`ConstructInputs.CopyTo` can error when falling back to the old marshaling behavior when it's lacking an input type registration for a _known_ output value. In such cases, it tries to unmarshal a known output value, it can't unmarshal it because of a missing switch case. This change adds the missing case.
* Enable output values by default
Enable output values by default in the resource monitor and change the polarity of the envvar from `PULUMI_ENABLE_OUTPUT_VALUES` to `PULUMI_DISABLE_OUTPUT_VALUES`.
* Marshal unknown as unknown string when `!KeepOutputValues`
Marshal all unknown output values as `resource.MakeComputed(resource.NewStringProperty(""))` when not keeping output values, which is consistent with what the SDKs do.
Otherwise, when `v.OutputValue().Element` is nil, `resource.MakeComputed(v.OutputValue().Element)` will be marshaled as a null value rather than as an unknown sentinel.
* Add MarshalOptions.DontSkipOutputs and use where needed
Before we expanded the meaning of `resource.Output`, `MarshalProperties` always skipped output values:
```go
if v.IsOutput() {
logging.V(9).Infof("Skipping output property for RPC[%s]: %v", opts.Label, key)
}
```
As part of expanding the meaning of `resource.Output`, I'd adjusted `MarshalProperties` to only skip output values when the value was unknown and when not keeping output values:
```go
if v.IsOutput() && !v.OutputValue().Known && !opts.KeepOutputValues {
logging.V(9).Infof("Skipping output property for RPC[%s]: %v", opts.Label, key)
}
```
However, this doesn't work the way we want when marshaling properties that include unknown output values to a provider that does not accept outputs. In that case, `opts.KeepOutputValues` will be `false` because we want the marshaler to fall back to returning non-output-values (e.g. unknown sentinel value for unknown output values), but instead of getting the intended fallback values, the unknown output values are skipped (not what we want).
I suspect we may be able to delete the output value skipping in `MarshalProperties` altogether (it's odd that it is skipping `resource.Output` but not `resource.Computed`), but to avoid any unintended side effects of doing that, instead, this commit introduces a new `MarshalOptions.DontSkipOutputs` option that can be set to `true` to opt-in to not skipping output values when marshaling. The check in `MarshalProperties` now looks like this:
```go
if !opts.DontSkipOutputs && v.IsOutput() && !v.OutputValue().Known {
logging.V(9).Infof("Skipping output property for RPC[%s]: %v", opts.Label, key)
}
```
`opts.DontSkipOutputs` is set to `true` when marshaling properties for calls to a provider's `Construct` and `Call`.
* [sdk/nodejs] Deserialize output values
This commit adds support for deserializing output values, which is needed in some cases when serialized inputs are returned as outputs in the SDK.
* [sdk/python] Deserialize output values
This commit adds support for deserializing output values, which is needed in some cases when serialized inputs are returned as outputs in the SDK.
v3.13.0 introduces support for serializing outputs in inputs as special output value objects in the Node.js and Python SDKs when serializing inputs for remote components and method calls. This functionality is currently disabled by default in the engine (setting the `PULUMI_ENABLE_OUTPUT_VALUES` envvar to a truthy value enables it).
However, unit testing remote components with mocks results in errors being raised in v3.13.0, related to the new output value support. This is due to the mock monitor implementation saying it supports all features (which now includes output values), so the SDK serializers are serializing outputs as output values, which the mock monitor can't handle correctly.
This change addresses the issue by updating the mock monitor implementation in the Node.js and Python SDKs to indicate the specific features that are supported, excluding support for output values. New tests with mocks fail before the change and pass after.
* Multi-pass, in-place checks for SDK codegen tests; toward working Python checks
* Remove temp debug output
* Upgrade Node
* Update dotnet; need to follow up on version.txt quirks
* WIP
* Sounds like we can use non-github package names to ensure things are local
* Fix simple-enum-schema
* Fix dash-named-schema
* Fix nested-module
* Start building a test-running pass
* Infer skipping tests from skipping compiles
* Move tree schma tests to a proper place
* Address lint issues on Go code
* Build against local Go SDK
* Update pkg/codegen/internal/test/sdk_driver.go
Co-authored-by: Ian Wahbe <ian@wahbe.com>
* Make go tests work by copying them into the tree from go-extras
* Fix lint
* Fix bad merge
* Manifest-based file discovery
* Remove version-related TODO from dotnet codegen
* Add doc comment
* Do not overwrite go.mod if found from mixins
* Accept python codegen change
* Accept node codegen
* Ignore lint issue
* Accept docs changes
Co-authored-by: Ian Wahbe <ian@wahbe.com>
This schema can be used to validate the contents of a Pulumi deployment.
If a deployment validates against this schema, it should be considered
syntactically valid, though it may contain certain classes of semantic
errors (e.g. references to unknown resources in dependency lists,
dependency cycles, etc.).
This schema is not yet used for validation in practice and may not be
entirely accurate.
These changes also add this schema (and the schemas on which it depends)
to the developer documentation. jsonschema2md.go has been updated to
support multi-file schemas.
* Experiment with matrix exclude/include rules
* Check if this applies to current PR
* Try again on the right yml file
* Why is GHA trying to find self-hosted workers
* Revert all changes
* No-op change
* Try a system where PR verification uses only 1 worker
* Fix include directive so that mac job has the right variables
* Fix YAML syntax
The Pulumi Package metaschema is a JSON schema definition that describes
the format of a Pulumi Package schema. The metaschema can be used to
validate certain basic properties of a Pulumi Package schema, including
(but not limited to):
- data types (e.g. is this property a string?)
- data formats (e.g. is this string property a valid regex?)
- object shapes (e.g. is this object missing required properties?)
The schema binder has been updated to use the metaschema as its first
validation pass.
In addition to its use in the binder, the metaschema has its own page in
the developer documentation. This page is generated using a small tool,
jsonschema2md.go.
* Add pascal name case
* Add test to prevent regressions
* Update CHANGELOG_PENDING.md
* Give node/tsc more memory
* Use camelcase instead of snake case
* Add clearer comments
* Emit schema.Package.Version when possible
* Update CHANGELOG_PENDING.md
* Correctly interpret python versions (I hope)
* Update PLUGIN_VERSION to the package version
* Modify tests to conform with master merge
* Validate Name, Version and Enviroment
For the full path:
Package.Name
Package.Version
Package.Property.Default
* Update tests
* Update CHANGELOG_PENDING.md
* Add more versions to tests
* Add another "Version" field
* Even more "version" tags
* One more "version" tag added
* Update test results from codegen
* Fix py codegen tests
* Fix doc test
* Remove `version` validation
* Unformat json files
* Fail only on errors
This change adds a `RegisterInputType` function (similar to the existing `RegisterOutputType`) that is used to register an input interface's type and its associated input type, and adds registrations for the built-in input types.
This will be used when copying inputs to an args struct for multi-lang components. When a field is typed as the input interface (e.g. `StringMapInput`) and doesn't need to be an `Output`, we can use this to lookup the non-Output type that implements the interface (e.g. `StringMap`) so it can be instantiated.
A subsequent change will update the Go SDK codegen to produce input type registrations for a provider's input types.
* Thread replaceOnChanges through the Go SDK
* Add replaceOnChanges to the .NET SDK
* Update CHANGELOG_PENDING.md
* Fix null error
* Update CHANGELOG_PENDING.md
Co-authored-by: Justin Van Patten <jvp@justinvp.com>
We run the best static check we can on generated code, ensuring that it is valid.
* Run type checker against all languages (not docs)
* Fix package location, add some deps for schemas
* More tests passing
* These tests finally work
* Make linter happy
* Fix tests for merge from master
* Opt out of input-collision(nodejs) test
* Get more visibility into testing nodejs
* Fix type assumption
* Specify ts-node version
* Retrofit typescript dependencies for node14
* Give each go instance it's own module
* Attempt to diagnose remote go mod init failure
* Provide root for go mod init
* Make linter happy
This change expands the definition of `resource.Output` in the Go SDK with additional information about the output, i.e. dependencies and secretness, and adds support in the core Go RPC code for (un)marshaling output values.
Output values are marshaled as special objects ala archives, assets, and resource refs and are unmarshaled as `resource.Output` values.
Subsequent PRs will add:
- A monitor feature for output values, which will initially be disabled by default but available to turn on via an envvar
- Support for (un)marshaling output values in each language SDKs
- A way for providers to indicate support for receiving output values
- E2E tests
- Turn the monitor feature on by default (w/ env var to disable) (Note: the current plan is to initially scope this to only be used when marshaling inputs to a multi-language component)
* Added filebase64 support for Golang
* Fixed function signature
* Added filebase64 support for Typescript
* Added filebase64 support for Python
* Added filebase64 support for Dotnet, fixed Sha1
* Fixed helper method list
Co-authored-by: Vova Ivanov <jetvova@gmail.com>
* Fix some nits from 7874
This was a premature merge
* Fix#7940
We don't surface recursion warnings if there is no child where `replaceOnChanges` is set.
Currently whenever an issue occurs in `UnmarshalProperties` and
`MarshalProperties` the offending property is hidden and very difficult
to track down.
This commit changes the behavior. For `Assets` and `Archives` the error
message now includes the URI and for other properties it includes the
key of the `PropertyMap`.
