Commit graph

28 commits

Author SHA1 Message Date
PouleyKetchoupp
189e4e59ad Fixed KinematicCollision.get_local_shape() - the local shape id was never set during move_and_collide()
Fixes #31144
2019-08-07 12:32:32 +02:00
JohnJLight
38d3bfe971 Made use of semicolons more consitent, fixed formatting 2019-06-19 15:24:31 +02:00
Daniel Rakos
6dd65c0d67 KinematicBody performance and quality improvements
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.

List of fixes and improvements:

- Fixed a general bug in move_and_slide that affects both GodotPhysics and
  Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
  is disabled. Not sure where that came from, but looking at the 2D physics
  code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
  tests against individual shapes of compound shapes. This is crucial to get
  good performance with Gridmaps and in general improves the performance
  whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
  module for KinematicBodies to also do broadphase on the sub-shapes of
  compound collision shapes. This is possible thanks to the dynamic AABB
  tree that was previously disabled and it's the change that provides the
  biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
  once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
  was completely broken previously, overwriting previous results and similar
  non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
  not respected at all, and the KinematicBody code for ray separation was
  complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
  used in the ray result array.

There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").

Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
2019-03-27 00:39:47 +01:00
Daniel Rakos
f7511511b1 Fix RayShape collision when used with a KinematicBody (Bullet Physics)
- Added code handling non-compound collision to recover_from_penetration_ray()
  which is now needed due to the optimization avoiding the use of compound
  collisions when only a single collision shape is used.
- Removed arbitrary margin applied in the collision algorithm of RayShapes
  which causes jittered movement. For lack of a better replacement and for
  lack of any explanation on why it has been introduced, it's now using the
  shape's margin property instead which is small enough to not show visible
  jitter.
- Tried to get rid of inconsistent uses of the collision margin.
- Removed hack from GodotDeepPenetrationContactResultCallback::addContactPoint
  for RayShape collision as it's no longer needed as the collision algorithm
  of RayShapes correctly calculates the contact normal for a while now.

Fixes #25227.
2019-02-19 11:16:05 +01:00
Rémi Verschelde
b16c309f82 Update copyright statements to 2019
Happy new year to the wonderful Godot community!
2019-01-01 12:58:10 +01:00
Rémi Verschelde
686f6ff279 Fix mismatched class/struct definition warnings [-Wmismatched-tags]
Fixes the following Clang 7 warnings:
```
core/object.cpp:44:1: warning: '_ObjectDebugLock' defined as a struct here but previously declared as a class [-Wmismatched-tags]
core/variant_call.cpp:43:1: warning: '_VariantCall' defined as a struct here but previously declared as a class [-Wmismatched-tags]
drivers/gles3/rasterizer_storage_gles3.h:765:2: warning: 'MultiMesh' defined as a struct here but previously declared as a class [-Wmismatched-tags]
editor/editor_node.h:794:1: warning: 'EditorProgress' defined as a struct here but previously declared as a class [-Wmismatched-tags]
modules/bullet/rigid_body_bullet.h:230:17: warning: class 'KinematicUtilities' was previously declared as a struct [-Wmismatched-tags]
modules/bullet/space_bullet.h:60:1: warning: class 'btSoftBodyWorldInfo' was previously declared as a struct [-Wmismatched-tags]
scene/resources/world_2d.cpp:40:1: warning: 'SpatialIndexer2D' defined as a struct here but previously declared as a class [-Wmismatched-tags]
scene/resources/world.cpp:39:1: warning: 'SpatialIndexer' defined as a struct here but previously declared as a class [-Wmismatched-tags]
servers/audio/reverb_sw.cpp:60:1: warning: 'ReverbParamsSW' defined as a struct here but previously declared as a class [-Wmismatched-tags]
thirdparty/bullet/BulletSoftBody/btSoftBody.h:43:1: warning: 'btSoftBodyWorldInfo' defined as a struct here but previously declared as a class [-Wmismatched-tags]
```
2018-10-01 17:02:47 +02:00
Rémi Verschelde
2091f20443 Fix warnings about wrong member initialization order [-Wreorder]
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning:   'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning:   'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning:   'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning:   'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning:   when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning:   'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning:   'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning:   'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning:   'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning:   'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning:   'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning:   'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning:   'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning:   'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning:   'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning:   'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning:   'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning:   'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning:   'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning:   when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning:   'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning:   'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning:   'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning:   'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning:   when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning:   'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning:   'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning:   'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning:   when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning:   'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning:   when initialized here [-Wreorder]
```

Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
2018-09-28 17:30:28 +02:00
Andrea Catania
d226ba7c2b Corrected cast_motion query behaviour 2018-09-22 11:17:31 +02:00
Andrea Catania
88967e4001 Fixing trimesh precision 2018-09-06 18:53:03 +02:00
Andrea Catania
0b98834b77 Added ray / shape / point / motion / rest cast exclusion of area and or body 2018-08-21 18:51:08 +02:00
Juan Linietsky
d88d0d457d Fixes to move and slide and ray separation, implement separation in Godot physics 2018-08-20 17:31:55 -03:00
Andrea Catania
0010d9c82a Added ray shape and move_and_slide with snapping on 3D.
Added stop_on_slope on 2d part
2018-08-19 13:45:23 +02:00
Hein-Pieter van Braam
0e29f7974b Reduce unnecessary COW on Vector by make writing explicit
This commit makes operator[] on Vector const and adds a write proxy to it.  From
now on writes to Vectors need to happen through the .write proxy. So for
instance:

Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;

Failing to use the .write proxy will cause a compilation error.

In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.

_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
2018-07-26 00:54:16 +02:00
AndreaCatania
17ebbfb56d Implemented Soft body
- Soft Body Physics node
- Soft Body Rendering
- Soft body Editor
- Soft body importer
2018-07-23 20:50:23 +02:00
Andrea Catania
6ed392f47a Improved kinematic body 2D and 3D, Now can move rigid body 2018-02-20 12:43:47 +01:00
Paolo Perkovic
08d4bfacaf Fix inconsistencies and typos in argument names 2018-02-01 16:47:20 +01:00
AndreaCatania
50c99370d2 Fixed Bullet collision shapes scale 2018-01-08 16:44:33 +01:00
Rémi Verschelde
e4213e66b2 Add missing copyright headers and fix formatting
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
2018-01-05 01:22:23 +01:00
Rémi Verschelde
f8b58784bc
Merge pull request #13257 from AndreaCatania/master
Fixed kinematic movement stuck, Changed how shape scale works.
2018-01-04 15:26:23 +01:00
Rémi Verschelde
b50a9114b1 Update copyright statements to 2018
Happy new year to the wonderful Godot community!
2018-01-01 14:40:47 +01:00
AndreaCatania
f4b96cc0a9 Fixed kinematic movement stuck, Changed how shape scale works, Optimized 2017-12-23 18:23:12 +01:00
Rémi Verschelde
13c2ff9320 Style: Apply new clang-format 5.0 style to all files 2017-12-07 08:02:00 +01:00
AndreaCatania
d6e413bb9c Removed type_mask and fixed some variable name 2017-11-21 22:56:40 +01:00
AndreaCatania
e6ba163031 Fixed kinematic movement on concave shape 2017-11-19 17:01:08 +01:00
Juan Linietsky
50a9bd4e23
Merge pull request #12713 from AndreaCatania/master
Rewritten kinematic system
2017-11-09 16:08:58 -03:00
AndreaCatania
5f110c5b98 Fixed collision exception - #12681 2017-11-07 19:07:01 +01:00
AndreaCatania
10f879bf88 Rewritten kinematic system 2017-11-07 15:22:09 +01:00
AndreaCatania
fb4871c919 Bullet physics engine implementation
This is a bullet wrapper that allows Godot to use Bullet physics and benefit about all features.
Also it support all specific Godot physics functionality like multi shape body, areas, RayShape, etc..
It improve the Joints, Trimesh shape, and add support to soft body even if Godot is not yet ready to it.
2017-11-04 20:52:59 +01:00