Do not fire a "resource outputs" display event for component resources
after their initial registration. Instead, defer this event until the
component's `RegisterResourceOutputs` call arrives.
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
* Lift snapshot management out of the engine
This PR is a prerequisite for parallelism by addressing a major problem
that the engine has to deal with when performing parallel resource
construction: parallel mutation of the global snapshot. This PR adds
a `SnapshotManager` type that is responsible for maintaining and
persisting the current resource snapshot. It serializes all reads and
writes to the global snapshot and persists the snapshot to persistent
storage upon every write.
As a side-effect of this, the core engine no longer needs to know about
snapshot management at all; all snapshot operations can be handled as
callbacks on deployment events. This will greatly simplify the
parallelization of the core engine.
Worth noting is that the core engine will still need to be able to read
the current snapshot, since it is interested in the dependency graphs
contained within. The full implications of that are out of scope of this
PR.
Remove dead code, Steps no longer need a reference to the plan iterator that created them
Fixing various issues that arise when bringing up pulumi-aws
Line length broke the build
Code review: remove dead field, fix yaml name error
Rebase against master, provide implementation of StackPersister for cloud backend
Code review feedback: comments on MutationStatus, style in snapshot.go
Code review feedback: move SnapshotManager to pkg/backend, change engine to use an interface SnapshotManager
Code review feedback: use a channel for synchronization
Add a comment and a new test
* Maintain two checkpoints, an immutable base and a mutable delta, and
periodically merge the two to produce snapshots
* Add a lot of tests - covers all of the non-error paths of BeginMutation and End
* Fix a test resource provider
* Add a few tests, fix a few issues
* Rebase against master, fixed merge
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
This change uses the prior checkpoint's deployment manifest to pre-
populate all plugins required to complete the destroy operation. This
allows for subsequent attempts to load a resource's plugin to match the
already-loaded version. This approach obviously doesn't work in a
hypothetical future world where plugins for the same resource provider
are loaded side-by-side, but we already know that.
Also, rename/cleanup a bunch of serialization code.
Also, generate better environment names in the serialized closure code. Thsi code should be much easier to make sense of as hte names will better track to the original names in the user code.
Also, dedupe simple non-capturing functions. This helps ensure we don't spit out N copies of __awaiter (one per file it is declared in).
* Improve error messages output by the CLI
This fixes a couple known issues with the way that we present errors
from the Pulumi CLI:
1. Any errors from RPC endpoints were bubbling up as they were to
the top-level, which was unfortunate because they contained
RPC-specific noise that we don't want to present to the user. This
commit unwraps errors from resource providers.
2. The "catastrophic error" message often got printed twice
3. Fatal errors are often printed twice, because our CLI top-level
prints out the fatal error that it receives before exiting. A lot of
the time this error has already been printed.
4. Errors were prefixed by PU####.
* Feedback: Omit the 'catastrophic' error message and use a less verbose error message as the final error
* Code review feedback: interpretRPCError -> resourceStateAndError
* Code review feedback: deleting some commented-out code, error capitalization
* Cleanup after rebase
When a stack has secrets, we now take the secret values and construct
a regular expression which is just an alternation of all the secret
values. Then, before pushing any string data into an Event, we run the
regular expression and replace all matches with '[secret]'.
Fixes#747
The engine now emits events with richer metadata during the
ResourceOutputs and ResourcePre callbacks. The CLI can then use this
information to decide if it should display the event or not and how
much of the event to display.
Options dealing with what to display and how to display it have moved
into the CLI and the engine now emits all information for each event.
I believe because of the way we have structured the code, it is
impossible to know a resource's parent but not printed it. I've
changed the test which would print the parent resource to an assert
that ensure we have printed it.
The next commit is going to remove the shown array because we no
longer need it, but this commit is here so that if there are display
bugs as part of the larger refactoring in how we display events, we
can bisect back and see this failure.
The `shouldShow` method always marked a step as seen, and having the
side effect there is a little confusing. Because we call shouldShow in
the StepPre, StepPost and Output handlers, its also hard to ensure an
invarant I think we want, which is that in the Post and Output
handlers, we've already seen the event.
So, let's move the marking out of `shouldShow` and into
`OnResourceStepPre` and then assert we've already seen it in
`OnResourceStepPre` and `OnResourceOutputs` handlers.
This means that shouldShow is now a pure function and makes it easier
to move the decision on if we should print information about a step
out of the engine and into the CLI.
The engine now unconditionally emits a new type of event, a
PreludeEvent, which contains the configuration for a stack as well as
an indication if the stack is being previewed or updated. The
responsibility for interpreting the --show-config flag on the command
line is now handled by the CLI, which uses this to decide if it should
print the configuration or not, and then writes the "Previewing
changes" or "Deploying chanages" header.
This value was unused across all of our display code. We did thread it
everywhere, but we never actually used the value to make any
decisions. Since we want to move to a model where the engine does not
decide *what* to display, it's helpful to remove this policy stuff
anyway.
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
Right now, config.Key is a type alias for tokens.ModuleMember. I did a
pass over the codebase such that we use config.Key everywhere it
looked like the value did not leak to some external process (e.g a
resource provider or a langhost).
Doing this makes it a little clearer (hopefully) where code is
depending on a module member structure (e.g. <package>:config:<value>)
instead of just an opaque type.
As it stands, we only configure those providers for which configuration
is present. This can lead to surprising failure modes if those providers
are then used to create resources. These changes ensure that all
resource providers that are not configured during plan initialization
are configured upon first load.
Fixes#758.
Make many fixes to closure serialization
Primary things that i've done as part of this change:
Added support for cyclic objects.
Properly serialize objects that are shared across different function. previously you would get multiple copies, now you properly reference the same copy.
Remove the usages of 'hashes' for functions. Because we track identity of objects, we no longer need them.
Serialize properties of functions (if they have any).
Handle Objects/Functions with different __proto__s than normal. i.e. classes/constructors. but also anything the user may have done themselves to the object.
Handle generator functions.
Handle functions with 'computed' names.
Handle functions with 'symbol' names.
Handle serializing Promises as Promises.
Removed the dual Closure/AsyncClosure tree. One existed solely so we could have a tree without promises (for use in testing maybe?). Because this all exists in a part of our codebase that is entirely async, it's fine to have promises in the tree, and to await them when serializing the Closure to a string.
Handle serializing class-constructors and methods. Including properly handling 'super' calls.
Most of the errors in this package are holdovers from our previous
syetem where we had our own custom compiler and evaluator and are no
longer needed. The few we still use during plan applicaton (via the
diagnostics system, which is another component from the old system
that we still use) have been promoted into the diag package. Doing so,
allows us to not have to import "github.com/pkg/errors" as "goerr" in
some parts of the engine, a nice cleaup.
This adds support for two things:
* Installing all plugins that a project requires with a single command:
$ pulumi plugin install
* Listing the plugins that this project requires:
$ pulumi plugin ls --project
$ pulumi plugin ls -p
This brings back the Node.js language plugin's GetRequiredPlugins
function, reimplemented in Go now that the language host has been
rewritten from JavaScript. Fairly rote translation, along with
some random fixes required to get tests passing again.
This change implements the Node.js language host's GetRequiredPlugins
function. This merely scans all node_modules/*/package.json files in
the program directory, looking for those that have associated plugins.
It returns a list of any found along with their version numbers.
This change adds a GetRequiredPlugins RPC method to the language
host, enabling us to query it for its list of plugin requirements.
This is language-specific because it requires looking at the set
of dependencies (e.g., package.json files).
It also adds a call up front during any update/preview operation
to compute the set of plugins and require that they are present.
These plugins are populated in the cache and will be used for all
subsequent plugin-related operations during the engine's activity.
We now cache the language plugins, so that we may load them
eagerly too, which we never did previously due to the fact that
we needed to pass the monitor address at load time. This was a
bit bizarre anyhow, since it's really the Run RPC function that
needs this information. So, to enable caching and eager loading
-- which we need in order to invoke GetRequiredPlugins -- the
"phone home" monitor RPC address is passed at Run time.
In a subsequent change, we will switch to faulting in the plugins
that are missing -- rather than erroring -- in addition to
supporting the `pulumi plugin install` CLI command.
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
The existing logic would flow colorization information into the
engine, so depending on the settings in the CLI, the engine may or may
not have emitted colorized events. This coupling is not great and we
want to start moving to a world where the presentation happens
exclusively at the CLI level.
With this change, the engine will always produce strings that have the
colorization formatting directives (i.e. the directives that
reconquest/loreley understands) and the CLI will apply
colorization (which could mean either running loreley to turn the
directives into ANSI escape codes, or drop them or retain them, for
debuging purposes).
Fixes#742
If we do not do this, the engine will assume that it should elide
unknown input/output properties when interacting with the language
and resource providers and we will produce unexpected results.
This PR adds a new `pulumi history` command, which prints the update history for a stack.
The local backend stores the update history in a JSON file on disk, next to the checkpoint file. The cloud backend simply provides the update metadata, and expects to receive all the data from a (NYI) `/history` REST endpoint.
`pkg/backend/updates.go` defines the data that is being persisted. The way the data is wired through the system is adding a new `backend.UpdateMetadata` parameter to a Stack/Backend's `Update` and `Destroy` methods.
I use `tests/integration/stack_outputs/` as the simple app for the related tests, hence the addition to the `.gitignore` and fixing the name in the `Pulumi.yaml`.
Fixes#636.