The provider registry was checking for a `nil` provider instance before
checking for a non-nil error. This caused the CLI to fail to report
important errors during the plugin load process (e.g. invalid checkpoint
errors) and instead report a failure to find a matching plugin.
Some providers (namely Kubernetes) require unbounded parallelism in
order to function correctly. This commit enables the engine to operate
in a mode with unbounded parallelism and switches to that mode by
default.
The preview will proceed as if the operations had not been issued (i.e.
we will not speculate on a new state for the stack). This is consistent
with our behavior prior to the changes that added pending operations to
the checkpoint.
* Process deletions conservatively in parallel
This commit allows the engine to conservatively delete resources in
parallel when it is sure that it is legal to do so. In the absence of a
true data-flow oriented step scheduler, this approach provides a
significant improvement over the existing serial deletion mechanism.
Instead of processing deletes serially, this commit will partition the
set of condemned resources into sets of resources that are known to be
legally deletable in parallel. The step executor will then execute those
independent lists of steps one-by-one until all steps are complete.
* CR: Make ResourceSet a normal map
* Only use the dependency graph if we can trust it
* Reverse polarity of pendingDeletesAreReplaces
* CR: un-export a few types
* CR: simplify control flow in step generator when scheduling
* CR: parents are dependencies, fix loop index
* CR: Remove ParentOf, add new test for parent dependencies
Recently, we eliminated bright black text, which IMHO makes the
"same" lines really stand out more than we want them to. This is
partly just due to the heavyweight nature of the "*" character,
which we precede every line with. This has the effect of making it
toughter to scan the update to see what's going to happen. The goal
of SpecUnimportant (bright black) was that we wanted to draw less
attention to certain elements of the CLI text -- and have them fade
into the background (apparently it was too successful at this ;-))
So, this change eliminates the "*" prefix for same operations
altogether. It reads better to my eyes and keeps the original intent.
* Retire pending deletions at start of plan
Instead of letting pending deletions pile up to be retired at the end of
a plan, this commit eagerly disposes of any pending deletions that were
pending at the end of the previous plan. This is a nice usability win
and also reclaims an invariant that at most one resource with a given
URN is live and at most one is pending deletion at any point in time.
* Rebase against master
* Fix a test issue arising from shared snapshots
* CR feedback
* plan -> replacement
* Use ephemeral statuses to communicate deletions
We signal provider cancellation by hangning a goroutine off of the plan
executor's parent context. To ensure clean shutdown, this goroutine also
listens on a channel that closes once the plan has finished executing.
Unfortunately, we were closing this channel too early, and the close was
racing with the cancellation signal. These changes ensure that the
channel closes after the plan has fully completed.
Fixes#1906.
Fixespulumi/pulumi-kubernetes#185.
* Validate type tokens before using them
When registering or reading a resource, we take the type token given to
us from the language host and assume that it's valid, which resulted in
assertion failures in various places in the engine. This commit
validates the format of type tokens given to us from the language host
and issues an appropriate error if it's not valid.
Along the way, this commit also improves the way that fatal exceptions
are rendered in the Node language host.
* Pre-allocate an exception for ReadResource
* Fix integration test
* CR Feedback
This commit is a lower-impact change that fixes the bugs associated with
invalid types on component resources and only checks that a type is
valid on custom resources.
* CR Take 2: Fix up IsProviderType instead of fixing call sites
* Please gometalinter
* Introduce Result type to engine
The Result type can be used to signal the failure of a computation due
to both internal and non-internal reasons. If a computation failed due
to an internal error, the Result type carries that error with it and
provides it when the 'Error' method on a Result is called. If a
computation failed gracefully, but wished to bail instead of continue a
doomed plan, the 'Error' method provides a value of null.
* CR feedback
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
- Create all refresh steps before issuing any. This is important as the
state update loop expects all steps to exist.
- Check for cancellation later in the refresher.
This also fixes races in the SnapshotManager and the test journal that
could cause panics during cancellation.
This commit will greatly improve the experience of dealing with partial
failures by simply re-trying to initialize the relevant resources on
every subsequent `pulumi up`, instead of printing a list of reasons the
resource had previously failed to initialize.
As motivation, consider our behavior in the following common, painful
scenario:
* The user creates a `Service` and a `Deployment`.
* The `Pod`s in the `Deployment` fail to become live. This causes the
`Service` to fail, since it does not target any live `Pod`s.
* The user fixes the `Deployment`. A run of `pulumi up` sees the
`Pod`s successfully initialize.
* Users will expect that the `Service` is now in a state of success,
as the `Pod`s it targets are alive. But, because we don't update the
`Service` by default, it perpetually exists in a state of error.
* The user is now required to change some trivial feature of the
`Service` just to trigger an update, so that we can see it succeed.
There are many situations like this. Another very common one is waiting
for test `Pod`s that are meant to successfully complete when some object
becomes live.
By triggering an empty update step for all resources that have any
initialization errors, we avoid all problems like this.
This commit will implement this empty-update semantics for partial
failures, as well as fix the display UX to correctly render the diff in
these cases.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
These changes simplify a couple aspects of plan execution in the hopes of
clarifying some responsibilities and preparing the code for changes to the
implementation of refresh.
1. All aspects of plan execution are now managed by the plan executor,
which is no longer exported. Instead, it is abstracted behind
`Plan.Execute`.
2. The plan executor's error-handling and reporting have been unified
and simplified somewhat.
* Log errors coming from the language host
Similar to pulumi/pulumi#1762, fixespulumi/pulumi#1775. The language
host can fail without issuing any diagnostics and it is very unclear
what happens if the engine does not log the error.
* CR feedback
1. 'readID' was never assigned to and was always the default value,
leading the refresh source to believe a resource was deleted
2. The refresh source could hang when a resource is deleted.
The plan executor assumed that the step generator was responsible for
logging its own diagnostics, which it sort-of is but also doesn't log a
majority of the diagnositcs that come out of it. This commit logs all
errors coming out of step generation so that we don't unintentionally
drop errors.
* Add a list of in-flight operations to the deployment
This commit augments 'DeploymentV2' with a list of operations that are
currently in flight. This information is used by the engine to keep
track of whether or not a particular deployment is in a valid state.
The SnapshotManager is responsible for inserting and removing operations
from the in-flight operation list. When the engine registers an intent
to perform an operation, SnapshotManager inserts an Operation into this
list and saves it to the snapshot. When an operation completes, the
SnapshotManager removes it from the snapshot. From this, the engine can
infer that if it ever sees a deployment with pending operations, the
Pulumi CLI must have crashed or otherwise abnormally terminated before
seeing whether or not an operation completed successfully.
To remedy this state, this commit also adds code to 'pulumi stack
import' that clears all pending operations from a deployment, as well as
code to plan generation that will reject any deployments that have
pending operations present.
At the CLI level, if we see that we are in a state where pending
operations were in-flight when the engine died, we'll issue a
human-friendly error message that indicates which resources are in a bad
state and how to recover their stack.
* CR: Multi-line string literals, renaming in-flight -> pending
* CR: Add enum to apitype for operation type, also name status -> type for clarity
* Fix the yaml type
* Fix missed renames
* Add implementation for lifecycle_test.go
* Rebase against master
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
* Emit reads for external resources when refreshing
Fixespulumi/pulumi#1744. This commit educates the refresh source about
external resources. If a refresh source encounters a resource with the
External bit set, it'll send a Read event to the engine and the engine
will process it accordingly.
* CR: save last event channel instead of last event, style fixes
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
This is consistent with the behavior prior to the introduction of Read
steps. In order to avoid a breaking change we must do this check in the
engine itself, which causes a bit of a layering violation: because IDs
are marshaled as raw strings rather than PropertyValues, the engine must
check against the marshaled form of an unknown directly (i.e.
`plugin.UnknownStringValue`).
When calculating deletes, we will only issue a single delete step for a
particular URN. This is incorrect in the presence of pending deletes
that share URNs with a live resource if the pending deletes follow the
live resource in the checkpoint: instead of issuing a delete for
every resource with a particular URN, we will only issue deletes for
the pending deletes.
Before first-class providers, this was mostly benigin: any remaining
resources could be deleted by re-running the destroy. With the
first-class provider changes, however, the provider for the undeleted
resources will be deleted, leaving the checkpoint in an invalid state.
These changes fix this issue by allowing the step generator to issue
multiple deletes for a single URN and add a test for this scenario.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Execute chains of steps in parallel
Fixespulumi/pulumi#1624. Since register resource steps are known to be
ready to execute the moment the engine sees them, we can effectively
parallelize all incoming step chains. This commit adds the machinery
necessary to do so - namely a step executor and a plan executor.
* Remove dead code
* CR: use atomic.Value to be explicit about what values are atomically loaded and stored
* CR: Initialize atomics to 'false'
* Add locks around data structures in event callbacks
* CR: Add DegreeOfParallelism method on Options and add comment on select in Execute
* CR: Use context.Context for cancellation instead of cancel.Source
* CR: improve cancellation
* Rebase against master: execute read steps in parallel
* Please gometalinter
* CR: Inline a few methods in stepExecutor
* CR: Feedback and bug fixes
1. Simplify step_executor.go by 'bubbling' up errors as far as possible
and reporting diagnostics and cancellation in one place
2. Fix a bug where the CLI claimed that a plan was cancelled even if it
wasn't (it just has an error)
* Comments
* CR: Add comment around problematic select, move workers.Add outside of goroutine, return instead of break
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
* Protobuf changes to record dependencies for read resources
* Add a number of tests for read resources, especially around replacement
* Place read resources in the snapshot with "external" bit set
Fixespulumi/pulumi#1521. This commit introduces two new step ops: Read
and ReadReplacement. The engine generates Read and ReadReplacement steps
when servicing ReadResource RPC calls from the language host.
* Fix an omission of OpReadReplace from the step list
* Rebase against master
* Transition to use V2 Resources by default
* Add a semantic "relinquish" operation to the engine
If the engine observes that a resource is read and also that the
resource exists in the snapshot as a non-external resource, it will not
delete the resource if the IDs of the old and new resources match.
* Typo fix
* CR: add missing comments, DeserializeDeployment -> DeserializeDeploymentV2, ID check
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit begins the process of allowing our CLI to report this by
storing a list of initialization errors in the checkpoint.
* Work around a potentially bad assert in the engine
The engine asserts if presented with a plan that deletes the same URN
more than once. This has been empirically proven to be possible, so I am
removing the assert.
* CR: Add log for multiple pending-delete deletes
* [Parallelism] Introduce a "step generator" component by refactoring all
step generation logic out of PlanIterator
* CR: remove dead fields on PlanIterator
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
* Delete Before Create
This commit implements the full semantics of delete before create. If a
resource is replaced and requires deletion before creation, the engine
will use the dependency graph saved in the snapshot to delete all
resources that depend on the resource being replaced prior to the
deletion of the resource to be replaced.
* Rebase against master
* CR: Simplify the control flow in makeRegisterResourceSteps
* Run Check on new inputs when re-creating a resource
* Fix an issue where the planner emitted benign but incorrect deletes of DBR-deleted resources
* CR: produce the list of dependent resources in dependency order and iterate over the list in reverse
* CR: deps->dependents, fix an issue with DependingOn where duplicate nodes could be added to the dependent set
* CR: Fix an issue where we were considering old defaults and new inputs
inappropriately when re-creating a deleted resource
* CR: save 'iter.deletes[urn]' as a local, iterate starting at cursorIndex + 1 for dependency graph
* Graceful RPC shutdown: CLI side
* Handle unavailable resource monitor in language hosts
* Fix a comment
* Don't commit package-lock.json
* fix mangled pylint pragma
* Rebase against master and fix Gopkg.lock
* Code review feedback
* Fix a race between closing the callerEventsOpt channel and terminating a goroutine that writes to it
* glog -> logging
In pulumi/pulumi#1356, we observed that we can fail during a destroy
because we attempt to load the language plugin, which now eagerly looks
for the @pulumi/pulumi package.
This is also blocking ingestion of the latest engine bits into the PPC.
It turns out that for destroy (and refresh), we have no need for the
language plugin. So, let's skip loading it when appropriate.
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
This issue arises becuase the behavior we're currently getting from Diff
for TF-based providers differs from the behavior we expect. We are
presenting the provider with the old state and new inputs. If the old
state contains output properties that differ from the new inputs, the
provider will detect a diff where we may expect no changes.
Rather than deferring to the provider for all diffs, these changes only
defer to the provider if a legacy diff was detected (i.e. there is some
difference between the old and new provider-calculated inputs).
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
* Lift snapshot management out of the engine
This PR is a prerequisite for parallelism by addressing a major problem
that the engine has to deal with when performing parallel resource
construction: parallel mutation of the global snapshot. This PR adds
a `SnapshotManager` type that is responsible for maintaining and
persisting the current resource snapshot. It serializes all reads and
writes to the global snapshot and persists the snapshot to persistent
storage upon every write.
As a side-effect of this, the core engine no longer needs to know about
snapshot management at all; all snapshot operations can be handled as
callbacks on deployment events. This will greatly simplify the
parallelization of the core engine.
Worth noting is that the core engine will still need to be able to read
the current snapshot, since it is interested in the dependency graphs
contained within. The full implications of that are out of scope of this
PR.
Remove dead code, Steps no longer need a reference to the plan iterator that created them
Fixing various issues that arise when bringing up pulumi-aws
Line length broke the build
Code review: remove dead field, fix yaml name error
Rebase against master, provide implementation of StackPersister for cloud backend
Code review feedback: comments on MutationStatus, style in snapshot.go
Code review feedback: move SnapshotManager to pkg/backend, change engine to use an interface SnapshotManager
Code review feedback: use a channel for synchronization
Add a comment and a new test
* Maintain two checkpoints, an immutable base and a mutable delta, and
periodically merge the two to produce snapshots
* Add a lot of tests - covers all of the non-error paths of BeginMutation and End
* Fix a test resource provider
* Add a few tests, fix a few issues
* Rebase against master, fixed merge
This change skips unknown IDs during read operations. This can happen
when a read is performed using the output property of another resource
during planning. This is intentionally supported via ID being an
Input<ID> and all we need to do for this to work correctly is skip the
actual provider RPC and the runtime will propagate unknown outputs as
usual.
This change wires up the new Read RPC method in such a manner that
Pulumi programs can invoke it. This is technically not required for
refreshing state programmatically (as in pulumi/pulumi#1081), however
it's a feature we had eons ago and have wanted since (see
pulumi/pulumi#83), and will allow us to write code like
let vm = aws.ec2.Instance.get("my-vm", "i-07043cd97bd2c9cfc");
// use any property from here on out ...
The way this works is simply by bridging the Pulumi program via its
existing RPC connection to the engine, much like Invoke and
RegisterResource RPC requests already do, and then invoking the proper
resource provider in order to read the state. Note that some resources
cannot be uniquely identified by their ID alone, and so an extra
resource state bag may be provided with just those properties required.
This came almost for free (okay, not exactly) and will come in handy as
we start gaining experience with reading live state from resources.
This commit changes two things about our resource model:
* Stop performing Pulumi Engine-side diffing of resource state.
Instead, we defer to the resource plugins themselves to determine
whether a change was made and, if so, the extent of it. This
manifests as a simple change to the Diff function; it is done in
a backwards compatible way so that we continue with legacy diffing
for existing resource provider plugins.
* Add a Read RPC method for resource providers. It simply takes a
resource's ID and URN, plus an optional bag of further qualifying
state, and it returns the current property state as read back from
the actual live environment. Note that the optional bag of state
must at least include enough additional properties for resources
wherein the ID is insufficient for the provider to perform a lookup.
It may, however, include the full bag of prior state, for instance
in the case of a refresh operation.
This is part of pulumi/pulumi#1108.
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
This change uses the prior checkpoint's deployment manifest to pre-
populate all plugins required to complete the destroy operation. This
allows for subsequent attempts to load a resource's plugin to match the
already-loaded version. This approach obviously doesn't work in a
hypothetical future world where plugins for the same resource provider
are loaded side-by-side, but we already know that.
* Improve error messages output by the CLI
This fixes a couple known issues with the way that we present errors
from the Pulumi CLI:
1. Any errors from RPC endpoints were bubbling up as they were to
the top-level, which was unfortunate because they contained
RPC-specific noise that we don't want to present to the user. This
commit unwraps errors from resource providers.
2. The "catastrophic error" message often got printed twice
3. Fatal errors are often printed twice, because our CLI top-level
prints out the fatal error that it receives before exiting. A lot of
the time this error has already been printed.
4. Errors were prefixed by PU####.
* Feedback: Omit the 'catastrophic' error message and use a less verbose error message as the final error
* Code review feedback: interpretRPCError -> resourceStateAndError
* Code review feedback: deleting some commented-out code, error capitalization
* Cleanup after rebase
This API was introduced to aid the refactoring, but it isn't something
we want to support long term. Remove it and for a few places, push
passing config.Key around more, instead of converting to the old type
eagerly.
config.Key has become a pair of namespace and name. Because the whole
world has not changed yet, there continues to be a way to convert
between a tokens.ModuleMember and config.Key, however now sometime the
conversion from tokens.ModuleMember can fail (when the module member
is not of the form `<package>:config:<name>`).
As it stands, we only configure those providers for which configuration
is present. This can lead to surprising failure modes if those providers
are then used to create resources. These changes ensure that all
resource providers that are not configured during plan initialization
are configured upon first load.
Fixes#758.
Most of the errors in this package are holdovers from our previous
syetem where we had our own custom compiler and evaluator and are no
longer needed. The few we still use during plan applicaton (via the
diagnostics system, which is another component from the old system
that we still use) have been promoted into the diag package. Doing so,
allows us to not have to import "github.com/pkg/errors" as "goerr" in
some parts of the engine, a nice cleaup.
1. Various idiomatic Go and TypeScript fixes
2. Add an integration test that end-to-end roundtrips dependency
information for a simple Pulumi program
3. Add an additional test assert that tests that dependency information
comes from the language host as expected
This commit does two things:
1. All dependencies of a resource, both implicit and explicit, are
communicated directly to the engine when registering a resource. The
engine keeps track of these dependencies and ultimately serializes
them out to the checkpoint file upon successful deployment.
2. Once a successful deployment is done, the new `pulumi stack
graph` command reads the checkpoint file and outputs the dependency
information within in the DOT format.
Keeping track of dependency information within the checkpoint file is
desirable for a number of reasons, most notably delete-before-create,
where we want to delete resources before we have created their
replacement when performing an update.
This brings back the Node.js language plugin's GetRequiredPlugins
function, reimplemented in Go now that the language host has been
rewritten from JavaScript. Fairly rote translation, along with
some random fixes required to get tests passing again.
This change adds a GetRequiredPlugins RPC method to the language
host, enabling us to query it for its list of plugin requirements.
This is language-specific because it requires looking at the set
of dependencies (e.g., package.json files).
It also adds a call up front during any update/preview operation
to compute the set of plugins and require that they are present.
These plugins are populated in the cache and will be used for all
subsequent plugin-related operations during the engine's activity.
We now cache the language plugins, so that we may load them
eagerly too, which we never did previously due to the fact that
we needed to pass the monitor address at load time. This was a
bit bizarre anyhow, since it's really the Run RPC function that
needs this information. So, to enable caching and eager loading
-- which we need in order to invoke GetRequiredPlugins -- the
"phone home" monitor RPC address is passed at Run time.
In a subsequent change, we will switch to faulting in the plugins
that are missing -- rather than erroring -- in addition to
supporting the `pulumi plugin install` CLI command.
This addresses pulumi/pulumi#446: what we used to call "package" is
now called "project". This has gotten more confusing over time, now
that we're doing real package management.
Also fixespulumi/pulumi#426, while in here.
My previous change to stop supplying unknown properties to providers
broke `pulumi preview` in the case of unknown inputs. This change
restores the previous behavior for previews only; the new unknown-free
behavior remains for applies.
Fixes#790.
These changes refactor the engine's entrypoints--Deploy, Destroy, and
Preview--to be update-centric rather than stack-centric. Each of these
methods now takes a value of a new type, Update, that abstracts away the
vagaries of fetching and maintaining the update's state. This
refactoring also reinforces Pulumi.yaml as a CLI concept rather than an
engine concept; the CLI is now the only reader/writer of this format.
These changes will smooth the way for a few refactorings on the service
side that will aid in update isolation.
This merging causes similar issues to those it did in `Check`, and
differs from the approach we take to `Diff`. This can causes problems
such as an inability to remove properties.
This change implements resource protection, as per pulumi/pulumi#689.
The overall idea is that a resource can be marked as "protect: true",
which will prevent deletion of that resource for any reason whatsoever
(straight deletion, replacement, etc). This is expressed in the
program. To "unprotect" a resource, one must perform an update setting
"protect: false", and then afterwards, they can delete the resource.
For example:
let res = new MyResource("precious", { .. }, { protect: true });
Afterwards, the resource will display in the CLI with a lock icon, and
any attempts to remove it will fail in the usual ways (in planning or,
worst case, during an actual update).
This was done by adding a new ResourceOptions bag parameter to the
base Resource types. This is unfortunately a breaking change, but now
is the right time to take this one. We had been adding new settings
one by one -- like parent and dependsOn -- and this new approach will
set us up to add any number of additional settings down the road,
without needing to worry about breaking anything ever again.
This is related to protected stacks, as described in
pulumi/pulumi-service#399. Most likely this will serve as a foundational
building block that enables the coarser grained policy management.
We do not need all of the information in the old state for this call, as
outputs will not be read by the provider during validation or defaults
computation.
This change adds a bit more tracing context to RPC marshaling
logging so that it's easier to attribute certain marshaling calls.
Prior to this, we'd just have a flat list of "marshaled property X"
without any information about what the marshaling pertained to.
This change passes a resource's old output state, so that it contains
everything -- defaults included -- for purposes of the provider's diffing.
Not doing so can lead the provider into thinking some of the requisite
state is missing.
This change adds rudimentary delete-before-create support (see
pulumi/pulumi#450). This cannot possibly be complete until we also
implement pulumi/pulumi#624, becuase we may try to delete a resource
while it still has dependent resources (which almost certainly will
fail). But until then, we can use this to manually unwedge ourselves
for leaf-node resources that do not support old and new resources
living side-by-side.
This change just flows the project's "main" directory all the way
through to the plugins, fixing #667. In that work item, we discussed
alternative approaches, such as rewriting the asset paths, but this
is tricky because it's very tough to do without those absolute paths
somehow ending up in the checkpoint files. Just launching the
processes with the right pwd is far easier and safer, and it turns
out that, conveniently, we set up the plugin context in exactly the
same place that we read the project information.
The two-phase output properties change broke the ability to recover
from a failed replacement that yields pending deletes in the checkpoint.
The issue here is simply that we should remember pending registrations
only for logical operations that *also* have a "new" state (create or
update). This commit fixes this, and also adds a new step test with
fault injection to probe many interesting combinations of steps.
Every single resource has a type prefix of
pulumi:pulumi:Stack$
which makes URNs quite lengthy without adding any value. Since
they all have this prefix, adding it doesn't help to disambiguate.
This change skips adding the parent URN part when it is the built-in
automatic stack type name.
At some point, we fixed a bug in the way state is managed for "same"
steps, which meant that we wouldn't see newly added output properties.
This had the effect that, if you had a stack already stood up, and
updated it to have output properties, we would miss them. (Stacks
stood up from scratch would still have them.) This fixes that problem,
in addition to two other things: 1) we need to sort output property
names to ensure a deterministic ordering, and 2) we need to also
unconditionally apply the outputs RPC coming in, to ensure that the
resulting resource always has the correct outputs (so that for example
deleting prior output properties actually deletes them).
Also add some testing for this area to make sure we don't break again.
Fixespulumi/pulumi#631.
These changes push the `config.{Map,Value}` interfaces further down into
the deployment engine so that configuration can be decrypted nearer to
its use.
This is the first part of the fix for pulumi/pulumi-ppc#112.
As documented in issue #616, the inputs/defaults/outputs model we have
today has fundamental problems. The crux of the issue is that our
current design requires that defaults present in the old state of a
resource are applied to the new inputs for that resource.
Unfortunately, it is not possible for the engine to decide which
defaults remain applicable and which do not; only the provider has that
knowledge.
These changes take a more tactical approach to resolving this issue than
that originally proposed in #616 that avoids breaking compatibility with
existing checkpoints. Rather than treating the Pulumi inputs as the
provider input properties for a resource, these inputs are first
translated by `Check`. In order to accommodate provider defaults that
were chosen for the old resource but should not change for the new,
`Check` now takes the old provider inputs as well as the new Pulumi
inputs. Rather than the Pulumi inputs and provider defaults, the
provider inputs returned by `Check` are recorded in the checkpoint file.
Put simply, these changes remove defaults as a first-class concept
(except inasmuch as is required to retain the ability to read old
checkpoint files) and move the responsibilty for manging and
merging defaults into the provider that supplies them.
Fixes#616.
This change adds a new manifest section to the checkpoint files.
The existing time moves into it, and we add to it the version of
the Pulumi CLI that created it, along with the names, types, and
versions of all plugins used to generate the file. There is a
magic cookie that we also use during verification.
This is to help keep us sane when debugging problems "in the wild,"
and I'm sure we will add more to it over time (checksum, etc).
For example, after an up, you can now see this in `pulumi stack`:
```
Current stack is demo:
Last updated at 2017-12-01 13:48:49.815740523 -0800 PST
Pulumi version v0.8.3-79-g1ab99ad
Plugin pulumi-provider-aws [resource] version v0.8.3-22-g4363e77
Plugin pulumi-langhost-nodejs [language] version v0.8.3-79-g77bb6b6
Checkpoint file is /Users/joeduffy/dev/code/src/github.com/pulumi/pulumi-aws/.pulumi/stacks/webserver/demo.json
```
This addresses pulumi/pulumi#628.
This change introduces automatic integrity checking for snapshots.
Hopefully this will help us track down what's going on in
pulumi/pulumi#613. Eventually we probably want to make this opt-in,
or disable it entirely other than for internal Pulumi debugging, but
until we add more complete DAG verification, it's relatively cheap
and is worthwhile to leave on for now.
The prior change was incorrectly handling snapshotting of replacement
operations. Further, in hindsight, the older model of having steps
manage their interaction with the snapshot marking was clearer, so
I've essentially brought that back, merging it with the other changes.
This change simplifies the necessary RPC changes for components.
Instead of a Begin/End pair, which complicates the whole system
because now we have the opportunity of a missing End call, we will
simply let RPCs come in that append outputs to existing states.