This lets us set these values globaly, in our Travis and AppVeyor
configurations instead of forcing every test to opt-in. It also means
that by default, local builds will not report any of this data (and
will not need access to these endpoints).
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
Tests now target managed stacks instead of local stacks.
The existing logged in user and target backend API are used unless PULUMI_ACCES_TOKEN is defined, in which case tests are run under that access token and against the PULUMI_API backend.
For developer machines, we will now need to be logged in to Pulumi to run tests, and whichever default API backend is logged in (the one listed as current in ~/.pulumi/credentials.json) will be used. If you need to override these, provide PULUMI_ACCESS_TOKEN and possibly PULUMI_API.
For Travis, we currently target the staging service using the Pulumi Bot user.
We have decided to run tests in the pulumi organization. This can be overridden for local testing (or in Travis in the future) by defining PULUMI_API_OWNER_ORGANIZATION and using an access token with access to that organization.
Part of pulumi/home#195.
We need to support the current version of the nodejs language host
running programs that use older version of @pulumi/pulumi where the
runtime expected config keys to look like
`<package>:config:<name>`. In the language host we actually did the
transformation from the new format to the old one, for compatability
reasons but we then droped the transfomed value on the floor.
In order to begin publishing our core SDK package to NPM, we will
need it to be underneath the @pulumi scope so that it may remain
private. Eventually, we can alias pulumi back to it.
This is part of pulumi/pulumi#915.
As it stands, we serialize more than is correct when registering
resources: in addition to serializing the RegisterResource RPC, we also
wait for input properties to resolve in the same context. Unfortunately,
this means that we can create cycles in the promise graph when a
resource A is constructed in an earlier turn than some resource B and
one of B's output properties is an input to resource A. These changes
fix this issue by allowing input properties to resolve *before*
serializing the RegisterResource RPC.
Some integration tests had taken a dependency on the ordering of resources in
either the output of the `pulumi` command or the checkpoint file. The
only test that took a dependency on command output was updated s.t. its
resources have exactly one legal topographical sort (and therefore their
ordering is deterministic). The other tests were updated s.t. their
validation did not depend on resource ordering.
It was possiblef for the finally for a stack to complete before all
other resources had been created. In this case, we would put these new
resources at top level, instead of having them as children of the
stack resource.
Since we do not use the langhost across stacks, we can simply set the
stack resource at top level and never remove it.
Fixes#818
This will allow us to remove a lot of current boilerplate in individual tests, and move it into the test harness.
Note that this will require updating users of the integration test framework. By moving to a property bag of inputs, we should avoid needing future breaking changes to this API though.
* Take an options pointer so values can change as a test runs.
* Don't pass redundant information.
* Extract initialization routine.
* Fix caller.
* Check return value.
* Extract destruction logic.
* Move preview and update into their own function.
* Inline null check.
* Revert "Make sure we properly update dir so that pulumi-destroy works."
This reverts commit 56bfc57998.
* Revert "Edits needs to continuously pass along the new directory. (#668)"
This reverts commit 8bd1822722.
* Revert "Refactor test code to make it simpler to validate code in the middle. (#662)"
This reverts commit ed65360157.
These changes introduce a new field, `Raw`, to `diag.Message`. This
field indicates that the contents of the message are not a format string
and should not be rendered via `Sprintf` during stringification.
The plugin std{out,err} readers have been updated to use raw messages,
and the event reader in `pulumi` has been fixed s.t. it does not format
event payloads before display.
Fixes#551.
Add the ability to upload data and timing for test runs to S3. Uploaded data is designed to be queried via a service like AWS Athena and these queries can then be imported into BI tools (Excel, QuickSight, PowerBI, etc.)
Initially hook this up to the `minimal` test as a baseline.
This adds a minimal runtime verification test to our basic
test suite, to at least exercise the portions of the integration
test library that load up and parse checkpoint files.
The `nodejs` language support is implemented as two programs: one that
manages the initial connection to the engine and provides the language
serivce itself, and another that the language service invokes in order
to run a `nodejs` Pulumi program. The latter is responsible for running
the user's program and communicating its resource requests to the
engine. Currently, `run` effectively assumes that the user's program
will run synchronously from start to finish, and will disconnect from
the engine once the user's program has completed. This assumption breaks
if the user's program requires multiple turns of the event loop to
finish its root resource requests. For example, the following program
would fail to create its second resource because the engine will be
disconnected once it reaches its `await`:
```
(async () => {
let a = new Resource();
await somePromise();
let = new Resource();
})();
```
These changes fix this issue by disconnecting from the engine during
process shutdown rather than after the user's program has finished its
first turn through the event loop.
We now encrypt secrets at rest based on a key derived from a user
suplied passphrase.
The system is designed in a way such that we should be able to have a
different decrypter (either using a local key or some remote service
in the Pulumi.com case in the future).
Care is taken to ensure that we do not leak decrypted secrets into the
"info" section of the checkpoint file (since we currently store the
config there).
In addtion, secrets are "pay for play", a passphrase is only needed
when dealing with a value that's encrypted. If secure config values
are not used, `pulumi` will never prompt you for a
passphrase. Otherwise, we only prompt if we know we are going to need
to decrypt the value. For example, `pulumi config <key>` only prompts
if `<key>` is encrypted and `pulumi deploy` and friends only prompt if
you are targeting a stack that has secure configuration assoicated
with it.
Secure values show up as unecrypted config values inside the language
hosts and providers.
During the course of a `pulumi update`, it is possible for a resource to
become slated for deletion. In the case that this deletion is part of a
replacement, another resource with the same URN as the to-be-deleted
resource will have been created earlier. If the `update` fails after the
replacement resource is created but before the original resource has been
deleted, the snapshot must capture that the original resource still exists
and should be deleted in a future update without losing track of the order
in which the deletion must occur relative to other deletes. Currently, we
are unable to track this information because the our checkpoints require
that no two resources have the same URN.
To fix this, these changes introduce to the update engine the notion of a
resource that is pending deletion and change checkpoint serialization to
use an array of resources rather than a map. The meaning of the former is
straightforward: a resource that is pending deletion should be deleted
during the next update.
This is a fairly major breaking change to our checkpoint files, as the
map of resources is no more. Happily, though, it makes our checkpoint
files a bit more "obvious" to any tooling that might want to grovel
or rewrite them.
Fixes#432, #387.
A dynamic resource is a resource whose provider is implemented alongside
the resource itself. This provider may close over and use orther
resources in the implementation of its CRUD operations. The provider
itself must be stateless, as each CRUD operation for a particular
dynamic resource type may use an independent instance of the provider.
Changes to the definition of a resource's provider result in replacement
of the resource itself (rather than a simple update), as this allows the
old provider definition to delete the old resource and the new provider
definition to create an appropriate replacement.
Previously, you had to fully qualify configuration values (e.g
example:config:message). As a convience, let's support adding
configuration values where the key is not a fully qualified module
member. In this case, we'll treat the key as if
`<program-name>:config:` had been prepended to it.
In addition, when we print config, shorten keys of the form
`<program-name>:config:<key-name>` to `<key-name>`.
I've updated one integration test to use the new syntax and left the
other as is to ensure both continue to work.
* Remove the bitrotted and useless basic/abc/ test.
* No need for the basic/ subdirectory. Move minimal to the top.
* Update TypeScript to 2.5.3.
* Check in lockfiles to ensure repeatability in Travis tests.
This resource provider accepts a single configuration parameter, `testing:provider:module`, that is the path to a Javascript module that implements CRUD operations for a set of resource types. This allows e.g. a test case to provide its own implementation of these operations that may succeed or fail in interesting ways.
Fixes#338.
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
This change runs the examples integration tests for every test
run. They used to be split out because the AWS tests take so long,
but now those are in their own separate package. Running the
integration tests here more frequently will prevent breaking the
most basic Lumi CLI commands and capabilities.
We are renaming Lumi to Pulumi Fabric. This change simply renames the
pulumi/lumi repo to pulumi/pulumi-fabric, without the CLI tools and other
changes that will follow soon afterwards.
Generalizes Lumi program validation so that it can be applied
to integration testing for other packages (such as the
pulumi/lumi-platform package examples).
Disable invocation of `lumi plan` during examples
integration testing, pending resolution of #276 to
support planning in the face of output properties.
Make RestAPI more robust to TooManyRequestsException.
Fix imports in minimal example.
Make printing for examples test more explicit to help with diagnostics during parallel test execution.