9f9db39041 QA/mininode: Send all headers upfront in send_blocks_and_test to avoid sending an unconnected one (Luke Dashjr)
Pull request description:
While this doesn't currently trigger any problems, the network protocol does expect headers to be sent connectable in normal circumstances, and if too many are sent out of order will disconnect the peer.
ACKs for commit 9f9db3:
Tree-SHA512: 25b88718e4ba3d31aed2de7ece23fab9a0737fd6536c5e618ea8eb5a3a217dab0dffaebc4892df7993bcea7efb7c4fb5085fabebe99535b8f7fdde3c19df54ff
c634b1e20 [POLICY] Make sending to future native witness outputs standard (Pieter Wuille)
Pull request description:
As discussed in the April 18 2019 IRC meeting.
This makes sending to future Segwit versions via native outputs (bech32) standard for relay, mempool acceptance, and mining. The reasons are:
* This may interfere with smooth adoption of future segwit versions, if they're defined (by the sender wallet/node).
* It violates BIP173 ("Version 0 witness addresses are always 42 or 62 characters, but implementations MUST allow the use of any version."), though admittedly this code was written before BIP173.
* It doesn't protect much, as P2SH-embedded segwit cannot be filtered in this way.
* As a general policy, the sender shouldn't care what the receiver likes his outputs to be.
Note that _spending_ such outputs (including P2SH-embedded ones) remains nonstandard, as that is actually required for softfork safety.
ACKs for commit c634b1:
MarcoFalke:
utACK c634b1e207
harding:
Tested ACK c634b1e207
meshcollider:
utACK c634b1e207
Tree-SHA512: e37168a1be9f445a04d4280593f0a92bdae33eee00ecd803d5eb16acb5c9cfc0f1f0a1dfbd5a0cc73da2c9928ec11cbdac7911513a78f85b789ae0d00e1b5962
a014373d81 QA: Avoid re-reading config.ini unnecessarily (Luke Dashjr)
Pull request description:
BitcoinTestFramework.main already loads and stores config.ini on the object itself; just access that instead of re-reading the file to check for features
ACKs for commit a01437:
practicalswift:
utACK a014373d81
hebasto:
utACK a014373d81
Tree-SHA512: 36e3dda36cf4fae243feb1655da2891d1b78c86319be9bd9809c20054fa0cb75749370b05aa9d589a4dcab6322d8cdf4e874c5175144ed23ba63b2ed338538ca
BitcoinTestFramework.main already loads and stores config.ini on the object itself; just access that instead of re-reading the file to check for features
c87fc71f7e Bugfix: test/functional/rpc_psbt: Correct test description comment (Luke Dashjr)
097c4aa379 Bugfix: test/functional/rpc_psbt: Remove check for specific error message that depends on uncertain assumptions (Luke Dashjr)
Pull request description:
When converttopsbt is called with a signed transaction, it either fails with "TX decode failed" if one or more inputs were segwit, or "Inputs must not have scriptSigs and scriptWitnesses" otherwise.
Since no effort is made by the test to ensure the inputs are segwit or not, avoid checking the exact message used.
The error code is still checked to ensure it is of the correct kind of failure.
ACKs for commit c87fc7:
instagibbs:
utACK c87fc71f7e
achow101:
utACK c87fc71f7e
Tree-SHA512: 61312b5d49aa50652902f30ba9693dfba9e5b7e6478f23becda20202d8b328ddb3e040f2199b617a68df133a5f1f8b5d68bc19d4621303f17c1963dca01bd9ef
faca95effd qa: Make swap_magic_bytes in p2p_invalid_messages atomic (MarcoFalke)
Pull request description:
Otherwise, this will lead to errors logged in the network thread:
https://travis-ci.org/MarcoFalke/bitcoin/jobs/513076282#L2765
ACKs for commit faca95:
Tree-SHA512: 8bc8280f9c0e8d40bc68c0ff1cab1c3386cbfef0728dbab5f29c2606dd65a9ac3c695b0c286be707a9f2bd62a6f87ac2032d7749fc2cf8b9fa1eba3c4cf70933
fa1c8e297 Resolve the qt/guiutil <-> qt/optionsmodal CD (251)
Pull request description:
This pull request attempts to resolve the `qt/guiutil` <-> `qt/optionsmodel` circular dependency.
The `Intro` class in `qt/intro` has a static member function `getDefaultDataDirectory` which is used by `qt/optionsmodel` and creates the circular dependency
`qt/guiutil -> qt/walletmodel -> qt/optionsmodel -> qt/intro -> qt/guiutil`.
This circular dependency is resolved by moving `Intro::getDefaultDataDirectory` to `GUIUtil::getDefaultDataDirectory` without modifying the implementation.
ACKs for commit fa1c8e:
MarcoFalke:
utACK fa1c8e2978
promag:
utACK fa1c8e2.
hebasto:
utACK fa1c8e2978
practicalswift:
utACK fa1c8e2978
jonasschnelli:
utACK fa1c8e2978
Tree-SHA512: 58cc4aee937c943d8de9dc97ef1789decfddb0287308f44e7e3a3b497c19e51da184988e17207544fff410168ec98dd49a3e62c47e84ad1f0cf6ef7247a80fb5
This pull request attempts to resolve the `qt/guiutil` <-> `qt/optionsmodel`
circular dependency.
The circular dependency is resolved by moving the `Intro::getDefaultDataDirectory`
member function to `GUIUtil::getDefaultDataDirectory`.
b67978529a Add comments to Python ECDSA implementation (John Newbery)
8c7b9324ca Pure python EC (Pieter Wuille)
Pull request description:
This removes the dependency on OpenSSL for the interaction tests, by providing a pure-Python
toy implementation of secp256k1.
ACKs for commit b67978:
jnewbery:
utACK b67978529a
Tree-SHA512: 181445eb08b316c46937b80dc10aa50d103ab1fdddaf834896c0ea22204889f7b13fd33cbcbd00ddba15f7e4686fe0d9f8e8bb4c0ad0e9587490c90be83966dc
418d3230f8 Resolve the checkpoints <-> validation CD. (251)
Pull request description:
This pull request attempts to resolve the `checkpoints -> validation -> checkpoints` circular dependency.
The circular dependency is resolved by moving the `CheckPoints::GetLastCheckpoint(const CCheckpointData& data)` function to `validation.cpp` where it used exclusively by the private function `ContextualCheckBlockHeader(const CBlockHeader& block, CValidationState& state, const CChainParams& params, const CBlockIndex* pindexPrev, int64_t nAdjustedTime)`.
ACKs for commit 418d32:
promag:
utACK 418d323, only `GetLastCheckpoint` usage is in `validation.cpp` and so makes sense to move it there.
practicalswift:
utACK 418d3230f8
MarcoFalke:
utACK 418d3230f8
sipa:
utACK 418d3230f8
Tree-SHA512: 03c3556bc192e65f5e3fa76fd545d4ee7d63d3fb06b132f7a1fa6131aa21ddd2e5b2d19e2222dfe524f422daaca30efde219bed188db8c74ff4b088876b5bc16
c7efb652f3 blockfilter: Update BIP 158 test vectors. (Jim Posen)
19308c9e21 rpc: Add getblockfilter RPC method. (Jim Posen)
ff35105096 init: Add CLI option to enable block filter index. (Jim Posen)
accc8b8b18 index: Access functions for global block filter indexes. (Jim Posen)
2bc90e4e7b test: Unit test for block filter index reorg handling. (Jim Posen)
6bcf0998c0 test: Unit tests for block index filter. (Jim Posen)
b5e8200db7 index: Implement lookup methods on block filter index. (Jim Posen)
75a76e3619 index: Implement block filter index with write operations. (Jim Posen)
2ad2338ef9 serialize: Serialization support for big-endian 32-bit ints. (Jim Posen)
ba6ff9a6f7 blockfilter: Functions to translate filter types to/from names. (Jim Posen)
62b7a4f094 index: Ensure block locator is not stale after chain reorg. (Jim Posen)
4368384f1d index: Allow atomic commits of index state to be extended. (Jim Posen)
Pull request description:
This introduces a new BlockFilterIndex class, which is required for BIP 157 support.
The index is uses the asynchronous BaseIndex infrastructure driven by the ValidationInterface callbacks. Filters are stored sequentially in flat files and the disk location of each filter is indexed in LevelDB along with the filter hash and header. The index is designed to ensure persistence of filters reorganized out of the main chain to simplify the BIP 157 net implementation.
Stats (block height = 565500):
- Syncing the index from scratch takes 45m
- Total index size is 3.8 GiB
ACKs for commit c7efb6:
MarcoFalke:
utACK c7efb652f3
ryanofsky:
Slightly tested ACK c7efb652f3 (I just rebuilt the index with the updated PR and tested the RPC). Changes since last review: rebase, fixed compile errors in internal commits, new comments, updated error messages, tweaked cache size logic, renamed commit method, renamed constants and globals, fixed whitespace, extra BlockFilterIndex::Init error check.
Tree-SHA512: f8ed7a9b6f76df45933aa5eba92b27b3af83f6df2ccb3728a5c89eec80f654344dc14f055f6f63eb9b3a7649dd8af6553fe14969889e7e2fd2f8461574d18f28
fab6a0a659 test: Add test that addmultisigaddress fails for watchonly addresses (MarcoFalke)
fad81d870a test: Fixup creatmultisig documentation and whitespace (MarcoFalke)
Pull request description:
Just to make sure this is not regressed on accidentally in the future
ACKs for commit fab6a0:
jonatack:
ACK fab6a0a659
Tree-SHA512: bf8dcbc752f8910902a995e55ce486621156aa01f112990344815c4aab980298dfecc108e78245a8986a00c3871338ad16fc818a1bce9dfc6b37b9c88851e39d
aa410c2b17 rpc: Validate maxfeerate with AmountFromValue (João Barbosa)
Pull request description:
With this change `maxfeerate` can also be set as a string, accordingly to the help test:
```
maxfeerate (numeric or string,
```
Beside, there are no tests for the removed errors.
ACKs for commit aa410c:
meshcollider:
utACK aa410c2b17
MarcoFalke:
utACK aa410c2b17 Good catch
Tree-SHA512: f3bfea91dc7daa943729e270585dbf333055aeda805fbd01eaab20a7e0e6147382647c11525334382d198df0d3d45da6102b541efda5a1361f96271c98d5d89d
184f8785f wallet_bumpfee.py: add test for change key preservation (Gregory Sanders)
d08becff8 add functional tests for feerate bumpfee with adding inputs (Gregory Sanders)
0ea47ba7b generalize bumpfee to add inputs when needed (Gregory Sanders)
Pull request description:
When targeting a feerate using `bumpfee`, call a new function that directly uses `CWallet::CreateTransaction` and coin control to get the desired result. This allows us to get a superset of previous behavior, with an arbitrary RBF bump of a transaction provided it passes the preconditional checks and spare confirmed utxos are available.
Note(s):
0) The coin selection will use knapsack solver for the residual selection.
1) This functionality, just like knapsack coin selection in general, will hoover up negative-value inputs when given the chance.
2) Newly added inputs must be confirmed due to current Core policy. See error: `replacement-adds-unconfirmed`
3) Supporting this with `totalFee` is difficult since the "minimum total fee" option in `CreateTransaction` logic was (rightly)taken out in #10390 .
ACKs for commit 184f87:
jnewbery:
utACK 184f8785f7
Tree-SHA512: fb6542bdfb2c6010e328ec475cf9dcbff4eb2b1a1b27f78010214534908987a5635797196fa05edddffcbcf2987335872dc644a99261886d5cbb34a8f262ad3e
fafe5f0d09 test: Remove unused imports (MarcoFalke)
fa16a09215 scripted-diff: use self.sync_* methods (MarcoFalke)
faf77f9b90 test: Pass self to test_simple_bumpfee_succeeds (MarcoFalke)
fa6dc7c5c3 test: Add BitcoinTestFramework::sync_* methods (MarcoFalke)
fafe008cb4 test: Pass at most one node group to sync_all (MarcoFalke)
fa4680ed09 scripted-diff: Rename sync_blocks to send_blocks to avoid name collisions and confusion (MarcoFalke)
Pull request description:
This adds methods to the test framework that can be called by just `self.sync_*()`.
This avoids having to import the underlying util method. Also, in the default case, where all nodes are synced this avoid having to pass `self.nodes` explicitly.
So the effective changes are:
```diff
@@
-from test_framework.util import sync_blocks, sync_mempools
@@
- sync_blocks(self.nodes)
+ self.sync_blocks()
@@
- sync_mempools(self.nodes)
+ self.sync_mempools()
ACKs for commit fafe5f:
promag:
utACK fafe5f0.
jonatack:
ACK fafe5f0d09, nice simplification.
Tree-SHA512: 5c81840edf9fb3c5de2d7bf95ca36a5a8d23567cd1479a0f4044547c2080e9a3c5cf375357bc8eebb5b68829be050a171ab2512cfd47b89feed51fe3bad2cd72
4d074e84a2 [build] Move AnalyzePSBT from psbt.cpp to node/psbt.cpp (Russell Yanofsky)
fd509bd1f7 [docs] Document src subdirectories and different libraries (John Newbery)
9eaeb7fb8d [build] Move wallet load functions to wallet/load unit (John Newbery)
91a25d1e71 [build] Add several util units (John Newbery)
99517866b6 [build] Move several units into common libraries (John Newbery)
0509465542 [build] Move rpc rawtransaction util functions to rpc/rawtransaction_util.cpp (John Newbery)
1acc61f874 [build] Move rpc utility methods to rpc/util (John Newbery)
4a75c9d651 [build] Move policy settings to new src/policy/settings unit (John Newbery)
fdf8888b6f [build] Move CheckTransaction from lib_server to lib_consensus (John Newbery)
Pull request description:
This is a move-only commit. No code is changing and the moves can be easily verified with:
```sh
git log -p -n1 --color-moved=dimmed_zebra
```
This commit moves functions and variables that wallet code depends on out of libbitcoin_server.a, so the bitcoin-wallet tool can be built without libbitcoin_server.a in #15639, and attempting to access server state from wallet code will result in link errors instead of silently broken code.
List of moves:
- `CheckTransaction` moves from `consensus/tx_verify.cpp` to `consensus/tx_check.cpp`
- `urlDecode` moves from `httpserver.cpp` to `util/url.cpp`
- `TransactionErrorString` moves from `node/transaction.cpp` to `util/error.cpp`
- `StringForFeeReason` and `FeeModeFromString` move from `policy/fees.cpp` to `util/fees.cpp`
- `incrementalRelayFee` `dustRelayFee` and `nBytesPerSigOp` move from `policy/policy.cpp` to `policy/settings.cpp`
- `SignalsOptInRBF` moves from `policy/rbf.cpp` to `util/rbf.cpp`
- `fIsBareMultisigStd` moves from `validation.cpp` to `policy/settings.cpp`
- `ConstructTransaction` `TxInErrorToJSON` and `SignTransaction` move from `rpc/rawtransaction.cpp` to `rpc/rawtransaction_util.cpp`
- `RPCTypeCheck` `RPCTypeCheckArgument` `RPCTypeCheckObj` `AmountFromValue` `ParseHashV``ParseHashO` `ParseHexV` `ParseHexO` `HelpExampleCli` and `HelpExampleRpc` move from `rpc/server.cpp` to `rpc/util.cpp`
- `AmountHighWarn` and `AmountErrMsg` move from `ui_interface.cpp` to `util/error.cpp`
- `FormatStateMessage` and `strMessageMagic` move from `validation.cpp` to `util/validation.cpp`
- `VerifyWallets` `LoadWallets` `StartWallets` `FlushWallets` `StopWallets` and `UnloadWallets` move from `wallet/init.cpp` to `wallet/node.cpp`
ACKs for commit 4d074e:
jnewbery:
utACK 4d074e84a2 (checked by doing the rebase myself and verifying no difference between my branch and 4d074e84a2)
Tree-SHA512: 5e1604a9fb06475f2b96da0de0baa8330f4dda834dc20a0183ef11e1e4c27631d1d1bbb9abf0054efc03d56945fdf9920f63366b6a4f200f665b742a479ff75c
fae38c3dc6 doc: Fix all typos reported by codespell (MarcoFalke)
fa9058f0ed doc: Add release notes for 15629 (MarcoFalke)
fa4a922d78 qa: Add test for missing testnet section in conf file (MarcoFalke)
dddd6f0f58 init: Throw error when network specific config is ignored (MarcoFalke)
Pull request description:
This should have no effect on mainnet users, but simplifies testing, where config settings are currently ignored with only a warning. Fix this by making it an error.
Issues:
* bitcoin client 0.17.0 ignores wallet's name (file) #14523
* Can't set custom rpcport on testnet #13777
* ...
ACKs for commit fae38c:
Tree-SHA512: 2e209526898eea6e444c803ec2666989cee4ca137492d32984998733c50a70056cb54657df8dc3027a6a0612738a8afce0bc35824b868c5f22281e00e0188530
833d98ae0 [wallet] Remove unnecessary Chain::Lock parameter from ResendWalletTransactions (John Newbery)
52b760fc6 [wallet] Schedule tx rebroadcasts in wallet (John Newbery)
f463cd107 [wallet] Keep track of the best block time in the wallet (John Newbery)
Pull request description:
Remove the `Broadcast()`/`ResendWalletTransactions()` notification from the Validation interface.
Closes#15619. See that issue for discussion.
ACKs for commit 833d98:
ryanofsky:
utACK 833d98ae07. No changes, just rebase.
Tree-SHA512: 7689f2083608ebad8c95ab6692f7842754e1ebe5508bc926a89cad7105cce41007648f37341ba5feb92b30a7aa87acd3abf264a4f1874e35a7161553f6ff3595
Adds the following util units and adds them to libbitcoin_util:
- `util/url.cpp` takes `urlDecode` from `httpserver.cpp`
- `util/error.cpp` takes `TransactionErrorString` from
`node/transaction.cpp` and `AmountHighWarn` and `AmountErrMsg` from
`ui_interface.cpp`
- `util/fees.cpp` takes `StringForFeeReason` and `FeeModeFromString` from `policy/fees.cpp`
- `util/rbf.cpp` takes `SignalsOptInRBF` from `policy/rbf.cpp`
- 'util/validation.cpp` takes `FormatStateMessage` and `strMessageMagic` from 'validation.cpp`
This moves the following policy settings functions and globals to a new
src/policy/settings unit in lib_server:
- `incrementalRelayFee`
- `dustRelayFee`
- `nBytesPerSigOp`
- `fIsBareMultisigStd`
These settings are only required by the node and should not be accessed
by other libraries.
Removes the now-unused Broadcast/ResendWalletTransactions interface from
validationinterface.
The wallet_resendwallettransactions.py needs a sleep added at the start
to make sure that the rebroadcast scheduler is warmed up before the next
block is mined.
b5d398772 Take non-importing keys into account for spendability warning in descriptor import (Pieter Wuille)
6e597001a Import all origin info in importmulti; even for non-importing pubkeys (Pieter Wuille)
9a93c91c8 Keep full pubkeys in FlatSigningProvider::origins (Pieter Wuille)
Pull request description:
This fixes#15743 and #15742.
Since #15263, pubkeys are no longer imported for non-PKH (or WPKH, or any wrapped form of those) outputs, as that would incorrectly mark outputs to single-key versions of multisig policies as watched.
As a side effect, this change also caused origin info not to be imported anymore for multisig policies.
Fix this by plumbing through the full pubkey information for origins in FlatSigningProvider, and then importing all origin info we have in `importmulti` (knowing more never hurts, and additional origin information has no negative consequences like importing the pubkeys themselves).
ACKs for commit b5d398:
MeshCollider:
utACK b5d3987724
Tree-SHA512: 37caa2be8d01b8baa12f70a58eaa7c583f5f0afbe012e02936dd8790dc5dc852f880b77258b34ddb68cae30c029585f2d1c4f5d00015380557a1e8b471e500f3
8f5d9431a Add regtests for HTTP status codes. (Daniel Kraft)
Pull request description:
This adds explicit tests for the returned HTTP status codes to `interface_rpc.py` (for error cases) and the HTTP JSON-RPC client in general for success.
#15381 brought up discussion about the HTTP status codes in general, and the general opinion was that the current choice may not be ideal but should not be changed to preserve compatibility with existing JSON-RPC clients. Thus it makes sense to actually test the current status to ensure this desired compatibility is not broken accidentally.
ACKs for commit 8f5d94:
laanwj:
utACK 8f5d9431a3
promag:
utACK 8f5d943.
jonasschnelli:
utACK 8f5d9431a3
Tree-SHA512: 82503ccd134dd9145304e95cb6c61755f100bee27593d567cdd5c0c554d47e7b06d937456cab04107f46f4984930355db65d5e711008a0b05f2b8feec9f2950e
7813eb1db1 [qa] Overhaul p2p_compactblocks.py (Suhas Daftuar)
Pull request description:
Remove tests of:
- compactblock behavior in a simulated pre-segwit version of bitcoind
This should have been removed a long time ago, as it is not generally
necessary for us to test the behavior of old nodes (except perhaps if we
want to test that upgrading from an old node to a new one behaves properly)
- compactblock behavior during segwit upgrade (ie verifying that network
behavior before and after activation was as expected)
This is unnecessary to test now that segwit activation has already happened.
ACKs for commit 7813eb:
jnewbery:
utACK 7813eb1db1
Tree-SHA512: cadf035e6f822fa8cff974ed0c2e88a1d4d7da559b341e574e785fd3d309cc2c98c63bc05479265dc00550ae7b77fc3cbe815caae7f68bcff13a04367dca9b52
ea1a2d8794 [wallet] Remove ResendWalletTransactionsBefore (John Newbery)
f5162458cd [rpc] remove resendwallettransactions RPC (John Newbery)
Pull request description:
Remove resendwallettransactions RPC method
This RPC was added for testing wallet rebroadcasts. Since we now have a real test for wallet rebroadcasts, it's no longer needed.
The call in wallet_basic.py can be removed because wallet_resendwallettransactions.py tests wallet rebroadcast.
ACKs for commit ea1a2d:
MarcoFalke:
re-utACK ea1a2d8794
promag:
utACK ea1a2d8.
Tree-SHA512: 48245d947be1a2d2b8c30d2946105818c454a03b70b63534ecadf2144da64dafe1c9527ea670a5f4d1acd05ccdfc6c9be43ca636ee2ba58a8b7a7b2fc7bc88fd
Remove tests of:
- compactblock behavior in a simulated pre-segwit version of bitcoind
This should have been removed a long time ago, as it is not generally
necessary for us to test the behavior of old nodes (except perhaps if we
want to test that upgrading from an old node to a new one behaves properly)
- compactblock behavior during segwit upgrade (ie verifying that network
behavior before and after activation was as expected)
This is unnecessary to test now that segwit activation has already happened.
Includes changes by John Newbery.
This RPC was added for testing wallet rebroadcasts. Since we now have a
real test for wallet rebroadcasts, it's no longer needed.
The call in wallet_basic.py can be removed because
wallet_resendwallettransactions.py tests wallet rebroadcast.
This commit makes the pruning.py much faster.
Key insights to do this:
- pruning.py doesn't care what kind of transactions make up the big
blocks that are pruned in the test. Instead of making blocks with
several large, expensive to construct and validate transactions,
instead make the large blocks contain a single coinbase transaction with
a huge OP_RETURN txout.
- avoid stop-starting nodes where possible.
This test could probably be made even faster by using the P2P interface
for submitting blocks instead of the submitblock RPC.
529c1ae4a0 [tests] Add test for wallet rebroadcasts (John Newbery)
Pull request description:
The existing wallet_resendwallettransactions.py test only tests the
resendwallettransactions RPC. It does not test whether transactions are
actually rebroadcast, or whether the rebroadcast logic is called on a
timer.
Update the test to not use the resendwallettransactions RPC and test
that transactions are resent on a timer.
ACKs for commit 529c1a:
MarcoFalke:
re-utACK 529c1ae4a0
Tree-SHA512: 7341e7dd07cdc8ecbc08b1949121824148d2b58133a8e298ecdc5b7555713df3cecffb49854443cef9f033ef847cbf329e879a3bf57ab4e1fc733be432e9f718
The existing wallet_resendwallettransactions.py test only tests the
resendwallettransactions RPC. It does not test whether transactions are
actually rebroadcast, or whether the rebroadcast logic is called on a
timer.
This commit updates the test to not use the resendwallettransactions RPC and
test that transactions are rebroadcast on a timer.
e9d5e97561 Poly1305: tolerate the intentional unsigned wraparound in poly1305.cpp (Jonas Schnelli)
b34bf302f2 Add Poly1305 bench (Jonas Schnelli)
03be7f48fa Add Poly1305 implementation (Jonas Schnelli)
Pull request description:
This adds a currently unused Poly1305 implementation including test vectors from RFC7539.
Required for BIP151 (and related to #15512).
Tree-SHA512: f8c1ad2f686b980a7498ca50c517e2348ac7b1fe550565156f6c2b20faf764978e4fa6b5b1c3777a16e7a12e2eca3fb57a59be9c788b00d4358ee80f2959edb1
This commit resolves the checkpoints -> validation -> checkpoints
cirular dependency by moving
`CheckPoints::GetLastCheckpoint(const CCheckpointData& data)` from
`checkpoints.cpp` to `validation.cpp`.
947f73ceba [docs] remove reference to signrawtransaction in the developer docs. (John Newbery)
7b6616b78b [rpc] Remove deprecated functionality message from validateaddress help (John Newbery)
839c3f7c49 [rpc] Remove signrawtransaction warning (John Newbery)
Pull request description:
Removes some deprecated code from the RPCs:
- signrawtransaction was deprecated in 0.17 and removed in 0.18. A warning message was left in place to advise users to use signrawtransactionwithwallet and signrawtransactionwithkey. That warning can now be removed.
- validateaddress had some functionality deprecated in 0.17 and removed in 0.18. The help text for that functionality was not removed in 0.18 and can be removed now.
Tree-SHA512: 981678a697954ff2c392752e5a183b4b12c4eb94f55766ee1aa97a70d300668237db8fc5748c2772869d0155ba4a93e38817887b98160ee972a6f6ee94e3f7d9
signrawtransaction was deprecated in 0.17 and removed in 0.18. A warning
was left in place to tell users to migrate to using
signrawtransactionswithwallet or signrawtransactionwithkey. Remove the
warning now that it's been two releases since the method was removed.
And use it to fix a race condition in mempool_persist.py:
https://travis-ci.org/Empact/bitcoin/jobs/487577243
Since e.g. getrawmempool returns errors based on this status, this
enables users to test it for readiness.
7abd2e697c wallet/rpc: add maxfeerate parameter to testmempoolaccept (Karl-Johan Alm)
6c0a6f73e3 wallet/rpc: add maxfeerate parameter to sendrawtransaction (Karl-Johan Alm)
e5efacb941 test: Refactor vout fetches in rpc_rawtransaction (Karl-Johan Alm)
Pull request description:
This adds a new `maxfeerate` parameter to `sendrawtransaction` which forces the node to reject a transaction whose feerate is above the given fee rate.
This is a safety harness from shooting yourself in the foot and accidentally overpaying fees.
See also #12911.
Tree-SHA512: efa50134a7c17c9330cfdfd48ba400e095c0a419cc45e630618d8b44929c25d780d1bb2710c1fbbb6e687eca373505b0338cdaa7f2ff4ca22636d84c31557a2e
2e5d482659 tests: Print remaining jobs in test_runner.py (Steven Roose)
Pull request description:
This helps finding out which tests fail to finish.
Tree-SHA512: d22beb82beecd33aaa50731c83075e49577842d29fd21aa63bcb859df5da99069eba9cc16eed5d91dbba8fb0fdc317fb88b3b370c4d3917e9da1cd13b0a622dc
3f6568d66b cli: remove duplicate wallet fields from -getinfo (fanquake)
Pull request description:
`walletversion` and `balance` are both included below.
Tree-SHA512: cd9fe9739a2f492c8f7c0407b43a6fa95187f7e5318f05e080bac112f9f4333d2e9b84c505d098f8d66fa79439007d1c0b22e5a87d70bf5ea53ab647ee4c2046
21be609b49 In lint-format-strings, open files sequentially (Glenn Willen)
Pull request description:
In lint-format-strings, we use python argparse to read our file arguments. In
this mode, argparse opens all the files simultaneously. On OS X, where the
default filehandle limit is 128, this causes the lint to fail. Instead, ask
argparse for our filename arguments as strings, and open them one at a time
using 'with open'.
Tree-SHA512: 4c7dabf98818a7c5d83ab10c61b89a26957fe399e39e933e30c561cb45c5e8ba6f6aedcde8343da0c32ee340289a8897db6a33708e35ee381334ee27e3f4d356
fa2797808e test: Remove python3.4 workaround in feature_dbcrash (MarcoFalke)
dddd1d05d3 .python-version: Specify full version 3.5.6 (MarcoFalke)
faa7cdf764 scripted-diff: Update copyright in ./test (MarcoFalke)
fa0e65b772 scripted-diff: test: Remove brackets after assert (MarcoFalke)
fab5a1e0f4 build: Require python 3.5 (MarcoFalke)
fa6bf21f5e scripted-diff: test: Use py3.5 bytes::hex() method (MarcoFalke)
Pull request description:
Python 3.4 is EOL after March 2019, so switch to 3.5. See https://devguide.python.org/#status-of-python-branches
This pull does the following in a bunch of commits:
* scripted diff to use the `bytes::hex()` method in place of previous wrappers (`b2x`, `bytes_to_hex_str`, `hexlify`, ...)
* Update the build system (gitian and travis) to remove python2.7 and replace it with python3.5
* Another scripted-diff to remove brackets after `assert`. This is unrelated to the python3.5 switch, but a stylistic commit, so probably not worth to split up. The motivation behind it is to avoid asserting on data structures (such as tuples of length one), which never fails:
```py
>>> assert(False,) # with brackets
>>> assert False, # without brackets
SyntaxError: invalid syntax
>>> assert False # proper assertion
AssertionError
```
* And then a final scripted diff to update the copyright headers in the `test` subfolder, since I touched most of the files anyway and it wouldn't make sense to split this commit out into a separate pull.
For reference (contributed by luke-jr):
Ubuntu LTS (bionic): 3.6.5
Debian stable (stretch): 3.5.3
RHEL 8 (expected before v0.19): 3.6.x
Gentoo stable: 3.6.5
Arch: 3.7.1
Tree-SHA512: 643c28cd2d5b9543ce4bf8ad2a8b282bc79b37dc5b25c9c8358e6ce201e2a67a546463e5f3430b16652eb2489d7c3ed4b0772cd2e2bf790fe68a5e3cc8a25029
In lint-format-strings, we use python argparse to read our file arguments. In
this mode, argparse opens all the files simultaneously. On OS X, where the
default filehandle limit is 128, this causes the lint to fail. Instead, ask
argparse for our filename arguments as strings, and open them one at a time
using 'with open'.
1a7ba84e11 Fix lack of warning of unrecognized section names (Akio Nakamura)
Pull request description:
In #14708, It was introduced that to warn when unrecognized section names are exist in the config file.
But ```m_config_sections.clear()``` in ```ArgsManager::ReadConfigStream()``` is called every time when reading each configuration file, so it can warn about only last reading file if ```includeconf``` exists.
This PR fix lack of warning by collecting all section names by moving ```m_config_sections.clear()``` to ```ArgsManager::ReadConfigFiles()``` .
Also add a test code to confirm this situation.
Tree-SHA512: 26aa0cbe3e4ae2e58cbe73d4492ee5cf465fd4c3e5df2c8ca7e282b627df9e637267af1e3816386b1dc6db2398b31936925ce0e432219fec3a9b3398f01e3e65
07cae5287c [wallet] remove unused GetScriptForMining (Sjors Provoost)
8bb3e4c487 [rpc] remove deprecated generate method (Sjors Provoost)
Pull request description:
As announced in v0.18, the wallet generate rpc method is deprecated and will be fully removed in v0.19.
Clients should transition to using the node rpc method `generatetoaddress`.
Tree-SHA512: 9e5e913b59f3e18440b2b7b356124c7b87ad19f81a1ab6ada06a6c396b84e734895465f569296f1ba8c12abf74863bab5fd77765c9e806c239713aa83a59485f
f13ad1cae0 modify test for memory locked in case locking pages failed at some point (Adam Jonas)
2fa85ebd1c add rpc_misc.py, mv test getmemoryinfo, add test mallocinfo (Adam Jonas)
Pull request description:
Creating the `rpc_misc.py` functional test file to add space for adding tests to a file that doesn't have a lot of coverage.
- Removing the `getmemoryinfo()` smoke test from wallet basic rather than moving it to keep the wallet decoupled. Feel like testing for reasonable memory allocation values should suffice.
- Adding coverage for `mallocinfo()`. Introduced standard lib XML parser since the function exports an XML string that describes the current state of the memory-allocation implementation in the caller.
Tree-SHA512: ced30115622916c88d1e729969ee331272ec9f2881eb36dee4bb7331bf633a6810a57fed63a0cfaf86de698edb5162e6a035efd07c89ece1df56b69d61288072
ca253f6ebf Make deriveaddresses use stop/[start,stop] notation for ranges (Pieter Wuille)
1675b7ce55 Use stop/[start,stop] notation in importmulti desc range (Pieter Wuille)
4566011631 Add support for stop/[start,stop] ranges to scantxoutset (Pieter Wuille)
6b9f45e81b Support ranges arguments in RPC help (Pieter Wuille)
7aa6a8aefb Add ParseRange function to parse args of the form int/[int,int] (Pieter Wuille)
Pull request description:
This introduces a consistent notation for RPC arguments in `scantxoutset`, `importmulti`, and `deriveaddresses`, either:
* `"range" : int` to just specify the end of the range
* `"range" : [int,int]` to specify both the begin and the end of the range.
For `scantxoutset`, this is a backward compatible new feature. For the two other RPCs, it's an incompatible change, but neither of them has been in a release so far. Because of that non-released reason, this only makes sense in 0.18, in my opinion.
I suggest this as an alternative to #15496, which only makes `deriveaddresses` compatible with `importmulti`, but not with the existing `scantxoutset` RPC. I also think `[int,int]` is more convenient than `{"start":int,"stop":int}`.
I realize this is technically a feature added to `scantxoutset` after the feature freeze. If desired, I'll drop the `scantxoutset` changes.
Tree-SHA512: 1cbebb90cf34f106786dbcec7afbf3f43fb8b7e46cc7e6763faf1bc1babf12375a1b3c3cf86ee83c21ed2171d99b5a2f60331850bc613db25538c38b6a056676
This adds explicit tests for the returned HTTP status codes to
interface_rpc.py (for error cases) and the HTTP JSON-RPC client in
general for success.
PR 15381 brought up discussion about the HTTP status codes in general,
and the general opinion was that the current choice may not be ideal
but should not be changed to preserve compatibility with existing
JSON-RPC clients. Thus it makes sense to actually test the current
status to ensure this desired compatibility is not broken accidentally.
ef362f2773 rpc/gui: Remove 'Unknown block versions being mined' warning (Wladimir J. van der Laan)
Pull request description:
Due to miners inserting garbage into the version numbers causing false positives, the current version signalling has become completely useless. This removes the "unknown block versions" warning which has the tendency to scare users unnecessarily (and might get them to "update" to something bad).
It preserves the warning in the logs. Whether this is desirable can be a point of discussion.
Tree-SHA512: 51407ccd24a571462465d9c7180f0f28307c50b82a03284abe783e181d8ab7e0638dbb710698d883f28de8a609db70763e39be2470d956e67c833da0768e43e9
fa2cdc9ac2 test: Simplify create_cache (MarcoFalke)
fa25210d62 qa: Fix wallet_txn_doublespend issue (MarcoFalke)
1111aecbb5 qa: Always refresh stale cache to be out of ibd (MarcoFalke)
fab0d85802 qa: Remove mocktime unless required (MarcoFalke)
Pull request description:
When starting a test, we are always in IBD because the timestamps on cached blocks are in the past. Usually, we solve that by generating a block at the beginning of the test.
That is clumsy and might even lead to other problems such as #15360 and https://github.com/bitcoin/bitcoin/issues/14446#issuecomment-461926598
So fix that by getting rid of mocktime and always refreshing the last block of the cache when starting the test framework.
Should fix#14446
Tree-SHA512: 6af09800f9c86131349a103af617a54551f5f3f3260d38e14e3f30fdd3d91a0feb0100c56cbb12eae4aeac5571ae4b530b16345cbb831d2670237b53351a22c1
Due to miners inserting garbage into the version numbers, the current
version signalling has become completely useless. This removes the
"unknown block versions" warning which has the tendency to scare
users unnecessarily (and might get them to "update" to something
bad).
It preserves the warning in the logs. Whether this is desirable can
be a point of discussion.
fa4ce7038d rpc: Actually throw help when passed invalid number of params (MarcoFalke)
fa05626ca7 rpc: Add RPCHelpMan::IsValidNumArgs() (MarcoFalke)
Pull request description:
Can be tested by
* running the included test against an old binary (compiled without this patch)
* calling `setban 1 "add" 3 4 5 6 7 8 9 0` in the gui
Tree-SHA512: aa6a25bbe6f40722913ea292252a62a4012c964eed9f4035335a2e2d13be98eb60f368e8a3251a104a26a62c08b2cb926b06e5ab1418ef1cf4abdd71d87c2919
3782075a5f Move all PID file stuff to init.cpp (Hennadii Stepanov)
561e375c73 Make PID file creating errors fatal (Hennadii Stepanov)
745a2ace18 Improve PID file removing errors logging (Hennadii Stepanov)
Pull request description:
Digging into #15240 the lack of the proper logging has been discovered.
Fixed by this PR.
UPDATE (inspired by @laanwj's [comment](https://github.com/bitcoin/bitcoin/pull/15278#discussion_r252641810)):
Not being able to create the PID file is fatal now.
Output of `bitcoind`:
```
$ src/bitcoind -pid=/run/bitcoind/bitcoind.pid
2019-02-01T23:20:10Z Bitcoin Core version v0.17.99.0-561e375c7 (release build)
2019-02-01T23:20:10Z Assuming ancestors of block 0000000000000037a8cd3e06cd5edbfe9dd1dbcc5dacab279376ef7cfc2b4c75 have valid signatures.
2019-02-01T23:20:10Z Setting nMinimumChainWork=00000000000000000000000000000000000000000000007dbe94253893cbd463
2019-02-01T23:20:10Z Using the 'sse4(1way),sse41(4way),avx2(8way)' SHA256 implementation
2019-02-01T23:20:10Z Using RdRand as an additional entropy source
2019-02-01T23:20:11Z Error: Unable to create the PID file '/run/bitcoind/bitcoind.pid': No such file or directory
Error: Unable to create the PID file '/run/bitcoind/bitcoind.pid': No such file or directory
2019-02-01T23:20:11Z Shutdown: In progress...
2019-02-01T23:20:11Z Shutdown: Unable to remove PID file: File does not exist
2019-02-01T23:20:11Z Shutdown: done
```
Output of `bitcoin-qt`:
**Notes for reviewers**
1. `CreatePidFile()` has been moved from `util/system.cpp` to `init.cpp` for the following reasons:
- to get the ability to use `InitError()`
- now `init.cpp` contains code of both creating PID file and removing it
2. Regarding 0.18 release process: this PR modifies 1 string and introduces 2 new ones.
Tree-SHA512: ac07d0f800e61ec759e427d0afc0ca43d67f232e977662253963afdd0a220d34b871050f58149fc9fabd427bfc8e0d3f6a6032f2a38f30ad366fc0d074b0f2b3
1a062b85f0 tests: remove byte.hex() to keep compatibility (Akio Nakamura)
Pull request description:
Use ```test_framework.util.bytes_to_hex_str()``` instead of ```bytes.hex()``` that new in Python 3.5 to support minimum version of Python(test).
```test/functional/test_framework/wallet_util.py``` is also reported to have '\.hex()' in #15397,
but it does not matter because it calls CScript.hex() defined in wallet_util.py.
Tree-SHA512: 1019212e965f0848d235fab4da11959dffa42e8adfcd41216c10795cfc63c804b5deb5a3317f25d29940b9dcf088ab76fe3fa80d2679dc19f5f482dc5bde3283
8e4b4f683a Address test todos by removing -txindex to nodes. Originally added when updating getrawtransaction to stop searching unspent utxos. (Amiti Uttarwar)
Pull request description:
Original todos added when removing getrawtransaction default behavior of searching unspent utxos.
Tree-SHA512: d080953c3b0d2e5dca2265a15966dc25985a614c9cc86271ecd6276178ce428c85e262c24df92501695c32fed7beec0339b989f03cce91b57fb2efba201b7809
e3e1a5631e [test] functional: set cwd of nodes to tmpdir (Sjors Provoost)
Pull request description:
Any process launched by bitcoind will have `self.datadir` as its `cwd`.
Tree-SHA512: 0b311643bb96c7dc2f693774620173243b3add40bf373284695af2f0071823b23485289fd2ffe152b7f63e0bfe989b16720077cfc2ce33905f9b8e7f2630f3c0
1. Fix lack of warning by collecting all section names by moving
m_config_sections.clear() to ArgsManager::ReadConfigFiles().
2. Add info(file name, line number) to warning message.
3. Add a test code to confirm this situation.
3. Do clear() in ReadConfigString().
fd637be8d2 Add checksums to descriptors.md (Pieter Wuille)
be62903c41 Make descriptor checksums mandatory in deriveaddresses and importmulti (Pieter Wuille)
b52cb63688 Add getdescriptorinfo to compute checksum (Pieter Wuille)
3b40bff988 Descriptor checksum (Pieter Wuille)
Pull request description:
This adds support for a descriptor-specific 8-character checksum.
Descriptors may optionally be suffixed with a `#` plus these 8 checksum characters. Any descriptor that contains a `#` at the end must be followed by a valid checksum. If the `#` is missing entirely, it is valid without checksum.
All RPCs are updated to report descriptors that include the checksum. On input, they are optional except in `deriveaddress` and `importmulti`, which require descriptors which include a checksum.
A new RPC is also added to analyse descriptors (`getdescriptorinfo`), which can be used to compute the checksum for a descriptor without.
Tree-SHA512: a8294b09155eb6c67fbc178b5e2d3fbc0e9bec8b6de57a13f8835550d51c2cb32a428b3c9a188ded42b454d594e9305edbd4797906b755de77a8f33c79165f6b
540729ef4b Implement analyzepsbt RPC and tests (Andrew Chow)
77542cf2a5 Move PSBT UTXO fetching to a separate method (Andrew Chow)
cb40b3abd4 Figure out what is missing during signing (Andrew Chow)
08f749c914 Implement joinpsbts RPC and tests (Andrew Chow)
7344a7b998 Implement utxoupdatepsbt RPC and tests (Andrew Chow)
Pull request description:
This PR adds 3 new utility RPCs for interacting with PSBTs.
`utxoupdatepsbt` updates a PSBT with UTXO information from the node. It only works with witness UTXOs because full transactions (as would be needed for non-witness UTXOs) are not available unless txindex is enabled.
`joinpsbts` joins the inputs from multiple distinct PSBTs into one PSBT. e.g. if PSBT 1 has inputs 1 and 2, and PSBT 2 has inputs 3 and 4, `joinpsbts` would create a new PSBT with inputs 1, 2, 3, and 4.
`analyzepsbt` analyzes a PSBT and determines the current state of it and all of its inputs, and the next step that needs to be done.
Tree-SHA512: 3c1fa302201abca76a8901d0c2be7b4ccbce334d989533c215f8b3e50e22f2f018ce6209544b26789f58f5980a253c0655111e1e20d47d5656e0414c64891a5c
fa178a6385 [rpc] mining: Omit uninitialized currentblockweight, currentblocktx (MarcoFalke)
Pull request description:
Previously we'd report "0", which could be mistaken for a valid number. E.g. the number of transactions is 0 or the block weight is 0, whatever that means.
Tree-SHA512: ee94ab203a329e272211b726f4c23edec4b09c650ec363b77fd59ad9264165d73064f78ebb9e11b5c2c543b73c157752410a307655560531c7d5444d203aa0ea
When private keys are disabled, still fetch keys from the keypool
if the keypool has keys. Those keys come from importing them and
adding them to the keypool.
cb3511b9d Add release notes for importing key origin info change (Andrew Chow)
4c75a69f3 Test importing descriptors with key origin information (Andrew Chow)
02d6586d7 Import KeyOriginData when importing descriptors (Andrew Chow)
3d235dff5 Implement a function to add KeyOriginInfo to a wallet (Andrew Chow)
eab63bc26 Store key origin info in key metadata (Andrew Chow)
345bff601 Remove hdmasterkeyid (Andrew Chow)
bac8c676a Add a method to CWallet to write just CKeyMetadata (Andrew Chow)
e7652d3f6 Add WriteHDKeypath function and move *HDKeypath to util/bip32.{h,cpp} (Andrew Chow)
c45415f73 Refactor keymetadata writing to a separate method (Andrew Chow)
Pull request description:
This PR allows for key origin data as defined by the descriptors document to be imported to the wallet when importing a descriptor using `importmulti`. This allows the `walletprocesspsbt` to include the BIP 32 derivation paths for keys that it is watching that are from a different HD wallet.
In order to make this easier to use, a new field `hdmasterkeyfingerprint` has been added to `getaddressinfo`. Additionally I have removed `hdmasterkeyid` as was planned. I think that this API change is fine since it was going to be removed in 0.18 anyways. `CKeyMetadata` has also been extended to store key origin info to facilitate this.
Tree-SHA512: 9c7794f3c793da57e23c5abbdc3d58779ee9dea3d53168bb86c0643a4ad5a11a446264961e2f772f35eea645048cb60954ed58050002caee4e43cd9f51215097
fa535af92c fuzz: test_runner: Better error message when built with afl (MarcoFalke)
fa7ca8ef58 qa: Add test/fuzz/test_runner.py (MarcoFalke)
Pull request description:
Can be run with `./test/fuzz/test_runner.py` after building as described in `doc/fuzzing.md`
Tree-SHA512: f6a3cd8165ec2de4b363be4fd0a936b4a60829cce923f93fe5d6a046b1bbd64c959cdf790440bf70c0e13b0bb1b956a746a24c6fd92bddeab15b837ed50ffad2
6ca836ab3a Add release note for listunspent P2WSH change (MeshCollider)
928beae007 Add test for P2SH-P2WSH in signrawtransactionwithkey and listunspent (MeshCollider)
314784a60f Make listunspent and signrawtransaction RPCs support witnessScript (MeshCollider)
Pull request description:
This is a reworked version of #11708 after #12427 and the `signrawtransaction` split.
For a P2WSH address, listunspent should return the witness script, and for a P2SH-P2WSH address, it should also return the inner witness script (because SignTransaction will automatically wrap it in P2SH if required).
Includes a test which also tests the behaviour of #12427, and release note.
Tree-SHA512: a8e72cf16930312bf48ec47e44a68f8d7e26664043c1b4cc0983eb25aec4087e511188ff9a0f181cd7b8a0c068c60d7f1e7e3f226b79e8c48890039dcf57f7b7
102faad81 Factor out combine / finalize / extract PSBT helpers (Glenn Willen)
78b9893d0 Remove op== on PSBTs; check compatibility in Merge (Glenn Willen)
bd0dbe876 Switch away from exceptions in refactored tx code (Glenn Willen)
c6c3d42a7 Move PSBT definitions and code to separate files (Glenn Willen)
81cd95884 Factor BroadcastTransaction out of sendrawtransaction (Glenn Willen)
c734aaa15 Split DecodePSBT into Base64 and Raw versions (Glenn Willen)
162ffefd2 Add pf_invalid arg to std::string DecodeBase{32,64} (Glenn Willen)
Pull request description:
* Move most PSBT definitions into psbt.h.
* Move most PSBT RPC utilities into psbt.{h,cpp}.
* Move wallet-touching PSBT RPC utilities (FillPSBT) into
wallet/psbtwallet.{h,cpp}.
* Switch exceptions from JSONRPCError() to new PSBTException class.
* Split DecodePSBT into DecodeBase64PSBT (old behavior) and DecodeRawPSBT.
* Add one new version of DecodeBase64 utility in strencodings.h (and
corresponding DecodeBase32 for completeness).
* Factor BroadcastTransaction utility function out of sendrawtransaction RPC
handler in rpc/rawtransaction.cpp
Note: For those keeping score at home wondering why refactor, this is in anticipation of (and developed in parallel with) a change to actually introduce GUI use of all this stuff, which is already under development and working-ish.
Tree-SHA512: 2197c448e657421f430943025357597e7b06c4c377d5d4b2622b9edea52a7193c48843dd731abb3a88ac4023a9c88d211991e0a9b740c22f2e1cbe72adefe390
b651ef7e1c submitheader: more directly test missing prev block header (Gregory Sanders)
1e7f741745 remove some magic mining constants in functional tests (Gregory Sanders)
Pull request description:
The fewer magic numbers the better.
Also more directly tested a `submitheader` case of bad previous blockhash.
Tree-SHA512: 52b01a6aa199fa909eea4e9e84409a901933e545724e33149cc4132c82168199fd678809b6d94d95c9ff6ad02238a9552363620d13b8beaa5d4b67ade9ef425c
