Move to 1ES engineering pools
## PR Checklist
* [x] Closes#10734
* [x] I work here
* [x] If the builds still work, the tests pass. (release and PR builds...)
## Validation Steps Performed
- [x] Run the builds associated with this PR
- [x] Force run a release build off this branch
- [x] Force run a PGO training build off this branch
Shortly before adding the SSE2 variant I "improved" it by using
`_mm_packs_epi32`, but failed to test it again afterwards.
## PR Checklist
* [x] Closes#10866
* [x] I work here
## Validation Steps Performed
* `printf "\e[mNORMAL \e[1mBOLD\n"` results in correct bold white glyphs ✔️
## Validation Steps Performed
Clicked around, validated that settings still behave the same (as far as
I can tell with my limited terminal configuration expertise)
Closes#10387
Fixes dragging and dropping drive letters onto the '+' button.
Manually tested - dragging and dropping the `C:\` drive onto the '+' button works when creating a new tab, splitting or creating a new window. Dragging and dropping a regular directory still works.
Closes#10723
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Add the ability to toggle a pane's split direction
- Switch from horizontal to vertical split (and vice versa)
- Propogate new borders through to children.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
#10665
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10665
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [x] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Ran terminal, created multiple panes in different orientations, ran command through command palate and verified that they displayed properly in the new orientation.
When the `SetContoleTitle` API is called with a title containing control
characters, we need to filter out those characters before we can forward
the title change over conpty as an escape sequence. If we don't do that,
the receiving terminal will end up executing the control characters
instead of updating the title. We were already filtering out the C0
control characters, but with this PR we're now filtering out C1 controls
characters as well.
I've simply updated the sanitizing routine in `DoSrvSetConsoleTitleW` to
filter our characters in the range `0x80` to `0x9F`. This is in addition
to the C0 range (`0x00` to `0x1F`) that was already excluded.
## Validation Steps Performed
I've added a conpty unit test that calls `DoSrvSetConsoleTitleW` with
titles containing a variety of C0 and C1 controls characters, and which
verifies that those characters are stripped from the title forwarded to
conpty.
I've also confirmed that the test case in issue #10312 is now working
correctly in Windows Terminal.
Closes#10312
The `_invalidMap` size is dependent on both `clientSize` as well
as `glyphCellSize` and must be resized when either changes.
## PR Checklist
* [x] Closes#10855
* [x] I work here
## Validation Steps Performed
* Changing font size with Ctrl+Mousewheel in fullscreen works ✔️
This commit introduces a hack to ConptyConnection for launching WSL.
When we detect that WSL is being launched (either "wsl" or "wsl.exe",
unqialified or _specifically_ from the current OS's System32 directory),
we will promote the startingDirectory specified at launch time into a
commandline argument.
Why do we want to switch to `--cd`?
With the current design of ConptyConnection and WSL, there are some
significant limitations:
* `startingDirectory` cannot be a WSL path, which forces users to
use weird tricks such as setting the starting directory to
`\\wsl$\Distro\home\user`.
* WSL occasionally fails to launch in time to handle a `\\wsl$` path,
which makes us spawn in a strange location (or no location at all).
(This fix will only address the second one until a WSL update is
released that adds support for `--cd $LINUX_PATH`.)
We will not do the promotion if any of the following are true:
* the commandline contains `--cd` already
* the commandline contains a bare `~`
* This was a commonly-used workaround that forced wsl to start in the
user's home directory. It conflicts with --cd.
* wsl is not spelled properly (`WSL` and `WSL.EXE` are unacceptable)
* an absolute path to wsl outside the system32 directory is provided
We chose the do this trick in the connection layer, the latest possible
point, because it captures the most use cases.
We could have done it earlier, but the options were quite limiting.
They are:
* Generate WSL profiles with startingDirectory set to the home folder
* We can't do this because we do not know the user's home folder
path.
* Generate WSL profiles with `--cd` in them.
* This only works for unmodified profiles.
* This only works for generated profiles.
* Users cannot override the commandline without breaking it.
* Users cannot specify a startingDirectory (!) since the one on the
commandline wins.
* Set a flag on generated WSL profiles to request this trick
* This only works for generated profiles. Users who create their own
WSL profiles couldn't set startingDirectory and have it work the
same.
Patching the commandline, hacky though it may be, seemed to be the most
compatible option. Eventually, we can even support `wt -d ~ wsl`!
## Validation Steps Performed
Manual validation for the following cases:
```c++
// MUST MANGLE
auto a01 = _tryMangleStartingDirectoryForWSL(LR"(wsl)", L"SENTINEL");
auto a02 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X)", L"SENTINEL");
auto a03 = _tryMangleStartingDirectoryForWSL(LR"(wsl -d X ~/bin/sh)", L"SENTINEL");
auto a04 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe)", L"SENTINEL");
auto a05 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X)", L"SENTINEL");
auto a06 = _tryMangleStartingDirectoryForWSL(LR"(wsl.exe -d X ~/bin/sh)", L"SENTINEL");
auto a07 = _tryMangleStartingDirectoryForWSL(LR"("wsl")", L"SENTINEL");
auto a08 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe")", L"SENTINEL");
auto a09 = _tryMangleStartingDirectoryForWSL(LR"("wsl" -d X)", L"SENTINEL");
auto a10 = _tryMangleStartingDirectoryForWSL(LR"("wsl.exe" -d X)", L"SENTINEL");
auto a11 = _tryMangleStartingDirectoryForWSL(LR"("C:\Windows\system32\wsl.exe" -d X)", L"SENTINEL");
auto a12 = _tryMangleStartingDirectoryForWSL(LR"("C:\windows\system32\wsl" -d X)", L"SENTINEL");
auto a13 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~/bin)", L"SENTINEL");
// MUST NOT MANGLE
auto a14 = _tryMangleStartingDirectoryForWSL(LR"("C:\wsl.exe" -d X)", L"SENTINEL");
auto a15 = _tryMangleStartingDirectoryForWSL(LR"(C:\wsl.exe)", L"SENTINEL");
auto a16 = _tryMangleStartingDirectoryForWSL(LR"(wsl --cd C:\)", L"SENTINEL");
auto a17 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~)", L"SENTINEL");
auto a18 = _tryMangleStartingDirectoryForWSL(LR"(wsl ~ -d Ubuntu)", L"SENTINEL");
```
We don't have anywhere to put TerminalConnection unit tests :|
Closes#592.
When switching to the alt buffer, the starting cursor position, style,
and visibility is meant to be inherited from the main buffer. Similarly,
when returning to the main buffer, any changes made to those attributes
should be copied back (with the exception of the cursor position, which
is restored to its original state). This PR makes sure we handle that
cursor state correctly.
At some point I'd like to move the cursor state out of the
`SCREEN_INFORMATION` class, which would make this inheritance problem a
non-issue. For now, though, I've just made it copy the state from the
main buffer when creating the alt buffer, and copy it back when
returning to the main buffer.
## Validation Steps Performed
I've added some unit tests to verify the cursor state is inherited
correctly when switching to the alt buffer and back again. I also had to
make a small change to one of the existing alt buffer test that relied
on the initial cursor position being at 0;0, which is no longer the
case.
I've verified that the test case in issue #3545 is now working
correctly. I've also confirmed that this fixes a problem in the
_notcurses_ demo, where the cursor was showing when it should have been
hidden.
Closes#3545
## Summary of the Pull Request
<kbd>win+shift+arrows</kbd> can be used to move windows to adjacent monitors. When that happens, we'll new re-calculate the size of the window for the new monitor.
## References
* megathread: #8888
## PR Checklist
* [x] Closes#10274
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
In `WM_WINDOWPOSCHANGING`, the OS says "hey, I'm about to do {something} to your window. You cool with that?". We handle that message by:
1. checking if the window was _moved_ as a part of this message
2. getting the monitor that the window will be moved onto
3. If that monitor is different than the monitor the window is currently on, then
* calculate how big the quake window should be on that monitor
* tell the OS that's where we'd like to be.
## Validation Steps Performed
* <kbd>win+shift+arrows</kbd> works right now
* normal quake summoning still works right
I was watching a video about vectorized instructions and I wanted to
try out some new things, as I had never written AVX code before.
This commit is the result of this tiny Thursday morning detour into
AVX land. It improves performance of `TextColor::GetColor` by about 3x.
## Validation Steps Performed
* Default colors are still properly shifted +8 ✔️
Sets the tooltip text on the '+' button based on the keyboard modifiers
when dragging and dropping.
## Validation Steps Performed
Manually tested - dragged a directory onto the '+ button and saw that
* The text changed when `shift` was pressed
* The text changed when `alt` was pressed
* The text changed back when `shift` or `alt` were released
Closes#10722
## Summary of the Pull Request
This fixes two bugs related to dragging into the bounds of the `TermControl`. Although the fixes are fairly small, I'm batching them up, because I don't want to stack 2 more PRs on top of #10051.
* #9109
- This is fixed by only starting an autoscroll if the click&drag actually started within the bounds of the control.
* #4603
- Building on the above change, only modify the selection when the drag started in the control.
## References
* srsly go read #10051.
## PR Checklist
* [x] Closes#9109
* [x] Closes#4603
* [x] I work here
* [x] Test added
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is kind of annoying that the auto-scrolling is handled by the TermControl, but it uses a timer that's still a WinUI construct.
We only want to start the auto-scrolling behavior when the drag started _inside_ the control. Otherwise, in the tab drag scenario, dragging into the bounds of the TermControl will trick it into thinking it should start a scroll.
## Summary of the Pull Request
When we're restoring from fullscreen, we do a little adjustment to make sure to clamp the window bounds within the bounds of the active monitor. We unfortunately didn't account for the size of the non-client area (the invisible borders around our 1px border). This didn't matter most of the time, but if the window was within ~8px of the side of the monitor (any side), then restoring from fullscreen would actually move it to the wrong place.
As it turns out, the `_quake` window is within ~8px of the edges of the monitor _very often_.
## References
* regressed in #9737
## PR Checklist
* [x] Closes#10199
* [x] I work here
* [ ] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
The repro in the bug was fairly straightforward. It doesn't happen anymore.
For inexplicable reasons, the top row of pixels on our tabs, new tab
button, and caption buttons is totally unclickable. The mouse simply
refuses to interact with them. So when we're maximized, on certain
monitor configurations, this results in the top row of pixels not
reacting to clicks at all.
To obey Fitt's Law, we're gonna hackily shift the entire island up one
pixel. That will result in the top row of pixels in the window actually
being the _second_ row of pixels for those buttons, which will make them
clickable. It's perhaps not the right fix, but it works.
After discussion, we think this is a fine fix for this. We don't think
anyone's going to miss the top row of pixels on the TabView. The original
bug is painful enough for the subset of users it impacts that this is an
acceptable trade. Should a better fix be found, we can absolutely do that
instead.
Closes#7422
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Implementation of #6219 with a small tweak, not just passing the keys when no panes are present, but passing on the keys when there is no other pane to move to. This enables another usecase: 2 panes in terminal split vertically; in one of these panes running tmux with two panes that are split horizontally. This allows the user to still navigate between tmux panes even though they have terminal panes open.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
Not that I know of
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#6219
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated. I don't think that's necessary
* [x] Schema updated. N/A
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan.
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
Implementation by propagating the boolean indicating success of moving focus all the way to the action handler, where this result will determine whether the action will be considered handled or not. When the action is not handled, the keychord will be propagated to the terminal.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
Manual testing; all relevant unit tests still work
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
Fixes/implements #10058 according to directions in that issue: added support for browser navigation keys to be used in actions.
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#10058
* [x] CLA signed.
* [x] Tests added/passed
* [x] Documentation updated: . If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: https://github.com/MicrosoftDocs/terminal/pull/371
* [x] Schema updated.
* [x] I've discussed this with core contributors already. According to instructions in #10058
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
The mouse back/forward keys do not correspond to the keys added here. That would be a nice (but more complicated) addition, I'll add an issue for it.
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
The `+=` operator is an extremely hot path under heavily output load. This PR aims to optimize its speed.
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [ ] Supports #10563
* [ ] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
This pull request ports our old release pipeline from Azure DevOps' editor to real YAML.
It includes the following changes on top of a straight-up "export" from Azure:
- Converts all queue-time variables into form-based parameters
- Adds a "matrix" build strategy for Configs * Platforms
- Renames all jobs to have reasonable names
- The YAML generator has a bug where it inlines scripts *and* file paths if a task had both; remove old inlines
- Removes dead rules
- Fixes the WPF build to include the apiset impostor
- Migrates the access token into the environment for the one build stage that needs it
- Cleans up some of the online script logic
- Removes all of the "!is pull request?" checks
- For tabs started from the Terminal, the initial sizing information is
passed into the connection and used to establish the PTY. Those
parameters are given over to the `OpenConsole.exe` acting as PTY to
establish the initial buffer/window size.
- However, for tabs started from outside, the PTY is created with some
default buffer information FIRST as the Terminal hasn't even been
involved yet. As such, when the Terminal gets that connection, it must
tell the PTY to resize just as it connects to match the window size
it's about to use.
- Ongoing resize operations in the Terminal did and still work fine
because they transmitted the updated size with the
`ResizePseudoConsole` API.
## Validation Steps Performed
- [x] Confirmed existing tabs opening have correct initial size in PTY
(like with CMD `mode con` command)
- [x] Confirmed inbound cmd tabs have correct initial size in PTY via
`mode con` command per bug repro
Closes#9811
Turns out, DWrite will automatically turn some features on even if they weren't included in the feature vector passed into it. Remove these features from our default list for easier readability.
This commit fixes the UseDx mode for conhost.
In order to add support for UseDx without calling `SetWindowSize`,
responsibility for resizing `_invalidMap` has been moved to occur
only when the renderer itself recognizes a new size. Furthermore
`InvalidateAll` is now the central point to invalidate `_invalidMap`.
## Validation Steps Performed
* Enabling `UseDx` enables the DxEngine for conhost ✔️
* Resizing windows in conhost works ✔️
* Resizing windows in WT works ✔️Closes#5455
## Summary of the Pull Request
Uses the new logic to find visual neighbors of a pane to find which pane is the target when the move-focus commands are used.
## References
It sounds like this logic will be refined later to meet #4692
## PR Checklist
* [x] Closes#2398
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Documentation updated. If checked, please file a pull request on [our docs repo](https://github.com/MicrosoftDocs/terminal) and link it here: #xxx
* [ ] Schema updated.
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
## Validation Steps Performed
Created a grid of panes and confirmed that focus movement went to the right quadrant instead of just the first child of the sibling.
Adds support for users to be able to set font features and axes (see the spec for more details!)
## Detailed Description
**CustomTextLayout**
- Asks the `DxFontRenderData` for the font features when getting glyphs
- _If any features have been set/updated, we always skip the "isTextSimple" shortcut_
- Asks the `_formatInUse` for any font axes when mapping characters in `_AnalyzeFontFallback`
**DxFontRenderData**
- Stores a map of font features (initialized to the [standard feature list])
- Stores a map of font axes
- Has methods to add font features/axes to the map or update existing ones
- Has methods to retrieve the font features/axes
- Sets the font axes in the `IDWriteTextFormat` when creating it
## Validation Steps Performed
It works!
[standard feature list]: ac5aef67d1/DrawableObject.ixx (L802)
Specified in #10457
Related to #1790Closes#759Closes#5828
