This merging causes similar issues to those it did in `Check`, and
differs from the approach we take to `Diff`. This can causes problems
such as an inability to remove properties.
This change implements resource protection, as per pulumi/pulumi#689.
The overall idea is that a resource can be marked as "protect: true",
which will prevent deletion of that resource for any reason whatsoever
(straight deletion, replacement, etc). This is expressed in the
program. To "unprotect" a resource, one must perform an update setting
"protect: false", and then afterwards, they can delete the resource.
For example:
let res = new MyResource("precious", { .. }, { protect: true });
Afterwards, the resource will display in the CLI with a lock icon, and
any attempts to remove it will fail in the usual ways (in planning or,
worst case, during an actual update).
This was done by adding a new ResourceOptions bag parameter to the
base Resource types. This is unfortunately a breaking change, but now
is the right time to take this one. We had been adding new settings
one by one -- like parent and dependsOn -- and this new approach will
set us up to add any number of additional settings down the road,
without needing to worry about breaking anything ever again.
This is related to protected stacks, as described in
pulumi/pulumi-service#399. Most likely this will serve as a foundational
building block that enables the coarser grained policy management.
This change adds rudimentary delete-before-create support (see
pulumi/pulumi#450). This cannot possibly be complete until we also
implement pulumi/pulumi#624, becuase we may try to delete a resource
while it still has dependent resources (which almost certainly will
fail). But until then, we can use this to manually unwedge ourselves
for leaf-node resources that do not support old and new resources
living side-by-side.
At some point, we fixed a bug in the way state is managed for "same"
steps, which meant that we wouldn't see newly added output properties.
This had the effect that, if you had a stack already stood up, and
updated it to have output properties, we would miss them. (Stacks
stood up from scratch would still have them.) This fixes that problem,
in addition to two other things: 1) we need to sort output property
names to ensure a deterministic ordering, and 2) we need to also
unconditionally apply the outputs RPC coming in, to ensure that the
resulting resource always has the correct outputs (so that for example
deleting prior output properties actually deletes them).
Also add some testing for this area to make sure we don't break again.
Fixespulumi/pulumi#631.
As documented in issue #616, the inputs/defaults/outputs model we have
today has fundamental problems. The crux of the issue is that our
current design requires that defaults present in the old state of a
resource are applied to the new inputs for that resource.
Unfortunately, it is not possible for the engine to decide which
defaults remain applicable and which do not; only the provider has that
knowledge.
These changes take a more tactical approach to resolving this issue than
that originally proposed in #616 that avoids breaking compatibility with
existing checkpoints. Rather than treating the Pulumi inputs as the
provider input properties for a resource, these inputs are first
translated by `Check`. In order to accommodate provider defaults that
were chosen for the old resource but should not change for the new,
`Check` now takes the old provider inputs as well as the new Pulumi
inputs. Rather than the Pulumi inputs and provider defaults, the
provider inputs returned by `Check` are recorded in the checkpoint file.
Put simply, these changes remove defaults as a first-class concept
(except inasmuch as is required to retain the ability to read old
checkpoint files) and move the responsibilty for manging and
merging defaults into the provider that supplies them.
Fixes#616.
The prior change was incorrectly handling snapshotting of replacement
operations. Further, in hindsight, the older model of having steps
manage their interaction with the snapshot marking was clearer, so
I've essentially brought that back, merging it with the other changes.
This change simplifies the necessary RPC changes for components.
Instead of a Begin/End pair, which complicates the whole system
because now we have the opportunity of a missing End call, we will
simply let RPCs come in that append outputs to existing states.
This change brings back component outputs to the overall system again.
In doing so, it generally overhauls the way we do resource RPCs a bit:
* Instead of RegisterResource and CompleteResource, we call these
BeginRegisterResource and EndRegisterResource, which begins to model
these as effectively "asynchronous" resource requests. This should also
help with parallelism (https://github.com/pulumi/pulumi/issues/106).
* Flip the CLI/engine a little on its head. Rather than it driving the
planning and deployment process, we move more to a model where it
simply observes it. This is done by implementing an event handler
interface with three events: OnResourceStepPre, OnResourceStepPost,
and OnResourceComplete. The first two are invoked immediately before
and after any step operation, and the latter is invoked whenever a
EndRegisterResource comes in. The reason for the asymmetry here is
that the checkpointing logic in the deployment engine is largely
untouched (intentionally, as this is a sensitive part of the system),
and so the "begin"/"end" nature doesn't flow through faithfully.
* Also make the engine more event-oriented in its terminology and the
way it handles the incoming BeginRegisterResource and
EndRegisterResource events from the language host. This is the first
step down a long road of incrementally refactoring the engine to work
this way, a necessary prerequisite for parallelism.
* Don't show +s, -s, and ~s deeply. The intended format here looks
more like
+ aws:iam/instanceProfile:InstanceProfile (create)
[urn=urn:pulumi:test::aws/minimal::aws/iam/instanceProfile:InstanceProfile::ip2]
name: "ip2-079a29f428dc9987"
path: "/"
role: "ir-d0a632e3084a0252"
versus
+ aws:iam/instanceProfile:InstanceProfile (create)
+ [urn=urn:pulumi:test::aws/minimal::aws/iam/instanceProfile:InstanceProfile::ip2]
+ name: "ip2-079a29f428dc9987"
+ path: "/"
+ role: "ir-d0a632e3084a0252"
This makes it easier to see the resources modified in the output.
* Print adds/deletes during updates as
- property: "x"
+ property: "y"
rather than
~ property: "x"
~ property: "y"
the latter of which doesn't really tell you what's new/old.
* Show parent indentation on output properties, so they line up correctly.
* Only print stack outputs if not undefined.
This change switches from child lists to parent pointers, in the
way resource ancestries are represented. This cleans up a fair bit
of the old parenting logic, including all notion of ambient parent
scopes (and will notably address pulumi/pulumi#435).
This lets us show a more parent/child display in the output when
doing planning and updating. For instance, here is an update of
a lambda's text, which is logically part of a cloud timer:
* cloud:timer:Timer: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️timer:Timer::lm-cts-malta-job-CleanSnapshots]
* cloud:function:Function: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️function:Function::lm-cts-malta-job-CleanSnapshots]
* aws:serverless:Function: (same)
[urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots]
~ aws:lambda/function:Function: (modify)
[id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741]
[urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots]
- code : archive(assets:2092f44) {
// etc etc etc
Note that we still get walls of text, but this will be actually
quite nice when combined with pulumi/pulumi#454.
I've also suppressed printing properties that didn't change during
updates when --detailed was not passed, and also suppressed empty
strings and zero-length arrays (since TF uses these as defaults in
many places and it just makes creation and deletion quite verbose).
Note that this is a far cry from everything we can possibly do
here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417).
But it's a good start towards taming some of our output spew.
This change adds back component output properties. Doing so
requires splitting the RPC interface for creating resources in
half, with an initial RegisterResource which contains all of the
input properties, and a final CompleteResource which optionally
contains any output properties synthesized by the component.
This change switches from child lists to parent pointers, in the
way resource ancestries are represented. This cleans up a fair bit
of the old parenting logic, including all notion of ambient parent
scopes (and will notably address pulumi/pulumi#435).
This lets us show a more parent/child display in the output when
doing planning and updating. For instance, here is an update of
a lambda's text, which is logically part of a cloud timer:
* cloud:timer:Timer: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️timer:Timer::lm-cts-malta-job-CleanSnapshots]
* cloud:function:Function: (same)
[urn=urn:pulumi:malta::lm-cloud:☁️function:Function::lm-cts-malta-job-CleanSnapshots]
* aws:serverless:Function: (same)
[urn=urn:pulumi:malta::lm-cloud::aws:serverless:Function::lm-cts-malta-job-CleanSnapshots]
~ aws:lambda/function:Function: (modify)
[id=lm-cts-malta-job-CleanSnapshots-fee4f3bf41280741]
[urn=urn:pulumi:malta::lm-cloud::aws:lambda/function:Function::lm-cts-malta-job-CleanSnapshots]
- code : archive(assets:2092f44) {
// etc etc etc
Note that we still get walls of text, but this will be actually
quite nice when combined with pulumi/pulumi#454.
I've also suppressed printing properties that didn't change during
updates when --detailed was not passed, and also suppressed empty
strings and zero-length arrays (since TF uses these as defaults in
many places and it just makes creation and deletion quite verbose).
Note that this is a far cry from everything we can possibly do
here as part of pulumi/pulumi#340 (and even pulumi/pulumi#417).
But it's a good start towards taming some of our output spew.
In our existing code, we only use the input state for old and new
properties. This is incorrect and I'm astonished we've been flying
blind for so long here. Some resources require the output properties
from the prior operation in order to perform updates. Interestingly,
we did correclty use the full synthesized state during deletes.
I ran into this with the AWS Cloudfront Distribution resource,
which requires the etag from the prior operation in order to
successfully apply any subsequent operations.
During the course of a `pulumi update`, it is possible for a resource to
become slated for deletion. In the case that this deletion is part of a
replacement, another resource with the same URN as the to-be-deleted
resource will have been created earlier. If the `update` fails after the
replacement resource is created but before the original resource has been
deleted, the snapshot must capture that the original resource still exists
and should be deleted in a future update without losing track of the order
in which the deletion must occur relative to other deletes. Currently, we
are unable to track this information because the our checkpoints require
that no two resources have the same URN.
To fix this, these changes introduce to the update engine the notion of a
resource that is pending deletion and change checkpoint serialization to
use an array of resources rather than a map. The meaning of the former is
straightforward: a resource that is pending deletion should be deleted
during the next update.
This is a fairly major breaking change to our checkpoint files, as the
map of resources is no more. Happily, though, it makes our checkpoint
files a bit more "obvious" to any tooling that might want to grovel
or rewrite them.
Fixes#432, #387.
Previously we used the word "Environment" as the term for a deployment
target, but since then we've started to use the term Stack. Adopt this
across the CLI.
From a user's point of view, there are a few changes:
1. The `env` verb has been renamed to `stack`
2. The `-e` and `--env` options to commands which operate on an
environment now take `-s` or `--stack` instead.
3. Becase of (2), the commands that used `-s` to display a summary now
only support passing the full option name (`--summary`).
On the local file system, we still store checkpoint data in the `env`
sub-folder under `.pulumi` (so we can reuse existing checkpoint files
that were written to the old folder)
This changes a few things about "components":
* Rename what was previously ExternalResource to CustomResource,
and all of the related fields and parameters that this implies.
This just seems like a much nicer and expected name for what
these represent. I realize I am stealing a name we had thought
about using elsewhere, but this seems like an appropriate use.
* Introduce ComponentResource, to make initializing resources
that merely aggregate other resources easier to do correctly.
* Add a withParent and parentScope concept to Resource, to make
allocating children less error-prone. Now there's no need to
explicitly adopt children as they are allocated; instead, any
children allocated as part of the withParent callback will
auto-parent to the resource provided. This is used by
ComponentResource's initialization function to make initialization
easier, including the distinction between inputs and outputs.
This change implements core support for "components" in the Pulumi
Fabric. This work is described further in pulumi/pulumi#340, where
we are still discussing some of the finer points.
In a nutshell, resources no longer imply external providers. It's
entirely possible to have a resource that logically represents
something but without having a physical manifestation that needs to
be tracked and managed by our typical CRUD operations.
For example, the aws/serverless/Function helper is one such type.
It aggregates Lambda-related resources and exposes a nice interface.
All of the Pulumi Cloud Framework resources are also examples.
To indicate that a resource does participate in the usual CRUD resource
provider, it simply derives from ExternalResource instead of Resource.
All resources now have the ability to adopt children. This is purely
a metadata/tagging thing, and will help us roll up displays, provide
attribution to the developer, and even hide aspects of the resource
graph as appropriate (e.g., when they are implementation details).
Our use of this capability is ultra limited right now; in fact, the
only place we display children is in the CLI output. For instance:
+ aws:serverless:Function: (create)
[urn=urn:pulumi:demo::serverless::aws:serverless:Function::mylambda]
=> urn:pulumi:demo::serverless::aws:iam/role:Role::mylambda-iamrole
=> urn:pulumi:demo::serverless::aws:iam/rolePolicyAttachment:RolePolicyAttachment::mylambda-iampolicy-0
=> urn:pulumi:demo::serverless::aws:lambda/function:Function::mylambda
The bit indicating whether a resource is external or not is tracked
in the resulting checkpoint file, along with any of its children.
This change adds the capability for a resource provider to indicate
that, where an action carried out in response to a diff, a certain set
of properties would be "stable"; that is to say, they are guaranteed
not to change. As a result, properties may be resolved to their final
values during previewing, avoiding erroneous cascading impacts.
This avoids the ever-annoying situation I keep running into when demoing:
when adding or removing an ingress rule to a security group, we ripple
the impact through the instance, and claim it must be replaced, because
that instance depends on the security group via its name. Well, the name
is a great example of a stable property, in that it will never change, and
so this is truly unfortunate and always adds uncertainty into the demos.
Particularly since the actual update doesn't need to perform replacements.
This resolvespulumi/pulumi#330.
Print "modified" rather than "modifyd". This introduces a new method,
`resource.StepOp.PastTense()`, which returns the past tense description
of the operation.
This includes a few changes:
* The repo name -- and hence the Go modules -- changes from pulumi-fabric to pulumi.
* The Node.js SDK package changes from @pulumi/pulumi-fabric to just pulumi.
* The CLI is renamed from lumi to pulumi.
If a resource's planning operation is to do nothing, we can safely
assume that all of its properties are stable. This can be used during
planning to avoid cascading updates that we know will never happen.
As explained in pulumi/pulumi-fabric#293, we were a little ad-hoc in
how configuration was "applied" to resource providers.
In fact, config wasn't ever communicated directly to providers; instead,
the resource providers would simply ask the engine to read random heap
locations (via tokens). Now that we're on a plan where configuration gets
handed to the program at startup, and that's that, and where generally
speaking resource providers never communicate directly with the language
runtime, we need to take a different approach.
As such, the resource provider interface now offers a Configure RPC
method that the resource planning engine will invoke at the right
times with the right subset of configuration variables filtered to
just that provider's package. This fixespulumi/pulumi#293.
This change simplifies the provider RPC interface slightly:
1) Eliminate Get. We really don't need it anymore. There are
several possibly-interesting scenarios down the road that may
demand it, but when we get there, we can consider how best to
bring this back. Furthermore, the old-style Get remains mostly
incompatible with Terraform anyway.
2) Pass URNs, not type tokens, across the RPC boundary. This gives
the provider access to more interesting information: the type,
still, but also the name (which is no longer an object property).
This changes a few things in the CLI, mostly just prettying it up:
* Label all steps more clearly with the kind of step. Also
unify the way we present this during planning and deployment.
* Summarize the changes that *did not* get made just as clearly
as those that did. In other words, stuff like this:
info: 2 resources changed:
+1 resource created
-1 resource deleted
5 resources unchanged
and
info: no resources required
5 resources unchanged
* Always print output properties when they are pertinent.
This includes creates, replacements, and updates.
* Show replacement creates and deletes very distinctly. The
create parts show up minty green and the delete parts show up
rosey red. These are the "physical" steps, compared to the
"logical" step of replacement (which remains marigold).
I still don't love where we are here. The asymmetry between
planning and deployment bugs me, and could be surprising.
("Hey, my deploy doesn't look like my plan!") I don't know
what developers will want to see here and I feel like in
general we are spewing far too much into the CLI to make it
even useful for anything but diagnosing failures afterwards.
I propose that we should do a deep dive on this during the
CLI epic, pulumi/pulumi-service#2.
This resolvespulumi/pulumi-fabric#305.
We are renaming Lumi to Pulumi Fabric. This change simply renames the
pulumi/lumi repo to pulumi/pulumi-fabric, without the CLI tools and other
changes that will follow soon afterwards.
This changes the RPC interfaces between Lumi and provider ever so
slightly, so that we can track default properties explicitly. This
is required to perform accurate diffing between inputs provided by
the developer, inputs provided by the system, and outputs. This is
particularly important for default values that may be indeterminite,
such as those we use in the bridge to auto-generate unique IDs.
Otherwise, we fail to reapply defaults correctly, and trick the
provider into thinking that properties changed when they did not.
This is a small step towards pulumi/lumi#306, in which we will defer
even more responsibility for diffing semantics to the providers.
For Update and Delete operations, we provided just the input state
for a resource. This is insufficient, because the provider may need
to depend on output state from the Create or prior Update operations.
This change merges the output atop the input during the step application.
As part of the bridge bringup, I've discoverd that the property state
returned from Creates does *not* always equal the state that is then
read from calls to Get. (I suspect this is a bug and that they should
be equivalent, but I doubt it's fruitfal to try and track down all
occurrences of this; I bet it's widespread). To cope with this, we will
return state from Create and Update, instead of issuing a call to Get.
This was a design we considered to start with and frankly didn't have
a super strong reason to do it the current way, other than that it seemed
elegant to place all of the Get logic in one place.
Note that providers may choose to return nil, in which case we will read
state from the provider in the usual Get style.
After 233c5a8 landed, I noticed there are a few things to be fixed up:
* Run gometalinter in all the right places. We need to run both in
lint and lint_quiet targets. I've also cleaned up some of the logic
around what to suppress so there's less repetition.
* We currently @ meaningful commands, which is unfortunate, since it
makes debugging Makefiles tough (especially when looking at CI build
logs). Going forward, we should only use @ for meaningless commands,
like @echo.
* The AWS project wasn't actually running tslint, because it needs to
say `tslint './pack/**/*.ts' --exclude='./pack/node_modules/**'`.
The current script of `tslint lib/aws/pack/...` wasn't actually
running lint, hence we missed a lot of AWS lint issues.
* Fix up the issues that these fixes uncovered. Mostly err shadowing.
This change implements the `get` function for resources. Per pulumi/lumi#83,
this allows Lumi scripts to actually read from the target environment.
For example, we can now look up a SecurityGroup from its ARN:
let group = aws.ec2.SecurityGroup.get(
"arn:aws:ec2:us-west-2:153052954103:security-group:sg-02150d79");
The returned object is a fully functional resource object. So, we can then
link it up with an EC2 instance, for example, in the usual ways:
let instance = new aws.ec2.Instance(..., {
securityGroups: [ group ],
});
This didn't require any changes to the RPC or provider model, since we
already implement the Get function.
There are a few loose ends; two are short term:
1) URNs are not rehydrated.
2) Query is not yet implemented.
One is mid-term:
3) We probably want a URN-based lookup function. But we will likely
wait until we tackle pulumi/lumi#109 before adding this.
And one is long term (and subtle):
4) These amount to I/O and are not repeatable! A change in the target
environment may cause a script to generate a different plan
intermittently. Most likely we want to apply a different kind of
deployment "policy" for such scripts. These are inching towards the
scripting model of pulumi/lumi#121, which is an entirely different
beast than the repeatable immutable infrastructure deployments.
Finally, it is worth noting that with this, we have some of the fundamental
underpinnings required to finally tackle "inference" (pulumi/lumi#142).
This change updates the ID/output propagation logic to properly handle
the case of replacements, in addition to accurately conveying the fact
that an update may change the values of output properties (but not the ID).
Also fixes a formatting issue with the replacement diffing displays.
This change introduces an OpSame planning step. The reason we need
this is so that we can apply the necessary output properties, including
the ID, even as we are simply walking the plan (i.e., when we aren't
actually performing a deployment). This ensures that the object state
evolves as required to let reads of output properties propagate in the
ways necessary to reproduce past executions of the program.
This change refactors a number of aspects of the CLI's treatment of
steps, in line with the new scheme, and a number of other miscellaneous
and minor fixes. It also regenerates all RPC code impacted by recent renames.
This change restructures a lot more pertaining to deployments, snapshots,
environments, and the like.
The most notable change is that the notion of a deploy.Source is introduced,
which splits the responsibility between the deploy.Plan -- which simply
understands how to compute and carry out deployment plans -- and the idea
of something that can produce new objects on-demand during deployment.
The primary such implementation is evalSource, which encapsulates an
interpreter and takes a package, args, and config map, and proceeds to run
the interpreter in a distinct goroutine. It synchronizes as needed to
poke and prod the interpreter along its path to create new resource objects.
There are two other sources, however. First, a nullSource, which simply
refuses to create new objects. This can be handy when writing isolated
tests but is also used to simulate the "empty" environment as necessary to
do a complete teardown of the target environment. Second, a fixedSource,
which takes a pre-computed array of objects, and hands those, in order, to
the planning engine; this is mostly useful as a testing technique.
Boatloads of code is now changed and updated in the various CLI commands.
This further chugs along towards pulumi/lumi#90. The end is in sight.
2017-06-13 07:10:13 -07:00
Renamed from pkg/resource/deployment/step.go (Browse further)
