Thse changes make a subtle but critical adjustment to the process the
Pulumi engine uses to determine whether or not a difference exists
between a resource's actual and desired states, and adjusts the way this
difference is calculated and displayed accordingly.
Today, the Pulumi engine get the first chance to decide whether or not
there is a difference between a resource's actual and desired states. It
does this by comparing the current set of inputs for a resource (i.e.
the inputs from the running Pulumi program) with the last set of inputs
used to update the resource. If there is no difference between the old
and new inputs, the engine decides that no change is necessary without
consulting the resource's provider. Only if there are changes does the
engine consult the resource's provider for more information about the
difference. This can be problematic for a number of reasons:
- Not all providers do input-input comparison; some do input-state
comparison
- Not all providers are able to update the last deployed set of inputs
when performing a refresh
- Some providers--either intentionally or due to bugs--may see changes
in resources whose inputs have not changed
All of these situations are confusing at the very least, and the first
is problematic with respect to correctness. Furthermore, the display
code only renders diffs it observes rather than rendering the diffs
observed by the provider, which can obscure the actual changes detected
at runtime.
These changes address both of these issues:
- Rather than comparing the current inputs against the last inputs
before calling a resource provider's Diff function, the engine calls
the Diff function in all cases.
- Providers may now return a list of properties that differ between the
requested and actual state and the way in which they differ. This
information will then be used by the CLI to render the diff
appropriately. A provider may also indicate that a particular diff is
between old and new inputs rather than old state and new inputs.
Fixes#2453.
This commit touches an intersection of a few different provider-oriented
features that combined to cause a particularly severe bug that made it
impossible for users to upgrade provider versions without seeing
replacements with their resources.
For some context, Pulumi models all providers as resources and places
them in the snapshot like any other resource. Every resource has a
reference to the provider that created it. If a Pulumi program does not
specify a particular provider to use when performing a resource
operation, the Pulumi engine injects one automatically; these are called
"default providers" and are the most common ways that users end up with
providers in their snapshot. Default providers can be identified by
their name, which is always prefixed with "default".
Recently, in an effort to make the Pulumi engine more flexible with
provider versions, it was made possible for the engine to have multiple
default providers active for a provider of a particular type, which was
previously not possible. Because a provider is identified as a tuple of
package name and version, it was difficult to find a name for these
duplicate default providers that did not cause additional problems. The
provider versioning PR gave these default providers a name that was
derived from the version of the package. This proved to be a problem,
because when users upgraded from one version of a package to another,
this changed the name of their default provider which in turn caused all
of their resources created using that provider (read: everything) to be
replaced.
To combat this, this PR introduces a rule that the engine will apply
when diffing a resource to determine whether or not it needs to be
replaced: "If a resource's provider changes, and both old and new
providers are default providers whose properties do not require
replacement, proceed as if there were no diff." This allows the engine
to gracefully recognize and recover when a resource's default provider changes
names, as long as the provider's config has not changed.
`pulumi query` needs to exec a query program in some directory, just as
`pulumi up` does. But, it won't use the planning/step execution
machinery at all. One small piece these two paths have in common is that
they both can use the `planResult#Chdir`. So, this commit will move this
to `fsutil` so they can both use it.
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
This ensures that the gRPC server is properly shut down. This fixes an
issue in which a resource plugin that is still configuring could report
log messages to the plugin host, which would in turn attempt to send
diagnostic packets over a closed channel, causing a panic.
Fixes#2170.
These changes add a new resource to the Pulumi SDK,
`pulumi.StackReference`, that represents a reference to another stack.
This resource has an output property, `outputs`, that contains the
complete set of outputs for the referenced stack. The Pulumi account
performing the deployment that creates a `StackReference` must have
access to the referenced stack or the call will fail.
This resource is implemented by a builtin provider managed by the engine.
This provider will be used for any custom resources and invokes inside
the `pulumi:pulumi` module. Currently this provider supports only the
`pulumi:pulumi:StackReference` resource.
Fixes#109.
In preparation for some workspace restructuring, I decided to scratch a
few itches of my own in the code:
* Change project's RuntimeInfo field to just Runtime, to match the
serialized name in JSON/YAML.
* Eliminate the no-longer-used Context and NoDefaultIgnores fields on
project, and all of the associated legacy PPC-related code.
* Eliminate the no-longer-used IgnoreFile constant.
* Remove a bunch of "// nolint: lll" annotations, and simply format
the structures with comments on dedicated lines, to avoid overly
lengthy lines and lint suppressions.
* Mark Dependencies and InitErrors as `omitempty` in the JSON
serialization directives for CheckpointV2 files. This was done for
the YAML directives, but (presumably accidentally) omitted for JSON.
* Process deletions conservatively in parallel
This commit allows the engine to conservatively delete resources in
parallel when it is sure that it is legal to do so. In the absence of a
true data-flow oriented step scheduler, this approach provides a
significant improvement over the existing serial deletion mechanism.
Instead of processing deletes serially, this commit will partition the
set of condemned resources into sets of resources that are known to be
legally deletable in parallel. The step executor will then execute those
independent lists of steps one-by-one until all steps are complete.
* CR: Make ResourceSet a normal map
* Only use the dependency graph if we can trust it
* Reverse polarity of pendingDeletesAreReplaces
* CR: un-export a few types
* CR: simplify control flow in step generator when scheduling
* CR: parents are dependencies, fix loop index
* CR: Remove ParentOf, add new test for parent dependencies
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
These changes simplify a couple aspects of plan execution in the hopes of
clarifying some responsibilities and preparing the code for changes to the
implementation of refresh.
1. All aspects of plan execution are now managed by the plan executor,
which is no longer exported. Instead, it is abstracted behind
`Plan.Execute`.
2. The plan executor's error-handling and reporting have been unified
and simplified somewhat.
The belief is that this hides some complexity that we shouldn't be
exposing in the default case.
In order to filter these events from both the diff/progress display
and the resource change summary, we perform this filtering in
`pkg/engine`.
Fixes#1733.
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Execute chains of steps in parallel
Fixespulumi/pulumi#1624. Since register resource steps are known to be
ready to execute the moment the engine sees them, we can effectively
parallelize all incoming step chains. This commit adds the machinery
necessary to do so - namely a step executor and a plan executor.
* Remove dead code
* CR: use atomic.Value to be explicit about what values are atomically loaded and stored
* CR: Initialize atomics to 'false'
* Add locks around data structures in event callbacks
* CR: Add DegreeOfParallelism method on Options and add comment on select in Execute
* CR: Use context.Context for cancellation instead of cancel.Source
* CR: improve cancellation
* Rebase against master: execute read steps in parallel
* Please gometalinter
* CR: Inline a few methods in stepExecutor
* CR: Feedback and bug fixes
1. Simplify step_executor.go by 'bubbling' up errors as far as possible
and reporting diagnostics and cancellation in one place
2. Fix a bug where the CLI claimed that a plan was cancelled even if it
wasn't (it just has an error)
* Comments
* CR: Add comment around problematic select, move workers.Add outside of goroutine, return instead of break
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
Fixes#1643.
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit resolves this issue.
This changes two things:
1) Eliminates the fact that we had two kinds of previews in our engine.
2) Always initialize the plugin.Events, to ensure that all plugin loads
are persisted no matter the update type (update, refresh, destroy),
and skip initializing it when dryRun == true, since we won't save them.
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...
* Lift snapshot management out of the engine
This PR is a prerequisite for parallelism by addressing a major problem
that the engine has to deal with when performing parallel resource
construction: parallel mutation of the global snapshot. This PR adds
a `SnapshotManager` type that is responsible for maintaining and
persisting the current resource snapshot. It serializes all reads and
writes to the global snapshot and persists the snapshot to persistent
storage upon every write.
As a side-effect of this, the core engine no longer needs to know about
snapshot management at all; all snapshot operations can be handled as
callbacks on deployment events. This will greatly simplify the
parallelization of the core engine.
Worth noting is that the core engine will still need to be able to read
the current snapshot, since it is interested in the dependency graphs
contained within. The full implications of that are out of scope of this
PR.
Remove dead code, Steps no longer need a reference to the plan iterator that created them
Fixing various issues that arise when bringing up pulumi-aws
Line length broke the build
Code review: remove dead field, fix yaml name error
Rebase against master, provide implementation of StackPersister for cloud backend
Code review feedback: comments on MutationStatus, style in snapshot.go
Code review feedback: move SnapshotManager to pkg/backend, change engine to use an interface SnapshotManager
Code review feedback: use a channel for synchronization
Add a comment and a new test
* Maintain two checkpoints, an immutable base and a mutable delta, and
periodically merge the two to produce snapshots
* Add a lot of tests - covers all of the non-error paths of BeginMutation and End
* Fix a test resource provider
* Add a few tests, fix a few issues
* Rebase against master, fixed merge
This change includes a bunch of refactorings I made in prep for
doing refresh (first, the command, see pulumi/pulumi#1081):
* The primary change is to change the way the engine's core update
functionality works with respect to deploy.Source. This is the
way we can plug in new sources of resource information during
planning (and, soon, diffing). The way I intend to model refresh
is by having a new kind of source, deploy.RefreshSource, which
will let us do virtually everything about an update/diff the same
way with refreshes, which avoid otherwise duplicative effort.
This includes changing the planOptions (nee deployOptions) to
take a new SourceFunc callback, which is responsible for creating
a source specific to the kind of plan being requested.
Preview, Update, and Destroy now are primarily differentiated by
the kind of deploy.Source that they return, rather than sprinkling
things like `if Destroying` throughout. This tidies up some logic
and, more importantly, gives us precisely the refresh hook we need.
* Originally, we used the deploy.NullSource for Destroy operations.
This simply returns nothing, which is how Destroy works. For some
reason, we were no longer doing this, and instead had some
`if Destroying` cases sprinkled throughout the deploy.EvalSource.
I think this is a vestige of some old way we did configuration, at
least judging by a comment, which is apparently no longer relevant.
* Move diff and diff-printing logic within the engine into its own
pkg/engine/diff.go file, to prepare for upcoming work.
* I keep noticing benign diffs anytime I regenerate protobufs. I
suspect this is because we're also on different versions. I changed
generate.sh to also dump the version into grpc_version.txt. At
least we can understand where the diffs are coming from, decide
whether to take them (i.e., a newer version), and ensure that as
a team we are monotonically increasing, and not going backwards.
* I also tidied up some tiny things I noticed while in there, like
comments, incorrect types, lint suppressions, and so on.
This change uses the prior checkpoint's deployment manifest to pre-
populate all plugins required to complete the destroy operation. This
allows for subsequent attempts to load a resource's plugin to match the
already-loaded version. This approach obviously doesn't work in a
hypothetical future world where plugins for the same resource provider
are loaded side-by-side, but we already know that.
Also, rename/cleanup a bunch of serialization code.
Also, generate better environment names in the serialized closure code. Thsi code should be much easier to make sense of as hte names will better track to the original names in the user code.
Also, dedupe simple non-capturing functions. This helps ensure we don't spit out N copies of __awaiter (one per file it is declared in).
* Improve error messages output by the CLI
This fixes a couple known issues with the way that we present errors
from the Pulumi CLI:
1. Any errors from RPC endpoints were bubbling up as they were to
the top-level, which was unfortunate because they contained
RPC-specific noise that we don't want to present to the user. This
commit unwraps errors from resource providers.
2. The "catastrophic error" message often got printed twice
3. Fatal errors are often printed twice, because our CLI top-level
prints out the fatal error that it receives before exiting. A lot of
the time this error has already been printed.
4. Errors were prefixed by PU####.
* Feedback: Omit the 'catastrophic' error message and use a less verbose error message as the final error
* Code review feedback: interpretRPCError -> resourceStateAndError
* Code review feedback: deleting some commented-out code, error capitalization
* Cleanup after rebase
When a stack has secrets, we now take the secret values and construct
a regular expression which is just an alternation of all the secret
values. Then, before pushing any string data into an Event, we run the
regular expression and replace all matches with '[secret]'.
Fixes#747
