewall rule on Windows Server 2008 R2 manually, these three are selected as default, useful to have in the documentation maybe?
New SELinux module sefcontext to set SELinux file context mappings
This module implements `semanage fcontext` in an idempotent way.
It supports check-mode and diff-mode.
Without these fixes using the modules would result in the following error:
implementation error: unknown type <type 'bool'> requested for validate_certs
The external_ids 'type' was not defined in the argument spec of
openvswitch_port. This lead 'external_ids' to be converted to a
string, when the value was not defined. Further down the code this
was leading to an exception in some cases. By defining the type
all is right.
This commit fixes incorrect type of the "params" option of the
"yum_repository" module. Without this fix the value of the "params"
option is read as a string instead of as a dictionary which makes
it impossible to define any additional YUM repository parameters.
According to module checklist:
- Descriptions should always start with a Capital letter and end with a
full stop.
- Ensure that you make use of U() for urls, C() for files and options,
I() for params, M() for modules.
* Streamlined ec2_elb_facts module return values with naming in ec2_elb_lb (hosted zones)
* Keep the old return values for hosted zone to keep backwards compatibility
fix syntax problems:
* it is possible that sql injection is done, therefore the [DBNAME] syntax is used.
* it is not possible to use default escape on cursor.execute for DBNAME, since it will insert single quotes around the name and this will cause syntax problems / single quotes within the actual DBNAME
implement autocommit setting, since some content can not be imported within transaction
fix for automatic tests
fix problems with named instances, corrected error message regarding configuration file
remove unused placeholder
Using pymssql string interpolation
Cursor does string interpolation at script execution
Handled edge cases in import and delete
updated ansible version number
The arg spec for update_catalog include 'type=bool'
and 'choices=["yes", "no"] which can never both be
true.
Remove the 'choices' directive, and update doc string.
Fixes#2144
- Avoiding the use of 'with ... as ...' and 'except ... as ...' constructs.
- Make use of posixpath.join() rather than concatenating slashes ourselves
(To avoid having consecutive slashes which broke something on our side)
* New AWS module for managing VPC Networks ACLs
Moved return outside of try block
botocore.exceptions to support python 2.5
For some reason Travis is using Python V2.4 to run the tests - My code is valid
duplicate file
* Fixed NameError Exception- module not being passed when calling some boto3 client methods
* Fixes a bug reported by @dennisconrad, where the nacl is not created when subnets list is empty
* nacl property changed to name and fixes a bug where nacl is not deleted when subnets list is empty
* Updates to version and requirements
* Fix 'vpc' param to 'vpc_id' to match documentation and convention
* known_hosts: clarify key format in documentation
Add a small clarification to the documentation about the format of the
"key" parameter.
Should make #664 less of a issue for newcomers.
* known_hosts: normalize key entry to simplify input
Keys are normalized before comparing input with present keys. This
should make it easier to deal with some corner cases, such as having a
hashed entry for some host and trying to add it as non-hashed.
* known_hosts: allow multiple entries per host
In order to support multiple key types and allow the installed ssh
version to decide which is more secure, the module now only overwrites
an existing entry in known_hosts if the provided key is of the same
type.
Old keys of different types must be explicitly removed. Setting
state to "absent" and providing no key will remove all entries for the
host.
* Fix problem with 'restarted' state not restarting the apppool when it is in running state
* Implemeting code review comments
Comment from previous commit “You basically want to start the pool if
it's stopped and requested state is started or restarted, otherwise if
requested state is restarted, restart it.” This commit implements the
behavior stated in the PR comment
* Added more robust error handling
* Add Win Synchronize module
Renamed win_synchronize to win_robocopy
Updating email address
Adding "flags" argument.
Adding a "flags" argument that will allow the user to pass args
directly to robocopy.
If "flags" is set, recurse and purge will be ignored.
Add return code to output
Added bits to support check mode
Fixing typo in Documentation
Updated Documentation to have "RETURNED" field
Updated win_robocopy.py to have the RETURNED field. I also noticed
that win_robocopy.ps1 wasn't really using the "changed" attribute,
so I went in and made sure it was being set appropriately.
Forcing bool type for recurse and purge flag
Updated "version_added"
Since they both depend on library that cannot run on python2.4,
cf https://github.com/ansible/ansible/pull/15870, we can use
directly the python 2.6 syntax, as seen on the porting doc.
Due to ansible/jinja2 templating, it is difficult to use the monitor message template variables as they need to be surrounded by `{{` and `}}`, this change addresses that issue by allowing the user to use `[[` and `]]` instead.
The lvol module has a different logic in check-mode for knowing when a change is induced. And this logic is *only* based on a size check. However during a normal run, it is the lvreduce or lvextend tool that decides when a change is performed (or when the requested and existing sizes differ). So while in check-mode the module reports a change, in real run-mode it does not in fact changes anything an reports ok.
One solution would be to implement the exact size-comparison logic that is implemented in lvextend and lvreduce, but we opted to use the `--test` option to each command to verify if a change is induced or not. In effect both check-mode and run-mode use the exact same logic and conclusion.
Instead of doing an unpack, deliberately specify which parameters you
want to use. This allows us to flexibly add more parameters to the
f5_argument_spec without having to rewrite all the modules that use
it.
Functionally this commit changes nothing, it just provides for a
different way of accessing the parameters to the module
* refactor zypper module
Cleanup:
* remove mention of old_zypper (no longer supported)
* requirement goes up to zypper 1.0, SLES 11.0, openSUSE 11.1
* allows to use newer features (xml output)
* already done for zypper_repository
* use zypper instead of rpm to get old version information, based on work by @jasonmader
* don't use rpm, zypper can do everything itself
* run zypper only twice, first to determine current state, then to apply changes
New features:
* determine change by parsing zypper xmlout
* determine failure by checking return code
* allow simulataneous installation/removal of packages (using '-' and '+' prefix)
* allows to swap out alternatives without removing packages depending
on them
* implement checkmode, using zypper --dry-run
* implement diffmode
* implement 'name=* state=latest' and 'name=* state=latest type=patch'
* add force parameter, handed to zypper to allow downgrade or change of vendor/architecture
Fixes/Replaces:
* fixes#1627, give changed=False on installed patches
* fixes#2094, handling URLs for packages
* fixes#1461, fixes#546, allow state=latest name='*'
* fixes#299, changed=False on second install, actually this was fixed earlier, but it is explicitly tested now
* fixes#1824, add type=application
* fixes#1256, install rpm from path, this is done by passing URLs and paths directly to zypper
* fix typo in package_update_all
* minor fixes
* remove commented code block
* bump version added to 2.2
* deal with zypper return codes 103 and 106
* Add git_config module
This module can be used for reading and writing git configuration at all
three scopes (local, global and system). It supports --diff and --check
out of the box.
This module is based off of the following gist:
https://gist.github.com/mgedmin/b38c74e2d25cb4f47908
I tidied it up and added support for the following:
- Reading values on top of writing them
- Reading and writing values at any scope
The original author is credited in the documentation for the module.
* Respond to review feedback
- Improve documentation by adding choices for parameters, requirements
for module, and add missing description for scope parameter.
- Fail gracefully when git is not installed (followed example of puppet
module).
- Remove trailing whitespace.
* Change repo parameter to type 'path'
This ensures that all paths are automatically expanded appropriately.
* Set locale to C before running commands to ensure consistent error messages
This is important to ensure error message parsing occurs correctly.
* Adjust comment
As is done in other ansible modules, this adds the __main__ check
to the module so that the module code itself can be used as a library.
For instance, when testing the code.
It's not particularly obvious that removing an application will remove it
from ufw's own state, potentially leaving ports open on your box if you
upload your configuration.
Whilst this applies to a lot of things in Ansible, firewall rules might
cross some sort of line that justifies such a warning in his instance.
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
1) Removed kubectl functionality. We'll move that into a different
module in the future. Also removed post/put/patch/delete options,
as they are not Ansible best practice.
2) Expanded error handling in areas where tracebacks were most likely,
based on bad data from users, etc.
3) Added an 'insecure' option and made the password param optional, to
enable the use of the local insecure port.
4) Allowed the data (both inline and from the file) to support multiple
items via a list. This is common in YAML files where mutliple docs
are used to create/remove multiple resources in one shot.
5) General bug fixing.
* Remove support for ancient zypper versions
Even SLES11 has zypper 1.x.
* zypper_repository: don't silently ignore repo changes
So far when a repo URL changes this got silently ignored (leading to
incorrect package installations) due to this code:
elif 'already exists. Please use another alias' in stderr:
changed = False
Removing this reveals that we correctly detect that a repo definition
has changes (via repo_subset) but don't indicate this as change but as a
nonexistent repo. This makes us currenlty bail out silently in the above
statement.
To fix this distinguish between non existent and modified repos and
remove the repo first in case of modifications (since there is no force
option in zypper to overwrite it and 'zypper mr' uses different
arguments).
To do this we have to identify a repo by name, alias or url.
* Don't fail on empty values
This unbreaks deleting repositories
* refactor zypper_repository module
* add properties enabled and priority
* allow changing of one property and correctly report changed
* allow overwrite of multiple repositories by alias and URL
* cleanup of unused code and more structuring
* respect enabled option
* make zypper_repository conform to python2.4
* allow repo deletion only by alias
* check for non-existant url field and use alias instead
* remove empty notes and aliases
* add version_added for priority and overwrite_multiple
* add version requirement on zypper and distribution
* zypper 1.0 is enough and exists
* make suse versions note, not requirement
based on comment by @alxgu
* add vmware maintenance mode support
* changed version number in documentation
* updated version_added to 2.0 since CI is failing
* changed version to 2.0 due to CI - error asking for 2.1
* added RETURN
* updated formatting of return values and added some to clarify actions taken
* Support for masquerade settings
Ability to enable and disable masquerade settings from ansible via:
- firewalld: mapping=masquerade state=disabled permanent=true zone=dmz
Placeholder added (mapping) to support masquerade and port_forward
choices initially - port_forward not implemented yet.
* Permanent and Immediate zone handling differentiated
* Corrected naming abstraction for masquerading functionality
Removed mapping tag with port_forward choices - not applicable!
* Added version info for new masquerade option
Pull Request #2017 failing due to missing version info
* Add SQS queue policy attachment functionality
SQS queue has no attribute 'Policy' until one is attached, so this special
case must be handled uniquely
SQS queue Policy can now be passed in as json
container_config:
- "lxc.network.ipv4.gateway=auto"
- "lxc.network.ipv4=192.0.2.1"
might try to override lxc.network.ipv4.gateway in the second entry as both
start with "lxc.network.ipv4".
use a regular expression to find a line that contains (optional) whitespace
and an = after the key.
Signed-off-by: Evgeni Golov <evgeni@golov.de>
before the following would produce four entries:
container_config:
- "lxc.network.flags=up"
- "lxc.network.flags =up"
- "lxc.network.flags= up"
- "lxc.network.flags = up"
let's strip the whitespace and insert only one "lxc.network.flags = up"
into the final config
Signed-off-by: Evgeni Golov <evgeni@golov.de>
The previous version of my regexp did not take into account packages
such as 'p5-Perl-Tidy' or 'p5-Test-Output', so use a greedy match up to
the last occurrance of '-' for matching the package. This regex has
been extensively tested using all packages as provided by pkgsrc-2016Q1[1].
Footnotes:
[1] http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/?only_with_tag=pkgsrc-2016Q1
Since user_key and app_token are used for authentication, I
suspect both of them should be kept secret.
According to the API manual, https://pushover.net/api
priority go from -2 to 2, so the argument should be constrained.
- make path to pkgin a global and stop passing it around; it's not going
to change while ansible is running
- add support for several new options:
* upgrade
* full_upgrade
* force
* clean
- allow for update_cache to be run in the same task as upgrading/installing
packages instead of needing a separate task for that
Only a small issue in results.
In case of type is ingress, we rely on ip address, but in results we also return the network.
Resolving the ip address works without zone params. If the ip address is not located in the default zone and zone param is not set,
the network won't be found because default zone was used for the network query listing.
However since network param is not used for type ingress we skip the return of the network in results.
At the moment, this only works when 'enable' is equals to 'yes' or 'no'.
While I'm on it, I also fixed a typo in the example and added a required
parameter.
* VMware datacenter module rewritten to don't hold pyvmomi context and objects in Ansible module object
fixed exceptions handling
added datacenter destroy result, moved checks
changed wrong value
wrong value again... need some sleep
* check_mode fixes
* state defaults to present, default changed to true
* module check fixes
