- Add VSTS CI for Windows
- Disable `Access-denied test for Get-Item C:\windows\appcompat\Programs\Install -ErrorAction Stop`, because the path does not always exist
- https://github.com/PowerShell/PowerShell/issues/7553
- Disable `Should give .sys file if the fullpath is specified with hidden and force parameter`, because pagefile.sys doesn't always exist and other files don't meet test's requirement.
- https://github.com/PowerShell/PowerShell/issues/7554
- Disable some `Test-Connection` tests for same reasons they failed on VSTS Linux
- https://github.com/PowerShell/PowerShell/issues/7555
- Disable `Test-FileCatalog should pass when catalog is in the same folder as files being tested`, because the CmdLet does not work in that scenario
- Also, give details needed to investigate when the test fails
- https://github.com/PowerShell/PowerShell/issues/7556
- Update `appveyor.psm1` to work with VSTS
- Update `HelpersRemoting.psm1` `New-RemoteSession` to work for CimSession (discovered an issue during the investigation)
- Update `Test wildcard with drive relative directory path` to work when there are multiple drives
- Disable on non-windows machines since the test is assuming drive letters
- Update `New-CimSession` Tests to requireAdmin
- Also, make sure session name is a string
- Add functions to save and restore psoptions
- update `.gitatttributes` so files clone like they do on appveyor
Update Start-PSPester and Start-PSxUnit to upload test results when running in VSTS
Disable tests which require non-root using when running as root
remove verifications in Test-Connection tests which verify buggy behavior
Skip tests which don't behave correctly in VSTS (due to running in a container?)
- Test-Connection - #7528
- Set-Date - #7529
Remove code from build.psm1 that save the modules to a versioned folder. For servicing reasons after release it is preferred and easier to not have the versioned folder so that we can directly replace modules that need to be serviced (MSI specifically makes it difficult to service a module if the folder path changes).
Default to DefaultConsoleWidth when DotNet says WindowWidth is 0
This resolves an issue in an environment like VSTS when pwsh is spawned and DotNet is not able to determine the Console Width.
* Port changes from #6883 by @kalgiz
Make sure that SettingFile arg is parsed before we load the settings
- Add ability to parse some setting before console host is created
- Trigger the Parse before the console host is created
- disable snapin loading from loading setting before this point
- re-enable mac logging tests.
Also, fix the following Travis-ci issues:
- make sure the Linux and macOS caches are separate to reduce the size
- update the macOS image to the closest image as used by the official build system (equivalent to VSTS hosted mac builds)
Fix#7089. Native globbing on UNIX was turning absolute paths into relative paths when it shouldn't. The code suppresses generating a relative path for paths starting with '~'. It also need to do the same for paths starting with '/'.
Unescape non-literal, non-glob path in ProccessRecord and
set the context.SuppressWildcardExpansion in RenameItem.
This solve the issue where Rename-Item complains -Path does not exist
when both -Path and CWD contains special characters.
- Formatting file should be used for `MarkdownOptionInfo` object instead of the types file for adding script property.
- Downlevel windows consoles which do not support VT100 escape sequences should be handled gracefully.
- Add helpuri fwlink for cmdlets.
- Make `-Path` a positional parameter for `ConvertFrom-Markdown`
- make `-InputObject` a positional parameter for `Set-MarkdownOption`
- Make switch-statement report correct error position when it fails to evaluate the condition.
- Make for-statement report correct error position when it fails to evaluate the initializer.
- For the condition of `if/for/while/do-while/do-until` statements, the sequence point update is either duplicate in some cases (for `if/for/while`) which causes debugger to stop at the condition twice before moving forward, or missing (for `do-while/do-until`) which causes debugger to skip the condition. They are fixed.
Some values are not converted from json to PSCustomObject, because Newtonsoft.Json reads them and thinks they are metadata properties only useful for deserialization. This change makes Newtonsoft.Json "ignore" those properties so they are converted correctly from json to PSCustomObject.
The intent was to have the version of the PSSessionConfiguration name not include the `v` for the version string. Also, Preview releases should standardize on `PowerShell.6-Preview` instead of clobbering `PowerShell.6` so that stable and preview can co-exist side-by-side.
Need to verify on Win10 IoT if `Install-PowerShellRemoting.ps1` is still needed anymore as it may be possible to run `pwsh -c enable-psremoting` from within Windows PowerShell Core removing the need for that script which duplicates `Enable-PSRemoting` capability.
Update: Not able to get the current master build working on Win10 IoT, getting `Invalid access to memory` error. Will have to investigate this separately from this PR and keep `Install-PowerShellRemoting.ps1` for now.
Fix https://github.com/PowerShell/PowerShell/issues/7119
- Add `%WINDIR%\System32\WindowsPowerShell\v1.0\Modules` (Windows PowerShell $PSHOME) to the end of the default PSCore 6 module path (i.e. the module path as initially set at startup).
- Cause an error to be thrown by `Import-Module` when a module with `CompatiblePSEditions` not containing `"Core"` is being loaded from the 'System32' module path.
- Suppress output of modules listed by `Get-Module -ListAvailable` from Windows PowerShell $PSHOME when `CompatiblePSEditions` does not contain `"Core"`.
- Introduce the `-SkipCompatibilityCheck` switch parameter on both `Import-Module` and `Get-Module` to respectively allow importing incompatible modules and listing incompatible modules.
- Adds a `PSEdition` column to the `PSModuleInfo` table view format.
- Ensures that completions are not given for incompatible modules on the System32 module path.
- `ConvertFrom-Markdown` is used for converting a markdown document or string to a MarkdownInfo object. It can optionally return an HTML or a VT100 encoded string in addition to an AST of the markdown document.
- `Show-Markdown` is used to either display the VT100 encoded string on the console or redirect the HTML string to the browser.
- `Set/Get-MarkdownOption` cmdlets are used to view or set markdown rendering options.
Add support to experimental features
RFC: https://github.com/PowerShell/PowerShell-RFC/pull/114
Goals:
Allow experimental features to be declared by PowerShell engine and modules.
Allow experimental features to be enabled via powershell.config.json
Allow Function, Cmdlet, parameters and parameter sets to be shown to the user or hiden from the user depending on whether the associated experimetnal feature is on or off.
Allow discover experimental features using cmdlet Get-ExperimentalFeature
This change merges Jim's fixes with some more I identified that will make the tests more reliable and faster to run.
The changes add functions to wait for the desired state instead of simply waiting a specified period of time, and also speeds up running job script execution time.
* The major refactoring changes are:
- In `ModuleIntrisic.cs`, remove unneeded Windows-PowerShell-only code.
- In `ModuleUtils.cs`
- use the new API `Directory.GetDirectories(string path, string searchPattern, EnumerationOptions enumerationOptions)` and `Directory.GetFiles(string path, string searchPattern, EnumerationOptions enumerationOptions)` to enumerate files and sub-directories within a directory path.
- remove the unused parameter `bool force` from `GetDefaultAvailableModuleFiles(bool force, bool isForAutoDiscovery, ExecutionContext context)`
- refactor the method `GetModuleVersionsFromAbsolutePath`. Add more comments and rename the method name.
- In `ModuleCmdletBase.cs`, refactor the method `GetModuleForNonRootedPaths` to `GetModuleForNames` to simply its implementation.
- In `PSModuleInfo.cs`
- group the declarations of `Declared*Exports` fields together
- rename `_detected*Exports` fields to `Detected*Exports` to group them together. They are internal fields and used outside `PSModuleInfo`.
* There is some perf improvement after this refactoring change:
- For `Get-Module -ListAvailable`, there is about 36% speed improvement for 94 default modules.
- For `Get-Module -ListAvailable -All`, there is about 14% speed improvement for totally 600 module files.
- For `Get-Module <name> -ListAvailable -List`, there is over 17x speed improvement for finding 13 modules from 600 modules. This is because we now filter names using the module file before creating a `PSMdouleInfo` object.
* [FEATURE] Allow Basic Auth over HTTPS
* WSManTransportManager.cs: Simplify HTTPS check
Update comment in test to refer to the right exception type.
* Disable test until limi crash fo selected connection error paths is fixed
* Use Hex format for defining the expected HRESULT
The fix causes a problem in debugging. When stepping over the scripts in debugging mode, the debugger will stop at the switch statement condition expression twice at the very beginning -- one for evaluating the condition, and one for iterating the condition.
Table formatter was overly aggressive in removing padding so even right justified output (default of numbers) gets incorrectly stripped of padding. Fix is when right justified, always add padding (because it's right justified, there's never trailing whitespace).
* Implement location history feature for Set-Location.
This makes it possible to go back to the last directory using 'cd -',
which is exactly the same syntax as on Linux shells.
* Use an existing stack implementation instead of relying on an environment variable and move logic for 'cd -' into the internal class of SessionState.Path.SetLocation
Keep the (additional) setting of an environment for Unix system in case of mixed usage of cd and Set-Location to provide consistency.
* Use a bounded stack with a limit of 1000 and adapt tests.
Remove setting environment variable on Linux as discussed in PR.
* Fix test: use get-location explicitly to avoid subtle difference in the path string (e.g. an additional slash at the end)
Make syntax to .net call of environment consistent with surrounding code
* Move initialization of _workingLocationHistoryStack into constructor of SessionStateInternal and set the limit to 20 as discussed in PR 5051.
* Make new BoundedStack class in engine utils internal
* Fix error when using Get-ChildItem c:
* Fix New-Item test issue.
* Add tests for Get-ChildItem cmdlet.
* Add tests for New-Item cmdlet.
* Fix tests for New-Item cmdlet.
* Fix for #4520 '-ArgumentList should accept @() or $null'
Removed the [ValidateIsNotNulOrEmpty] attribute from the parameter.
* Fixed null and @() empty list tests to not both test null
* [Feature] Fixed test issue on non-Windows; added code to suppress displaying new windows on Windows.
Measure-Object should handle `ScriptBlock` properties. Fixed by renaming `MshExpression` to `PSPropertyExpression` and making it public. Then in `MeasureObjectCommand`, lifting it up to the parameter level. Previously the implementation exposed the Property as a string and
wrapped it internally as a `PSPropertyExpression`. Now the parameter type is `PSPropertyExpression` directly allowing for both wildcard strings and `ScriptBlock`.
`PSPropertyExpression` now lives in a public namespace where it can be used by cmdlet and script authors to easily add the same type of functionality to their commands. I also modified `PSPropertyExpression` to handle hashtables properly as objects so
@{prop = 3} | measure-object prop
and
@{prop = 3} | measure-object {$_.prop}
will work the same. (Previously the example using just the property name would fail.)
Dynamic (DLR) objects work in some places today, but not others. This change expands that support to ForEach-Object, Where-Object and the family of cmdlets that use 'MshExpression' (Select-Object, etc.).
This change addresses both wildcard and non-wildcard cases. In wildcard cases, it uses the existing support of generating PSDynamicMember objects for names returned by GetDynamicMemberNames.
In non-wildcard cases, a dynamic property access is attempted whether or not the name shows up in GetDynamicMemberNames, but a truly "blind" access is only attempted if we see that the base object is an IDMOP. If the dynamic access fails, you'll get the same or a similar error experience as before ("The property 'Blarg' cannot be found", or no error at all, depending on the cmdlet and the strict mode setting).
The included test coverage includes a stub for the.ForEach operator--once people are happy with this change, I can continue by adding support there.
This change should allegedly also have positive perf impact, though in actual perf testing, although it does seem ever-so-slightly faster, I found it difficult to measure much difference at all.
PowerShell serialization has a list of known PowerShell types. When an object is deserialized containing a known type it tries to deserialize the object to that specific type and throws an exception if it can't succeed. SemanticVersion only exists in PSCore6 so when remoting from Windows PowerShell or importing clixml generated from PSCore6 that contains SemanticVersion, it fails.
With this fix, it will be rehydrated as a "PSObject" with "Deseriealized.System.Management.Automation.SemanticVersion" in the 'TypeNames' in both Windows PowerShell and PowerShell Core.
Update links that contain 'en-us' culture to remove 'en-us' culture (if possible) and in some cases update to newer re-directed link to docs.microsoft.com
After parsing `if () { }`, new lines are skipped in order to see if either `elseif` or `else` is present. When neither is present, we should resync back to the pointer before skipping those possibly available new lines, so that the new line tokens can be utilized by the subsequent parsing.
The cleanup is coming from a code review to cleanup psl. Here we clean up the side branch of the code that will allow later to clean up a branch which uses psl.
- IO.FileInfo does not make system calls in constructor. So we can create the object and then use the required attributes without direct call IO.FileInfo.GetAttributes() ( SafeGetFileAttributes() ). This allow us to exclude some p/invoke calls in our code in later cleanups. Also we get unified code for both Windows and Unix.
- Remove SafeGetFileAttributes() and WinSafeGetFileAttributes(). Currently .Net Core support file attributes on all platforms in fastest way and we can remove our workaround. We get a regression in rare case (for files like pagefile.sys). Fix is ready in CoreFX, we get it in 2.1.1. I suggest ignore the regression because this is a very-very rare situation (Get-ChildItem c:\pagefile.sys -Hidden). The .Net Core team was not even able to create an artificial test for such files and uses a real pagefile.sys file for the test. Also the enumeration is still working (dir c:\ -hidden).
- Re-add test which we lost in #4050. The test is pending because of the regression.
Convert ShouldBeErrorId to Should -Throw -ErrorId in PowerShell tests.
Get rid of try { } catch { } formula to assert that errors were thrown.
Small fixes in tests to obey the new Pester -Parameter syntax.
Refactor code to make it easier to maintain and a little faster. Changes are as follows:
1. Support finding a matching signature with variance. But make PowerShell prefer exact match over a match with variance.
2. The metadata signatures in `PSMethod<..>` are generated based on the array of method overloads in `MethodCacheEntry.MethodInformationStructures`, in the exact same order. So in `LanguagePrimitive.ConvertViaParseMethod`, when we try to figure out if there is a match using the metadata signatures in `PSMethod<..>`, we can get the index of the matching signature, and the same index should locate the matching method in `MethodCacheEntry.MethodInformationStructures`. Therefore, we don't need to compare signatures again in the actual conversion method, and instead, we can just leverage the index we found when figuring out the conversion in `ConvertViaParseMethod`.
- This gets rid of the reflection call `GetMethod("Invoke")` and the subsequent signature comparisons in the final conversion method.
- Also, when comparing signatures using `PSMethod<..>` in `ConvertViaParseMethod`, we can just use the generic argument types of each `Func<..>` metadata type, instead of calling `GetMethod("Invoke")` and then `GetParameters()`. This makes the code for comparing signatures simpler (the type `SignatureComparator`).
- Move `MatchesPSMethodProjectedType` from `PSMemberInfo.cs` to the type `SignatureComparator` in `LanguagePrimitives.cs`, as it's closely related to the signature comparison. Also, renamed it to `ProjectedTypeMatchesTargetType`.
- These changes make PSMethod-to-Delegate conversion a little faster, but no big improvement, as the true bottleneck probably is in delegate creation(?). Actually, the performance of this conversion is not critical at all at this moment because this feature should rarely be used in any hot script path. So this exercise is mainly for fun.
3. Remove `PSEnum<T>`. We can directly use enum types when constructing the metadata type `Func<..>`.
4. Remove the code that generates metadata signatures for generic method definitions (call `MakeGenericMethod` with fake types like `GenericType0`, `GenericType1`). This is because:
- We don't support convert generic method to delegate today, so may be better not spending time on preparing the metadata signature types for those methods.
- When the day comes that we need to support it, it's better to use generic argument types directly to construct the `Func<..>` metadata types. I left comments in `GetMethodGroupType` method in `PSMemberInfo.cs` to explain why that approach is better.
closes#6728
Breaking change approved in #6728
This PR switches the logic of when the Web Cmdlets handle redirects when the Authorization header is present. .NET Core 2.1 no longer sends the Authorization header by default (dotnet/corefx#26864). however, we introduced the ability to do so leveraging the previous default behavior through the use of the -PreserveAuthorizationOnRedirect switch.
This PR also corrects a bug introduced 6.0.0 where certain redirect types redirect from POST to GET were set which should have passed through POST to POST and some were improperly passing through POST to POST which should have been doing POST to GET. This correction is a breaking change. It was made apparent as now the redirection behavior is being managed by CoreFX which is doing the correct behavior, tests were added for both when CoreFX and the Web Cmdlets manage redirection.
This regression was introduced by #6523, in `PSModuleInfo.cs`. A circular nested module check was removed because the comment there suggested it happens only with a deprecated workflow module. This causes a `StackOverflow` exception when running into circular nested modules.
Circular nested modules could happen for a module that is not well structured. For example, the module folder `test` contains two files: `test.psd1` and `test.psm1`, and `test.psd1` has the following content:
@{ ModuleVersion = '0.0.1'; RootModule = 'test'; NestedModules = @('test') }
The same value `test` is put in both RootModule and NestedModule, which will end up with a module whose nested module points to itself.
There are two changes in this PR:
1. Add back the check for circular nested modules in `PSModuleInfo.cs`.
2. Remove a wrong `Dbg.Assert` in `ModuleCmdletBase.cs` and two checks before it.
- For the assertion `Dbg.Assert(newManifestInfo.SessionState == ss`, when facing the example above, the nested module will first be loaded with a different session state, and then when trying to load the root module, the same loaded nested module will be reused for it. So 'newManifestInfo.SessionState' is not `ss`. The assertion will fail in that case.
- For the two checks before the assertion, they are not needed anymore based on the comments there.
* Build Update
- Change `TargetFramework` to `netcoreapp2.1` and removed unnecessary `RuntimeFrameworkVersion` from `PowerShell.Common.props`
- Update dotnet SDK to 2.1.300-rc1-008662
- Update `TypeGen` target in `Build.psm1` to work with 2.1
- Rename macOS runtime to `osx-x64` as the old build logic expects 10.12 and breaks running on 10.13 system.
- Remove `PackageReference` to `System.Memory` as it's part of dotnetcore 2.1
- Update search for `crossgen` executable to find the matching version
* Test Update
- Update test tools `WebListener` to latest `asp.net core`
- Marked `AuthHeader Redirect` tests as `Pending` due to change in CoreFX
Fix Select-Object.Tests.ps1 which might fail for Unix OS.
In the test, the processes which name matches i* are selected and it checks if there is non zero number of these processes. The test assumes that there is always at least one process, probably `init` - idle, but on Unix idle process does not have the name and hence the test might fail
- Can compile a source from strings (TypeDefinition and MemberDefinition).
- Can compile from files.
- Can compile only to a file (without loading the produced assembly).
- Do not recompile and don't reload if the sources have not changed.
- Implement `-IgnoreWarnings` to not treat warnings as errors. By default, the cmdlet considers warnings as errors.
- Add VisualBasic support.
- Add new `-CompilerOptions` parameter to allow setting Roslyn command line parameters including:
- Parser options.
- Compile options.
- Emit options.
**ATTENTION:** The `CompilerOptions` can be specified along with other options like `-OutputAssembly`, `-Language` and `-IgnoreWarnings`. The explicit setting parameters will take precedence over the same settings specified in `-CompileOptions`.
See docs about the compiler options:
https://github.com/dotnet/roslyn/blob/master/docs/compilers/CSharp/CommandLine.mdhttps://github.com/dotnet/roslyn/blob/master/docs/compilers/Visual%20Basic/CommandLine.md
**ATTENTION:** `-OutputType` default is `Library`. If `-OutputType` is absent the `-OutputType` default overlaps a value in `CompileOptions`. In other words output type ("target" ot "t" in command line) is always ignored in `CompileOptions`. We have to use `-OutputType` to set an output type.
- For ConsoleHosts tests, the test is validating error condition, but did not redirect stderr to stdout so the output isn't captured and thus an empty string failing the assertion.
- For SSHConnectionInfo API tests, it's calling a constructor that got overwritten with a new parameter. Fix is to put back that public API and overload it with a new one.
These changes port Windows PowerShell support for Applocker and DeviceGuard User Mode Code Integrity (UMCI) to PSCore6. Windows PowerShell uses public APIs to determine if a system is in locked down mode via AppLocker or DeviceGuard, and automatically runs in constrained language mode. For more information about PowerShell constrained language, see: https://blogs.msdn.microsoft.com/powershell/2017/11/02/powershell-constrained-language-mode/
This support for application whitelisting has mostly existed in PSCore6, but the primary APIs were stubbed out in CorePSStub.cs because they relied on Windows only DeviceGuard (wldp.dll) and AppLocker (Safer APIs) public APIs. These changes re-implement PowerShell lock down APIs on PSCore6 for Windows platforms only. The AppLocker and DeviceGuard public APIs are currently only implemented in Windows OSes and are not supported on Linux or MacOS platforms.
Tests have also been ported to PSCore6 and run only for Windows platforms.
Create the default PSSession configuration, not tied to a specific PowerShell version.
When Enable-PSRemoting command is run, it creates 2 sessions configurations:
first, the same as it was before with the name containing the current version expressed as: 'PowerShell.$PSVersionTable.GitCommitId'
second with the default name 'PowerShell.6' so that administrators wouldn't have to guess which specific version is installed on the target.
PR addresses the issue: #6470
* Use UTC datetime in Get-Date -UFormat %s
Fix %l output from 0..11 to 1..12
Fix %V using Gregorian calendar
* Use a workaround for ISO 8601 week of year (uformat %V)
The HTTP RFC (https://tools.ietf.org/html/rfc7231#section-6.4) does not require a Location header to be present for redirects, thus it is required to check if the Location header is returned before using it.
The Test-Connection cmdlet works on Windows and Unix.
Implemented:
Ping
Continues Ping
Traceroute
Detect MTU size (seems don't work on Unix because of .Net Core issue)
Connect to TCP port
Not jet implemented:
I'm putting this off for the future.
Detect blackhole routers
PingPath
Additional considerations
As you can see in the tests .Net Core has issues in API implementation. As a result, some tests are skipped on Unix. There is also one issue on Windows. Related comments added to tests.
I'm going to open an issue(s) in CoreFX repo.
I think we should break the feedback into two parts:
scripting functionality
interactive functionality (display output)
Now I have implemented the output to the screen as the progress bar and as text (without ETS) - we have to decide what is best to use.
* Add checking if an output width is specified.
* change _failedToReadConsoleWidth variable to _noConsole bool value.
This variable is to cache the default console width when failed to get 'Console.WindowWidth' value.
* Terminate the loop in GetMainModule if main module is null.
* Run tests with FileVersionInfo also on non-windows platforms. Add test for process which main module can be null.
* In cases where the header spans multiple rows, need to correctly calculate whitespace and trim appropriately
* Use System.Span<int> and C# 7.2 language in SMA
* Added new ref assemblies to Files.wxs
refactor tests to remove similar xml content
added single column test case
Clean up workflow logic in the module loading component.
Workflow module is not supported in PSCore.
Currently, Import-Module throws a terminating error when seeing .xaml modules. After the change, Import-Module throws a non-terminating error when seeing .xaml modules.
This PR fixes the logging issue on Linux where logging is initialized before `-settingsFile` is parsed causing custom log settings to be ignored. (see ConsoleHost.cs and ManagedEntrance.cs)
The PR also includes basic logging tests for Linux and MacOS. PSSyslog.psm1 contains the functions to retrieve selected logged items (based on PowerShell's log id and a timestamp) and Logging.Tests.ps1 contains tests for Linux and MacOS.
Fix error in windows provider when the environment has accidental duplicates that differ only by case.
Make the provider storage for the environment on windows ignore duplicates and only report the effective value.
Add tests to verify existing environment get-item behavior and to ensure that Get-Item env:<var> reports the same as $env:<var>, namely the effective value.
Fixes#6305 and supersedes #6320 based on discussion in #6460.
Fixes#5964
Adds -Resume switch to Invoke-WebRequest and Invoke-RestMethod
-Resume requires -OutFile
Enables the ability to resume downloading a partially or incompletely downloaded file.
File Size is the only indicator of local and remote file parity.
If the local file is smaller than the remote file and the remote endpoint supports resume, the local file will be appended with the remaining bytes.
If the local file is larger than the remote file, the local file will be overwritten
If the remote server does not support resume, the local file will be overwritten
If the local file is the same size as the remote file, the remote endpoint will return a 416 status code. This response is special-cased as a success in this instance. The local file remains untouched and it is assumed the file was already successfully downloaded previously.
If the local file does not exist it will be created and the entire remote file will be requested.
Added tests for all code new code paths (I'm pretty sure anyway)
Added /Resume Controller to WebListener
Documented /Resume Controller
Updated .spelling to reflect terms in WebListener docs
Note: I had to change the way GetResponse() tracks the current URI as we now have 3 places where the call is taking place. I don't foresee this causing any regressions. This area needs some refactoring. especially if we want to implement a retry mechanism
* commands: make rvpa -relative do not return ./absolute_path
This happens on Windows when $pwd and -path is on different drive
* only return relative path inside current root
1. Add a null check in the tab completion code on the binding result returned from `PseudoParameterBinder`;
2. Add a null check in `CommandDiscovery.LookupCommandProcessor` on the `CommandInfo` object returned from the method `LookupCommandInfo`.
For a PropertyOnlyAdapter, the property may come from various sources, but methods, including parameterized properties, still come from DotNetAdapter. So, the binder can optimize on method calls for objects that map to a custom PropertyOnlyAdapter.
Add support for replacement lambdas when using the -replace operator.
Requires minimal changes to existing code by using the following overload:
Regex.Replace(string input, MatchEvaluator evaluator)
when a ScriptBlock is passed in as the replacement argument.
Also remove a couple of language tests which were actually duplicated
Change the one loop which loops through test cases to include an iteration number to remove test name duplication
* Tests for Get-Process cmdlet.
* Tests for Get-Process run as admin.
* Skipping some Get-Process tests on Linux
* Skip test for -FileVersionInfo parameter for Linux because of the bug that cause the command to hang.
* Add checks for ErrorId in Get-Process tests
* Change one Get-Process test status to pending for MacOs
Some CI level 'Save-Help' tests were disabled in #2806 because HelpInfo URIs for powershell modules were broken (tracked by #2807). However, they were forgotten to be enabled when the URI issue was fixed. This PR reenables those tests.
- The original change to remove extra padding didn't take into account alignment.
Fix logic to accommodate left, center, and right alignment in the table format and also add tests.
- Fix ImplicitRemoting test that validates formatting to use same instance due to formatting changes in this PR
- Only use loopback to same powershell instance for formatting test as the other tests implicitly expect Windows PowerShell.
- Fixes issue #4634 by throwing a terminating error as agreed.
- Makes the command not rely on the presence of the TEMP environment variable to get path to temp directory and use the .Net method Path.GetTempPath() instead.
- Catch exception more specific as given by the documentation
- Improve existing test.
* add common write aliases
* add Message alias to the MessageData parameter for Write-Information
add Msg and Message alias to the Object perameter for Write-Host
* Add tests for new aliases
When a charset is not supplied for a JSON response, the default encoding should be UTF-8 per RFC 8259. This commit changes the default charset to UTF-8 for JSON responses when a charset is not defined.