Adds support for additional cloud secrets providers (AWS KMS, Azure KeyVault, Google Cloud KMS, and HashiCorp Vault) as the encryption backend for Pulumi secrets. This augments the previous choice between using the app.pulumi.com-managed secrets encryption or a fully-client-side local passphrase encryption.
This is implemented using the Go Cloud Development Kit support for pluggable secrets providers.
Like our cloud storage backend support which also uses Go Cloud Development Kit, this PR also bleeds through to users the URI scheme's that the Go CDK defines for specifying each of secrets providers - like `awskms://alias/LukeTesting?region=us-west-2` or `azurekeyvault://mykeyvaultname.vault.azure.net/keys/mykeyname`.
Also like our cloud storage backend support, this PR doesn't solve for how to configure the cloud provider client used to resolve the URIs above - the standard ambient credentials are used in both cases. Eventually, we will likely need to provide ways for both of these features to be configured independently of each other and of the providers used for resource provisioning.
A workaround for #2695
During the plugin installation, we create a temporary folder, unzip the binary, and then rename the folder to a permanent name. The rename fails 90% of the time with access denied. An immediate retry of renaming seems to always succeed.
This package's flags conflict with those in google/glog. Replace all
references to this package with references to
pulumi/pulumi/pkg/util/logging, and change that package to explicitly
call `flag.CommandLine.Parse` with an empty slice.
This should make it much easier to consume these packages in downstream
repos that have direct or indirect dependencies on google/glog.
These changes add support for passing `ignoreChanges` paths to resource
providers. This is intended to accommodate providers that perform diffs
between resource inputs and resource state (e.g. all Terraform-based
providers, the k8s provider when using API server dry-runs). These paths
are specified using the same syntax as the paths used in detailed diffs.
In addition to passing these paths to providers, the existing support
for `ignoreChanges` in inputs has been extended to accept paths rather
than top-level keys. It is an error to specify a path that is missing
one or more component in the old or new inputs.
Fixes#2936, #2663.
This removes the need for a replace directive in every downstream `go.mod`,
however it does not protect against the case of a `go.mod` being added upstream
with a different import path in future. This seems unlikely given the cadence of
work upstream, however.
Most of these options are typically left unset. In order to make it
easier to update the lifecycle test when adding new options, collect
them in a bag s.t. most callsites can go without being updated.
* Fix issue when logging out of local backend
* Put actual cloud URL into credentials.json
* Fix test on Windows; disable newly-enabled tests on Appveyor
* Keep track of the URL used to initialize local backend
If we encounter a provider with old inputs but no old outputs when reading
a checkpoint file, use the old inputs as the old outputs. This handles the
scenario where the CLI is being upgraded from a version that did not
reflect provider inputs to provider outputs, and a provider is being
upgraded from a version that did not implement `DiffConfig` to a version
that does.
Fixes https://github.com/pulumi/pulumi-kubernetes/issues/645.
Currently, `pulumi preview` fails immediately when any resource
definition in a Pulumi app is found to be in violation of a resource
policy. But, users would like `preview` to report as many policy
violations as it can before terminating with an error, so that they can
fix many of them before running `preview` again.
This commit will thus change `pulumi preview` to do this sort of
"batching" for policy violations. The engine will attempt to run the
entire preview step, validating every resource definition with the
relevant known resource policies, before finally reporting an error if
any violations are detected.
Fixespulumi/pulumi-policy#31
The current CLI update view attributes all policy violation errors to
the root Stack resource. This commit will attribute them to the resource
that violated the policy.
The reason for this mis-attribution is a simple bookkeeping error:
* Resource policies intercept and prevent RegisterResource requests for
when the resource in question violates some policy.
* The CLI "tree" view of resources "hides" rows for resources that have
not been registered. Thus, if a policy violation occurs for a
resource, it becomes "orphaned" and is attributed to the stack,
because there is no row for the resource that violates the policy.
The solution, thus, is to simply set the "hidden" flag to false when we
encounter a policy violation.
Fixespulumi/pulumi-policy#25
Fixes: #2151
This will allow us to be able to share the code that generates our
language providers. Currently there is a copy of the python code
generation in pulumi-kubernetes and also in pulumi-terraform
We want to be able to share these
Dynamic providers in Python.
This PR uses [dill](https://pypi.org/project/dill/) for code serialization, along with a customization to help ensure deterministic serialization results.
One notable limitation - which I believe is a general requirement of Python - is that any serialization of Python functions must serialize byte code, and byte code is not safely versioned across Python versions. So any resource created with Python `3.x.y` can only be updated by exactly the same version of Python. This is very constraining, but it's not clear there is any other option within the realm of what "dynamic providers" are as a feature. It is plausible that we could ensure that updates which only update the serialized provider can avoid calling the dynamic provider operations, so that version updates could still be accomplished. We can explore this separately.
```py
from pulumi import ComponentResource, export, Input, Output
from pulumi.dynamic import Resource, ResourceProvider, CreateResult, UpdateResult
from typing import Optional
from github import Github, GithubObject
auth = "<auth token>"
g = Github(auth)
class GithubLabelArgs(object):
owner: Input[str]
repo: Input[str]
name: Input[str]
color: Input[str]
description: Optional[Input[str]]
def __init__(self, owner, repo, name, color, description=None):
self.owner = owner
self.repo = repo
self.name = name
self.color = color
self.description = description
class GithubLabelProvider(ResourceProvider):
def create(self, props):
l = g.get_user(props["owner"]).get_repo(props["repo"]).create_label(
name=props["name"],
color=props["color"],
description=props.get("description", GithubObject.NotSet))
return CreateResult(l.name, {**props, **l.raw_data})
def update(self, id, _olds, props):
l = g.get_user(props["owner"]).get_repo(props["repo"]).get_label(id)
l.edit(name=props["name"],
color=props["color"],
description=props.get("description", GithubObject.NotSet))
return UpdateResult({**props, **l.raw_data})
def delete(self, id, props):
l = g.get_user(props["owner"]).get_repo(props["repo"]).get_label(id)
l.delete()
class GithubLabel(Resource):
name: Output[str]
color: Output[str]
url: Output[str]
description: Output[str]
def __init__(self, name, args: GithubLabelArgs, opts = None):
full_args = {'url':None, 'description':None, 'name':None, 'color':None, **vars(args)}
super().__init__(GithubLabelProvider(), name, full_args, opts)
label = GithubLabel("foo", GithubLabelArgs("lukehoban", "todo", "mylabel", "d94f0b"))
export("label_color", label.color)
export("label_url", label.url)
```
Fixes https://github.com/pulumi/pulumi/issues/2902.
This commit will allow the Pulumi service HTTP client to deserialize
HTTP responses that have bodies encoded as `application/octet-stream` to
be deserialized as `[]byte`.
This fixes a small bug that causes the HTTP client to fail under these
circumstances, as it expects any body to be JSON-deserializable.
This command will cause `pulumi policy publish` to behave in much the
same way `pulumi up` does -- if the policy program is in TypeScript, we
will use ts-node to attempt to compile in-process before executing, and
fall back to plain-old node.
We accomplish this by moving `cmd/run/run.ts` into a generic helper
package, `runtime/run.ts`, which slightly generalizes the use cases
supported (notably, allowing us to exec some program outside of the
context of a Pulumi stack).
This new package is then called by both `cmd/run/index.ts` and
`cmd/run-policy-pack/index.ts`.
This commit will implement the core business logic of `pulumi policy
publish` -- code to boot an analyzer, ask it for metadata about the
policies it contains, pack the code, and transmit all of this to the
Pulumi service.
When a user runs `pulumi policy publish`, we need to package up a
directory of code and send it to the service. We implemented this once
before, for PPCs, so this simply re-introduces that code as it was in
the commit that deleted it.
* Plumbing the custom timeouts from the engine to the providers
* Plumbing the CustomTimeouts through to the engine and adding test to show this
* Change the provider proto to include individual timeouts
* Plumbing the CustomTimeouts from the engine through to the Provider RPC interface
* Change how the CustomTimeouts are sent across RPC
These errors were spotted in testing. We can now see that the timeout
information is arriving in the RegisterResourceRequest
```
req=&pulumirpc.RegisterResourceRequest{
Type: "aws:s3/bucket:Bucket",
Name: "my-bucket",
Parent: "urn:pulumi:dev::aws-vpc::pulumi:pulumi:Stack::aws-vpc-dev",
Custom: true,
Object: &structpb.Struct{},
Protect: false,
Dependencies: nil,
Provider: "",
PropertyDependencies: {},
DeleteBeforeReplace: false,
Version: "",
IgnoreChanges: nil,
AcceptSecrets: true,
AdditionalSecretOutputs: nil,
Aliases: nil,
CustomTimeouts: &pulumirpc.RegisterResourceRequest_CustomTimeouts{
Create: 300,
Update: 400,
Delete: 500,
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
},
XXX_NoUnkeyedLiteral: struct {}{},
XXX_unrecognized: nil,
XXX_sizecache: 0,
}
```
* Changing the design to use strings
* CHANGELOG entry to include the CustomTimeouts work
* Changing custom timeouts to be passed around the engine as converted value
We don't want to pass around strings - the user can provide it but we want
to make the engine aware of the timeout in seconds as a float64
A resource can be imported by setting the `import` property in the
resource options bag when instantiating a resource. In order to
successfully import a resource, its desired configuration (i.e. its
inputs) must not differ from its actual configuration (i.e. its state)
as calculated by the resource's provider.
There are a few interesting state transitions hiding here when importing
a resource:
1. No prior resource exists in the checkpoint file. In this case, the
resource is simply imported.
2. An external resource exists in the checkpoint file. In this case, the
resource is imported and the old external state is discarded.
3. A non-external resource exists in the checkpoint file and its ID is
different from the ID to import. In this case, the new resource is
imported and the old resource is deleted.
4. A non-external resource exists in the checkpoint file, but the ID is
the same as the ID to import. In this case, the import ID is ignored
and the resource is treated as it would be in all cases except for
changes that would replace the resource. In that case, the step
generator issues an error that indicates that the import ID should be
removed: were we to move forward with the replace, the new state of
the stack would fall under case (3), which is almost certainly not
what the user intends.
Fixes#1662.
Instead of simply converting a detailed diff entry that indicates an
update to an entire composite value as a simple old/new value diff,
compute the nested diff. This alllows us to render a per-element diff
for the nested object rather than simply displaying the new and the old
composite values.
This is necessary in order to improve diff rendering once
pulumi/pulumi-terraform#403 has been rolled out.
Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
@keen99 pointed out that newer versions of golangci-lint were failing
due to some spelling errors. This change fixes them up. We have also
now have a work item to track moving to a newer golangci-lint tool in
the future.
Fixes#2841
Currently if you log into s3://bucket/subdirectory, Pulumi will write
files to s3://bucket/.pulumi and not s3://bucket/subdirectory/.pulumi,
this corrects the error.
Recent changes to default provider semantics and the addition of
resource aliases allow a resource's provider reference to change even if
the resource itself is considered to have no diffs. `mustWrite` did not
expect this scenario, and indeed asserted against it. These changes
update `mustWrite` to detect such changes and require that the
checkpoint be written if and when they occur.
Fixes#2804.
This commit will expose the new `Invoke` routine that lists resource
outputs through the Node.js SDK.
This API is implemented via a new API, `EnumerablePromise`, which is a
collection of simple query primitives built onto the `Promise` API. The
query model is lazy and LINQ-like, and generally intended to make
`Promise` simpler to deal with in query scenarios. See #2601 for more
details.
Fixes#2600.
This commit touches an intersection of a few different provider-oriented
features that combined to cause a particularly severe bug that made it
impossible for users to upgrade provider versions without seeing
replacements with their resources.
For some context, Pulumi models all providers as resources and places
them in the snapshot like any other resource. Every resource has a
reference to the provider that created it. If a Pulumi program does not
specify a particular provider to use when performing a resource
operation, the Pulumi engine injects one automatically; these are called
"default providers" and are the most common ways that users end up with
providers in their snapshot. Default providers can be identified by
their name, which is always prefixed with "default".
Recently, in an effort to make the Pulumi engine more flexible with
provider versions, it was made possible for the engine to have multiple
default providers active for a provider of a particular type, which was
previously not possible. Because a provider is identified as a tuple of
package name and version, it was difficult to find a name for these
duplicate default providers that did not cause additional problems. The
provider versioning PR gave these default providers a name that was
derived from the version of the package. This proved to be a problem,
because when users upgraded from one version of a package to another,
this changed the name of their default provider which in turn caused all
of their resources created using that provider (read: everything) to be
replaced.
To combat this, this PR introduces a rule that the engine will apply
when diffing a resource to determine whether or not it needs to be
replaced: "If a resource's provider changes, and both old and new
providers are default providers whose properties do not require
replacement, proceed as if there were no diff." This allows the engine
to gracefully recognize and recover when a resource's default provider changes
names, as long as the provider's config has not changed.
Previously, when the CLI wanted to install a plugin, it used a special
method, `DownloadPlugin` on the `httpstate` backend to actually fetch
the tarball that had the plugin. The reason for this is largely tied
to history, at one point during a closed beta, we required presenting
an API key to download plugins (as a way to enforce folks outside the
beta could not download them) and because of that it was natural to
bake that functionality into the part of the code that interfaced with
the rest of the API from the Pulumi Service.
The downside here is that it means we need to host all the plugins on
`api.pulumi.com` which prevents community folks from being able to
easily write resource providers, since they have to manually manage
the process of downloading a provider to a machine and getting it on
the `$PATH` or putting it in the plugin cache.
To make this easier, we add a `--server` argument you can pass to
`pulumi plugin install` to control the URL that it attempts to fetch
the tarball from. We still have perscriptive guidence on how the
tarball must be
named (`pulumi-[<type>]-[<provider-name>]-vX.Y.Z.tar.gz`) but the base
URL can now be configured.
Folks publishing packages can use install scripts to run `pulumi
plugin install` passing a custom `--server` argument, if needed.
There are two improvements we can make to provide a nicer end to end
story here:
- We can augment the GetRequiredPlugins method on the language
provider to also return information about an optional server to use
when downloading the provider.
- We can pass information about a server to download plugins from as
part of a resource registration or creation of a first class
provider.
These help out in cases where for one reason or another where `pulumi
plugin install` doesn't get run before an update takes place and would
allow us to either do the right thing ahead of time or provide better
error messages with the correct `--server` argument. But, for now,
this unblocks a majority of the cases we care about and provides a
path forward for folks that want to develop and host their own
resource providers.
Adds a new resource option `aliases` which can be used to rename a resource. When making a breaking change to the name or type of a resource or component, the old name can be added to the list of `aliases` for a resource to ensure that existing resources will be migrated to the new name instead of being deleted and replaced with the new named resource.
There are two key places this change is implemented.
The first is the step generator in the engine. When computing whether there is an old version of a registered resource, we now take into account the aliases specified on the registered resource. That is, we first look up the resource by its new URN in the old state, and then by any aliases provided (in order). This can allow the resource to be matched as a (potential) update to an existing resource with a different URN.
The second is the core `Resource` constructor in the JavaScript (and soon Python) SDKs. This change ensures that when a parent resource is aliased, that all children implicitly inherit corresponding aliases. It is similar to how many other resource options are "inherited" implicitly from the parent.
Four specific scenarios are explicitly tested as part of this PR:
1. Renaming a resource
2. Adopting a resource into a component (as the owner of both component and consumption codebases)
3. Renaming a component instance (as the owner of the consumption codebase without changes to the component)
4. Changing the type of a component (as the owner of the component codebase without changes to the consumption codebase)
4. Combining (1) and (3) to make both changes to a resource at the same time
We model providers as resources in our state file, but we were
neglecting to set Outputs for these resources. This was problematic
when we started to try to run DiffConfig, because when diffing a
resource we compare thed new inputs and the old outputs, but the
resource never had any old outputs, so it was impossible for the
provider to see what the old state of the resource was.
To fix this, we now reflect the inputs we use the create the provider
reference as outputs on the resource.
* Introduce a new package under ciutil for individual CI systems. Split-out each CI system with env var detection for each.
* Add Bitbucket Piplines env var detection.
* Update changelog with note about adding Bitbucket Pipelines detection.
* Rename the CI system structs.
* Move files from ciutil/systems to ciutil. Un-export some types that don't need visibility beyond the ciutil package.
* Un-export DetectSystem function and the System type.
* Add a test for CI systems which we only know by name and nothing else, i.e. those with just a baseCI implementation.
The Kubernetes provider wanted to return Unimplemented for both
DiffConfig and CheckConfig. However, due to an interaction between the
package we used to construct the error we are returning and the
package we are using to actually construct the gRPC server for the
provider, we ended up in a place where the provider would actually end
up returning an error with code "Unknown", and the /text/ of the
message included information about it being due to the RPC not being
implemented.
So, when we try to call Diff/Check config on the provider, detect this
case as well and treat messages of this shape as if the provider just
returned "Unimplemented".
If --suppress-outputs is passed to `pulumi preview --json`, we
should not emit the stack outputs. This change fixespulumi/pulumi#2765.
Also adds a test case for this plus some variants of updates.
In 3621c01f4b, we implemented
CheckConfig/DiffConfig incorrectly. We should have explicilty added
the handlers (to supress the warnings we were getting) but returned an
error saying the RPC was not implemented. Instead, we just returned
success but passed back bogus data. This was "fine" at the time
because nothing called these methods.
Now that we are actually calling them, returning incorrect values
leads to errors in grpc. To deal with this we do two things:
1. Adjust the implementations in the dynamic provider to correctly
return not implemented. This allows us to pick up the default engine
behavior going forward.
2. Add some code in CheckConfig/DiffConfig that handle the gRPC error
that is returned when calling methods on the dynamic provider and fall
back to the legacy behavior. This means updating your CLI will not
cause issues for existing resources where the SDK has not been
updated.
For provider plugins, the gRPC interfaces expect that a URN would be
included as part of the DiffConfig/CheckConfig request, which means we
need to flow this value into our Provider interface.
This change does that.
A customer reported an issue where operations would fail with the
following error:
```
error: could not deserialize deployment: unknown secrets provider type
```
The problem here was the customer's deployment had a
`secrets_provider` section which looked like the following:
```
"secrets_providers": {
"type": ""
}
```
And so our code to try to construct a secrets manager from this thing
would fail, as our registry does not contain any information about a
provider with an empty type.
We do two things in this change:
1. When serializing a deployment, if there is no secrets manager,
don't even write the `secrets_provider` block. This helps for cases
where we are roundtripping deployments that did not have a provider
configured (i.e. they were older stacks that did not use secrets)
2. When deserializing, if we see an empty secrets provider like the
above, interpret it to mean "this deployment has no secrets". We set
up a decrypter such that if it ends up haiving secrets, we panic
eagerly (since this is a logical bug in our system somewhere).
We were not actually calling our colorization routines, which lead to
printing this very confusing text:
```
<{%reset%}> --outputs:--<{%reset%}>
```
When running updates with `--diff` or when drilling into details of a
proposed operation, like a refresh.
Providers from plugins require that configuration value be
strings. This means if we are passing a secret string to a
provider (for example, trying to configure a kubernetes provider based
on some secret kubeconfig) we need to be careful to remove the
"secretness" before actually making the calls into the provider.
Failure to do this resulted in errors saying that the provider
configuration values had to be strings, and of course, the values
logically where, they were just marked as secret strings
Fixes#2741
We have to actually return the value we compute instead of just
dropping it on the floor and treating the underlying values as
primitive.
I ran into this during dogfooding, the added test case would
previously panic.
We adopt a new algoritm for annotating secrets, which works as
follows:
If the source and destinations are both property maps, annotate their
secrets deeply.
Otherwise, if there is an property in both the input and output arrays
with the same name and the value in the inputs has secrets /anywhere/
in it, mark the output itself a secret.
This means, for example, an array in the inputs with a secret value as
one of the elmenets will mean in the outputs the entire array value is
marked as a secret. This is done because arrays often are treated as
sets by providers and so we really shouldn't consider ordering. It
also means that if a value is added to the array as part of the
operation we still mark the new array as an output even though the
values may not be indentical to the inputs.
For providers which do not natively support secrets (which is all of
them today), we annotate output values coming back from the provider
if there is a coresponding secret input in the inputs we passed in.
This logic was not tearing into rich objects, so if you passed a
secret as a member of an array or object into a resource provider, we
would lose the secretness on the way back.
Because of the interaction with Check (where we call Check and then
take the values returned by the provider as inputs for all calls to
Diff/Update), this would apply not only to the Output values of a
resource but also the Inputs (because the secret metadata would not
flow from the inputs of check to the outputs).
This change augments our logic which transfers secrets metadata from
one property map to another to handle these additional cases.
The change does two things:
- Reorders some calls in the CLI to prevent trying to create a secrets
manager twice (which would end up prompting twice).
- Adds a cache inside the passphrase secrets manager such that when
decrypting a deployment, we can re-use the one created earlier in
the update. This is sort of a hack, but is needed because otherwise
we would fail to decrypt the deployment, meaning that if you had a
secret value in your deployment *and* you were using local
passphrase encryption *and* you had not set PULUMI_CONFIG_PASSPHRASE
you would get an error asking you to do so.
Fixes#2729
This is helpful some round trip cases where we many not be able to
build the encrypter or decrypter but we will end up not needing
them. When we fail to load the manager, we return a manager that has
the correct state, but will error when it tries to preform any
operations. However, if there are no secrets in the deployment, these
methods will never be called and we'll be able to correctly roundtrip
checkpoints even without having access to the password (since there
were no secret values to decrypt or encrypt).
We were dropping new and old states on the floor instead of including
them as part of the previewed operation due to a logic error (we want
to append them when there are no errors from serialization, vs when
there are errors).
When creating a new stack using the local backend, the default
checkpoint has no deployment. That means there's a nil snapshot
created, which means our strategy of using the base snapshot's secrets
manager was not going to work. Trying to do so would result in a panic
because the baseSnapshot is nil in this case.
Using the secrets manager we are going to use to persist the snapshot
is a better idea anyhow, as that's what's actually going to be burned
into the deployment when we serialize the snapshot, so let's use that
instead.
In our system, we model secrets as outputs with an additional bit of
metadata that says they are secret. For Read and Register resource
calls, our RPC interface says if the client side of the interface can
handle secrets being returned (i.e. the language SDK knows how to
sniff for the special signiture and resolve the output with the
special bit set).
For Invoke, we have no such model. Instead, we return a `Promise<T>`
where T's shape has just regular property fields. There's no place
for us to tack the secretness onto, since there are no Outputs.
So, for now, don't even return secret values back across the invoke
channel. We can still take them as arguments (which is good) but we
can't even return secrets as part of invoke calls. This is not ideal,
but given the way we model these sources, there's no way around
this. Fortunately, the result of these invoke calls are not stored in
the checkpoint and since the type is not Output<T> it will be clear
that the underlying value is just present in plaintext. A user that
wants to pass the result of an invoke into a resource can turn an
existing property into a secret via `pulumi.secret`.
This change allows using the passphrase secrets manager when creating
a stack managed by the Pulumi service. `pulumi stack init`, `pulumi
new` and `pulumi up` all learned a new optional argument
`--secrets-provider` which can be set to "passphrase" to force the
passphrase based secrets provider to be used. When unset the default
secrets provider is used based on the backend (for local stacks this
is passphrase, for remote stacks, it is the key managed by the pulumi
service).
As part of this change, we also initialize the secrets manager when a
stack is created, instead of waiting for the first time a secret
config value is stored. We do this so that if an update is run using
`pulumi.secret` before any secret configuration values are used, we
already have the correct encryption method selected for a stack.
We move the implementations of our secrets managers in to
`pkg/secrets` (which is where the base64 one lives) and wire their use
up during deserialization.
It's a little unfortunate that for the passphrase based secrets
manager, we have to require `PULUMI_CONFIG_PASSPHRASE` when
constructing it from state, but we can make more progress with the
changes as they are now, and I think we can come up with some ways to
mitigate this problem a bit (at least make it only a problem for cases
where you are trying to take a stack reference to another stack that
is managed with local encryption).
Logs are no longer provided by the service (this is a holdover from
the PPC days where service deployments where done in the cloud and it
handled collecting logs).
Removing this breaks another cycle that would be introduced with the
next change (in our test code)
The next change is going to do some code motion that would create some
circular imports if we did not do this. There was nothing that
required the members we were moving be in the backend package, so it
was easy enough to pull them out.
When preforming an update, require that a secrets manager is passed in
as part of the `backend.UpdateOperation` bag and use it. The CLI now
passes this in (it still uses the default base64 secrets manager, so
this is just code motion into a high layer, since the CLI will be the
one to choose what secrets manager to use based on project settings).
There are a few operations we do (stack rename, importing and edits)
where we will materialize a `deploy.Snapshot` from an existing
deployment, mutate it in somewhay, and then store it.
In these cases, we will just re-use the secrets manager that was used
to build the snapshot when we re-serialize it. This is less than ideal
in some cases, because many of these operations could run on an
"encrypted" copy of the Snapshot, where Inputs and Outputs have not
been decrypted.
Unfortunately, our system now is not set up in a great way to support
this and adding something like a `deploy.EncryptedSnapshot` would
require large scale code duplications.
So, for now, we'll take the hit of decrypting and re-encrypting, but
long term introducing a `deploy.EncryptedSnapshot` may be nice as it
would let us elide the encryption/decryption steps in some places and
would also make it clear what parts of our system have access to the
plaintext values of secrets.
We have many cases where we want to do the following:
deployment -> snapshot -> process snapshot -> deployment
We now retain information in the snapshot about the secrets manager
that was used to construct it, so in these round trip cases, we can
re-use the existing manager.
When nil, it means no information is retained in the deployment about
the manager (as there is none) and any attempt to persist secret
values fails.
This should only be used in cases where the snapshot is known to not
contain secret values.
Half of the call sites didn't care about these values and with the
secrets work the ergonmics of calling this method when it has to
return serialized ouputs isn't great. Move the serialization for this
into the CLI itself, as it was the only place that cared to do
this (so it could display things to end users).
The previous changes to remove config loading out of the backend means
that the backends no longer need to track this information, as they
never use it.
As part of the pluggable secrets work, the crypter's used for secrets
are no longer tied to a backend. To enforce this, we remove the
`backend.GetStackCrypter` function and then have the relevent logic to
construct one live inside the CLI itself.
Right now the CLI still uses the backend type to decide what Crypter
to build, but we'll change that shortly.
We require configuration to preform updates (as well as previews,
destroys and refreshes). Because of how everything evolved, loading
this configuration (and finding the coresponding decrypter) was
implemented in both the file and http backends, which wasn't great.
Refactor things such that the CLI itself builds out this information
and passes it along to the backend to preform operations. This means
less code duplicated between backends and less places the backend
assume things about the existence of `Pulumi.yaml` files and in
general makes the interface more plesent to use for others uses.
For cloud backed stacks, this was already returning nil and due to the
fact that we no longer include config in the checkpoint for local
stacks, it was nil there as well.
Removing this helps clean stuff up and is should make some future
refactorings around custom secret managers easier to land.
We can always add it back later if we miss it (and make it actually do
the right thing!)
When constructing a Deployment (which is a plaintext representation of
a Snapshot), ensure that we encrypt secret values. To do so, we
introduce a new type `secrets.Manager` which is able to encrypt and
decrypt values. In addition, it is able to reflect information about
itself that can be stored in the deployment such that we can
deserialize the deployment into a snapshot (decrypting the values in
the process) without external knowledge about how it was encrypted.
The ability to do this is import for allowing stack references to
work, since two stacks may not use the same manager (or they will use
the same type of manager, but have different state).
The state value is stored in plaintext in the deployment, so it **must
not** contain sensitive data.
A sample manager, which just base64 encodes and decodes strings is
provided, as it useful for testing. We will allow it to be varried
soon.
When a provider does not natively understand secrets, we need to pass
inputs as raw values, as to not confuse it.
This leads to a not great experience by default, where we pass raw
values to `Check` and then use the results as the inputs to remaining
operations. This means that by default, we don't end up retaining
information about secrets in the checkpoint, since the call to `Check`
erases all of our information about secrets.
To provide a nicer experience we were don't lose information about
secrets even in cases where providers don't natively understand them,
we take property maps produced by the provider and mark any values in
them that are not listed as secret as secret if the coresponding input
was a secret.
This ensures that any secret property values in the inputs are
reflected back into the outputs, even for providers that don't
understand secrets natively.
A new `Secret` property value is introduced, and plumbed across the
engine.
- When Unmarshalling properties /from/ RPC calls, we instruct the
marshaller to retain secrets, since we now understand them in the
rest of the engine.
- When Marshalling properties /to/ RPC calls, we use or tracked data
to understand if the other side of the connection can accept
secrets. If they can, we marshall them in a similar manner to assets
where we have a special object with a signiture specific for secrets
and an underlying value (which is the /plaintext/ value). In cases
where the other end of the connection does not understand secrets,
we just drop the metadata and marshal the underlying value as we
normally would.
- Any secrets that are passed across the engine events boundary are
presently passed as just `[secret]`.
- When persisting secret values as part of a deployment, we use a rich
object so that we can track the value is a secret, but right now the
underlying value is not actually encrypted.
* Add a var for PRNumber. Add an environment metadata key for PR number.
* Move the detection of PULUMI_CI_SYSTEM into vars.DetectVars(). Set the PRNumber CI property based on respective env vars from each CI system.
* Add Azure Pipelines build variables.
* Add tests for DetectVars.
* Added changelog entry for Azure Pipelines.
* Capture the value of env var being modified for the ciutil unit test, and restore their values at the end of them.
* Simplify the DetectVars function by moving the Pulumi CI system code into the switch-case expression.
* Rename the Pulumi CI system to Generic CI. Include the GenericCI system in the test case for DetectVars.
We changed the `pulumi update` command to be `pulumi up` a while back
(`update` is an alias of `up`). This change just makes it so we refer to
the actual command, `pulumi up`, instead of the older `pulumi update`.
In previous commits, we have changed the language plugin protocol to
allow the host to communicate that the plugin is meant to boot in "query
mode." In nodejs, this involves not doing things like registering the
default stack resource. This commit will implement this functionality.
This command exposes a new resource `Invoke` operation,
`pulumi:pulumi:readStackResourceOutputs` which retrieves all resource
outputs for some user-specified stack, not including those deleted.
Fixes#2600.
Because `pulumi query` is not implemented with the update
infrastructure, it is important that we *not* do things like open an
update when the query program runs.
This commit will thus implement the "query" path in the state backend in
a completely parallel universe. Conceptually, this is much like the
update path, but with a conspicuous lack of any connection to the
backend service.
`pulumi query` is designed, essentially, as a souped-up `exec`. We
execute a query program, and add a few convenience constructs (e.g., the
default providers that give you access to things like `getStack`).
Early in the design process, we decided to not re-use the `up`/update
path, both to minimize risk to update operations, and to simplify the
implementation.
This commit will add this "parallel query universe" into the engine
package. In particular, this includes:
* `QuerySource`, which executes the language provider running the query
program, and providing it with some simple constructs, such as the
default provider, which provides access to `getStack`. This is much
like a very simplified `EvalSource`, though notably without any of the
planning/step execution machinery.
* `queryResmon`, which disallows all resource operations, except the
`Invoke` that retrieves the resource outputs of some stack's last
snapshot. This is much like a simplified `resmon`, but without any of
the provider resolution, and without and support for resource
operations generally.
* Various static functions that pull together miscellaneous things
needed to execute a query program. Notably, this includes gathering
language plugins.
`pulumi query` needs to exec a query program in some directory, just as
`pulumi up` does. But, it won't use the planning/step execution
machinery at all. One small piece these two paths have in common is that
they both can use the `planResult#Chdir`. So, this commit will move this
to `fsutil` so they can both use it.
The Pulumi CLI currently has two "display modes" -- one for rendering
diffs and one for rendering program updates. Neither of these is
particularly well-suited to `pulumi query`, which essentially needs to
render stdout from the query program verbatim.
This commit will add a separate display mode for this purpose:
* In interactive mode, `pulumi query` will use the display spinner to
say "running query". In non-interactive mode, this will be omitted.
* Query mode will print stdout from the query program verbatim, but
ignore `diag.Infoerr` so that they're not double-printed when they're
emitted again as error events.
* Query mode also does not double-print newlines at the end of diag
events.
This change adds a --json flag to the preview command, enabling
basic JSON serialization of preview plans. This effectively flattens
the engine event stream into a preview structure that contains a list
of steps, diagnostics, and summary information. Each step contains
the deep serialization of resource state, in addition to metadata about
the step, such as what kind of operation it entails.
This is a partial implementation of pulumi/pulumi#2390. In particular,
we only support --json on the `preview` command itself, and not `up`,
meaning that it isn't possible to serialize the result of an actual
deployment yet (thereby limiting what you can do with outputs, etc).
This change adds a --json flag to the preview command, enabling
basic JSON serialization of preview plans. This effectively flattens
the engine event stream into a preview structure that contains a list
of steps, diagnostics, and summary information. Each step contains
the deep serialization of resource state, in addition to metadata about
the step, such as what kind of operation it entails.
This is a partial implementation of pulumi/pulumi#2390. In particular,
we only support --json on the `preview` command itself, and not `up`,
meaning that it isn't possible to serialize the result of an actual
deployment yet (thereby limiting what you can do with outputs, etc).
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
Fixes#2650.
We have historically relied on merging inputs and outputs in several places in the engine. This used to be necessary, as discussed in #2650 (comment), but our core engine model has moved away from depending on this. However, we still have a couple places we do this merge, and those places have triggered several severe issues recently in subtle cases.
We believe that this merging should no longer be needed for a correct interpretation of the current engine model, and indeed that doing the merge actively violates the contract with providers. In this PR we remove the remaining places where this input + output merge was being done. In all three cases, we use just the Outputs, which for most providers will already include the same values as the inputs - but correctly as determined by the provider itself.
* Load specific provider versions if requested
As part of pulumi/pulumi#2389, we need the ability for language hosts to
tell the engine that a particular resource registration, read, or invoke
needs to use a particular version of a resource provider. This was not
previously possible before; the engine prior to this commit loaded
plugins from a default provider map, which was inferred for every
resource provider based on the contents of a user's package.json, and
was itself prone to bugs.
This PR adds the engine support needed for language hosts to request a
particular version of a provider. If this occurs, the source evaluator
specifically records the intent to load a provider with a given version
and produces a "default" provider registration that requests exactly
that version. This allows the source evaluator to produce multiple
default providers for a signle package, which was previously not
possible.
This is accomplished by having the source evaluator deal in the
"ProviderRequest" type, which is a tuple of version and package. A
request to load a provider whose version matches the package of a
previously loaded provider will re-use the existing default provider. If
the version was not previously loaded, a new default provider is
injected.
* CR Feedback: raise error if semver is invalid
* CR: call String() if you want a hash key
* Update pkg/resource/deploy/providers/provider.go
Co-Authored-By: swgillespie <sean@pulumi.com>
Fixes#2633.
Currently when a user runs `refresh` and a resource is in a state of
error, the `refresh` will fail and the resource state will not be
persisted. This can make it vastly harder to incrementally fix
infrastructure. The issue mentioned above explains more of the
historical context, as well as some specific failure modes.
This commit resolves this issue by causing refresh to *not* report an
error in this case, and instead to simply log a warning that the
`refresh` has recognized that the resource is in an unhealthy state
during state sync.
This commit switches from dep to Go 1.12 modules for tracking Pulumi
dependencies. Rather than _building_ using Go modules, we instead use the `go
mod vendor` command to populate a vendor tree in the same way as `dep ensure`
was previously doing.
In order to prevent checksum mismatches, it was necessary to also update CI to
use Go 1.12 instead of 1.11 - which also necessitated fixing some linting errors
which appeared with the upgraded golangci-lint for 1.12.
This change adds an operations provider for GCP. Right now, it can
just collect logs from google cloud functions, similar to `gcloud
functions logs read`
A linter was correctly detecting a case where we were we were doing an
unneeded nil check on `err`. The previous clause in the if/else block
ensures that `err` is non nil.
Our logic for how we handled `.tar.gz` archives meant that any other
type of file that had a dot in the filename would not be detected
correctly.
Fixes#2589
Use `result.Result` in more places, so when a confirmation prompt is
declined, we just return `result.Bail()` after printing a message
without the `error: ` prefix.
Fixes#2070
* Load default providers deterministically
This commit adds a new algorithm for deriving a list of default
providers from the set of plugins reported from the language host and
from the snapshot. If the language host reports a set of plugins,
default providers are sourced directly from that set, otherwise default
providers are sourced from the full set of plugins, including ones from
the snapshot.
When multiple versions of the same provider are requested, the newest
version of that provider is always select as the default provider.
* Add CHANGELOG.md entry
* Skip the language host's plugins if it reports no resource plugins
* CR feedback
* CR: Log when skipping non resource plugin
`pulumi stack rename` allows you to change the name of an existing
stack. This operation is non-distructive, however it is possible that
the next update will show additional changes to resources, if the
pulumi program uses the value of `getStack()` as part of a resource
name.
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
Various providers use properties that begin with "__" to represent
internal metadata that should not be presented to the user. These
changes look for such properties and elide them when displaying diffs.
This commit re-uses an error reporting mechanism previously used when
the plugin loader fails to locate a plugin that is compatible with the
requested plugin version. In addition to specifying what version we
attempted to load, it also outputs a command that will install the
missing plugin.
`edit.RenameStack` walks a Snapshot and rewrites all of the parts
where a stack name is present (URNs, the ID of the top level Stack
resource, providers)
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
If a provider returns information about the top-level properties that
differ, use those keys to filter the diffs that are rendered to the
user.
Fixes#2453.
* Look for exact match when loading plugins
Pulumi's current behavior when loading plugins is surprising in that it
will attempt to load the "latest" provider binary instead of exactly the
version that was requested. Since provider binaries and provider
packages are tied together and versioned together, this is going to be
problematic if a provider makes a breaking change.
Although there are other issues in this area, this commit fixes the
arguably bug-like behavior of loading the latest plugin and instead opts
to load the plugin that exactly the requested semver range. Today, the
engine will never ask for anything other than an exact version match.
Since this is a breaking change, this commit also includes an
environment variable that allows users to return back to the "old"
plugin loading behavior if they are broken. The intention is that this
escape hatch can be removed in a future release once we are confident
that this change does not break people.
* CR feedback
* Use SelectCompatiblePlugin for HasPluginGTE check
* Decrease log level for HTTP requests and responses
Logging each HTTP request and response can get quite chatty, especially
when publishing a lot of events. This increases the verbosity level of
these logs so that they don't get emitted at level 9, which is the
general level that providers use when issuing verbose logs.
* Appease linter
We previously logged the number of replaces and changes returned from a call to Diff, but not the actual properties that were forcing replace. Several times we've had to debug issues with unexpected replaces being proposed, and this information is very useful to have access to.
Changes the verbose logging to include the property names for both replaces and changes instead of just the count.
* Enable delete parallelism for Python
* Add CHANGELOG.md entry
* Expand changelog message - upgrade to Python 3
* Rework stack rm test
The service now allows removing a stack if it just contains the top
level `pulumi:pulumi:Stack` resource, so we need to actually create
another resource before `stack rm` fails telling you to pass
`--force`.
Fixes#2444
When `pulumi stack rm` is run against a stack with resources, the
service will respond with an error if `--force` is not
passed. Previously we would just dump the contents of this error and
it looked something like:
`error: [400] Bad Request: Stack still has resources.`
We now handle this case more gracefully, showing our usual "this stack
still has resources" error like we would for the local backend.
Fixes#2431
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
In general, a "delete" in Pulumi is destroying an actual physical
resource. In the case of a read resource, however, the delete is
merely removing the resource from the stack; the physical resource
is not affected. These changes attempt to clarify this situation by
using the term "discard" rather than "delete".
Fixes#2015.
Because of the change to include a stack's project as part of its
identity in the service, the names passed to StackReference now
require the project name as well.
Improve the error message when they do not include them.
- Add support for per-property dependencies to the Go SDK
- Add tests for first-class secret rejection in the checkpoint and RPC
layers and language SDKs
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
The service also does this filtering on requests, because we'll need
to support older clients, but it would be nice if the CLI itself also
cleaned things up.
This change starts to use a stack's project name as part of it's
identity when talking to the cloud backend, which the Pulumi Service
now supports.
When displaying or parsing stack names for the cloud backend, we now
support the following schemes:
`<stack-name>`
`<owner-name>/<stack-name>`
`<owner-name>/<project-name>/<stack-name>`
When the owner is not specificed, we assume the currently logged in
user (as we did before). When the project name is not specificed, we
use the current project (and fail if we can't find a `Pulumi.yaml`)
Fixes#2039
Resources gain two new fields: `PropertyDependencies` and
`PendingReplacement`. The former maps an input property's name to the
dependencies that may affect the value of that property. The latter is
used to track resources that have been deleted as part of a
delete-before-replace operation but have not yet been recreated.
In addition to the new fields, resource properties may now contain
encrypted first-class secret values. These values are of type `SecretV1`,
where the `Sig` field is set to `resource.SecretSig`.
Finally, the deployment type gains a new field, `SecretsProviders`,
which contains any configuration necessary to handle secrets that may be
present in resource properties.
* Use both a in-proc and out-of-proc pipenv lock
Turns out that flock alone is not sufficient to guarantee exclusive
access to a resource within a single process. To remedy this, a few
FileMutex type wraps both an in-proc mutex and an out-of-proc
file-backed mutex to achieve the goal of exclusive access to a resource
in both in-proc and out-of-proc scenarios.
This commit also uses this lock globally in the integration test
framework in order to globally serialize invocations of pipenv install.
* Remove merge markers
* Use a file lock for serializing pipenv installs
A in-process mutex is not sufficient for serializing pipenv installs
because the 1) go test runner occasionally will split test executions
into multiple processes and 2) each test gets an instance of a
programTester and we'd need to share the mutex globally if we wanted to
successfully serialize access to the pipenv install command.
* Please linter
When constructing an Archive based off a directory path, we would
ignore any symlinks that we saw while walking the file system
collecting files to include in the archive.
A user reported an issue where they were unable to use the
[sharp](https://www.npmjs.com/package/sharp) library from NPM with a
lambda deployed via Pulumi. The problem was that the library includes
native components, and these native components include a bunch of
`*.so` files. As is common, there's a regular file with a name like
`foo.so.1.2.3` and then symlinks to that file with the names
`foo.so.1.2`, `foo.so.1` and `foo.so`. Consumers of these SOs will
try to load the shorter names, i.e. `foo.so` and expect the symlink to
resolve to the actual library.
When these links are not present, upstack code fails to load.
This changes modifies our logic such that if we have a symlink and it
points to a regular file, we include it in the archive. At this time,
we don't try to add it to the archive as a symlink, instead we just
add it as another copy of the regular file. We could explore trying to
include these things as symlinks in archive formats that allow
them (While zip does support this, I'm less sure doing this for zip
files will be a great idea, given the set of tricks we already play to
ensure our zip files are usable across many cloud vendors serverless
offerings, it feels like throwing symlinks into the mix may end up
causing even more downstream weirdness).
We continue to ignore symlinks which point at directories. In
practice, these seem fairly uncommon and doing so lets us not worry
about trying to deal with ensuring we don't end up chasing our tail in
cases where there are circular references.
While this change is in pulumi/pulumi, the downstream resource
providers will need to update their vendored dependencies in order to
pick this up and have it work end to end.
Fixes#2077
setuptools's "develop" action is not safe to run concurrently when
targeting the same source tree. In order to work around this, this
commit explicitly serializes package installations.
- Ensure new projects have a project name in line with what we'd like
to enforce going forward
- Do more aggresive validation during the interactive prompts during
`pulumi new`
- Fix an issue where the interactive prompt rendered weridly when
there was a validation error
Contributes to #1988Fixes#1441
We continue to do so when `--debug` has been passed, similar to how
these events are elided from the local display when you are not in a
debug context.
* Initial stack history command
* Adding use of color pkg, adding background colors to color pkg, and removing extra stack output
* gofmt-ed colors file
* Fixing format and removing JSON output
* Fixing nits, changing output for environment, and adding some tests
* fixing failing history test
This value was never used before, but it had a shorter name. In other
API Types we are using `projectName` which we all prefer. Since we are
going to start using this value going forward, let's adopt the good
name now when it won't break anyone.
This will allow the service to include information about what project
a stack is assocated with when listing all stacks a user has access
to.
This was not previously needed because the project did not play into
the stack identity, but it will shortly.
This test had been intermittently failing due to a race condition. Its
implementation of `plugin.Provider.Read` was intended to ensure that
the cancellation of a refresh operation occurred. As written, it was
only able to ensure that the cancellation was requested.
These changes ensure that cancellation has been acknowledged by the engine by
implementing providing an implementation for `plugin.Provider.Cancel`
that closes a channel on which the implementation of `Read` waits.
We're changing /account to redirect to /account/profile instead of
/account/tokens as the user profile settings are a more natural place
to land when going into account settings.
This commit changes the CLI to link
directly to /account/tokens, avoiding having to click on
"Access Tokens" to go to the tokens page to get an access token when
coming from the URL outputted by the CLI.
When returning immediately from the loop, we are closing the `done` channel early. This signals that we have finished processing every engine event, however that isn't true. Since some events may still be in-flight in `recordEngineEvent`. (This could potentially lead to a race condition in the `diag.Sink` passed to the API client used to record the call.)
This ensures that the gRPC server is properly shut down. This fixes an
issue in which a resource plugin that is still configuring could report
log messages to the plugin host, which would in turn attempt to send
diagnostic packets over a closed channel, causing a panic.
Fixes#2170.
The event rendering goroutine in the remote backend was not properly
synchronizing with the goroutine that created it, and could continue
executing after its creator finished. I believe that this is the root
cause of #1850.
When reading values like access keys or secrets from the terminal, we
would use the `terminal.ReadPassword` function to ensure characters
the user typed were not echo'd back to the console, as a convience.
When standard input was not connected to a tty (which would happen in
some cases like in docker when -t was not passed or in CI), this would
fail with an error about an bad ioctl. Update our logic such that
when standard in is not connected to a terminal, we just read input
normally.
While I was in the area, I unified the code for Windows and *NIX for
these functions.
Fixes#2017
This option allows the user to override the file used to fetch and store
configuration information for a stack. It is available for the config,
destroy, logs, preview, refresh, and up commands.
Note that this option is not persistent: if it is not specified, the
stack's default configuration will be used. If an alternate config file
is used exclusively for a stack, it must be specified to all commands
that interact with that stack.
This option can be used to share plaintext configuration across multiple
stacks. It cannot be used to share secret configuration, as secrets are
associated with a particular stack and cannot be decryptex by other
stacks.
When the install fails, we end up printing the entire contents of
yarn's stdout to stdout. This output can often be quite long and will
cause Travis to fail in some cases.
The regular error output should be sufficent for us to diagnose any
issues we'll face.
Add a new property to ProgramTestOptions, `Overrides` that allows a
test to request a different version of a package is used instead of
what would be listed in the package.json file.
This will be used by our nightly automation to run everything "at head"
Semver allows you to attach "build metadata" to a version by appending
the version with `+` and then metadata. In #2216 we started to take
advantage of this as the place to put the git commit information,
instead of including it as part of the "version". This is more in line
with what Semver expects to be done, because git commit information
isn't orderable.
Because of this, we started to publish plugins with versions like
`v0.16.5-dev.1542649729+g07d8224`. However, our logic for discovering
plugins in the cache did an initial filtering based on folder names in
the cache and the regex did not allow a + in the "version" field.
This meant that from the point of view of the cache, the plugin was
not present. This would lead to very confusing behavior where
something like `pulumi plugin install resource azure
v0.16.5-dev.1542649729+g07d8224` would download the plugin, but
`pulumi plugin ls` would not see it and attempting to do an update
with it would fail with an error saying the plugin was not installed.
This change relaxes the regular expression to allow it to match these
sorts of paths. We still use the `semver` library to ensure that the
version we've extracted from the directory name is a valid semver.
After #2088, we began calling `Diff` on providers that are not configured
due to unknown configuration values. This hit an assertion intended to
detect exactly this scenario, which was previously unexpected.
These changes adjust `Diff` to indicate that a Diff is unavailable and
return an error message that describes why. The step generator then
interprets the diff as indicating a normal update and issues the error
message to the diagnostic stream.
Fixes#2223.
Configuration keys are simple namespace/name pairs, delimited by
":". For compatability, we also allow
"<namespace>:config:<name>", but we always record the "nice" name in
`Pulumi.<stack-name>.yaml`.
While `pulumi config` and friends would block setting a key like
`a🅱️c` (where the "name" has a colon in it), it would allow
`a:config:b:c`. However, this would be recorded as `a🅱️c` in
`Pulumi.<stack-name>.yaml`, which meant we'd error when parsing the
configuration file later.
To work around this, disallow ":" in the "name" part of a
configuration key. With this change the following all work:
```
keyName
my-project:keyName
my-project:config:keyName
```
However, both
`my-project:keyName:subKey`
`my-project:config:keyName:subKey`
are now disallowed.
I considered allowing colons in subkeys, but I think it adds more
confusion (due to the interaction with how we allow you elide the
project name in the default case) than is worthwhile at this point.
Fixes#2171
When launching plugins today, `pulumi` looks in two places:
1. It looks to see if the plugin in on the $PATH and if so, uses
it. This makes it easy to force a specific version of a resource
provider to be used and is what happens at development time (since
resource providers make their way onto $PATH via GOBIN).
2. If the above fails, it looks in the "plugin cache" in
`~/.pulumi/plugins`. This is the location that `pulumi plugin
install` places plugins.
Unlike resource provider plugins, we don't yet deliver language
plugins via `pulumi plugin install` so the language provider plugins
must be on the `$PATH` to be found. This is okay, because when we ship
the SDK, we include the executables next to `pulumi` itself.
However, if a user chooses to not put `pulumi` on their $PATH, or they
do but it is a symlink to the real `pulumi` binary installed
somewhere, we'd fail to find the language plugins, since they would
not be on the `$PATH`
To address this, when probing for language plugins, also consider
binaries next to the currently running `pulumi` process.
Fixes#1956
While the lifecycle tests wrote a `.yarnrc` file to ensure that copies
of `yarn` did not race with one another, the more barebones testing
framework did not.
This should address some of the yarn issues we've been seeing in CI
recently
Under our old versioning system, when we started a new point release,
we'd tag the HEAD commit of master with a tag like `v0.16.6-dev` and
our scripts would use this to generate a new version number. This
required a great deal of gymnastics when producing a release and
caused us to litter these -dev tags everywhere.
To improve this, we change version number generation to the following
strategy:
1. If the commit we are building has a tag applied to it, use that tag
as the version (appending the dirty bit metadata to the version, if
needed).
2. If the commit we are bulding does not have a tag applied to it,
take the version from the next reachable tag, increment the patch
version and then append the `-dev` pre-release tag. As part of this,
we also make a slight tweek to our semver generation such that instead
of `-dev<TIMESTAMP>` we use `-dev.<TIMESTAMP>` which is more in line
with what semver recommends.
The issue is related to this code:
https://github.com/pulumi/pulumi/blob/v0.16.4/pkg/workspace/plugins.go#L155-L195
Note that we use `defer` to ensure we close our handle to the file we
are unpacking when we encounter a file in the tarball. However, the
defers don't run until the containing function ends, so when we go to
do the rename, or process still has a bunch of open file handles, which
prevents the directory from being renamed because it is "in use".
By doing all of the work in an anonymous function, we ensure that the
defer statements run before we go to rename the directory
Fixes#2217
This is code that should have been part of #2211 but was accidently
dropped during a rebase when responding to CR feedback.
When two installs for the same plugin are racing, the second one will
see the destination directory already exists and fail. We can safely
ignore this error.
These changes add a new resource to the Pulumi SDK,
`pulumi.StackReference`, that represents a reference to another stack.
This resource has an output property, `outputs`, that contains the
complete set of outputs for the referenced stack. The Pulumi account
performing the deployment that creates a `StackReference` must have
access to the referenced stack or the call will fail.
This resource is implemented by a builtin provider managed by the engine.
This provider will be used for any custom resources and invokes inside
the `pulumi:pulumi` module. Currently this provider supports only the
`pulumi:pulumi:StackReference` resource.
Fixes#109.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
The lockfile is not super interesting when running the lifecycle
tests, since the test project is not a long lived artifact. There was
no real harm in writing it, exepct that in some cases `pipenv` gets
very confused when you have dependencies on pre-release
versions (which is the case right now as we are brining up Python 3).
The packages are still installed correctly, even when we don't write a
lock file.
* Fix Python support in integration test framework
Update the integratino test framework to use pipenv to bootstrap new
virtual environments for tests and use those virtual environments to run
pulumi update and pulumi preview.
Fixespulumi/pulumi#2138
* Install packages via 'Dependencies' field
* Remove code for installing packages from Dependencies
In preparation for some workspace restructuring, I decided to scratch a
few itches of my own in the code:
* Change project's RuntimeInfo field to just Runtime, to match the
serialized name in JSON/YAML.
* Eliminate the no-longer-used Context and NoDefaultIgnores fields on
project, and all of the associated legacy PPC-related code.
* Eliminate the no-longer-used IgnoreFile constant.
* Remove a bunch of "// nolint: lll" annotations, and simply format
the structures with comments on dedicated lines, to avoid overly
lengthy lines and lint suppressions.
* Mark Dependencies and InitErrors as `omitempty` in the JSON
serialization directives for CheckpointV2 files. This was done for
the YAML directives, but (presumably accidentally) omitted for JSON.