* Make `async:true` the default for `invoke` calls (#3750)
* Switch away from native grpc impl. (#3728)
* Remove usage of the 'deasync' library from @pulumi/pulumi. (#3752)
* Only retry as long as we get unavailable back. Anything else continues. (#3769)
* Handle all errors for now. (#3781)
* Do not assume --yes was present when using pulumi in non-interactive mode (#3793)
* Upgrade all paths for sdk and pkg to v2
* Backport C# invoke classes and other recent gen changes (#4288)
Adjust C# generation
* Replace IDeployment with a sealed class (#4318)
Replace IDeployment with a sealed class
* .NET: default to args subtype rather than Args.Empty (#4320)
* Adding system namespace for Dotnet code gen
This is required for using Obsolute attributes for deprecations
```
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'ObsoleteAttribute' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
Iam/InstanceProfile.cs(142,10): error CS0246: The type or namespace name 'Obsolete' could not be found (are you missing a using directive or an assembly reference?) [/Users/stack72/code/go/src/github.com/pulumi/pulumi-aws/sdk/dotnet/Pulumi.Aws.csproj]
```
* Fix the nullability of config type properties in C# codegen (#4379)
The initial config represents any config that was specified programmatically to the Policy Pack, for Policy Packs that support programmatic configuration like AWSGuard.
The text "Plan applied failed: " is pretty inscrutable given our
current system. While both "plan" and "apply" are concepts inside the
the implementation of the CLI, we usually talk in terms of `preview`
and `update`. I suspect there are some cases where this prefix is not
100% technically correct, and if there's a better short way of saying
something more correct, I would love to adopt that instead, but as is,
I would really love to get rid of the "Plan apply failed" text in our
system, it pains me every time I read it.
- If an untargeted create would not affect the inputs of any targeted
resources, do not fail the update. Untargeted creates that are
directly dependend on by targeted resources will still cause failures
that inform the user to add the untargeted resources to the --target
list.
- Users may now pass the `--target-dependents` flag to allow targeted
destroys to automatically target dependents that must be destroyed in
order to destroy an explicitly targeted resource.
Allow the user to specify a set of resources to replace via the
`--replace` flag on the CLI. This can be combined with `--target` to
replace a specific set of resources without changing any other
resources. `--target-replace` is shorthand for `--replace urn --target urn`.
Fixes#2643.
This avoids unnecessary blocking inside pre/post-step callbacks if the
reader on the other side of the event channel is slow.
We do not use a buffered channel in the event pipe because it is
empirically less likely that the goroutine reading from a buffered
channel will be scheduled when new data is placed in the channel. In the
case of our event system in which events will not be delivered to the
service and display until the copying goroutine is scheduled, this can
lead to unacceptable delay between the send of the original event and
its output.
This matches the behavior of the display logic, which does not consider
reads to be changes. This also matches the expectation of tests that
pass `--expect-no-changes` (and likely user intuition).
Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
Previously, when the CLI wanted to install a plugin, it used a special
method, `DownloadPlugin` on the `httpstate` backend to actually fetch
the tarball that had the plugin. The reason for this is largely tied
to history, at one point during a closed beta, we required presenting
an API key to download plugins (as a way to enforce folks outside the
beta could not download them) and because of that it was natural to
bake that functionality into the part of the code that interfaced with
the rest of the API from the Pulumi Service.
The downside here is that it means we need to host all the plugins on
`api.pulumi.com` which prevents community folks from being able to
easily write resource providers, since they have to manually manage
the process of downloading a provider to a machine and getting it on
the `$PATH` or putting it in the plugin cache.
To make this easier, we add a `--server` argument you can pass to
`pulumi plugin install` to control the URL that it attempts to fetch
the tarball from. We still have perscriptive guidence on how the
tarball must be
named (`pulumi-[<type>]-[<provider-name>]-vX.Y.Z.tar.gz`) but the base
URL can now be configured.
Folks publishing packages can use install scripts to run `pulumi
plugin install` passing a custom `--server` argument, if needed.
There are two improvements we can make to provide a nicer end to end
story here:
- We can augment the GetRequiredPlugins method on the language
provider to also return information about an optional server to use
when downloading the provider.
- We can pass information about a server to download plugins from as
part of a resource registration or creation of a first class
provider.
These help out in cases where for one reason or another where `pulumi
plugin install` doesn't get run before an update takes place and would
allow us to either do the right thing ahead of time or provide better
error messages with the correct `--server` argument. But, for now,
this unblocks a majority of the cases we care about and provides a
path forward for folks that want to develop and host their own
resource providers.
`pulumi query` is designed, essentially, as a souped-up `exec`. We
execute a query program, and add a few convenience constructs (e.g., the
default providers that give you access to things like `getStack`).
Early in the design process, we decided to not re-use the `up`/update
path, both to minimize risk to update operations, and to simplify the
implementation.
This commit will add this "parallel query universe" into the engine
package. In particular, this includes:
* `QuerySource`, which executes the language provider running the query
program, and providing it with some simple constructs, such as the
default provider, which provides access to `getStack`. This is much
like a very simplified `EvalSource`, though notably without any of the
planning/step execution machinery.
* `queryResmon`, which disallows all resource operations, except the
`Invoke` that retrieves the resource outputs of some stack's last
snapshot. This is much like a simplified `resmon`, but without any of
the provider resolution, and without and support for resource
operations generally.
* Various static functions that pull together miscellaneous things
needed to execute a query program. Notably, this includes gathering
language plugins.
* Load default providers deterministically
This commit adds a new algorithm for deriving a list of default
providers from the set of plugins reported from the language host and
from the snapshot. If the language host reports a set of plugins,
default providers are sourced directly from that set, otherwise default
providers are sourced from the full set of plugins, including ones from
the snapshot.
When multiple versions of the same provider are requested, the newest
version of that provider is always select as the default provider.
* Add CHANGELOG.md entry
* Skip the language host's plugins if it reports no resource plugins
* CR feedback
* CR: Log when skipping non resource plugin
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
Whenever an update fails partially, it gives the engine back some state
bag of outputs that should be persisted to the snapshot. When saving
this state, we shouldn't save the inputs that triggered the update that
failed, since the resource that exists will never have been updated
successfully with those inputs.
Instead of saving the new inputs on partial failed updates, this commit
saves the old inputs and the new outputs. The new outputs will likely
need to be refreshed to be useful, but the old inputs will be correct
from the perpsective of the Pulumi program that generated the last
successful update.
Fixespulumi/pulumi#2011
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
* Show a better error message when decrypting fails
It is most often the case that failing to decrypt a secret implies that
the secret was transferred from one stack to another via copying the
configuration. This commit introduces a better error message for this
case and instructs users to explicitly re-encrypt their encrypted keys
in the context of the new stack.
* Spelling
* CR: Grammar fixes
The belief is that this hides some complexity that we shouldn't be
exposing in the default case.
In order to filter these events from both the diff/progress display
and the resource change summary, we perform this filtering in
`pkg/engine`.
Fixes#1733.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
