* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Pull out GetUserDirectoryTables helper
* Don't rebuild the dir in tests that don't need it
In #10796 I changed registering a user to add directory entries under.
This means we don't have to force a directory regbuild in to tests of
the user directory search.
* Move test_initial to tests/storage
* Add type hints to both test_user_directory files
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Factor more stuff out of `_get_events_and_persist`
It turns out that the event-sorting algorithm in `_get_events_and_persist` is
also useful in other circumstances. Here we move the current
`_auth_and_persist_fetched_events` to `_auth_and_persist_fetched_events_inner`,
and then factor the sorting part out to `_auth_and_persist_fetched_events`.
* `_get_remote_auth_chain_for_event`: remove redundant `outlier` assignment
`get_event_auth` returns events with the outlier flag already set, so this is
redundant (though we need to update a test where `get_event_auth` is mocked).
* `_get_remote_auth_chain_for_event`: move existing-event tests earlier
Move a couple of tests outside the loop. This is a bit inefficient for now, but
a future commit will make it better. It should be functionally identical.
* `_get_remote_auth_chain_for_event`: use `_auth_and_persist_fetched_events`
We can use the same codepath for persisting the events fetched as part of an
auth chain as for those fetched individually by `_get_events_and_persist` for
building the state at a backwards extremity.
* `_get_remote_auth_chain_for_event`: use a dict for efficiency
`_auth_and_persist_fetched_events` sorts the events itself, so we no longer
need to care about maintaining the ordering from `get_event_auth` (and no
longer need to sort by depth in `get_event_auth`).
That means that we can use a map, making it easier to filter out events we
already have, etc.
* changelog
* `_auth_and_persist_fetched_events`: improve docstring
* Improve typing in user_directory files
This makes the user_directory.py in storage pass most of mypy's
checks (including `no-untyped-defs`). Unfortunately that file is in the
tangled web of Store class inheritance so doesn't pass mypy at the moment.
The handlers directory has already been mypyed.
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Dirk Klimpel <5740567+dklimpel@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
It's a simplification, but one that'll help make the user directory logic easier
to follow with the other changes upcoming. It's not strictly required for those
changes, but this will help simplify the resulting logic that listens for
`m.room.member` events and generally make the logic easier to follow.
This means the config option `search_all_users` ends up controlling the
search query only, and not the data we store. The cost of doing so is an
extra row in the `user_directory` and `user_directory_search` tables for
each local user which
- belongs to no public rooms
- belongs to no private rooms of size ≥ 2
I think the cost of this will be marginal (since they'll already have entries
in `users` and `profiles` anyway).
As a small upside, a homeserver whose directory was built with this
change can toggle `search_all_users` without having to rebuild their
directory.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This updates the ordering of the returned events from the spaces
summary API to that defined in MSC2946 (which updates MSC1772).
Previously a step was skipped causing ordering to be inconsistent with
clients.
Turns out that the functionality added in #10546 to skip TLS was incompatible
with older Twisted versions, so we need to be a bit more inventive.
Also, add a test to (hopefully) not break this in future. Sadly, testing TLS is
really hard.
As opposed to only allowing the summary of spaces which the user is
already in or has world-readable visibility.
This makes the logic consistent with whether a space/room is returned
as part of a space and whether a space summary can start at a space.
If a room which the requesting user was invited to was queried over
federation it will now properly appear in the spaces summary (instead
of being stripped out by the requesting server).
If there are no services providing a protocol, omit it completely
instead of returning an empty dictionary.
This fixes a long-standing spec compliance bug.
Reproducible on a federated homeserver when there is a membership auth event as a floating outlier. Then when we try to backfill one of that persons messages, it has missing membership auth to fetch which caused us to mistakenly replace the `context` for the message with that of the floating membership `outlier` event. Since `outliers` have no `state` or `state_group`, the error bubbles up when we continue down the persisting route: `sqlite3.IntegrityError: NOT NULL constraint failed: event_to_state_groups.state_group`
Call stack:
```
backfill
_auth_and_persist_event
_check_event_auth
_update_auth_events_and_context_for_auth
```
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAmEBUJUQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCWi6CACfA3B7rXfQIO893mctSZkNhtAG/e4o310M
etvjAtovKmKeFqBvm89FPmFoXvGA2ypoz7Jz2fdkP56DNKIXvihnDc8EeQ3gGawf
hQ8GBjICOL1e7R/4qzuOCWYdppBGoGNAbz7qyxAUxZ/XOzsPJ2VBGkgyXWZkyPe/
nJYsuMuMp117HUwTqPqs3oZuTN0MRTy6xgaDfbFbcX9UC/amLmGIWOhlme8iV15r
HQAW0X7F2Un5h7eQwogWTDb9gBHKnJ4ApaSJLfZl9E72i0Sv7o9UFcLIdy2DRVSq
gxlRBVzVU6ZndCQ4vQXFSjQ20VGNXc2vpKVRE1D6YXxmxVNbBQB4
=lb6H
-----END PGP SIGNATURE-----
Merge tag 'v1.39.0rc3' into develop
Synapse 1.39.0rc3 (2021-07-28)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
Previously only world-readable rooms were shown. This means that
rooms which are public, knockable, or invite-only with a pending invitation,
are included in a space summary. It also applies the same logic to
the experimental room version from MSC3083 -- if a user has access
to the proper allowed rooms then it is shown in the spaces summary.
This change is made per MSC3173 allowing stripped state of a room to
be shown to any potential room joiner.
The idea here is to stop people sending things that aren't joins/leaves/knocks through these endpoints: previously you could send anything you liked through them. I wasn't able to find any security holes from doing so, but it doesn't sound like a good thing.
This implements refresh tokens, as defined by MSC2918
This MSC has been implemented client side in Hydrogen Web: vector-im/hydrogen-web#235
The basics of the MSC works: requesting refresh tokens on login, having the access tokens expire, and using the refresh token to get a new one.
Signed-off-by: Quentin Gliech <quentingliech@gmail.com>
If a room is remote and we don't have a user in it, always try to join it. It might fail if the room is invite-only, but we don't have a user to invite with, so at this point it's the best we can do.
Fixes#10233 (at least to some extent)
