Fixes scenario where zones are appropriately
handled, along with supporting overriding set
count. The new fix also ensures that we handle
the various setup types properly.
Update documentation to properly indicate the
behavior.
Fixes#8750
Co-authored-by: Nitish Tiwari <nitish@minio.io>
This is to ensure that when we have multiple tenants
deployed all sharing the same etcd for global bucket
should avoid listing each others buckets, this leads
to information leak which should be avoided unless
etcd is not namespaced for IAM assets in which case
it can be assumed that its a federated setup.
Federated setup and namespaced IAM assets on etcd
is not supported since namespacing is only useful
when you wish to separate the tenants as isolated
instances of MinIO.
This PR allows a new type of behavior, primarily
driven by the usecase of m3(mkube) multi-tenant
deployments with global bucket support.
Final update to all messages across sub-systems
after final review, the only change here is that
NATS now has TLS and TLSSkipVerify to be consistent
for all other notification targets.
This PR adds support below metrics
- Cache Hit Count
- Cache Miss Count
- Data served from Cache (in Bytes)
- Bytes received from AWS S3
- Bytes sent to AWS S3
- Number of requests sent to AWS S3
Fixes#8549
level - this PR builds on #8120 which
added PutBucketObjectLockConfiguration and
GetBucketObjectLockConfiguration APIS
This PR implements PutObjectRetention,
GetObjectRetention API and enhances
PUT and GET API operations to display
governance metadata if permissions allow.
- Migrate and save only settings which are enabled
- Rename logger_http to logger_webhook and
logger_http_audit to audit_webhook
- No more pretty printing comments, comment
is a key=value pair now.
- Avoid quotes on values which do not have space in them
- `state="on"` is implicit for all SetConfigKV unless
specified explicitly as `state="off"`
- Disabled IAM users should be disabled always
This PR implements locking from a global entity into
a more localized set level entity, allowing for locks
to be held only on the resources which are writing
to a collection of disks rather than a global level.
In this process this PR also removes the top-level
limit of 32 nodes to an unlimited number of nodes. This
is a precursor change before bring in bucket expansion.
This PR fixes issues found in config migration
- StorageClass migration error when rrs is empty
- Plain-text migration of older config
- Do not run in safe mode with incorrect credentials
- Update logger_http documentation for _STATE env
Refer more reported issues at #8434
This PR refactors object layer handling such
that upon failure in sub-system initialization
server reaches a stage of safe-mode operation
wherein only certain API operations are enabled
and available.
This allows for fixing many scenarios such as
- incorrect configuration in vault, etcd,
notification targets
- missing files, incomplete config migrations
unable to read encrypted content etc
- any other issues related to notification,
policies, lifecycle etc
- Supports migrating only when the credential ENVs are set,
so any FS mode deployments which do not have ENVs set will
continue to remain as is.
- Credential ENVs can be rotated using MINIO_ACCESS_KEY_OLD
and MINIO_SECRET_KEY_OLD envs, in such scenarios it allowed
to rotate the encrypted content to a new admin key.
- adding oauth support to MinIO browser (#8400) by @kanagaraj
- supports multi-line get/set/del for all config fields
- add support for comments, allow toggle
- add extensive validation of config before saving
- support MinIO browser to support proper claims, using STS tokens
- env support for all config parameters, legacy envs are also
supported with all documentation now pointing to latest ENVs
- preserve accessKey/secretKey from FS mode setups
- add history support implements three APIs
- ClearHistory
- RestoreHistory
- ListHistory
- add help command support for each config parameters
- all the bug fixes after migration to KV, and other bug
fixes encountered during testing.
The measures are consolidated to the following metrics
- `disk_storage_used` : Disk space used by the disk.
- `disk_storage_available`: Available disk space left on the disk.
- `disk_storage_total`: Total disk space on the disk.
- `disks_offline`: Total number of offline disks in current MinIO instance.
- `disks_total`: Total number of disks in current MinIO instance.
- `s3_requests_total`: Total number of s3 requests in current MinIO instance.
- `s3_errors_total`: Total number of errors in s3 requests in current MinIO instance.
- `s3_requests_current`: Total number of active s3 requests in current MinIO instance.
- `internode_rx_bytes_total`: Total number of internode bytes received by current MinIO server instance.
- `internode_tx_bytes_total`: Total number of bytes sent to the other nodes by current MinIO server instance.
- `s3_rx_bytes_total`: Total number of s3 bytes received by current MinIO server instance.
- `s3_tx_bytes_total`: Total number of s3 bytes sent by current MinIO server instance.
- `minio_version_info`: Current MinIO version with commit-id.
- `s3_ttfb_seconds_bucket`: Histogram that holds the latency information of the requests.
And this PR also modifies the current StorageInfo queries
- Decouples StorageInfo from ServerInfo .
- StorageInfo is enhanced to give endpoint information.
NOTE: ADMIN API VERSION IS BUMPED UP IN THIS PR
Fixes#7873
specific errors, `application` errors or `all` by default.
console logging on server by default lists all logs -
enhance admin console API to accept `type` as query parameter to
subscribe to application/minio logs.
This PR additionally also adds support for missing
- Session policy support for AD/LDAP
- Add API request/response parameters detail
- Update example to take ldap username,
password input from the command line
- Fixes session policy handling for
ClientGrants and WebIdentity
This commit removes the SSE-S3 key rotation functionality
from CopyObject since there will be a dedicated Admin-API
for this purpose.
Also update the security documentation to link to mc and
the admin documentation.
This PR changes cache on PUT behavior to background fill the cache
after PutObject completes. This will avoid concurrency issues as in #8219.
Added cleanup of partially filled cache to prevent cache corruption
- Fixes#8208
Add LDAP based users-groups system
This change adds support to integrate an LDAP server for user
authentication. This works via a custom STS API for LDAP. Each user
accessing the MinIO who can be authenticated via LDAP receives
temporary credentials to access the MinIO server.
LDAP is enabled only over TLS.
User groups are also supported via LDAP. The administrator may
configure an LDAP search query to find the group attribute of a user -
this may correspond to any attribute in the LDAP tree (that the user
has access to view). One or more groups may be returned by such a
query.
A group is mapped to an IAM policy in the usual way, and the server
enforces a policy corresponding to all the groups and the user's own
mapped policy.
When LDAP is configured, the internal MinIO users system is disabled.
With this PR, liveness check responds with 200 OK with "server-not-
initialized" header while objectLayer gets initialized. The header
is removed as objectLayer is initialized. This is to allow
MinIO distributed cluster to get started when running on an
orchestration platforms like Docker Swarm.
This PR also updates sample Swarm yaml files to use correct values
for healthcheck fields.
Fixes#8140
There are multiple possibilities for running MinIO within
a container e.g. configurable address, non-root user etc.
This makes it difficult to identify actual IP / Port to
use to check healthcheck status from within a container.
It is simpler to use external healthcheck mechanisms
like healthcheck command in docker-compose to check
for MinIO health status. This is similar to how checks
work in Kubernetes as well.
This PR removes the healthcheck script used inside
Docker container and ad documentation on how to
use docker-compose based healthcheck mechanism.
Fixes#7458Fixes#7573Fixes#7938Fixes#6934Fixes#6265Fixes#6630
This will allow the cache to consistently work for
server and gateways. Range GET requests will
be cached in the background after the request
is served from the backend.
- All cached content is automatically bitrot protected.
- Avoid ETag verification if a cache-control header
is set and the cached content is still valid.
- This PR changes the cache backend format, and all existing
content will be migrated to the new format. Until the data is
migrated completely, all content will be served from the backend.
Without explicit conversion to UTC() from Unix
time the zone information is lost, this leads
to XML marshallers marshaling the time into
a wrong format.
This PR fixes the compatibility issue with AWS STS
API by keeping Expiration format close to ISO8601
or RFC3339
Fixes#8041
This commit adds a new method `UpdateKey` to the KMS
interface.
The purpose of `UpdateKey` is to re-wrap an encrypted
data key (the key generated & encrypted with a master key by e.g.
Vault).
For example, consider Vault with a master key ID: `master-key-1`
and an encrypted data key `E(dk)` for a particular object. The
data key `dk` has been generated randomly when the object was created.
Now, the KMS operator may "rotate" the master key `master-key-1`.
However, the KMS cannot forget the "old" value of that master key
since there is still an object that requires `dk`, and therefore,
the `D(E(dk))`.
With the `UpdateKey` method call MinIO can ask the KMS to decrypt
`E(dk)` with the old key (internally) and re-encrypted `dk` with
the new master key value: `E'(dk)`.
However, this operation only works for the same master key ID.
When rotating the data key (replacing it with a new one) then
we perform a `UnsealKey` operation with the 1st master key ID
and then a `GenerateKey` operation with the 2nd master key ID.
This commit also updates the KMS documentation and removes
the `encrypt` policy entry (we don't use `encrypt`) and
add a policy entry for `rewarp`.
There is no reliable way to handle fallbacks for
MinIO deployments, due to various command line
options and multiple locations which require
access inside container.
Parsing command line options is tricky to figure
out which is the backend disk etc, we did try
to fix this in implementations of check-user.go
but it wasn't complete and introduced more bugs.
This PR simplifies the entire approach to rather
than running Docker container as non-root by default
always, it allows users to opt-in. Such that they
are aware that that is what they are planning to do.
In-fact there are other ways docker containers can
be run as regular users, without modifying our
internal behavior and adding more complexities.
- Snappy is not and RLE compressor, it is LZ77 based.
- Add `xz` as a common file type.
- Add most common media container types.
- Never heard of `application/x-spoon`. Google turns up a blank as well.
- Change link to minio blog post on compression & encryption.
This commit removes the encryption key section from
the certool.exe docs because:
- MinIO does not support any TLS cipher that encrypts
something with the private key. We only support PFS
ciphers.
- The doc comment is not really accurate anyway.
This PR adds support for adding session policies
for further restrictions on STS credentials, useful
in situations when applications want to generate
creds for multiple interested parties with different
set of policy restrictions.
This session policy is not mandatory, but optional.
Fixes#7732
etcd when used in federated setups, currently
mandates that all clusters should have same
config.json, which is too restrictive and makes
federation a restrictive environment.
This change makes it apparent that each cluster
needs to be independently managed if necessary
from `mc admin info` command line.
Each cluster with in federation can have their
own root credentials and as well as separate
regions. This way buckets get further restrictions
and allows for root creds to be not common
across clusters/data centers.
Existing data in etcd gets migrated to backend
on each clusters, upon start. Once done
users can change their config entries
independently.
This will allow cache to consistently work for
server and gateways. Range GET requests will
be cached in the background after the request
is served from the backend.
Fixes: #7458, #7573, #6265, #6630
- [x] Support bucket and regular object operations
- [x] Supports Select API on HDFS
- [x] Implement multipart API support
- [x] Completion of ListObjects support
- The events will be persisted in queueStore if `queueDir` is set.
- Else, if queueDir is not set events persist in memory.
The events are replayed back when the mqtt broker is back online.
This change adds support for casting strings to Timestamp via CAST:
`CAST('2010T' AS TIMESTAMP)`
It also implements the following date-time functions:
- UTCNOW()
- DATE_ADD()
- DATE_DIFF()
- EXTRACT()
For values passed to these functions, date-types are automatically
inferred.
More than one client can't use the same clientID for MQTT connection.
This causes problem in distributed deployments where config is shared
across nodes, as each Minio instance tries to connect to MQTT using the
same clientID.
This commit removes the clientID field in config, and allows
MQTT client to create random clientID for each node.
- New parser written from scratch, allows easier and complete parsing
of the full S3 Select SQL syntax. Parser definition is directly
provided by the AST defined for the SQL grammar.
- Bring support to parse and interpret SQL involving JSON path
expressions; evaluation of JSON path expressions will be
subsequently added.
- Bring automatic type inference and conversion for untyped
values (e.g. CSV data).
Requirements like being able to run minio gateway in ec2
pointing to a Minio deployment wouldn't work properly
because IAM creds take precendence on ec2.
Add checks such that we only enable AWS specific features
if our backend URL points to actual AWS S3 not S3 compatible
endpoints.
- Default support for S3 dualstack endpoints (IPv6 support)
- Support granular policy conditionals in List operations
- Support proxy cookies for stickiness
This commit adds some documentation about the design of the
SSE-C and SSE-S3 implementation. It describes how the Minio server
encrypt objects and manages keys.
This PR adds pass-through, single encryption at gateway and double
encryption support (gateway encryption with pass through of SSE
headers to backend).
If KMS is set up (either with Vault as KMS or using
MINIO_SSE_MASTER_KEY),gateway will automatically perform
single encryption. If MINIO_GATEWAY_SSE is set up in addition to
Vault KMS, double encryption is performed.When neither KMS nor
MINIO_GATEWAY_SSE is set, do a pass through to backend.
When double encryption is specified, MINIO_GATEWAY_SSE can be set to
"C" for SSE-C encryption at gateway and backend, "S3" for SSE-S3
encryption at gateway/backend or both to support more than one option.
Fixes#6323, #6696
This commit adds a section to the master key documentation
describing how to generate a random 256 bit master key.
Further this commit adds a warning that master keys are not
recommended for production systems because it's (currently)
not possible to replace a master key (e.g. in case of compromise).
This commit adds an auto-encryption feature which allows
the Minio operator to ensure that uploaded objects are
always encrypted.
This change adds the `autoEncryption` configuration option
as part of the KMS conifguration and the ENV. variable
`MINIO_SSE_AUTO_ENCRYPTION:{on,off}`.
It also updates the KMS documentation according to the
changes.
Fixes#6502
This refactors the vault configuration by moving the
vault-related environment variables to `environment.go`
(Other ENV should follow in the future to have a central
place for adding / handling ENV instead of magic constants
and handling across different files)
Further this commit adds master-key SSE-S3 support.
The operator can specify a SSE-S3 master key using
`MINIO_SSE_MASTER_KEY` which will be used as master key
to derive and encrypt per-object keys for SSE-S3
requests.
This commit is also a pre-condition for SSE-S3
auto-encyption support.
Fixes#6329
This commit renames the env variable for vault namespaces
such that it begins with `MINIO_SSE_`. This is the prefix
for all Minio SSE related env. variables (like KMS).
clientID must be a unique `UUID` for each connections. Now, the
server generates it, rather considering the config.
Removing it as it is non-beneficial right now.
Fixes#6364
This PR adds support
- Request query params
- Request headers
- Response headers
AuditLogEntry is exported and versioned as well
starting with this PR.
This PR supports two models for etcd certs
- Client-to-server transport security with HTTPS
- Client-to-server authentication with HTTPS client certificates
This PR introduces two new features
- AWS STS compatible STS API named AssumeRoleWithClientGrants
```
POST /?Action=AssumeRoleWithClientGrants&Token=<jwt>
```
This API endpoint returns temporary access credentials, access
tokens signature types supported by this API
- RSA keys
- ECDSA keys
Fetches the required public key from the JWKS endpoints, provides
them as rsa or ecdsa public keys.
- External policy engine support, in this case OPA policy engine
- Credentials are stored on disks
