They don't make any sense on the intermediate builder image. The final
images needs them to be of use for anyone.
Signed-off-by: Johannes Wienke <languitar@semipol.de>
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
Make pip install faster in Docker build for [Complement](https://github.com/matrix-org/complement) testing.
If files have changed in a `COPY` command, Docker will invalidate all of the layers below. So I changed the order of operations to install all dependencies before we `COPY synapse /synapse/synapse/`. This allows Docker to use our cached layer of dependencies even when we change the source of Synapse and speed up builds dramatically! `53.5s` -> `3.7s` builds 🤘
As an alternative, I did try using BuildKit caches but this still took 30 seconds overall on that step. 15 seconds to gather the dependencies from the cache and another 15 seconds to `Installing collected packages`.
Fix https://github.com/matrix-org/synapse/issues/9364
Adds note about updating dh-virtualenv once we drop support for Xenial.
We can't update now, because it needs debhelper 12, while Xenial only
backports 10.
Signed-off-by: Dan Callahan <danc@element.io>
Debian package builds were failing for two reasons:
1. Python versions prior to 3.7 throw exceptions when attempting to print
Unicode characters under a "C" locale. (#9076)
2. We depended on `dh-systemd` which no longer exists in Debian Bullseye, but
is necessary in Ubuntu Xenial. (#9073)
Setting `LANG="C.UTF-8"` in the build environment fixes the first issue.
See also: https://bugs.python.org/issue19846
The second issue is a bit trickier. The dh-systemd package was merged into
debhelper version 9.20160709 and a transitional package left in its wake.
The transitional dh-systemd package was removed in Debian Bullseye.
However, Ubuntu Xenial ships an older debhelper, and still needs dh-systemd.
Thus, builds were failing on Bullseye since we depended on a package which had
ceased existing, but we couldn't remove it from the debian/control file and our
build scripts because we still needed it for Ubuntu Xenial.
We can fix the debian/control issue by listing dh-systemd as an alternative to
the newer versions of debhelper. Since dh-systemd declares that it depends on
debhelper, Ubuntu Xenial will select its older dh-systemd which will in turn
pull in its older debhelper, resulting in no change from the status quo. All
other supported releases will satisfy the debhelper dependency constraint and
skip the dh-systemd alternative.
Build scripts were fixed by unconditionally attempting to install dh-systemd on
all releases and suppressing failures.
Once we drop support for Ubuntu Xenial, we can revert most of this commit and
rely on the version constraint on debhelper in debian/control.
Fixes#9076Fixes#9073
Signed-off-by: Dan Callahan <danc@element.io>
This removes the version pin of the `prometheus_client` dependency, in direct response to #8831. If merged, this will close#8831
As far as I can tell, no other changes are needed, but as I'm no synapse expert, I'm relying heavily on CI and maintainer reviews for this. My very primitive test of synapse with prometheus_client v0.9.0 on my home server didn't bring up any issues, so we'll see what happens.
Signed-off-by: Jordan Bancino
We do this to prevent foot guns. The default config uses a MemoryFilter,
but users are free to change to logging to files directly. If they do
then they have to ensure to set the `filters: [context]` on the right
handler, otherwise records get written with the wrong context.
Instead we move the logic to happen when we generate a record, which is
when we *log* rather than *handle*.
(It's possible to add filters to loggers in the config, however they
don't apply to descendant loggers and so they have to be manually set on
*every* logger used in the code base)
As mentioned in #7397, switching to a debian base should help with multi-arch work to save time on compiling. This is unashamedly based on #6373, but without the extra functionality. Switch python version back to generic 3.7 to always pull the latest. Essentially, keeping this as small as possible. The image is bigger though unfortunately.
Turns out that loggers that are instantiated before the config is loaded get
turned off.
Also bring the logging config that is generated by --generate-config into line.
Fixes#6194.
* Allow passing SYNAPSE_WORKER envvar
* changelog.d
* Document SYNAPSE_WORKER.
Attempting to imply that you don't need to change this default
unless you're in worker mode.
Also aware that there's a bigger problem of attempting to document
a complete working configuration of workers using docker, as we
currently only document to use `synctl` for worker mode, and synctl
doesn't work that way in docker.
* Fix debian packages for sid being called buster.
I don't know why the sid images return buster as its codename in
`lsb_release` but it does, so lets just grab the codename from the
distro we pass into dockerfile
* Newsfile
This is basically a contrived way of adding a `Recommends` on `libpq5`, to fix#5653.
The way this is supposed to happen in debhelper is to run
`dh_shlibdeps`, which in turn runs `dpkg-shlibdeps`, which spits things out
into `debian/<package>.substvars` whence they can later be included by
`control`.
Previously, we had disabled `dh_shlibdeps`, mostly because `dpkg-shlibdeps`
gets confused about PIL's interdependent objects, but that's not really the
right thing to do and there is another way to work around that.
Since we don't always use postgres, we don't necessarily want a hard Depends on
libpq5, so I've actually ended up adding an explicit invocation of
`dpkg-shlibdeps` for `psycopg2`.
I've also updated the build-depends list for the package, which was missing a
couple of entries.
Alpine Linux 3.8 is still supported, but it seems like
it's quite outdated now.
While Python should be the same on both, all other libraries, etc.,
are much newer in Alpine 3.9 and 3.10.
Signed-off-by: Slavi Pantaleev <slavi@devture.com>
This is mostly a documentation change, but also adds a default value for
SYNAPSE_CONFIG_PATH, so that running from the generated config is the default,
and will Just Work provided your config is in the right place.
When running under docker, we want to use docker's own logging stuff rather
than losing the logs somewhere on the container's filesystem, so let's use log
configs that spit logs out to stdout instead.
We don't want to generate any missing configs when running from a precanned
config.
(There's a strong argument that we don't want to do this at all, since
generating a new signing key on each invocation sounds disasterous, but I don't
fancy unpicking that for now.)
psycopg 2.8 is now out, which means that the C library gets built from source,
so we now need libpq-dev when building.
Turns out the need for this package is already documented in
docs/postgres.rst.
Using systemd-python allows for logging to the systemd journal,
as is documented in: `synapse/contrib/systemd/log_config.yaml`.
Signed-off-by: Silke Hofstra <silke@slxh.eu>
There are two reasons this is a good thing:
* first, it means that you don't end up with stuff kicking around your working
copy ending up in the build image by mistake (which can upset the pip
install process)
* second: it means that the docker image cache is more effective, and we can
reuse docker images when iterating on the docker stuff.
since #4298, the optional dependencies are no longer installed with a simple
`pip install .`, which meant that they were not being included in the debian
package.
The easy fix to that is dh_virtualenv --extras, but that needs dh_virtualenv
1.1...
move the example email templates into the synapse package so that they can be
used as package data, which should mean that all of the packaging mechanisms
(pip, docker, debian, arch, etc) should now come with the example templates.
In order to grandfather in people who relied on the templates being in the old
place, check for that situation and fall back to using the defaults if the
templates directory does not exist.
