c133cdcdc3 Cap listsinceblock target_confirmations param (Adam Stein)
Pull request description:
This addresses an issue brought up in #19587.
Currently, the `target_confirmations` parameter to `listsinceblock` is not checked for being too large. When `target_confirmations` is greater than one more than the current number of blocks, `listsinceblock` fails with error code -1. In comparison, when `target_confirmations` is less than 1, a -8 "Invalid parameter" error code is thrown.
This PR fixes the issue by returning a -8 "Invalid parameter" error if the `target_confirmations` value corresponds to a block with more confirmations than the genesis block. This happens if `target_confirmations` exceeds one more than the number of blocks.
ACKs for top commit:
laanwj:
Code review ACK c133cdcdc3
ryanofsky:
Code review ACK c133cdcdc3. Just suggested changes since last review. Thanks!
Tree-SHA512: 02680f4cb937d2c24d5019abd0ebfa188b8a50679a1e64e9c26bfe5c17eef6aea906832e6e2d492ba8a2ea160041bf185d66795ee691e340f6793db03c21b89a
79d6332e9e moveonly: Fix indentation in bumpfee RPC (Andrew Chow)
431071c28a Hide bumpfee's psbt creation behavior behind -deprecatedrpc (Andrew Chow)
4638224f64 Add psbtbumpfee RPC (Andrew Chow)
Pull request description:
Adds a new RPC `psbtbumpfee` which always creates a psbt. `bumpfee` will then only be able to create and broadcast fee bumping transactions instead of changing its behavior based on `IsWalletSet(WALLET_FLAG_DISABLE_PRIVATE_KEYS)`.
Split from #18627
ACKs for top commit:
Sjors:
re-utACK 79d6332
meshcollider:
utACK 79d6332e9e
fjahr:
Code review ACK 79d6332e9e
Tree-SHA512: 1c92c4b4461bb30e78be3ee73165f624398ef33996ce36043b61a8931be667030d0fca12fd0b30097b78c56e4e9092c69582b237cbdac51d56f6be23d8c0f1bb
Previously, listsinceblock would fail with error code -1 when the
target_confirmations exceeded the number of confirmations of the genesis
block. This commit allows target_confirmations to refer to a lastblock
hash with more confirmations than exist in the chain by setting the
lastblock hash to the genesis hash in this case. This allows for
`listsinceblock "" 6` to not fail if the block count is less than 5
which may happen on regtest.
Includes update to the functional test for listsinceblock to test for
this case.
Most of the test time is spent in wait_for_invs() after sending to addresses,
i.e. the bottleneck is in relaying transactions. By whitelisting the peers via
-whitelist, the inventory is transmissioned immediately rather than on average
every 5 seconds, speeding up the test significantly:
before:
$ time ./p2p_feefilter.py
...
real 0m39.367s
user 0m1.227s
sys 0m0.571s
with this commit:
$ time ./p2p_feefilter.py
...
real 0m9.386s
user 0m1.120s
sys 0m0.577s
a51d0ad2de rpc: Improve addnode remove command error message (Fabian Jahr)
Pull request description:
The `addnode` RPC with the `remove` command parameter is used to remove a node from the "added nodes". It did not have test coverage and in case of failure to remove the node it responded with the confusing message "Error: Node has not been added.".
This PR adds test coverage and introduces a new error code as well as changes the error message to something that makes sense.
ACKs for top commit:
laanwj:
Code review ACK a51d0ad2de
theStack:
Tested ACK https://github.com/bitcoin/bitcoin/commit/a51d0ad2de
Tree-SHA512: 033ef5de0d4d49d58ef4df3759b838c9d19ee9dfb0aff9f814a3a63d124ca231a442c930efa7d343fe1f65727c4b59fc23dd5e26fe6ea69f9e84fda48b5c5cc2
37a480e0cd [net] Add addpeeraddress RPC method (John Newbery)
ae8051bbd8 [test] Test that getnodeaddresses() can return all known addresses (John Newbery)
f26502e9fc [addrman] Specify max addresses and pct when calling GetAddresses() (John Newbery)
Pull request description:
Currently addrman only allows a maximum of 1000 records or 23% of all records to be returned in a call to `GetAddr()`. Relax this limit and have the client specify the max records they want. For p2p, behaviour is unchanged (but the rate limiting is set inside net_processing, where it belongs). For RPC, `getnodeaddresses` can now return the complete addrman, which is helpful for testing and monitoring.
Also add a test-only RPC `addpeeraddress`, which adds an IP address:port to addrman. This is helpful for testing (eg #18991).
ACKs for top commit:
naumenkogs:
utACK 37a480e0cd
laanwj:
Code review and lightly manually tested ACK 37a480e0cd
Tree-SHA512: f86dcd410aaebaf6e9ca18ce6f23556e5e4649c1325577213d873aa09967298e65ab2dc19a72670641ae92211a923afda1fe124a82e9d2c1cad73d478ef27fdc
dac7a111bd refactor: test: use _ variable for unused loop counters (Sebastian Falbesoner)
Pull request description:
This tiny PR substitutes Python loops in the form of `for x in range(N): ...` by `for _ in range(N): ...` where applicable. The idea is indicating to the reader that a block (or statement, in list comprehensions) is just repeated N times, and that the loop counter is not used in the body, hence using the throwaway variable. This is already done quite often in the current tests (see e.g. `$ git grep "for _ in range("`). Another alternative would be using `itertools.repeat` (according to Python core developer Raymond Hettinger it's [even faster](https://twitter.com/raymondh/status/1144527183341375488)), but that doesn't seem to be widespread in use and I'm not sure about a readability increase.
The only drawback I see is that whenever one wants to debug loop iterations, one would need to introduce a loop variable again. Reviewing this is basically a no-brainer, since tests would fail immediately if a a substitution has taken place on a loop where the variable is used.
Instances to replace were found by `$ git grep "for.*in range("` and manually checked.
ACKs for top commit:
darosior:
ACK dac7a111bd
instagibbs:
manual inspection ACK dac7a111bd
practicalswift:
ACK dac7a111bd -- the updated code is easier to reason about since the throwaway nature of a variable is expressed explicitly (using the Pythonic `_` idiom) instead of implicitly. Explicit is better than implicit was we all know by now :)
Tree-SHA512: 5f43ded9ce14e5e00b3876ec445b90acda1842f813149ae7bafa93f3ac3d510bb778e2c701187fd2c73585e6b87797bb2d2987139bd1a9ba7d58775a59392406
9e165d0de4 test: Wait for 'cmpctblock' in p2p_compactblocks when it is expected (Ben Woosley)
Pull request description:
This is a more narrowly-construed wait which eliminates the possibility of the
wait being triggered by other messages.
Note `received_block_announcement` reflect three possible messages:
edec7f7c25/test/functional/p2p_compactblocks.py (L34-L53)
Prompted by looking into: #19449
ACKs for top commit:
laanwj:
Code review ACK 9e165d0de4
theStack:
ACK 9e165d0de4
Tree-SHA512: bc4a9c8bf031c8a7efb40d9625feaa3fd1f56f3b75da7034944af71ccea44328a6c708ab0c13fea85fb7cf4fd9043fe90eb94a25e95b2d42be44c2962b4904ce
fa4dfd215f test: Wait until is_connected in add_p2p_connection (MarcoFalke)
Pull request description:
Moving the wait_until from the individual test scripts to the test framework simplifies two tests
ACKs for top commit:
jnewbery:
Code review ACK fa4dfd215f
theStack:
ACK fa4dfd215f☕
Tree-SHA512: 36eda7eb323614a4c4f9215f1d7b40b9f9c4036d1c08eb701ea705f3e2986fdabd2fc558965a6aadabeed861034aeaeef3c00f968ca17ed7a27e42e506cda87d
566aada386 Test that wtxid relay peers add wtxid to reject filter (Gregory Sanders)
0fea6ede1b Restore test case for p2p transaction blinding (Gregory Sanders)
Pull request description:
Introduced in ca10a03add then erroneously removed in 8d8099e97a. The restored line is how we are
checking that the node will still re-request a specific txid given a witness-related failure.
ACKs for top commit:
fjahr:
tACK 566aada386
Tree-SHA512: be2b75b5eddb88019b79cc798f9922ca7347ccbb2210b8d4eae93fdde62e2cbb614b5247cb2fbd7ee3577dbe053875a9b62c5747aace8617f12790b8fccdeab4
9f88ded82b test addition of unknown segwit spends to txid reject filter (Gregory Sanders)
7989901c7e Add txids with non-standard inputs to reject filter (Suhas Daftuar)
Pull request description:
Our policy checks for non-standard inputs depend only on the non-witness
portion of a transaction: we look up the scriptPubKey of the input being
spent from our UTXO set (which is covered by the input txid), and the p2sh
checks only rely on the scriptSig portion of the input.
Consequently it's safe to add txids of transactions that fail these checks to
the reject filter, as the witness is irrelevant to the failure. This is helpful
for any situation where we might request the transaction again via txid (either
from txid-relay peers, or if we might fetch the transaction via txid due to
parent-fetching of orphans).
Further, in preparation for future witness versions being deployed on the
network, ensure that WITNESS_UNKNOWN transactions are rejected in
AreInputsStandard(), so that transactions spending v1 (or greater) witness
outputs will fall into this category of having their txid added to the reject
filter.
ACKs for top commit:
ajtowns:
ACK 9f88ded82b - code review
jnewbery:
Code review ACK 9f88ded82b
ariard:
Code Review/Tested ACK 9f88ded
naumenkogs:
utACK 9f88ded82b
jonatack:
ACK 9f88ded82b
Tree-SHA512: 1e93c0a5b68cb432524780ffc0093db893911fdfed9e2ed17f888e59114cc75d2a07062aefad4e5ce2e87c9270886117a8abb3c78fb889c9b9f31967f1777148
substitutes "for x in range(N):" by "for _ in range(N):"
indicates to the reader that a block is just repeated N times, and
that the loop counter is not used in the body
82fc4017b7 test: Catch decimal.InvalidOperation from TestNodeCLI#send_cli (Ben Woosley)
Pull request description:
`decimal.InvalidOperation` is a special case of a float parsing error, which
presumably should be handled in the same way as a general parsing error,
rather than blow up.
Alternatives include: logging the error, or re-raising with more information.
Example log output:
```
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 603, in sync_all
self.sync_blocks(nodes)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in sync_blocks
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in <listcomp>
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 571, in __call__
return self.cli.send_cli(self.command, *args, **kwargs)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 639, in send_cli
return json.loads(cli_stdout, parse_float=decimal.Decimal)
File "/usr/lib64/python3.6/json/__init__.py", line 367, in loads
return cls(**kw).decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 355, in raw_decode
obj, end = self.scan_once(s, idx)
decimal.InvalidOperation: [<class 'decimal.InvalidOperation'>]
```
See: https://travis-ci.org/github/bitcoin/bitcoin/jobs/713502326
ACKs for top commit:
laanwj:
ACK 82fc4017b7
Tree-SHA512: 8c102b8bf831b05c5ca4b2e1feb5574dcbaed8cab0b2f22b013c5dfcb81788a38839a163dd1e2c6470ccbe5874214663b84485f45467738fd850ca38d539ae25
faa9a74c9e test: Fail wait_until early if connection is lost (MarcoFalke)
Pull request description:
Calling `minonode.wait_until` needs a connection to make progress (e.g. waiting for an inv), unless the mininode waits for the initial connection or for a disconnection. So for test development and failure debugging, fail early in all `wait_until`, unless opted out.
ACKs for top commit:
jnewbery:
Code review ACK faa9a74c9e.
Tree-SHA512: 4be850b96e23b87bc2ff42c028a5045d6f5cdbc9482ce6a6ba01cc5eb26710dab9e2ed547c363aac4bd5825151ee9996fb797261420b631bceeddbfa698d1dec
3bd67ba5a4 Test addr response caching (Gleb Naumenko)
cf1569e074 Add addr permission flag enabling non-cached addr sharing (Gleb Naumenko)
acd6135b43 Cache responses to addr requests (Gleb Naumenko)
7cc0e8101f Remove useless 2500 limit on AddrMan queries (Gleb Naumenko)
ded742bc5b Move filtering banned addrs inside GetAddresses() (Gleb Naumenko)
Pull request description:
This is a very simple code change with a big p2p privacy benefit.
It’s currently trivial to scrape any reachable node’s AddrMan (a database of all nodes known to them along with the timestamps).
We do have a limit of one GETADDR per connection, but a spy can disconnect and reconnect even from the same IP, and send GETADDR again and again.
Since we respond with 1,000 random records at most, depending on the AddrMan size it takes probably up to 100 requests for an spy to make sure they scraped (almost) everything.
I even have a script for that. It is totally doable within couple minutes.
Then, with some extra protocol knowledge a spy can infer the direct peers of the victim, and other topological stuff.
I suggest to cache responses to GETADDR on a daily basis, so that an attacker gets at most 1,000 records per day, and can’t track the changes in real time. I will be following up with more improvements to addr relay privacy, but this one alone is a very effective. And simple!
I doubt any of the real software does *reconnect to get new addrs from a given peer*, so we shouldn’t be cutting anyone.
I also believe it doesn’t have any negative implications on the overall topology quality. And the records being “outdated” for at most a day doesn’t break any honest assumptions either.
ACKs for top commit:
jnewbery:
reACK 3bd67ba5a4
promag:
Code review ACK 3bd67ba5a4.
ariard:
Code Review ACK 3bd67ba
Tree-SHA512: dfa5d03205c2424e40a3f8a41af9306227e1ca18beead3b3dda44aa2a082175bb1c6d929dbc7ea8e48e01aed0d50f0d54491caa1147471a2b72a46c3ca06b66f
Introduced in ca10a03add then erroneously removed in
8d8099e97a. The restored line is how we are
checking that the node will still re-request a specific txid given a witness-related failure.
decimal.InvalidOperation is a special case of a float parsing error, which
presumably should be handled in the same way as a general parsing error,
rather than blow up.
Alternatives include: logging the error, or re-raising with more information.
Example log output:
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 603, in sync_all
self.sync_blocks(nodes)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in sync_blocks
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_framework.py", line 568, in <listcomp>
best_hash = [x.getbestblockhash() for x in rpc_connections]
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 571, in __call__
return self.cli.send_cli(self.command, *args, **kwargs)
File "/home/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-i686-pc-linux-gnu/test/functional/test_framework/test_node.py", line 639, in send_cli
return json.loads(cli_stdout, parse_float=decimal.Decimal)
File "/usr/lib64/python3.6/json/__init__.py", line 367, in loads
return cls(**kw).decode(s)
File "/usr/lib64/python3.6/json/decoder.py", line 339, in decode
obj, end = self.raw_decode(s, idx=_w(s, 0).end())
File "/usr/lib64/python3.6/json/decoder.py", line 355, in raw_decode
obj, end = self.scan_once(s, idx)
decimal.InvalidOperation: [<class 'decimal.InvalidOperation'>]
This is a more narrowly-construed wait which eliminates the possibility of the
wait being triggered by other messages.
Co-authored-by: Billy Garrison <billygarrison.btc@gmail.com>
82dee87933 test: test decodepsbt fee calculation (count input value only once per UTXO) (Sebastian Falbesoner)
Pull request description:
Fixes#19523, adding a simple test to `rpc_psbt.py` that checks that the decodepsbt fee matches the one given by the wallet (`walletcreatefundedpsbt`). This is in particular important for PSBTs with segwit inputs that have both a witness- and a non-witness-UTXO type set.
Example test run after reverting commit 75122780e2 ("Increment input value sum only once per UTXO in decodepsbt"):
```
$ test/functional/rpc_psbt.py
2020-07-26T11:31:44.862000Z TestFramework (INFO): Initializing test directory /tmp/bitcoin_func_test__sutcd4y
20.00007580
2020-07-26T11:31:47.073000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/home/honeybadger/buidl/bitcoin_thestack/test/functional/test_framework/test_framework.py", line 118, in main
self.run_test()
File "test/functional/rpc_psbt.py", line 166, in run_test
assert_equal(decoded['fee'], created_psbt['fee'])
File "/home/honeybadger/buidl/bitcoin_thestack/test/functional/test_framework/util.py", line 49, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(20.00007580 == 0.00007580)
2020-07-26T11:31:47.125000Z TestFramework (INFO): Stopping nodes
......
```
ACKs for top commit:
achow101:
ACK 82dee87933
Tree-SHA512: 296b8a701f851d482ef6200c6cbf0cf0257a79a828ac6dbc39b05d8c2d839c6fdb9d3f5a084015295cfa3eac7c11faa2f2d52e619c11627b04c75150eead8330
2c6a02e024 Clean message_count and last_message (Troy Giorshev)
Pull request description:
From #19580
This PR changes comments to clarify the intended usage of `message_count` and `last_message`. Additionally it changes the only usage of `message_count` to use `last_message` instead, bringing the code into alignment with the intended usage.
Note: Now `message_count` is completely unused. However, it is ready to be used (i.e. the supporting code works) and likely will be used in some test in the future.
ACKs for top commit:
jnewbery:
utACK 2c6a02e024
Tree-SHA512: 07c7684c9586de4f845e10d7aac36c1aab9fb56b409949c1c70d5ca705bc3971ca7d5943245a0472def4efd7b4e1c5dad2f713db5ead8fca08404daf4891e98b
74507ce71e walletdb: Remove BerkeleyBatch friend class from BerkeleyDatabase (Andrew Chow)
00f0041351 No need to check for duplicate fileids in all dbenvs (Andrew Chow)
d86efab370 walletdb: Move Db->open to BerkeleyDatabase::Open (Andrew Chow)
4fe4b3bf1b walletdb: track database file use as m_refcount within BerkeleyDatabase (Andrew Chow)
65fb8807ac Combine BerkeleyEnvironment::Verify into BerkeleyDatabase::Verify (Andrew Chow)
Pull request description:
`BerkeleyBatch` and `BerkeleyDatabase` are kind of messy. The goal of this is to clean up them up so that they are logically separated.
`BerkeleyBatch` currently handles the creation of the `BerkeleyDatabase`'s `Db` handle. This is instead moved into `BerkeleyDatabase` and is called by `BerkeleyBatch`.
Instead of having `BerkeleyEnvironment` track each database's usage, have `BerkeleyDatabase` track this usage itself with the `m_refcount` variable that is present in `WalletDatabase`.
Lastly, instead of having each `BerkeleyEnvironment` store the fileids of the databases open in it, have a global `g_fileids` to track those fileids. We were already checking fileid uniqueness globally (by checking the fileids in every environment when opening a database) so it's cleaner to do this with a global variable.
All of these changes allow us to make `BerkeleyBatch` and `BerkeleyDatabase` no longer be friend classes.
The diff of this PR is currently the same as in ##18971
Requires #19334
ACKs for top commit:
laanwj:
Code review ACK 74507ce71e
ryanofsky:
Code review ACK 74507ce71e. No changes since last review other than rebase
Tree-SHA512: 845d84ee1a470e2bf5d2e2e3d7738183d8ce43ddd06a0bbd57edecf5779b2f55d70728b1b57f5daab0f078650a8d60c3e19dc30b75b36e7aa952ce268399d5f6
This commit clarifies the intended usage of message_count and
last_message. Additionally it changes the only usage of message_count
to using last_message instead, bringing the code further along the
intended usage.
Checks that the RPC decodepsbt calculates the fee correctly, in particular for
PSBTs with segwit inputs that have both a witness- and a non-witness-UTXO type
set. Before commit 75122780e2 ("Increment input
value sum only once per UTXO in decodepsbt") the values for those inputs were
double counted.
9c69cfe4c5 Add <datadir>/settings.json persistent settings storage. (Russell Yanofsky)
eb682c5700 util: Add ReadSettings and WriteSettings functions (Russell Yanofsky)
Pull request description:
Persistent settings are used in followup PRs #15936 to unify gui settings between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to the loadwallet RPC and maintain a dynamic list of wallets that should be loaded on startup that also can be shared between bitcoind and bitcoin-qt.
ACKs for top commit:
MarcoFalke:
Approach re-ACK 9c69cfe4c5🌾
jnewbery:
utACK 9c69cfe4c5
Tree-SHA512: 39fcc6051717117c9141e934de1d0d3f739484be4685cdf97d54de967c8c816502b4fd0de12114433beaa5c5b7060c810fd8ae4e2b3ce7c371eb729ac01ba2e1
2aac093a3d test: Add test coverage for -networkactive option (Hennadii Stepanov)
3c58129b12 net: Log network activity status change unconditionally (Hennadii Stepanov)
62fe6aa87e net: Add -networkactive option (Hennadii Stepanov)
Pull request description:
Some Bitcoin Core activity is completely local (offline), e.g., reindexing.
The `setnetworkactive` RPC command is already present. This PR adds the corresponding command-line argument / config option, and allows to start the client with disabled p2p network by providing `-networkactive=0` or `-nonetworkactive`.
This was done while reviewing #16981.
ACKs for top commit:
MarcoFalke:
re-ACK 2aac093a3d🏠
LarryRuane:
ACK 2aac093a3d
Tree-SHA512: 446d791b46d7b556d7694df7b1f88cd4fbc09301fe4eaf036b45cb8166ed806156353cc03788a07b633d5887d5eee30a7c02a2d4307141c8ccc75e0a88145636
0a4f1422cd Further improve comments around recentRejects (Suhas Daftuar)
0e20cfedb7 Disconnect peers sending wtxidrelay message after VERACK (Suhas Daftuar)
cacd85209e test: Use wtxid relay generally in functional tests (Fabian Jahr)
8d8099e97a test: Add tests for wtxid tx relay in segwit test (Fabian Jahr)
9a5392fdf6 test: Update test framework p2p protocol version to 70016 (Fabian Jahr)
dd78d1d641 Rename AddInventoryKnown() to AddKnownTx() (Suhas Daftuar)
4eb515574e Make TX_WITNESS_STRIPPED its own rejection reason (Suhas Daftuar)
97141ca442 Delay getdata requests from peers using txid-based relay (Suhas Daftuar)
46d78d47de Add p2p message "wtxidrelay" (Suhas Daftuar)
2d282e0cba ignore non-wtxidrelay compliant invs (Anthony Towns)
ac88e2eb61 Add support for tx-relay via wtxid (Suhas Daftuar)
8e68fc246d Add wtxids to recentRejects instead of txids (Suhas Daftuar)
144c385820 Add wtxids of confirmed transactions to bloom filter (Suhas Daftuar)
85c78d54af Add wtxid-index to orphan map (Suhas Daftuar)
08b39955ec Add a wtxid-index to mapRelay (Suhas Daftuar)
60f0acda71 Just pass a hash to AddInventoryKnown (Suhas Daftuar)
c7eb6b4f1f Add wtxid to mempool unbroadcast tracking (Amiti Uttarwar)
2b4b90aa8f Add a wtxid-index to the mempool (Suhas Daftuar)
Pull request description:
Using txids (a transaction's hash, without witness) for transaction relay is problematic, post-segwit -- if a peer gives us a segwit transaction that fails policy checks, it could be because the txid associated with the transaction is definitely unacceptable to our node (regardless of the witness), or it could be that the transaction was malleated and with a different witness, the txid could be accepted to our mempool.
We have a bloom filter of recently rejected transactions, whose purpose is to help us avoid redownloading and revalidating transactions that fail to be accepted, but because of this potential for witness malleability to interfere with relay of valid transactions, we do not use the filter for segwit transactions. This issue is discussed at some length in #8279. The effect of this is that whenever a segwit transaction that fails policy checks is relayed, a node would download that transaction from every peer announcing it, because it has no way presently to cache failure. Historically this hasn't been a big problem, but if/when policy for accepting segwit transactions were to change (eg taproot, or any other change), we could expect older nodes talking to newer nodes to be wasting bandwidth because of this.
As discussed in that issue, switching to wtxid-based relay solves this problem -- by using an identifier for a transaction that commits to all the data in our relay protocol, we can be certain if a transaction that a peer is announcing is one that we've already tried to process, or if it's something new. This PR introduces support for wtxid-based relay with peers that support it (and remains backwards compatible with peers that use txids for relay, of course).
Apart from code correctness, one issue to be aware of is that by downloading from old and new peers alike, we should expect there to be some bandwidth wasted, because sometimes we might download the same transaction via txid-relay as well as wtxid-relay. The last commit in this PR implements a heuristic I want to analyze, which is to just delay relay from txid-relay peers by 2 seconds, if we have at least 1 wtxid-based peer. I've just started running a couple nodes with this heuristic so I can measure how well it works, but I'm open to other ideas for minimizing that issue. In the long run, I think this will be essentially a non-issue, so I don't think it's too big a concern, we just need to bite the bullet and deal with it during upgrade.
Finally, this proposal would need a simple BIP describing the changes, which I haven't yet drafted. However, review and testing of this code in the interim would be welcome.
To do items:
- [x] Write BIP explaining the spec here (1 new p2p message for negotiating wtxid-based relay, along with a new INV type)
- [ ] Measure and evaluate a heuristic for minimizing how often a node downloads the same transaction twice, when connected to old and new nodes.
ACKs for top commit:
naumenkogs:
utACK 0a4f1422cd
laanwj:
utACK 0a4f1422cd
Tree-SHA512: d8eb8f0688cf0cbe9507bf738e143edab1f595551fdfeddc2b6734686ea26e7f156b6bfde38bad8bbbe8bec1857c7223e1687f8f018de7463dde8ecaa8f450df
12410b1feb test: fix intermittent p2p_ibd_txrelay race, add test_framework.py#wait_until (Jon Atack)
Pull request description:
To fix these intermittent failures in Travis CI.
```
162/163 - p2p_ibd_txrelay.py failed, Duration: 2 s
stdout:
2020-07-19T05:44:17.213000Z TestFramework (INFO):
Check that nodes set minfilter to MAX_MONEY while still in IBD
2020-07-19T05:44:17.216000Z TestFramework (ERROR): Assertion failed
Traceback (most recent call last):
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/test_framework/test_framework.py", line 117, in main
self.run_test()
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/p2p_ibd_txrelay.py", line 30, in run_test
assert_equal(conn_info['minfeefilter'], MAX_FEE_FILTER)
File "/Users/travis/build/bitcoin/bitcoin/ci/scratch/build/bitcoin-x86_64-apple-darwin16/test/functional/test_framework/util.py", line 49, in assert_equal
raise AssertionError("not(%s)" % " == ".join(str(arg) for arg in (thing1, thing2) + args))
AssertionError: not(0E-8 == 0.09170997)
2020-07-19T05:44:17.293000Z TestFramework (INFO): Stopping nodes
```
At Marco's suggestion, cherry-picked part of #19134 to nicely simplify using `wait_until`.
ACKs for top commit:
vasild:
ACK 12410b1fe
Tree-SHA512: 615f509883682fd693e578b259cba35a9fa0bc519f1394e88c857e8b0650bfec5397bfa856cfa9e6d5ef81d0ee6ad02e4ad2b0eb0bd530b4c281cbe3e663790b
Using both txid and wtxid-based relay with peers means that we could sometimes
download the same transaction twice, if announced via two different hashes from
different peers.
Use a heuristic of delaying txid-peer-getdata requests by 2 seconds, if we have
at least one wtxid-based peer.
This adds a field to CNodeState that tracks whether to relay transactions with
that peer via wtxid, instead of txid. As of this commit the field will always
be false, but in a later commit we will add a way to negotiate turning this on
via p2p messages exchanged with the peer.
cb31ee01b4 [test] feefilter during and after IBD (gzhao408)
Pull request description:
This is a followup to #19204 which uses `minfeefilter=MAX_MONEY` to effectively shut off txrelay, thereby reducing inv traffic, when nodes are in IBD. It was [missing](https://github.com/bitcoin/bitcoin/pull/19204#issuecomment-644040070) a functional test.
ACKs for top commit:
jnewbery:
utACK cb31ee01b4
Tree-SHA512: a9effc8193fa95fb42a2f9c66b258cc7b0941fc04c1ce3a6092f4426c9bfc7e72f702aca559b3e30e90652497f411f22fae3cf5cdb6cfd6ef6d37fed712cda67
e80259f197 Additionally treat Tx.nVersion as unsigned in joinpsbts (Matt Corallo)
970de70bdd Dump transaction version as an unsigned integer in RPC/TxToUniv (Matt Corallo)
Pull request description:
Consensus-wise we already treat it as an unsigned integer (the
only rules around it are in CSV/locktime handling), but changing
the underlying data type means touching consensus code for a
simple cleanup change, which isn't really worth it.
See-also, https://github.com/rust-bitcoin/rust-bitcoin/pull/299
ACKs for top commit:
sipa:
ACK e80259f197
practicalswift:
ACK e80259f197
ajtowns:
ACK e80259f197 code review -- checked all other uses of tx.nVersion treat it as unsigned (except for policy.cpp:IsStandard anyway), so looks good.
naumenkogs:
ACK e80259f
Tree-SHA512: 6760a2c77e24e9e1f79a336ca925f9bbca3a827ce02003c71d7f214b82ed3dea13fa7d9f87df9b9445cd58dff8b44a15571d821c876f22f8e5a372a014c9976b
fa108d6a75 test: update tests for peer discouragement (Jon Atack)
1a9f462caa gui, doc: rm Ban Score in GUI Peers window/release notes updates (Jon Atack)
Pull request description:
This is the third `-banscore` PR in the mini-series described in #19464. See that PR for the intention and reasoning.
- no longer display "Ban Score" in the GUI peers window and add a release note, plus release note fixups per https://github.com/bitcoin/bitcoin/pull/19464#pullrequestreview-447452052
- update tests (`src/test/denialofservice_tests.cpp` and `test/functional/p2p_leak.py`) from banning to discouragement and per https://github.com/bitcoin/bitcoin/pull/19464#issuecomment-658052518
ACKs for top commit:
jnewbery:
ACK fa108d6a75
laanwj:
ACK fa108d6a75
Tree-SHA512: 58a449b3f47b8cb5490b34e4442ee8675bfad1ce48af4e4fd5c67715b0c1a596fb8e731d42e576b4c3b64627f76e0a68cbb1da9ea9f588a5932fe119baf40d50
7bb6f9bfdb [protocol] Remove unused GETHEADERS_VERSION (John Newbery)
37a934e6b3 [protocol] Remove unused CADDR_TIME_VERSION (John Newbery)
Pull request description:
These constants are no longer required and can be removed.
Additional code comments are added to explain CAddress serialization.
ACKs for top commit:
MarcoFalke:
ACK 7bb6f9bfdb already an improvement, but maybe getting rid of INIT_PROTO_VERSION here would be an even stronger improvement (can be done later)
jonatack:
ACK 7bb6f9bfdb
vasild:
ACK 7bb6f9bf
Tree-SHA512: 5382562c60fd677c86583754eca11aad3719064efe2e5ef4f307d693b583422ca8d385926c2582aaab899f502b151f2eb87a7ac23363b15f4fceaa06296f98e3
08fc6f6cfc [rpc] refactor: consolidate sendmany and sendtoaddress code (Sjors Provoost)
Pull request description:
I consolidated code between these two RPC calls, since `sendtoaddress` is essentially `sendmany` with 1 destination.
Unless I overlooked something, the only behaviour change is that some `sendtoaddress` error codes changed from `-4` to `-6`. The release note mentions this.
Salvaged from #18201.
ACKs for top commit:
fjahr:
Code review ACK 08fc6f6cfc
jonatack:
ACK 08fc6f6cfc
meshcollider:
Code review & functional test run ACK 08fc6f6cfc
Tree-SHA512: 7b66c52fa0444a4d02fc3f81d9c2a386794d447616026a30111eda35fb46510475eea6506a9ceda00bb4e0230ebb758da5d236b3ac05c954c044fa68a1e3e909
a66a7a1a70 walletdb: don't reinitialize desc cache with multiple cache entries (Andrew Chow)
Pull request description:
When loading descriptor caches, we would accidentally reinitialize the descriptor cache when seeing that one already exists. This should have only been initializing the cache when one does not exist. However this code itself is unnecessary as the act of looking up the cache to add to it will initialize it if it didn't already exist.
This issue could be hit by trying to load a wallet that had imported a multisig descriptor. The wallet would fail to load.
A test has been added to wallet_importdescriptors.py to catch this case. Another test case has also been added to check that loading a wallet with only single key descriptors works.
ACKs for top commit:
hugohn:
tACK [a66a7a1](a66a7a1a70)
jonatack:
ACK a66a7a1a70
meshcollider:
Code review ACK a66a7a1a70
Tree-SHA512: 3df746421a008708eaa3bbbdd12b9ddd3e2ec111d54625a212dca7414b971cc1f6e2b1757b3232c31a2f637d1b1ef43bf3ffa4ac4216646cf1e92db5f79954f1
fa73493930 refactor: Use C++11 range-based for loop (MarcoFalke)
fa7b164d62 wallet: Never schedule MaybeCompactWalletDB when -flushwallet is off (MarcoFalke)
faf8401c19 wallet: Pass unused args to StartWallets (MarcoFalke)
fa6c186436 gui tests: Limit life-time of dummy testing setup (MarcoFalke)
fa28a61897 test: Add smoke test to check that wallets are flushed by default (MarcoFalke)
Pull request description:
User-facing, this is a refactor. Internally, the scheduler does not have to call a mostly empty function every half a second.
ACKs for top commit:
jnewbery:
utACK fa73493930
meshcollider:
utACK fa73493930
ryanofsky:
Code review ACK fa73493930. Just rebased since last review
Tree-SHA512: 99e1fe1b2c22a3f4b19de3e566241d38693f4fd8d5a68ba1838d86740aa6c08e3325c11a072e30fd262a8861af4278bed52eb9374c85179b8f536477f528247c
Persistent settings are used in followup PRs #15936 to unify gui settings
between bitcoin-qt and bitcoind, and #15937 to add a load_on_startup flag to
the loadwallet RPC and maintain a dynamic list of wallets that should be loaded
on startup that also can be shared between bitcoind and bitcoin-qt.
fab5586122 doc: Use precise permission flags where possible (MarcoFalke)
Pull request description:
Instead of mentioning the all-encompassing `-whitelist*` settings, change the docs to mention the exact permission flag that will influence the behaviour.
This is needed because in the future, the too-broad `-whitelist*` settings (they either include *all* permission flags or apply to *all* peers) might be deprecated to require the permission flags to be enumerated.
Alternatively, in the future there could be an RPC to set the net permission flags on an existing connection, in which case the `-whitelist*` terminology is of no help.
ACKs for top commit:
jnewbery:
reACK fab5586122
fjahr:
Code review ACK fab5586122
jonatack:
ACK fab5586122
Tree-SHA512: c7dea3e577d90103bb2b0ffab7b7c8640b388932a3a880f69e2b70747fc9213dc1f437085671fd54c902ec2a578458b8a2fae6dbe076642fb88efbf9fa9e679c
fa3365430c net: Use mockable time for ping/pong, add tests (MarcoFalke)
faab4aaf2f util: Add count_microseconds helper (MarcoFalke)
Pull request description:
Switch `CNode::m_ping_start` and `CNetMessage::m_time` to mockable time, so that tests can be added.
Mockable time is also type-safe, since it uses `std::chrono`
ACKs for top commit:
jonatack:
Code review re-ACK fa33654 re-read code, verified rebase per `git range-diff 4b5c919 fa94d6f fa33654`, previous tested ACKs still valid
troygiorshev:
ACK fa3365430c
Tree-SHA512: 7d632bd6019ce7c882029e71b667a61517e783af82755a85dd979ef09380934e172dec8b8f91d57b200a30a6e096aeaf01f19fee7f3aed0e0e871c72eb44d70e
41d55d3057 doc: getpeerinfo banscore deprecation release note (Jon Atack)
dd54e3796e test: getpeerinfo banscore deprecation test (Jon Atack)
8c7647b3fb rpc: deprecate banscore field in rpc getpeerinfo (Jon Atack)
Pull request description:
Per https://github.com/bitcoin/bitcoin/pull/19219#discussion_r443074487 and https://github.com/bitcoin/bitcoin/pull/19219#issuecomment-652699592, this PR deprecates returning the `banscore` field in the `getpeerinfo` RPC, updates the help, adds a test, and updates the release notes. Related to #19464.
ACKs for top commit:
fanquake:
ACK 41d55d3057
Tree-SHA512: 8eca08332581e2fe191a2aafff6ba89ce39413f0491ed0de8b86577739f0ec430b1a8fbff2914b0f3138a229563dfcc1981c0cf5b7dd6061b5c48680a28423bc
40506bf93f test: Test gettxouttsetinfo hash_type option (Fabian Jahr)
f17a4d1c4d rpc: Add hash_type NONE to gettxoutsetinfo (Fabian Jahr)
a712cf6f68 rpc: gettxoutsetinfo can specify hash_type (only legacy option for now) (Fabian Jahr)
605884ef21 refactor: Extract GetBogoSize function (Fabian Jahr)
Pull request description:
This is another intermediate part of the Coinstats Index (tracked in #18000).
Sjors suggested [here](https://github.com/bitcoin/bitcoin/pull/18000#issuecomment-641423019) that the part of the changes in #19145 that don't rely on the new `hash_type` muhash, i.e. that are for `hash_type=none`, could be merged separately from everything involving muhash. So these changes are extracted from #19145 here and can be merged without any other requirements.
Building the index with no UTXO set hash is still valuable because `gettxoutsetinfo` can still be used to audit the `total_amount` for example. By itself this PR is not a huge improvement, `hash_type=none` is speeding up `gettxoutsetinfo` by about 10%, but it enables the implementation of an index on top of it in a follow-up and that means large parts of the index code of Coinstats Index can be merged while reviews for the hashing algorithm might take longer.
ACKs for top commit:
MarcoFalke:
ACK 40506bf93f 🖨
Sjors:
tACK 40506bf93f
Tree-SHA512: 3964c2b8eed427511b1aa9b2ef285dff27dc4d1537d72c3911e435b6e6b40912232da4acb3a09bd19a0372ddffa44103388d8a650169d95a4a727b970d210add
d8e9ca66d1 walletdb: Move Rewrite into BerkeleyDatabase (Andrew Chow)
91d109156d walletdb: Move PeriodicFlush into WalletDatabase (Andrew Chow)
8f1bcf8b7b walletdb: Combine VerifyDatabaseFile and VerifyEnvironment (Andrew Chow)
Pull request description:
The `BerkeleyBatch` class has 4 static functions that operate on `BerkeleyDatabase` or `BerkeleyEnvironment`. It doesn't make sense for these to be standalone nor for them to be static functions. So instead, move them from `BerkeleyBatch` into `BerkeleyDatabase` and make them member functions instead of static.
`BerkeleyBatch::VerifyEnvironment` and `BerkeleyBatch::VerifyDatabaseFile` are combined into a single `BerkeleyDatabase::Verify` function that operates on that `BerkeleyDatabase` object.
`BerkeleyBatch::Rewrite` and `BerkeleyBatch::PeriodicFlush` both took a `BerkeleyDatabase` as an argument and did stuff on it. So we just make it a member function so it doesn't need to take a database as an argument.
Part of #18971
ACKs for top commit:
MarcoFalke:
re-ACK d8e9ca66d1 only change is test fixup 🤞
promag:
Code review ACK d8e9ca66d1, good stuff.
Tree-SHA512: 9847e55b13d98bf4e5636cc14bc3f5351d56737f7e320fafffaed128606240765599e5400382c5aecac06690f7e36265ca3e1031f3f6d8a9688f6d5cb1bacd2a
When loading descriptor caches, we would accidentally reinitialize the
descriptor cache when seeing that one already exists. This should have
only been initializing the cache when one does not exist. However this
code itself is unnecessary as the act of looking up the cache to add to
it will initialize it if it didn't already exist.
This issue could be hit by trying to load a wallet that had imported a
multisig descriptor. The wallet would fail to load.
A test has been added to wallet_importdescriptors.py to catch this case.
Another test case has also been added to check that loading a wallet
with only single key descriptors works.
84d295e513 tests: Check that segwit inputs in psbt have both UTXO types (Andrew Chow)
4600479058 psbt: always put a non_witness_utxo and don't remove it (Andrew Chow)
5279d8bc07 psbt: Allow both non_witness_utxo and witness_utxo (Andrew Chow)
72f6bec1da rpc: show both UTXOs in decodepsbt (Andrew Chow)
Pull request description:
Due to recent changes to hardware wallets, the full previous transaction will need to be provided for segwit inputs. Since some software may be checking for the existence of a `witness_utxo` to determine whether to produce a segwit signature, we keep that field to ease the transition.
Because all of the sanity checks implemented by the `IsSane` functions were related to having mixed segwit and non-segwit data in a PSBT, those functions are removed as those checks are no longer proper.
Some tests are updated/removed to accommodate this and a simple test added to check that both UTXOs are being added to segwit inputs.
As discussed in the wallet IRC meeting, our own signer will not require `non_witness_utxo` for segwit inputs.
ACKs for top commit:
Sjors:
utACK 84d295e513 (didn't retest compared to 836d6fc, but fortunately HWI's CI tracks our master branch, with a bunch of hardware wallet simulators)
ryanofsky:
Code review re-ACK 84d295e513. No changes since last review, but now I understand the context better. I think it would good to improve the comments as suggested https://github.com/bitcoin/bitcoin/pull/19215#discussion_r447889473 and maybe refer to
meshcollider:
utACK 84d295e513
Tree-SHA512: ccc1fd3c16ac3859f5aca4fa489bd40f68be0b81bbdc4dd51188bbf28827a8642dc8b605a37318e5f16cf40f1c4910052dace2f27eca21bb58435f02a443e940
3a7e79478a test: retry when write to a socket fails on macOS (Ivan Metlushko)
8cf9d15b82 test: use pgrep for better compatibility (Ivan Metlushko)
Pull request description:
Rationale: a few minor changes to make experience of running tests on macOS a bit better
1.`pidof` is not available on BSD/macOS, while `pgrep` is present on BSD, Linux and macOS
2. Add retry as a workaround for a weird behavior when writing to a socket (https://bugs.python.org/issue33450). Stacktrace attached
Man pages:
https://www.freebsd.org/cgi/man.cgi?query=pgrep&apropos=0&sektion=1&manpath=FreeBSD+6.0-RELEASE&arch=default&format=htmlhttps://man7.org/linux/man-pages/man1/pgrep.1.html
Related to #19281
Stacktrace example:
```
...
33/161 - feature_abortnode.py failed, Duration: 63 s
stdout:
2020-06-11T10:46:43.947000Z TestFramework (INFO): Initializing test directory /var/folders/2q/d5w9zh614r7g5c8r74ln3g400000gq/T/test_runner_₿_🏃_20200611_174102/feature_abortnode_128
2020-06-11T10:46:45.199000Z TestFramework (INFO): Waiting for crash
2020-06-11T10:47:15.921000Z TestFramework (INFO): Node crashed - now verifying restart fails
2020-06-11T10:47:47.068000Z TestFramework (INFO): Stopping nodes
[node 1] Cleaning up leftover process
stderr:
Traceback (most recent call last):
File "/Users/xxx/Projects/bitcoin/test/functional/feature_abortnode.py", line 50, in <module>
AbortNodeTest().main()
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/test_framework.py", line 142, in main
exit_code = self.shutdown()
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/test_framework.py", line 266, in shutdown
self.stop_nodes()
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/test_framework.py", line 515, in stop_nodes
node.stop_node(wait=wait)
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/test_node.py", line 318, in stop_node
self.stop(wait=wait)
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/coverage.py", line 47, in __call__
return_val = self.auth_service_proxy_instance.__call__(*args, **kwargs)
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/authproxy.py", line 142, in __call__
response, status = self._request('POST', self.__url.path, postdata.encode('utf-8'))
File "/Users/xxx/Projects/bitcoin/test/functional/test_framework/authproxy.py", line 107, in _request
self.__conn.request(method, path, postdata, headers)
File "/Users/xxx/.pyenv/versions/3.5.6/lib/python3.5/http/client.py", line 1107, in request
self._send_request(method, url, body, headers)
File "/Users/xxx/.pyenv/versions/3.5.6/lib/python3.5/http/client.py", line 1152, in _send_request
self.endheaders(body)
File "/Users/xxx/.pyenv/versions/3.5.6/lib/python3.5/http/client.py", line 1103, in endheaders
self._send_output(message_body)
File "/Users/xxx/.pyenv/versions/3.5.6/lib/python3.5/http/client.py", line 936, in _send_output
self.send(message_body)
File "/Users/xxx/.pyenv/versions/3.5.6/lib/python3.5/http/client.py", line 908, in send
self.sock.sendall(data)
OSError: [Errno 41] Protocol wrong type for socket
```
ACKs for top commit:
laanwj:
ACK 3a7e79478a
Tree-SHA512: fefbe40ce94ab29f18bbbed2a434194b1384ffa5279b1d04db7a3708e3dd422bd9e450f1db3f95a1a851fac5a626ab533c6ebcfd7ede96f8ccae9e6f3e9fff92
9b009fae6e qa: Test concurrent wallet loading (João Barbosa)
b9971ae585 wallet: Handle concurrent wallet loading (João Barbosa)
Pull request description:
This PR handles concurrent wallet loading.
This can be tested by running in parallel the following script a couple of times:
```sh
for i in {1..10}
do
src/bitcoin-cli -regtest loadwallet foo
src/bitcoin-cli -regtest unloadwallet foo
done
```
Eventually the error occurs:
```
error code: -4
error message:
Wallet already being loading.
```
For reference, loading and already loaded wallet gives:
```
error code: -4
error message:
Wallet file verification failed. Error loading wallet w1. Duplicate -wallet filename specified.
```
Fixes#19232.
ACKs for top commit:
MarcoFalke:
Concept ACK 9b009fae6e I have not reviewed the code
hebasto:
ACK 9b009fae6e, tested on Linux Mint 20 (x86_64):
ryanofsky:
Code review good-but-not-ideal ACK 9b009fae6e
Tree-SHA512: 0ccd77b03c0926e4c4e51efb31e193b93cb4b9ffe8bac6bb018f7344c55dfd939b873b8cf5e657dca73e6202eb75aa672de2acb787cc133184b0b3b51e47b972
fa525e4d1c net: Avoid wasting inv traffic during IBD (MarcoFalke)
fa06d7e934 refactor: block import implies IsInitialBlockDownload (MarcoFalke)
faba65e696 Add ChainstateManager::ActiveChainstate (MarcoFalke)
fabf3d64ff test: Add FeeFilterRounder test (MarcoFalke)
Pull request description:
Tx-inv messages are ignored during IBD, so it would be nice if we told peers to not send them in the first place. Do that by sending two `feefilter` messages: One when the connection is made (and the node is in IBD), and another one when the node leaves IBD.
ACKs for top commit:
jamesob:
ACK fa525e4d1c ([`jamesob/ackr/19204.1.MarcoFalke.p2p_reduce_inv_traffic_d`](https://github.com/jamesob/bitcoin/tree/ackr/19204.1.MarcoFalke.p2p_reduce_inv_traffic_d))
naumenkogs:
utACK fa525e4
gzhao408:
ACK fa525e4d1c
jonatack:
re-ACK fa525e4 checked diff `git range-diff 19612ca fa8a66c fa525e4`, re-reviewed, ran tests, ran a custom p2p IBD behavior test at 9321e0f223.
hebasto:
re-ACK fa525e4d1c, only rebased since the [previous](https://github.com/bitcoin/bitcoin/pull/19204#pullrequestreview-429519667) review (verified with `git range-diff`).
Tree-SHA512: 2c22a5def9822396fca45d808b165b636f1143c4bdb2eaa5c7e977f1f18e8b10c86d4c180da488def38416cf3076a26de15014dfd4d86b2a7e5af88c74afb8eb
25dac9fa65 doc: add release notes for explicit fee estimators and bumpfee change (Karl-Johan Alm)
05227a3554 tests for bumpfee / estimate_modes (Karl-Johan Alm)
3404c1b753 policy: optional FeeEstimateMode param to CFeeRate::ToString (Karl-Johan Alm)
6fcf448430 rpc/wallet: add two explicit modes to estimate_mode (Karl-Johan Alm)
b188d80c2d MOVEONLY: Make FeeEstimateMode available to CFeeRate (Karl-Johan Alm)
5d1a411eb1 fees: add FeeModes doc helper function (Karl-Johan Alm)
91f6d2bc8f rpc/wallet: add conf_target as alias to confTarget in bumpfee (Karl-Johan Alm)
69158b41fc added CURRENCY_ATOM to express minimum indivisible unit (Karl-Johan Alm)
Pull request description:
This lets users pick their own fees when using `sendtoaddress`/`sendmany` if they prefer this over the estimators.
ACKs for top commit:
Sjors:
re-utACK 25dac9fa65: rebased, more fancy C++,
jonatack:
ACK 25dac9fa65 I think this should be merged after all this time, even though it looks to me like there are needed follow-ups, fixes and test coverage to be added (see further down), which I don't mind helping out with, if wanted.
fjahr:
Code review ACK 25dac9fa65
Tree-SHA512: f31177e6cabf3187a43cdfe93477144f8e8385c7344613743cbbd16e8490d53ff5144aec7b9de6c9a65eb855b55e0f99d7f164dee4b6bf3cfea4dce51cf11d33
If the socket is tearing down macOS will return EPROTOTYPE instead of EPIPE.
Because python doesn't handle this internally we have to do a workaround and retry the request.
See https://bugs.python.org/issue33450
