## Summary of the Pull Request
Implements `copyFormatting` as a global setting. When enabled, formatting such as font and foreground/background colors are copied to the clipboard on _all_ copy operations.
Also updates the schema and docs.
## References
#5212 - Spec for Formatted Copying
#4191 - Setting to enable/disable formatted copy
#5263 - PR prematurely merged without approval of #5212
This feature will also have an impact on these yet-to-be-implemented features:
- #5262 - copyFormatting Keybinding Arg for Copy
- #1553 - Pointer Bindings
- #4191 - add array support for `copyFormatting`
## Detailed Description of the Pull Request
We already check if the hstring passed into the clipboard is empty before setting it. So the majority of the changes are actually just adding the global setting in.
## Validation Steps Performed
| `copyFormatting` | Mouse Copy | Keyboard Copy |
|--|--|--|
| not set (`false`) | ✔ | ✔ |
| `true` | ✔ | ✔ |
| `false` | ✔ | ✔ |
## Summary of the Pull Request
Implements `copyFormatting` as a global setting. When enabled, formatting such as font and foreground/background colors are copied to the clipboard on _all_ copy operations.
Also updates the schema and docs.
## References
#5212 - Spec for Formatted Copying
#4191 - Setting to enable/disable formatted copy
This feature will also have an impact on these yet-to-be-implemented features:
- #5262 - copyFormatting Keybinding Arg for Copy
- #1553 - Pointer Bindings
## PR Checklist
* [X] Closes#4191
## Detailed Description of the Pull Request / Additional comments
We already check if the hstring passed into the clipboard is empty before setting it. So the majority of the changes are actually just adding the global setting in.
## Validation Steps Performed
| `copyFormatting` | Mouse Copy | Keyboard Copy |
|--|--|--|
| not set (`false`) | ✔ | ✔ |
| `true` | ✔ | ✔ |
| `false` | ✔ | ✔ |
## Summary of the Pull Request
Renames the `requestedTheme` global setting to `theme`. Propagates updates to...
- schema
- doc
- defaults.json
- universal-defaults.json
## PR Checklist
* [X] Closes#5264
## Validation Steps Performed
| `theme` | Success? |
|--|--|
| `system` | ✔ |
| `light` | ✔ |
| `dark` | ✔ |
But we really know that `dark` is the one we care about here 😉
This commit adds a debugging feature that can be activated by holding
down Left Alt _and_ Right Alt when a new tab is being created, if you
have the global setting "debugFeatures" set to true. That global setting
will default to true in DEBUG builds.
That debugging feature takes the form of a split pane that shows the raw
VT sequences being written to and received from the connection.
When those buttons are held down, every connection that's created as
part of a new tab is wrapped and split into _two_ connections: one to
capture input (and stand in for the main connection) and one to capture
output (and be displayed off to the side)
Closes#3206
## Summary of the Pull Request
Currently, if the Terminal attempts to parse a setting that _should_ be a `bool`
and the user provided a string, then we'll throw an exception while parsing the
settings, and display an error message that's pretty unrelated to the actual
problem.
The same goes for `bool`s as `int`s, `float`s as `int`s, etc.
This PR instead updates our settings parsing to ensure that we check the type of
a json value before actually trying to get its parsed value.
## References
## PR Checklist
* [x] Closes#4299
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
I made a bunch of `JsonUtils` helpers for this in the same vein as the
`GetOptionalValue` ones.
Notably, any other value type can safely be treated as a string value.
## Validation Steps Performed
* added tests
* ran the Terminal and verified we can parse settings with the wrong types
## Summary of the Pull Request
Adds warning messages for a pair of keybindings-related scenarios. This covers the following two bugs:
* #4239 - If the user has supplied more than one key chord in their `"keys"` array.
* #3522 - If a keybinding has a _required_ argument, then we'll display a message to the user
- currently, the only required parameter is the `direction` parameter for both `resizePane` and `moveFocus`
## References
When we get to #1334, we'll want to remove the `TooManyKeysForChord` warning.
## PR Checklist
* [x] Closes#4239
* [x] Closes#3522
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Validation Steps Performed
Tested manually, added tests.
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
<!-- Enter a brief description/summary of your PR here. What does it fix/what does it change/how was it tested (even manually, if necessary)? -->
## Summary of the Pull Request
So this PR adds a profile setting called "confirmCloseAllTabs", that allows one to enable or disable the "Do you want close all tabs?" dialog that appears when you close a window with multiple open tabs. It current defaults to "true". Also adds a checkbox to that dialog that also sets "confirmCloseAllTabs"
<!-- Other than the issue solved, is this relevant to any other issues/existing PRs? -->
## References
<!-- Please review the items on the PR checklist before submitting-->
## PR Checklist
* [x] Closes#3883
* [x] CLA signed. If not, go over [here](https://cla.opensource.microsoft.com/microsoft/Terminal) and sign the CLA
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
* [ ] I've discussed this with core contributors already. If not checked, I'm ready to accept this work might be rejected in favor of a different grand plan. Issue number where discussion took place: #xxx
<!-- Provide a more detailed description of the PR, other things fixed or any additional comments/features here -->
## Detailed Description of the Pull Request / Additional comments
I added a checkbox to the close dialog to set this setting, but I'm not sure how to best go about actually changing the setting from code; am open to suggestions, as to how it should be done, or if I should also just remove it and stick with the profile setting.
<!-- Describe how you validated the behavior. Add automated tests wherever possible, but list manual validation steps taken as well -->
## Validation Steps Performed
1. Set "confirmCloseAllTabs" to false in my profile.json file.
2. Opened a 2nd tab.
3. Closed the window
4. Observed that there was no confirmation before the window closed.
5. Set "confirmCloseAllTabs" to true
6. Repeat steps 2 and 3
7. Observe that there was a confirmation before the window closed.
## Summary of the Pull Request
Adds a setting `snapToGridOnResize` to disable snapping the window on resize, and defaults it to `false`.
## References
Introduced by pr #3181
## PR Checklist
* [x] Closes#3995
* [x] I work here
* [ ] Tests added/passed
* [ ] Requires documentation to be updated
The terminal will use the system setting to determine the number of lines to scroll at a time.
This can be overridden by adding rowsToScroll to app global settings file.
terminal will use the system setting if the app setting is 0, or not specified. No restart is needed to reflect setting changes in system or the settings file.
The default was hardcoded to 4 in the code with a todo comment. 1 works better on precision touchpads, where 4 scrolls too fast.
Co-authored-by: Hannes Nel <hannesne@microsoft.com>
This commit cleans up and deduplicates all of the common build
preamble/postamble across exe, dll, lib and c++/winrt projects.
The following specific changes have been made:
* All projects now define their ConfigurationType
* All projects now set all their properties *before* including a common
build file (or any other build files)
* cppwinrt.pre and cppwinrt.post now delegate most of their
configuration to common.pre and common.post
* (becuase of the above,) all build options are conserved between
console and c++/winrt components, including specific warnings and
preprocessor definitions.
* More properties that are configurable per-project are now
conditioned so the common props don't override them.
* The exe, dll, exe.or.dll, and lib postincludes have been merged into
pre or post and switched based on condition as required
* Shared items (-shared, -common) are now explicitly vcxitems instead of
vcxproj files.
* The link line is now manipulated after Microsoft.Cpp sets it, so the
libraries we specify "win". All console things link first against
onecore_apiset.lib.
* Fix all compilation errors caused by build unification
* Move CascadiaPackage's resources into a separate item file
Fixes#922.
This PR includes the code changes that enable users to set an initial position
(top left corner) and launch maximized. There are some corner cases:
1. Multiple monitors. The user should be able to set the initial position to
any monitors attached. For the monitors on the left side of the major monitor,
the initial position values are negative.
2. If the initial position is larger than the screen resolution and the window
is off-screen, the current solution is to check if the top left corner of the
window intersect with any monitors. If it is not, we set the initial position
to the top left corner of the nearest monitor.
3. If the user wants to launch maximized and provides an initial position, we
launch the maximized window on the monitor where the position is located.
# Testing
To test:
1. Check-out this branch and build on VS2019
2. Launch Terminal, and open Settings. Then close the terminal.
3. Add the following setting into Json settings file as part of "globals", just
after "initialRows":
"initialPosition": "1000, 1000",
"launchMode": "default"
My test data:
I have already tested with the following variables:
1. showTabsInTitlebar true or false
2. The initial position of the top left corner of the window
3. Whether to launch maximized
4. The DPI of the monitor
Test data combination:
Non-client island window (showTabsInTitlebar true)
1. Three monitors with the same DPI (100%), left, middle and right, with the
middle one as the primary, resolution: 1980 * 1200, 1920 * 1200, 1920 * 1080
launchMode: default
In-Screen test: (0, 0), (1000, 500), (2000, 300), (-1000, 400),
(-100, 200), (-2000, 100), (0, 1119)
out-of-screen:
(200, -200): initialize to (0, 0)
(200, 1500): initialize to (0, 0)
(2000, -200): initialize to (1920, 0)
(2500, 2000): initialize to (1920, 0)
(4000 100): initialize to (1920, 0)
(-1000, -100): initialize to (-1920, 0)
(-3000, 100): initialize to (-1920, 0)
(10000, -10000): initialize to (1920, 0)
(-10000, 10000): initialize to (-1920, 0)
(0, -10000): initialize to (0, 0)
(0, -1): initialize to (0, 0)
(0, 1200): initialize to (0, 0)
launch mode: maximize
(100, 100)
(-1000, 100): On the left monitor
(0, -2000): On the primary monitor
(10000, 10000): On the primary monitor
2. Left monitor 200% DPI, primary monitor 100% DPI
In screen: (-1900, 100), (-3000, 100), (-1000, 100)
our-of-screen: (-8000, 100): initialize at (-1920, 0)
launch Maximized: (-100, 100): launch maximized on the left monitor
correctly
3. Left monitor 100% DPI, primary monitor 200% DPI
In-screen: (-1900, 100), (300, 100), (-800, 100), (-200, 100)
out-of-screen: (-3000, 100): initialize at (-1920, 0)
launch maximized: (100, 100), (-1000, 100)
For client island window, the test data is the same as above.
Issues:
1. If we set the initial position on the monitor with a different DPI as the
primary monitor, and the window "lays" across two monitors, then the window
still renders as it is on the primary monitor. The size of the window is
correct.
Closes#1043
Add a warning when the user sets their colorScheme to a scheme that doesn't exist. When that occurs, we'll set their color table to the campbell scheme, to prevent it from being just entirely black.
This commit also switches scheme storage to a map keyed on name.
Closes#2547
This PR represents the start of the work on Cascading User + default settings, #754.
Cascading settings will be done in two parts:
* [ ] Layered Default+User settings (this PR)
* [ ] Dynamic Profile Generation (#2603).
Until _both_ are done, _neither are going in. The dynamic profiles PR will target this PR when it's ready, but will go in as a separate commit into master.
This PR covers adding one primary feature: the settings are now in two separate files:
* a static `defaults.json` that ships with the package (the "default settings")
* a `profiles.json` with the user's customizations (the "user settings)
User settings are _layered_ upon the settings in the defaults settings.
## References
Other things that might be related here:
* #1378 - This seems like it's definitely fixed. The default keybindings are _much_ cleaner, and without the save-on-load behavior, the user's keybindings will be left in a good state
* #1398 - This might have honestly been solved by #2475
## PR Checklist
* [x] Closes#754
* [x] Closes#1378
* [x] Closes#2566
* [x] I work here
* [x] Tests added/passed
* [x] Requires documentation to be updated - it **ABSOLUTELY DOES**
## Detailed Description of the Pull Request / Additional comments
1. We start by taking all of the `FromJson` functions in Profile, ColorScheme, Globals, etc, and converting them to `LayerJson` methods. These are effectively the same, with the change that instead of building a new object, they are simply layering the values on top of `this` object.
2. Next, we add tests for layering properties like that.
3. Now, we add a `defaults.json` to the package. This is the file the users can refer to as our default settings.
4. We then take that `defaults.json` and stamp it into an auto generated `.h` file, so we can use it's data without having to worry about reading it from disk.
5. We then change the `LoadAll` function in `CascadiaSettings`. Now, the function does two loads - one from the defaults, and then a second load from the `profiles.json` file, layering the settings from each source upon the previous values.
6. If the `profiles.json` file doesn't exist, we'll create it from a hardcoded `userDefaults.json`, which is stamped in similar to how `defaults.json` is.
7. We also add support for _unbinding_ keybindings that might exist in the `defaults.json`, but the user doesn't want to be bound to anything.
8. We add support for _hiding_ a profile, which is useful if a user doesn't want one of the default profiles to appear in the list of profiles.
## TODO:
* [x] Still need to make Alt+Click work on the settings button
* [x] Need to write some user documentation on how the new settings model works
* [x] Fix the pair of tests I broke (re: Duplicate profiles)
<hr>
* Create profiles by layering them
* Update test to layer multiple times on the same profile
* Add support for layering an array of profiles, but break a couple tests
* Add a defaults.json to the package
* Layer colorschemes
* Moves tests into individual classes
* adds support for layering a colorscheme on top of another
* Layer an array of color schemes
* oh no, this was missed with #2481
must have committed without staging this change, uh oh. Not like those tests actually work so nbd
* Layer keybindings
* Read settings from defaults.json + profiles.json, layer appropriately
This is like 80% of #754. Needs tests.
* Add tests for keybindings
* add support to unbind a key with `null` or `"unbound"` or `"garbage"`
* Layer or clear optional properties
* Add a helper to get an optional variable for a bunch of different types
In the end, I think we need to ask _was this worth it_
* Do this with the stretch mode too
* Add back in the GUID check for profiles
* Add some tests for global settings layering
* M A D W I T H P O W E R
Add a MsBuild target to auto-generate a header with the defaults.json as a
string in the file. That way, we can _always_ load the defaults. Literally impossible to not.
* When the user's profile.json doesn't exist, create it from a template
* Re-order profiles to match the order set in the user's profiles.json
* Add tests for re-ordering profiles to match user ordering
* Add support for hiding profiles using `"hidden": true`
* Use the hardcoded defaults.json for the exception->"use defaults" case
* Somehow I messed up the git submodules?
* woo documentation
* Fix a Terminal.App.Unit.Tests failure
* signed/unsigned is hard
* Use Alt+Settings button to open the default settings
* Missed a signed/unsigned
* Some very preliminary PR feedback
* More PR feedback
Use the wil helper for the exe path
Move jsonutils into their own file
kill some dead code
* Add templates to these bois
* remove some code for generating defaults, reorder defaults.json a tad
* Make guid a std::optional
* Large block of PR feedback
* Remove some dead code
* add some comments
* tag some todos
* stl is love, stl is life
* add `-noprofile`
* Fix the crash that dustin found
* -Encoding ASCII
* Set a profile's default scheme to Campbell
* Fix the tests I regressed
* Update UsingJsonSetting.md to reflect that changes from these PRs
* Change how GenerateGuidForProfile works
* Make AppKeyBindings do its own serialization
* Remove leftover dead code from the previous commit
* Fix up an enormous number of PR nits
* Fix a typo; Update the defaults to match #2378
* Tiny nits
* Some typos, PR nits
* Fix this broken defaults case
Switch to using jsoncpp as our json library. This lets us pretty-print the json file by default, and lets users place comments in the json file.
We will now only re-write the file when the actual logical structure of the json object changes, not only when the serialization changes.
Unfortunately, this will remove any existing ordering of profiles, and make the order random. We don't terribly care though, because when #754 lands, this will be less painful.
It also introduces a top-level globals object to hold all the global properties, including keybindings. Existing profiles should gracefully upgrade.
