Since they both depend on library that cannot run on python2.4,
cf https://github.com/ansible/ansible/pull/15870, we can use
directly the python 2.6 syntax, as seen on the porting doc.
Due to ansible/jinja2 templating, it is difficult to use the monitor message template variables as they need to be surrounded by `{{` and `}}`, this change addresses that issue by allowing the user to use `[[` and `]]` instead.
The lvol module has a different logic in check-mode for knowing when a change is induced. And this logic is *only* based on a size check. However during a normal run, it is the lvreduce or lvextend tool that decides when a change is performed (or when the requested and existing sizes differ). So while in check-mode the module reports a change, in real run-mode it does not in fact changes anything an reports ok.
One solution would be to implement the exact size-comparison logic that is implemented in lvextend and lvreduce, but we opted to use the `--test` option to each command to verify if a change is induced or not. In effect both check-mode and run-mode use the exact same logic and conclusion.
Instead of doing an unpack, deliberately specify which parameters you
want to use. This allows us to flexibly add more parameters to the
f5_argument_spec without having to rewrite all the modules that use
it.
Functionally this commit changes nothing, it just provides for a
different way of accessing the parameters to the module
* refactor zypper module
Cleanup:
* remove mention of old_zypper (no longer supported)
* requirement goes up to zypper 1.0, SLES 11.0, openSUSE 11.1
* allows to use newer features (xml output)
* already done for zypper_repository
* use zypper instead of rpm to get old version information, based on work by @jasonmader
* don't use rpm, zypper can do everything itself
* run zypper only twice, first to determine current state, then to apply changes
New features:
* determine change by parsing zypper xmlout
* determine failure by checking return code
* allow simulataneous installation/removal of packages (using '-' and '+' prefix)
* allows to swap out alternatives without removing packages depending
on them
* implement checkmode, using zypper --dry-run
* implement diffmode
* implement 'name=* state=latest' and 'name=* state=latest type=patch'
* add force parameter, handed to zypper to allow downgrade or change of vendor/architecture
Fixes/Replaces:
* fixes#1627, give changed=False on installed patches
* fixes#2094, handling URLs for packages
* fixes#1461, fixes#546, allow state=latest name='*'
* fixes#299, changed=False on second install, actually this was fixed earlier, but it is explicitly tested now
* fixes#1824, add type=application
* fixes#1256, install rpm from path, this is done by passing URLs and paths directly to zypper
* fix typo in package_update_all
* minor fixes
* remove commented code block
* bump version added to 2.2
* deal with zypper return codes 103 and 106
* Add git_config module
This module can be used for reading and writing git configuration at all
three scopes (local, global and system). It supports --diff and --check
out of the box.
This module is based off of the following gist:
https://gist.github.com/mgedmin/b38c74e2d25cb4f47908
I tidied it up and added support for the following:
- Reading values on top of writing them
- Reading and writing values at any scope
The original author is credited in the documentation for the module.
* Respond to review feedback
- Improve documentation by adding choices for parameters, requirements
for module, and add missing description for scope parameter.
- Fail gracefully when git is not installed (followed example of puppet
module).
- Remove trailing whitespace.
* Change repo parameter to type 'path'
This ensures that all paths are automatically expanded appropriately.
* Set locale to C before running commands to ensure consistent error messages
This is important to ensure error message parsing occurs correctly.
* Adjust comment
As is done in other ansible modules, this adds the __main__ check
to the module so that the module code itself can be used as a library.
For instance, when testing the code.
It's not particularly obvious that removing an application will remove it
from ufw's own state, potentially leaving ports open on your box if you
upload your configuration.
Whilst this applies to a lot of things in Ansible, firewall rules might
cross some sort of line that justifies such a warning in his instance.
Signed-off-by: Chris Lamb <chris@chris-lamb.co.uk>
1) Removed kubectl functionality. We'll move that into a different
module in the future. Also removed post/put/patch/delete options,
as they are not Ansible best practice.
2) Expanded error handling in areas where tracebacks were most likely,
based on bad data from users, etc.
3) Added an 'insecure' option and made the password param optional, to
enable the use of the local insecure port.
4) Allowed the data (both inline and from the file) to support multiple
items via a list. This is common in YAML files where mutliple docs
are used to create/remove multiple resources in one shot.
5) General bug fixing.
* Remove support for ancient zypper versions
Even SLES11 has zypper 1.x.
* zypper_repository: don't silently ignore repo changes
So far when a repo URL changes this got silently ignored (leading to
incorrect package installations) due to this code:
elif 'already exists. Please use another alias' in stderr:
changed = False
Removing this reveals that we correctly detect that a repo definition
has changes (via repo_subset) but don't indicate this as change but as a
nonexistent repo. This makes us currenlty bail out silently in the above
statement.
To fix this distinguish between non existent and modified repos and
remove the repo first in case of modifications (since there is no force
option in zypper to overwrite it and 'zypper mr' uses different
arguments).
To do this we have to identify a repo by name, alias or url.
* Don't fail on empty values
This unbreaks deleting repositories
* refactor zypper_repository module
* add properties enabled and priority
* allow changing of one property and correctly report changed
* allow overwrite of multiple repositories by alias and URL
* cleanup of unused code and more structuring
* respect enabled option
* make zypper_repository conform to python2.4
* allow repo deletion only by alias
* check for non-existant url field and use alias instead
* remove empty notes and aliases
* add version_added for priority and overwrite_multiple
* add version requirement on zypper and distribution
* zypper 1.0 is enough and exists
* make suse versions note, not requirement
based on comment by @alxgu
* add vmware maintenance mode support
* changed version number in documentation
* updated version_added to 2.0 since CI is failing
* changed version to 2.0 due to CI - error asking for 2.1
* added RETURN
* updated formatting of return values and added some to clarify actions taken
* Support for masquerade settings
Ability to enable and disable masquerade settings from ansible via:
- firewalld: mapping=masquerade state=disabled permanent=true zone=dmz
Placeholder added (mapping) to support masquerade and port_forward
choices initially - port_forward not implemented yet.
* Permanent and Immediate zone handling differentiated
* Corrected naming abstraction for masquerading functionality
Removed mapping tag with port_forward choices - not applicable!
* Added version info for new masquerade option
Pull Request #2017 failing due to missing version info
* Add SQS queue policy attachment functionality
SQS queue has no attribute 'Policy' until one is attached, so this special
case must be handled uniquely
SQS queue Policy can now be passed in as json
container_config:
- "lxc.network.ipv4.gateway=auto"
- "lxc.network.ipv4=192.0.2.1"
might try to override lxc.network.ipv4.gateway in the second entry as both
start with "lxc.network.ipv4".
use a regular expression to find a line that contains (optional) whitespace
and an = after the key.
Signed-off-by: Evgeni Golov <evgeni@golov.de>
before the following would produce four entries:
container_config:
- "lxc.network.flags=up"
- "lxc.network.flags =up"
- "lxc.network.flags= up"
- "lxc.network.flags = up"
let's strip the whitespace and insert only one "lxc.network.flags = up"
into the final config
Signed-off-by: Evgeni Golov <evgeni@golov.de>
The previous version of my regexp did not take into account packages
such as 'p5-Perl-Tidy' or 'p5-Test-Output', so use a greedy match up to
the last occurrance of '-' for matching the package. This regex has
been extensively tested using all packages as provided by pkgsrc-2016Q1[1].
Footnotes:
[1] http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/?only_with_tag=pkgsrc-2016Q1
Since user_key and app_token are used for authentication, I
suspect both of them should be kept secret.
According to the API manual, https://pushover.net/api
priority go from -2 to 2, so the argument should be constrained.
- make path to pkgin a global and stop passing it around; it's not going
to change while ansible is running
- add support for several new options:
* upgrade
* full_upgrade
* force
* clean
- allow for update_cache to be run in the same task as upgrading/installing
packages instead of needing a separate task for that
Only a small issue in results.
In case of type is ingress, we rely on ip address, but in results we also return the network.
Resolving the ip address works without zone params. If the ip address is not located in the default zone and zone param is not set,
the network won't be found because default zone was used for the network query listing.
However since network param is not used for type ingress we skip the return of the network in results.
At the moment, this only works when 'enable' is equals to 'yes' or 'no'.
While I'm on it, I also fixed a typo in the example and added a required
parameter.
* VMware datacenter module rewritten to don't hold pyvmomi context and objects in Ansible module object
fixed exceptions handling
added datacenter destroy result, moved checks
changed wrong value
wrong value again... need some sleep
* check_mode fixes
* state defaults to present, default changed to true
* module check fixes
Note that since cpanm version 1.6926 its messages are sent to stdout
when previously they were sent to stderr.
Also there is no need to initialize out_cpanm and err_cpanm and
check for their truthiness as module.run_command() and str.find()
take care of that.
* added stdout and stderr outputs
Added stdout and stderr outputs of the results from composer as the current msg output strips \n so very hard to read when debugging
* using stdout for fail_json
using stdout for fail_json so we get the stdout_lines array
with the default umask tar will create a world-readable archive of the
container, which may contain sensitive data
Signed-off-by: Evgeni Golov <evgeni@golov.de>
* do not use a predictable filename for the LXC attach script
* don't use predictable filenames for LXC attach script logging
* don't set a predictable archive_path
this should prevent symlink attacks which could result in
* data corruption
* data leakage
* privilege escalation
otherwise deploying user-containers fail as these require information
from ~/.config/lxc/default.conf that the LXC tools will load if no
--config was supplied
Signed-off-by: Evgeni Golov <evgeni@golov.de>
This change adds a note to the win_scheduled_task module
docs that indicates Windows Server 2012 or later is required.
This is because the module relies on the Get-ScheduledTask
cmdlet, which is a part of the Server 2012 OS. Previous
versions, like Server 2008, simply can't work with this
module.
The range_search() API was added to the shade library in version
1.5.0 so let's check for that and let the user know they need to
upgrade if they try to use it.
Addition of an os_ironic_inspect module to leverage the OpenStack
Baremetal inspector add-on to ironic or ironic driver out-of-band
hardware introspection, if supported and configured.
The manual check to see if get_bin_path() returned anything is
redundant, because we pass True to the required parameter of
get_bin_path(). This automatically causes the task to fail if the pacman
binary isn't available. Therefore, the code within the if statement
being removed is never called.
-e or --execute [1] allows to execute a specific piece of Puppet code
such a class.
For example, in puppet you would run:
puppet apply -e 'include ::mymodule'
Will be in ansible:
puppet: execute='include ::mymodule'
[1] http://docs.puppetlabs.com/puppet/latest/reference/man/apply.html#OPTIONS
win_unzip fails to extract files when either src or dest contains
complex paths such as "..\..\" or "C:\\Program Files" (double slashes).
Fix this by fetching absolute path of both before invoking CopyHere
method.
Set int for the various port (and so avoid to convert them later)
Set no_log=True for the login_password
Verify that db is a int, so avoid a conversion
Do a sorted comparison of the list of security groups supplied via `module.params.get('security_groups')` and the list of security groups fetched via `get_sec_group_list(eni.groups)`. This fixes an incorrect "The specified address is already in use" error if the order of security groups in those lists differ.
I changed the logic here to always use 'netsh ... show rule' keywords as keys for $fwsettings map. While the translation (e.g. Enabled -> enable) is performed when invoking 'netsh ... add rule' command.
I tested rule creation and rule creation when the rule was already existing on Windows Server 2012.
Currently the module doesn't explicitly close the file handle. This
wraps the reading of the private key in a try/finally block to ensure
the file is properly closed.
When passing a package version that parses as a number (e.g. `1.9`), the version should be converted to a string before being concatenated to the package name.
add exit_json code to succesfully exit, when you want to delete the already
deleted host.
Without this, playbook fails with
`Specify at least one group for creating host`
which is not correct message.
New module to retrieve facts about existing instance flavors.
By default, facts on all available flavors will be returned.
This can be narrowed by naming a flavor or specifying criteria
about flavor RAM or VCPUs.
- original parameter comment was probably copy&paste error
- new comment highlights that firewall rules can be
added or removed altering this parameter
Session_id is unused in update_session, changed is always specifically
set in all exit_json call, and consul_client.session.destroy return True
or False, and is unused later (nor checked)
TRACE:
while parsing a block mapping
in "<string>", line 33, column 13:
description: resulting state of ...
^
expected <block end>, but found ','
in "lxc_container.RETURN", line 419, column 53:
... "/tmp/test-container-config.tar",
ERROR: RETURN is not valid YAML. Line 419 column 53
- "action" style invoking is a legacy way to call modules
- the examples were updated to the typical style of calling complex
modules:
ovirt:
parameter1: value1
parameter2: value2
...
The os_project module instantiates the openstack cloud object
by passing the module params kwargs.
As the params contain a key named 'domain_id', this is used
for domain in the OpenStack connection, instead of the domain value
the user specifies on the OSCC clouds.yaml or OpenStack envvars.
This fix corrects this by popping the 'domain_id' key, so it we
keep the value but it's not passed later on module.params.
