Do not fire a "resource outputs" display event for component resources
after their initial registration. Instead, defer this event until the
component's `RegisterResourceOutputs` call arrives.
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This command cancels a stack's currently running update, if any. It can
be used to recover from the scenario in which an update is aborted
without marking the running update as complete. Once an update has been
cancelled, it is likely that the affected stack will need to be repaired
via an pair of export/import commands before future updates can succeed.
This is part of #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
This change introduces support for using the cloud backend when
`pulumi init` has not been run. When this is the case, we use the new
identity model, where a stack is referenced by an owner and a stack
name only.
There are a few things going on here:
- We add a new `--owner` flag to `pulumi stack init` that lets you
control what account a stack is created in.
- When listing stacks, we show stacks owned by you and any
organizations you are a member of. So, for example, I can do:
* `pulumi stack init my-great-stack`
* `pulumi stack init --owner pulumi my-great-stack`
To create a stack owned by my user and one owned by my
organization. When `pulumi stack ls` is run, you'll see both
stacks (since they are part of the same project).
- When spelling a stack on the CLI, an owner can be optionally
specified by prefixing the stack name with an owner name. For
example `my-great-stack` means the stack `my-great-stack` owned by
the current logged in user, where-as `pulumi/my-great-stack` would
be the stack owned by the `pulumi` organization
- `--all` can be passed to `pulumi stack ls` to see *all* stacks you
have access to, not just stacks tied to the current project.
Long term, a stack name alone will not be sufficent to address a
stack. Introduce a new `backend.StackReference` interface that allows
each backend to give an opaque stack reference that can be used across
operations.
To prepare for a world where stack names must be unique across an
owner, add some randomness to the names we use for stacks as part of
our integration tests.
This change removes the need to `pulumi init` when targeting the local
backend. A fair amount of the change lays the foundation that the next
set of changes to stop having `pulumi init` be used for cloud stacks
as well.
Previously, `pulumi init` logically did two things:
1. It created the bookkeeping directory for local stacks, this was
stored in `<repository-root>/.pulumi`, where `<repository-root>` was
the path to what we belived the "root" of your project was. In the
case of git repositories, this was the directory that contained your
`.git` folder.
2. It recorded repository information in
`<repository-root>/.pulumi/repository.json`. This was used by the
cloud backend when computing what project to interact with on
Pulumi.com
The new identity model will remove the need for (2), since we only
need an owner and stack name to fully qualify a stack on
pulumi.com, so it's easy enough to stop creating a folder just for
that.
However, for the local backend, we need to continue to retain some
information about stacks (e.g. checkpoints, history, etc). In
addition, we need to store our workspace settings (which today just
contains the selected stack) somehere.
For state stored by the local backend, we change the URL scheme from
`local://` to `local://<optional-root-path>`. When
`<optional-root-path>` is unset, it defaults to `$HOME`. We create our
`.pulumi` folder in that directory. This is important because stack
names now must be unique within the backend, but we have some tests
using local stacks which use fixed stack names, so each integration
test really wants its own "view" of the world.
For the workspace settings, we introduce a new `workspaces` directory
in `~/.pulumi`. In this folder we write the workspace settings file
for each project. The file name is the name of the project, combined
with the SHA1 of the path of the project file on disk, to ensure that
multiple pulumi programs with the same project name have different
workspace settings.
This does mean that moving a project's location on disk will cause the
CLI to "forget" what the selected stack was, which is unfortunate, but
not the end of the world. If this ends up being a big pain point, we
can certianly try to play games in the future (for example, if we saw
a .git folder in a parent folder, we could store data in there).
With respect to compatibility, we don't attempt to migrate older files
to their newer locations. For long lived stacks managed using the
local backend, we can provide information on where to move things
to. For all stacks (regardless of backend) we'll require the user to
`pulumi stack select` their stack again, but that seems like the
correct trade-off vs writing complicated upgrade code.
This field indicates the schema of the serialized deployment. This field
behaves identically to the `Version` field of
`PatchUpdateCheckpointRequest`.
This is part of pulumi/pulumi-service#1046
And make the deployment an opaque JSON message. The verison field
indicates the schema of the deployment. A missing version field will
behave as if the version was set to `1`. A version of `1` indicates that
the serialized deployment has the `DeploymentV1` schema.
This is part of pulumi/pulumi-service#1046.
This covers most of the transitive closure of the types that appear in a
checkpoint. A breaking change to any of these types implies a bump in
the checkpoint version number.
This is part of pulumi/pulumi-service#1046.
This makes two minor tweaks to the login prompt:
1. Change the text so that it hyperlinks in most terminals, including
iTerm, in a way that doesn't include excess characters.
2. Disable echoing of the token.
A previous change altered the calculation of plugin sizes broke the
ability to install plugins that weren't backed by a directory. This
fixes that by making getPluginSize act correctly for any kind of path.
Due to an interaction between pointers and go's `range` operator, we
would end up always returning the last plugin in a user's plugin
cache, instead of the right value.
We now save the current plugin into a local, so if we end up taking
the address the right thing will happen.
Fixes#1196
* Lift snapshot management out of the engine
This PR is a prerequisite for parallelism by addressing a major problem
that the engine has to deal with when performing parallel resource
construction: parallel mutation of the global snapshot. This PR adds
a `SnapshotManager` type that is responsible for maintaining and
persisting the current resource snapshot. It serializes all reads and
writes to the global snapshot and persists the snapshot to persistent
storage upon every write.
As a side-effect of this, the core engine no longer needs to know about
snapshot management at all; all snapshot operations can be handled as
callbacks on deployment events. This will greatly simplify the
parallelization of the core engine.
Worth noting is that the core engine will still need to be able to read
the current snapshot, since it is interested in the dependency graphs
contained within. The full implications of that are out of scope of this
PR.
Remove dead code, Steps no longer need a reference to the plan iterator that created them
Fixing various issues that arise when bringing up pulumi-aws
Line length broke the build
Code review: remove dead field, fix yaml name error
Rebase against master, provide implementation of StackPersister for cloud backend
Code review feedback: comments on MutationStatus, style in snapshot.go
Code review feedback: move SnapshotManager to pkg/backend, change engine to use an interface SnapshotManager
Code review feedback: use a channel for synchronization
Add a comment and a new test
* Maintain two checkpoints, an immutable base and a mutable delta, and
periodically merge the two to produce snapshots
* Add a lot of tests - covers all of the non-error paths of BeginMutation and End
* Fix a test resource provider
* Add a few tests, fix a few issues
* Rebase against master, fixed merge
We've seen failures in CI where DNS lookups fail which cause our
operations against the service to fail, as well as other sorts of
timeouts.
Add a set of helper methods in a new httputil package that helps us do
retries on these operations, and then update our client library to use
them when we are doing GET requests. We also provide a way for non GET
requests to be retried, and use this when updating a lease (since it
is safe to retry multiple requests in this case).
The RPC provider interface needs a way to convey back to the engine
that a resource being read no longer exists. To do this, we'll return
the ID property that was read back. If it is empty, it means the
resource is gone. If it is non-empty, we expect it to match the input.
We might create an AWS session with one set of credentials, cache it, then
return it when a later caller asked for a session with *different* creds.
Instead, just cache one default session and Copy other sessions from it.
Less important in the CLI, but critical when the engine is used as a library
in a long-running process.
The code that calculated plugin sizes was incorrect; it would show the
total size consumed by all plugins, for each plugin, which is clearly
busted. We should compute each plugin's size from its own directory.
This change skips unknown IDs during read operations. This can happen
when a read is performed using the output property of another resource
during planning. This is intentionally supported via ID being an
Input<ID> and all we need to do for this to work correctly is skip the
actual provider RPC and the runtime will propagate unknown outputs as
usual.
This change lets plugin versions to float in two ways:
1) If a `pulumi plugin install` detects a newer version is available
already, there's no need to download and install the older version.
2) If the engine attempts to load a plugin at a particular version,
if a newer version is available, it will be accepted without error.
As part of this, we permit $PATH to have the final say when determining
which version to accept. That is, it can always override the choice.
Note that I highly suspect, in the limit, that we'll want to stop doing
this for major version incompatibilities. For now, since we don't
envision any such version changes imminently, this will suffice.
This change does three major things:
1. Removes the ability to be logged into multiple clouds at the same
time. Previously, we supported being logged into multiple clouds at
the same time and the CLI would fan out requests and join responses
when needed. In general, this was only useful for Pulumi employees
that wanted run against multiple copies of the service (say production
and staging) but overall was very confusing (for example in the old
world a stack with the same identity could appear twice (since it was
in two backends) which the CLI didn't handle very well).
2. Stops treating the "local" backend as a special thing, from the
point of view of the CLI. Previouly we'd always connect to the local
backend and merge that data with whatever was in clouds we were
connected to. We had gestures like `--local` in `pulumi stack init`
that meant "use the local mode". Instead, to use the local mode now
you run `pulumi login --cloud-url local://` and then you are logged in
the local backend. Since you can only ever be logged into a single
backend, we can remove the `--local` and `--remote` flags from `pulumi
stack init`, it just now requires you to be logged in and creates a
stack in whatever back end you were logged into. When logging into the
local backend, you are not prompted for an access key.
3. Prompt for login in places where you have to log in, if you are not
already logged in.
This change wires up the new Read RPC method in such a manner that
Pulumi programs can invoke it. This is technically not required for
refreshing state programmatically (as in pulumi/pulumi#1081), however
it's a feature we had eons ago and have wanted since (see
pulumi/pulumi#83), and will allow us to write code like
let vm = aws.ec2.Instance.get("my-vm", "i-07043cd97bd2c9cfc");
// use any property from here on out ...
The way this works is simply by bridging the Pulumi program via its
existing RPC connection to the engine, much like Invoke and
RegisterResource RPC requests already do, and then invoking the proper
resource provider in order to read the state. Note that some resources
cannot be uniquely identified by their ID alone, and so an extra
resource state bag may be provided with just those properties required.
This came almost for free (okay, not exactly) and will come in handy as
we start gaining experience with reading live state from resources.
This commit changes two things about our resource model:
* Stop performing Pulumi Engine-side diffing of resource state.
Instead, we defer to the resource plugins themselves to determine
whether a change was made and, if so, the extent of it. This
manifests as a simple change to the Diff function; it is done in
a backwards compatible way so that we continue with legacy diffing
for existing resource provider plugins.
* Add a Read RPC method for resource providers. It simply takes a
resource's ID and URN, plus an optional bag of further qualifying
state, and it returns the current property state as read back from
the actual live environment. Note that the optional bag of state
must at least include enough additional properties for resources
wherein the ID is insufficient for the provider to perform a lookup.
It may, however, include the full bag of prior state, for instance
in the case of a refresh operation.
This is part of pulumi/pulumi#1108.
* Improve the error message arising from missing required configs for
resource providers
If the resource provider that we are speaking to is new enough, it will send
across a list of keys and their descriptions alongside an error
indicating that the provider we are configuring is missing required
config. This commit packages up the list of missing keys into an error
that can be presented nicely to the user.
* Code review feedback: renaming simplification and correcting errors in comments
Tests now target managed stacks instead of local stacks.
The existing logged in user and target backend API are used unless PULUMI_ACCES_TOKEN is defined, in which case tests are run under that access token and against the PULUMI_API backend.
For developer machines, we will now need to be logged in to Pulumi to run tests, and whichever default API backend is logged in (the one listed as current in ~/.pulumi/credentials.json) will be used. If you need to override these, provide PULUMI_ACCESS_TOKEN and possibly PULUMI_API.
For Travis, we currently target the staging service using the Pulumi Bot user.
We have decided to run tests in the pulumi organization. This can be overridden for local testing (or in Travis in the future) by defining PULUMI_API_OWNER_ORGANIZATION and using an access token with access to that organization.
Part of pulumi/home#195.
As part of the new identity model, we're going to use tagging on
stacks to record metadata, let's create a bag for that, as well as a
few well known tag names that map to metadata we know we'll want to set.
This change adds a Pulumi Cloud Console URL at the end of an update
that went through the Pulumi Cloud API. This is very basic, and is
meant to be just the beginning of adding more cross-linking to the
service. I'm still thinking through the phrasing to use here.
* Send structured errors across RPC boundaries
This brings us closer to gRPC best practices where we send structured
errors with error codes across RPC endpoints. The new "rpcerrors"
package can wrap errors from RPC endpoints, so RPC servers can attach
some additional context as to why a request failed.
* Code review feedback:
1. Rename rpcerrors -> rpcerror, better package name
2. Rename RPCError -> Error, RPCErrorCause -> ErrorCause, names
suggested by gometalinter to improve their package-qualified names
3. Fix import organization in rpcerror.go
This endpoint is relatively expensive, as it returns a large amount of
data for each stack (essentially the stack's entire checkpoint). We
currently call this endpoint in a few places that really just need
information about a single stack. In these places we should simply
interact with that stack directly.
After these changes, there is only one call to the `stacks` endpoint on
the startup path: `upgradeConfigurationFiles` loops over all of the
stacks in each backend and attempts to upgrade each stack's
configuration. Once we no longer need to do this we will not be hitting
the `stacks` endpoint on each CLI invocation.
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
We previously locked our dependency on google.golang.org/grpc to 1.7.2 due to issues we had seen on 1.8.x as noted in #701. However, this has prevented us using some other dependencies which require newer grpc. A test in this repo and AWS showed no problems with the latest 1.10.x versions of the library in our tests.
We'll go ahead and remove this constraint and allow grpc to float forward. If we see issues again, we'll use that repro case to investigate an alternative fix in our code.
Resolves#701.
These changes add the API types and cloud backend code necessary to
interact with service-managed stacks (i.e. stacks that do not have
PPC-managed deployments). The bulk of these changes are unremarkable:
the API types are straightforward, as are most of the interactions with
the new APIs. The trickiest bits are token and log management.
During an update to a managed stack, the CLI must continually renew the
token used to authorize the operations on that stack that comprise the
update. Once a token has been renewed, the old token should be
discarded. The CLI supports this by running a goroutine that is
responsible for both periodically renewing the token for an update and
servicing requests for the token itself from the rest of the backend.
In addition to token renewal, log output must be captured and uploaded
to the service during an update to a managed stack. Implementing this in
a reasonable fashion required a bit of refactoring in order to reuse
what already exists for the local backend. Each event-specific `Display`
function was replaced with an equivalent `Render` function that returns
a string rather than writing to a stream. This approach was chosen
primarily to avoid dealing with sheared colorization tags, which would
otherwise require clients to fuse log lines before colorizing. We could
take that approach in the future.
These changes refactor direct interactions with the Pulumi API out of
the cloud backend and into a subpackage, `pkg/backend/cloud/client`.
This package exposes a slightly higher-level API that takes care of
calculating paths, performing HTTP calls, and occasionally wrapping
multiple physical calls into a single logical call (notably the creation
of an update and the upload of its program).
This is primarily intended as preparation for some of the changes
suggested in the feedback for #1067.
We needed to have two types of `UpdateProgramRequest` to serve both newer shapes of Pulumi configuration values as well as the older, untyped version. (The original change was supporting the `ConfigValue` type, which had a flag to indiciate if the configuration value was encrypted or not.)
Now that LM has been migrated to the M10 bits https://github.com/pulumi/home/issues/168 , we can remove this type. (The PR to remove existing references in the `pulumi-service` repo is https://github.com/pulumi/pulumi-service/pull/957.)
Just a nit: It's possible (though, unlikely) that the repo file is
deleted between the call to `os.Stat` and `ioutil.ReadFile`. Instead,
just try to read the file -- if the file doesn't exist,
`ioutil.ReadFile` will return an error that works the same with
`os.IsNotExist(err)` as the error returned from `os.Stat`.
Note: This is a minor issue that I didn't get to for M11 that isn't
required for M11 and would be fine merging for post-M11.
When you specify a template name explicitly (e.g.
`pulumi new typescript`), we'll try to download the template tarball
without first downloading the JSON list of available templates. The JSON
includes a description used when replacing the `${DESCRIPTION}` string
in template files. Since we didn't download the JSON, we won't have a
description, so we fallback to a default value (`"A Pulumi project."`).
This also happens when specifying `--offline` to use an existing
template under `~/.pulumi/templates`; we won't have a description for
the template, so we fallback to a default description. The fallback
value happens to be the same as the description for each of our current
templates, so noone will currently notice an issue.
For M11, I included initial support for a template manifest file where
the description (and any future metadata) could be stored, but didn't go
as far as actually reading the file.
This change makes it so the CLI actually reads the description from the
manifest file (if it exists), otherwise falling back to the default
value as is done currently. Some minor related cleanup is included in
this change.
This change uses the prior checkpoint's deployment manifest to pre-
populate all plugins required to complete the destroy operation. This
allows for subsequent attempts to load a resource's plugin to match the
already-loaded version. This approach obviously doesn't work in a
hypothetical future world where plugins for the same resource provider
are loaded side-by-side, but we already know that.
Also, rename/cleanup a bunch of serialization code.
Also, generate better environment names in the serialized closure code. Thsi code should be much easier to make sense of as hte names will better track to the original names in the user code.
Also, dedupe simple non-capturing functions. This helps ensure we don't spit out N copies of __awaiter (one per file it is declared in).
This takes the existing `apitype.Checkpoint` type and renames it to
`apitype.CheckpointV1` locking in the shape. In addition, we introduce
a `apitype.VersionedCheckpoint` type, which holds a version number and
a json document representing a checkpoint at that version. Now, when
reading a checkpoint, the CLI can determine if it's in a format it
understands, and fail gracefully if it is not.
While the CLI understands the older checkpoint version, it always
writes the newest version format, meaning that if you manage a
fire-and-forget stack with this version of the CLI, it will be
un-readable by previous versions.
Stacks managed by Pulumi.com are not impacted by this change.
Fixes: #887
* Improve error messages output by the CLI
This fixes a couple known issues with the way that we present errors
from the Pulumi CLI:
1. Any errors from RPC endpoints were bubbling up as they were to
the top-level, which was unfortunate because they contained
RPC-specific noise that we don't want to present to the user. This
commit unwraps errors from resource providers.
2. The "catastrophic error" message often got printed twice
3. Fatal errors are often printed twice, because our CLI top-level
prints out the fatal error that it receives before exiting. A lot of
the time this error has already been printed.
4. Errors were prefixed by PU####.
* Feedback: Omit the 'catastrophic' error message and use a less verbose error message as the final error
* Code review feedback: interpretRPCError -> resourceStateAndError
* Code review feedback: deleting some commented-out code, error capitalization
* Cleanup after rebase
This adds a `pulumi new` command which makes it easy to quickly
automatically create the handful of needed files to get started building
an empty Pulumi project.
Usage:
```
$ pulumi new typescript
```
Or you can leave off the template name, and it will ask you to choose
one:
```
$ pulumi new
Please choose a template:
> javascript
python
typescript
```
We were not colorizing a summary in one case. Also, there were
codepaths that would print to the console without first calling
spinner.Reset(), so the spinner would not be cleared from the screen.
When a stack has secrets, we now take the secret values and construct
a regular expression which is just an alternation of all the secret
values. Then, before pushing any string data into an Event, we run the
regular expression and replace all matches with '[secret]'.
Fixes#747
The engine now emits events with richer metadata during the
ResourceOutputs and ResourcePre callbacks. The CLI can then use this
information to decide if it should display the event or not and how
much of the event to display.
Options dealing with what to display and how to display it have moved
into the CLI and the engine now emits all information for each event.
I believe because of the way we have structured the code, it is
impossible to know a resource's parent but not printed it. I've
changed the test which would print the parent resource to an assert
that ensure we have printed it.
The next commit is going to remove the shown array because we no
longer need it, but this commit is here so that if there are display
bugs as part of the larger refactoring in how we display events, we
can bisect back and see this failure.
The `shouldShow` method always marked a step as seen, and having the
side effect there is a little confusing. Because we call shouldShow in
the StepPre, StepPost and Output handlers, its also hard to ensure an
invarant I think we want, which is that in the Post and Output
handlers, we've already seen the event.
So, let's move the marking out of `shouldShow` and into
`OnResourceStepPre` and then assert we've already seen it in
`OnResourceStepPre` and `OnResourceOutputs` handlers.
This means that shouldShow is now a pure function and makes it easier
to move the decision on if we should print information about a step
out of the engine and into the CLI.
As it stands, we allow plugin load requests to race. Not only does this
create a situation in which we may load and then immediately throw away
a plugin (potentially leaking its process), it also creates the
possibility of races when reading from/writing to the various plugin
caches. These changes serialize all plugin loads and cache accesses by
running all accesses for a particular host in a single goroutine.
Fixes#1020.
The engine now unconditionally emits a new type of event, a
PreludeEvent, which contains the configuration for a stack as well as
an indication if the stack is being previewed or updated. The
responsibility for interpreting the --show-config flag on the command
line is now handled by the CLI, which uses this to decide if it should
print the configuration or not, and then writes the "Previewing
changes" or "Deploying chanages" header.
This value was unused across all of our display code. We did thread it
everywhere, but we never actually used the value to make any
decisions. Since we want to move to a model where the engine does not
decide *what* to display, it's helpful to remove this policy stuff
anyway.
This helper method is only really used for testing, but we should not
allow it to create a Key who's namespace has a colon (as ParseKey
would not build something like this).
This API was introduced to aid the refactoring, but it isn't something
we want to support long term. Remove it and for a few places, push
passing config.Key around more, instead of converting to the old type
eagerly.
When serializing config.Key's we now write them as <package>:<name>
instead of <package>:config:<name>. We continue to support reading the
older format for compatability with older files.
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
I'll be changing the structure of the representation of config.Key, so
let's write some tests first to ensure we can continue to treat
everything as JSON and YAML.
Right now, config.Key is a type alias for tokens.ModuleMember. I did a
pass over the codebase such that we use config.Key everywhere it
looked like the value did not leak to some external process (e.g a
resource provider or a langhost).
Doing this makes it a little clearer (hopefully) where code is
depending on a module member structure (e.g. <package>:config:<value>)
instead of just an opaque type.
The change to refactor out where we store configuration data broke our
old strategy, which we discovered when we tried to take this payload
into pulumi-aws.
As it stands, we only configure those providers for which configuration
is present. This can lead to surprising failure modes if those providers
are then used to create resources. These changes ensure that all
resource providers that are not configured during plan initialization
are configured upon first load.
Fixes#758.
By using untyped deployment structures via `json.RawMessage`, we can
support round-tripping between old CLI clients and newer servers, without
dropping possibly-important information on the floor. I hadn't realized
this design goal with the original system, and after talking to @pgavlin,
I better realized the intent and that we want to preserve this.
The filenames we used to store history data locally only had second
level precision. On my machine, the test history test is able to run
multiple `pulumi update` commands in the same second, which causes a
newer history file to overwrite an older one.
This change moves to using a nanosecond precision timestamp when
writing config. In addition, the CLI was trying to sort the updates
that came back from the backend (instead of just trusting them to be
in newest first order, as we documented) so I removed that code as
well.
Make many fixes to closure serialization
Primary things that i've done as part of this change:
Added support for cyclic objects.
Properly serialize objects that are shared across different function. previously you would get multiple copies, now you properly reference the same copy.
Remove the usages of 'hashes' for functions. Because we track identity of objects, we no longer need them.
Serialize properties of functions (if they have any).
Handle Objects/Functions with different __proto__s than normal. i.e. classes/constructors. but also anything the user may have done themselves to the object.
Handle generator functions.
Handle functions with 'computed' names.
Handle functions with 'symbol' names.
Handle serializing Promises as Promises.
Removed the dual Closure/AsyncClosure tree. One existed solely so we could have a tree without promises (for use in testing maybe?). Because this all exists in a part of our codebase that is entirely async, it's fine to have promises in the tree, and to await them when serializing the Closure to a string.
Handle serializing class-constructors and methods. Including properly handling 'super' calls.
A hold-over from a previous experiment (LumiIDL) which we don't use
anymore. If we decide to bring that back, we can easily restore these
types, but for now, let's just remove this dead code.
Most of the errors in this package are holdovers from our previous
syetem where we had our own custom compiler and evaluator and are no
longer needed. The few we still use during plan applicaton (via the
diagnostics system, which is another component from the old system
that we still use) have been promoted into the diag package. Doing so,
allows us to not have to import "github.com/pkg/errors" as "goerr" in
some parts of the engine, a nice cleaup.
Migrate configuration from the old model to the new model. The
strategy here is that when we first run `pulumi` we enumerate all of
the stacks from all of the backends we know about and for each stack
get the configuration values from the project and workspace and
promote them into the new file. As we do this, we remove stack
specific config from the workspace and Pulumi.yaml file.
If we are able to upgrade all the stacks we know about, we delete all
global configuration data in the workspace and in Pulumi.yaml as well.
We have a test that ensures upgrades continue to work.
This change updates our configuration model to make it simpler to
understand by removing some features and changing how things are
persisted in files.
Notable changes:
- We've removed the notion of "workspace" vs "project"
config. Now, configuration is always stored in a file next to
`Pulumi.yaml` named `Pulumi.<stack-name>.yaml` (the same file we'd
use for an other stack specific information we would need to persist
in the future).
- We've removed the notion of project wide configuration. Every new
stack gets a completely empty set of configuration and there's no
way to share common values across stacks, instead the common value
has to be set on each stack.
We retain some of the old code for the configuration system so we can
support upgrading a project in place. That will happen with the next
change.
This change fixes some issues and allows us to close some
others (since they are no longer possible).
Fixes#866Closes#872Closes#731
We are going to be changing the configuration model. To begin, let's
take most of the existing stuff and mark it as "deprecated" so we can
keep the existing behavior (to help transition newer code forward)
while making it clear what APIs should not be called in the
implementation of `pulumi` itself.
Despite our good progress moving towards having an apitype package,
where our exchange types live and can be shared among the engine and
our services, there were a few major types that were still duplciated.
Resource was the biggest example -- and indeed, the apitype varirant
was missing the new Dependencies property -- but there were others,
like Manfiest, PluginInfo, etc. These too had semi-random omissions.
This change merges all of these types into the apitype package. This
not only cleans up the redundancy and missing properties, but will
"force the issue" with respect to keeping them in sync and properly
versioning the information in a backwards compatible way.
The resource/stack package still exists as a simple marshaling layer
to and from the engine's core data types.
Finally, I've made the controversial change to share the actual
Deployment data structure at the apitype layer also. This will force
us to confront differences in that data structure similarly, and will
allow us to leverage the strong typing throughout to catch issues.
Previously, we would prefer a plugin on the $PATH which is more or
less always the case for people hacking on `pulumi`. Later, when we
went to check the loaded plugin version matched the one we requested,
we fail.
Now, if we have a version, we'll first consult the local plugin
cache. If that fails, we'll fall back to the $PATH as we used to.
When we are loading a plugin without a version, we continue to use the
one on the $PATH (without testing the cache) on the assumption it is
newer.
In addition, we've turned the "plugin versions are mis-matched" from
an error into a warning. We expect that we'll only ever see this
warning when something strange is going on (since in the normal case,
we'll have found the exact version in the cache) but having it not
hard fail does help in development cases.
Fixes#977
The spinner code used \b, but didn't overwrite with spaces, so part
of the message could get left behind when other writes to stdout/err
occurred. This change simply overwrites characters with spaces.
This change gets enough of the Python SDK up and running that the
empty Python program will work. Mostly just scaffolding, but the
basic structure is now in place. The primary remaining work is to
wire up resource creation to the gRPC interfaces.
In summary:
* The basic structure is as follows:
- Everything goes into sdk/python/.
- sdk/python/cmd/pulumi-langhost-python is a Go language host
that simply knows how to spawn Python processes to run out
entrypoint in response to requests by the engine.
- sdk/python/cmd/pulumi-langhost-python-exec is a little Python
shim that is invoked by the language host to run Python programs,
and is responsible for setting up the minimal goo before we can
do so (RPC connections and the like).
- sdk/python/lib/ contains a Python Pip package suitable for PyPi.
- In there, we have two packages: the root pulumi package that
contains all of the basic Pulumi programming model abstractions,
and pulumi.runtime, which contains the implementation of
resource registration, RPC interfacing with the engine, and so on.
* Add logic in our test framework to conditionalize on the language
type and react accordingly. This will allow us to skip Yarn for
Python projects and eventually run Pip if there's a requirements.txt.
* Created the basic project structure, including all of the usual
Make targets for installing into the proper places.
* Building also runs Pylint and we are clean.
There are a few other minor things in here:
* Add an "empty" test for both Node.js and Python. These pass.
* Fix an existing bug in plugin shutdown logic. At some point, we
started waiting for stderr/stdout to flush before shutting down
the plugin; but if certain failures happen "early" during the
plugin launch process, these channels will never get initialized
and so waiting for them deadlocks.
* Recently we seem to have added logic to delete test temp
directories if a failure happened during initialization of said
temp directories. This is unfortunate, because you often need to
look at the temp directory to see what failed. We already clean
them up elsewhere after the full test completes successfully, so
I don't think we need to be doing this, and I've removed it.
Still many loose ends (config, resources, etc), but it's a start!
This change adds a basic Python langhost RPC server. It's fairly
barebones and merely acts as a jumping off point for the Pulumi engine
to spawn a Python program. The host is written in Go, in contrast to
implementing the host in Python, and more closely resembles how I
expect the Node.js language host to work once pulumi/pulumi#331 is done.
1. Output different-colored edges for parent-child resource
relationships
2. Allow the changing of edge colors via command-line parameters
3. Allow the skipping of the parent-child graph or the
dependency graph when calculating all edges
This modifies the Graph interface slightly to allow an edge to specify
what color should be used when drawing it.
1. Various idiomatic Go and TypeScript fixes
2. Add an integration test that end-to-end roundtrips dependency
information for a simple Pulumi program
3. Add an additional test assert that tests that dependency information
comes from the language host as expected
Some file systems do not record BithTimes and BirthTime panics in
these cases. We use HasBirthTimes to guard against this and print n/a
when we do not have a BirthTime.
