mirror of https://mau.dev/maunium/synapse.git synced 2024-11-14 14:01:59 +01:00

Some links seemed to be incorrect (vector-im/sygnal and vector-im/sytest
have never been A Thing iirc) so pointed them back to matrix-org/*).

2024-02-06 09:26:55 +00:00

6.5 KiB

Raw Blame History

coturn TURN server

The following sections describe how to install coturn (which implements the TURN REST API).

`coturn` setup

Initial installation

The TURN daemon coturn is available from a variety of sources such as native package managers, or installation from source.

Debian and Ubuntu based distributions

Just install the debian package:

sudo apt install coturn

This will install and start a systemd service called coturn.

Source installation

Download the latest release from github. Unpack it and cd into the directory.
Configure it:
```
./configure
```
You may need to install libevent2: if so, you should do so in the way recommended by your operating system. You can ignore warnings about lack of database support: a database is unnecessary for this purpose.
Build and install it:
```
make
sudo make install
```

Configuration

Create or edit the config file in /etc/turnserver.conf. The relevant lines, with example values, are:
```
use-auth-secret
static-auth-secret=[your secret key here]
realm=turn.myserver.org
```
See turnserver.conf for explanations of the options. One way to generate the static-auth-secret is with pwgen:
```
pwgen -s 64 1
```
A realm must be specified, but its value is somewhat arbitrary. (It is sent to clients as part of the authentication flow.) It is conventional to set it to be your server name.
You will most likely want to configure coturn to write logs somewhere. The easiest way is normally to send them to the syslog:
```
syslog
```
(in which case, the logs will be available via journalctl -u coturn on a systemd system). Alternatively, coturn can be configured to write to a logfile - check the example config file supplied with coturn.

Consider your security settings. TURN lets users request a relay which will connect to arbitrary IP addresses and ports. The following configuration is suggested as a minimum starting point:

# VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay.
no-tcp-relay

# don't let the relay ever try to connect to private IP address ranges within your network (if any)
# given the turn server is likely behind your firewall, remember to include any privileged public IPs too.
denied-peer-ip=10.0.0.0-10.255.255.255
denied-peer-ip=192.168.0.0-192.168.255.255
denied-peer-ip=172.16.0.0-172.31.255.255

# recommended additional local peers to block, to mitigate external access to internal services.
# https://www.rtcsec.com/article/slack-webrtc-turn-compromise-and-bug-bounty/#how-to-fix-an-open-turn-relay-to-address-this-vulnerability
no-multicast-peers
denied-peer-ip=0.0.0.0-0.255.255.255
denied-peer-ip=100.64.0.0-100.127.255.255
denied-peer-ip=127.0.0.0-127.255.255.255
denied-peer-ip=169.254.0.0-169.254.255.255
denied-peer-ip=192.0.0.0-192.0.0.255
denied-peer-ip=192.0.2.0-192.0.2.255
denied-peer-ip=192.88.99.0-192.88.99.255
denied-peer-ip=198.18.0.0-198.19.255.255
denied-peer-ip=198.51.100.0-198.51.100.255
denied-peer-ip=203.0.113.0-203.0.113.255
denied-peer-ip=240.0.0.0-255.255.255.255

# special case the turn server itself so that client->TURN->TURN->client flows work
# this should be one of the turn server's listening IPs
allowed-peer-ip=10.0.0.1

# consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS.
user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user.
total-quota=1200

Also consider supporting TLS/DTLS. To do this, add the following settings to turnserver.conf:
```
# TLS certificates, including intermediate certs.
# For Let's Encrypt certificates, use `fullchain.pem` here.
cert=/path/to/fullchain.pem

# TLS private key file
pkey=/path/to/privkey.pem

# Ensure the configuration lines that disable TLS/DTLS are commented-out or removed
#no-tls
#no-dtls
```
In this case, replace the turn: schemes in the turn_uris settings below with turns:.

We recommend that you only try to set up TLS/DTLS once you have set up a basic installation and got it working.

NB: If your TLS certificate was provided by Let's Encrypt, TLS/DTLS will not work with any Matrix client that uses Chromium's WebRTC library. This currently includes Element Android & iOS; for more details, see their respective issues as well as the underlying WebRTC issue. Consider using a ZeroSSL certificate for your TURN server as a working alternative.
Ensure your firewall allows traffic into the TURN server on the ports you've configured it to listen on (By default: 3478 and 5349 for TURN traffic (remember to allow both TCP and UDP traffic), and ports 49152-65535 for the UDP relay.)
If your TURN server is behind NAT, the NAT gateway must have an external, publicly-reachable IP address. You must configure coturn to advertise that address to connecting clients:
```
external-ip=EXTERNAL_NAT_IPv4_ADDRESS
```
You may optionally limit the TURN server to listen only on the local address that is mapped by NAT to the external address:
```
listening-ip=INTERNAL_TURNSERVER_IPv4_ADDRESS
```
If your NAT gateway is reachable over both IPv4 and IPv6, you may configure coturn to advertise each available address:
```
external-ip=EXTERNAL_NAT_IPv4_ADDRESS
external-ip=EXTERNAL_NAT_IPv6_ADDRESS
```
When advertising an external IPv6 address, ensure that the firewall and network settings of the system running your TURN server are configured to accept IPv6 traffic, and that the TURN server is listening on the local IPv6 address that is mapped by NAT to the external IPv6 address.
(Re)start the turn server:
- If you used the Debian package (or have set up a systemd unit yourself):
```
sudo systemctl restart coturn
```
- If you built from source:
```
/usr/local/bin/turnserver -o
```

6.5 KiB Raw Blame History