Commit graph

66 commits

Author SHA1 Message Date
Rémi Verschelde
e0574e1d98 Fix typos with codespell
Using codespell 1.15.0.

Method:
```
$ cat > ../godot-word-whitelist.txt << EOF
ang
curvelinear
doubleclick
leapyear
lod
merchantibility
nd
numer
ois
ony
que
seeked
synching
te
uint
unselect
webp
EOF

$ codespell -w -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po"
$ git diff // undo unwanted changes
```
2019-05-19 13:10:35 +02:00
Daniel Rakos
6dd65c0d67 KinematicBody performance and quality improvements
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.

List of fixes and improvements:

- Fixed a general bug in move_and_slide that affects both GodotPhysics and
  Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
  is disabled. Not sure where that came from, but looking at the 2D physics
  code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
  tests against individual shapes of compound shapes. This is crucial to get
  good performance with Gridmaps and in general improves the performance
  whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
  module for KinematicBodies to also do broadphase on the sub-shapes of
  compound collision shapes. This is possible thanks to the dynamic AABB
  tree that was previously disabled and it's the change that provides the
  biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
  once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
  was completely broken previously, overwriting previous results and similar
  non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
  not respected at all, and the KinematicBody code for ray separation was
  complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
  used in the ray result array.

There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").

Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
2019-03-27 00:39:47 +01:00
Rémi Verschelde
e22f6e9ace
Revert "Optimized area check" 2019-02-22 12:46:54 +01:00
Rémi Verschelde
ced77db950
Merge pull request #26111 from AndreaCatania/areaopti
Optimized area check
2019-02-21 13:58:38 +01:00
Andrea Catania
b1934cfd0d Optimized area check 2019-02-21 08:41:31 +01:00
Rémi Verschelde
2f9b7e6b63
Merge pull request #25788 from aqnuep/rayshape_fix
Fix RayShape collision when used with a KinematicBody (Bullet Physics)
2019-02-19 14:42:04 +01:00
Daniel Rakos
f7511511b1 Fix RayShape collision when used with a KinematicBody (Bullet Physics)
- Added code handling non-compound collision to recover_from_penetration_ray()
  which is now needed due to the optimization avoiding the use of compound
  collisions when only a single collision shape is used.
- Removed arbitrary margin applied in the collision algorithm of RayShapes
  which causes jittered movement. For lack of a better replacement and for
  lack of any explanation on why it has been introduced, it's now using the
  shape's margin property instead which is small enough to not show visible
  jitter.
- Tried to get rid of inconsistent uses of the collision margin.
- Removed hack from GodotDeepPenetrationContactResultCallback::addContactPoint
  for RayShape collision as it's no longer needed as the collision algorithm
  of RayShapes correctly calculates the contact normal for a while now.

Fixes #25227.
2019-02-19 11:16:05 +01:00
Andrea Catania
66420aea9c Fixed area collision report with concave 2019-02-18 14:15:27 +01:00
Andrea Catania
90d05cbe30 Added support to scale areas 2019-02-18 12:57:55 +01:00
Andrea Catania
a9214bcee7 Fixed area overlaps if not move 2019-01-21 08:30:49 +01:00
Rémi Verschelde
b16c309f82 Update copyright statements to 2019
Happy new year to the wonderful Godot community!
2019-01-01 12:58:10 +01:00
Andrea Catania
c6e6249143 Improved algorithm that check collision 2018-11-22 09:03:21 +01:00
Andrea Catania
15305ec91f Optimitzed area overlap checks 2018-10-07 07:14:38 +02:00
Andrea Catania
62fc66291b Removed wrong equal vertex thresold to GJK solver 2018-10-05 10:51:24 +02:00
Andrea Catania
821bc40dc8 Added correct allowed penetration parameter to cast motion API 2018-10-05 10:44:10 +02:00
Rémi Verschelde
2091f20443 Fix warnings about wrong member initialization order [-Wreorder]
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning:   'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning:   'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning:   'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning:   'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning:   when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning:   'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning:   'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning:   'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning:   'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning:   'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning:   'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning:   'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning:   'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning:   'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning:   'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning:   'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning:   'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning:   'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning:   'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning:   when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning:   'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning:   'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning:   'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning:   'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning:   when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning:   'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning:   'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning:   'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning:   when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning:   'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning:   when initialized here [-Wreorder]
```

Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
2018-09-28 17:30:28 +02:00
Andrea Catania
d226ba7c2b Corrected cast_motion query behaviour 2018-09-22 11:17:31 +02:00
Andrea Catania
29e01f97e4 Added rayshape solver algorithm to soft body configurator fixes #22283 fixes #22249 fixes #22281 2018-09-22 09:42:19 +02:00
Andrea Catania
42f2ff2f8d Added check to prevent contact signal to happen too early 2018-09-19 19:01:59 +02:00
Rémi Verschelde
277b24dfb7 Make core/ includes absolute, remove subfolders from include path
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
2018-09-12 09:52:22 +02:00
Andrea Catania
88967e4001 Fixing trimesh precision 2018-09-06 18:53:03 +02:00
Andrea Catania
9b446f1cc3 Optimized in case is used just 1 shape with no transform 2018-09-06 18:19:05 +02:00
Andrea Catania
ce138d3449 Fixed bullet area vs Trimesh shape overlap 2018-09-05 13:43:02 +02:00
Ibrahn Sahir
2a823a38ac Initialise rays_found count in test_ray_separation.
Prevents branch on uninit that could result in crashes with
move_and_slide.
2018-08-29 13:23:14 +01:00
Andrea Catania
64b5eaf43c Correctly set safe_motion on cast_motion query Fixes: #21212 2018-08-26 12:09:52 +02:00
Andrea Catania
0b98834b77 Added ray / shape / point / motion / rest cast exclusion of area and or body 2018-08-21 18:51:08 +02:00
Juan Linietsky
d88d0d457d Fixes to move and slide and ray separation, implement separation in Godot physics 2018-08-20 17:31:55 -03:00
Andrea Catania
0010d9c82a Added ray shape and move_and_slide with snapping on 3D.
Added stop_on_slope on 2d part
2018-08-19 13:45:23 +02:00
Andrea Catania
9826456f2e Improved move_and_slide function to stay on slope and fall on steep slope 2018-08-18 15:11:51 +02:00
Juan Linietsky
14fd797c53
Merge pull request #20381 from AndreaCatania/phymat_2
Improved Physics material
2018-08-07 15:31:26 -03:00
Andrea Catania
5e65e28eed Removed physics material combination mode. Added rough and absorbent parameter to material. Fixed 'change' signal connection 2018-08-07 19:38:04 +02:00
Rémi Verschelde
ef93fec789
Merge pull request #15643 from organicpencil/bullet_contact_impulse
Expose PhysicsDirectBodyState.get_contact_impulse
2018-07-26 15:36:37 +02:00
Hein-Pieter van Braam
0e29f7974b Reduce unnecessary COW on Vector by make writing explicit
This commit makes operator[] on Vector const and adds a write proxy to it.  From
now on writes to Vectors need to happen through the .write proxy. So for
instance:

Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;

Failing to use the .write proxy will cause a compilation error.

In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.

_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
2018-07-26 00:54:16 +02:00
AndreaCatania
17ebbfb56d Implemented Soft body
- Soft Body Physics node
- Soft Body Rendering
- Soft body Editor
- Soft body importer
2018-07-23 20:50:23 +02:00
Juan Linietsky
1ad20dc2f1
Merge pull request #12403 from AndreaCatania/phymat
Physics material
2018-07-23 07:37:03 -03:00
Andrea Catania
97a1011ba1 Improved kinematic test_body_motion code 2018-05-27 14:55:52 +02:00
AndreaCatania
5f66734d2d Implemented physics material
Hidden a function

Fixed travis static check
2018-05-11 03:23:09 +02:00
tagcup
a5e0bb447c Avoid converting Quat to Euler angles when not necessary.
Also ensure that get_scale doesn't arbitrarlity change the signs of scales, ensuring that the combination of get_rotation and get_scale gives the correct basis.

Added various missing functions and constructors.

Should close #17968.
2018-04-14 15:53:25 -04:00
Andrea Catania
df2a626b49 Fixed wrong function call 2018-04-12 11:02:43 +02:00
Andrea Catania
f0abdf06ad
Rigidbody wake up when hitten by a kinematic body 2018-04-12 07:59:12 +02:00
Rémi Verschelde
e1fef9bd76
Merge pull request #17959 from AndreaCatania/kinfix2
Fixed kinematic sliding on trimesh
2018-04-04 11:21:49 +02:00
Andrea Catania
b050525072 Fixed kinematic sliding on trimesh 2018-04-04 10:49:10 +02:00
Andrea Catania
fe768f4f00 physics area added monitorable check 2018-04-01 11:27:18 +02:00
Andrea Catania
0e446f8aff Fixed kinematic char sliding 2018-02-25 21:05:14 +01:00
luz.paz
612ab4bbc6 Fix typos with codespell
Found via `codespell -q 3 --skip="./thirdparty,./editor/translations" -I ../godot-word-whitelist.txt`
Whitelist consists of:
```
ang
doubleclick
lod
nd
que
te
unselect
```
2018-02-21 19:46:06 +01:00
Andrea Catania
6ed392f47a Improved kinematic body 2D and 3D, Now can move rigid body 2018-02-20 12:43:47 +01:00
Andrea Catania
f48845428d Added return true o collide when no rusult is NULL 2018-02-14 08:18:48 +01:00
Paolo Perkovic
08d4bfacaf Fix inconsistencies and typos in argument names 2018-02-01 16:47:20 +01:00
Lee Pugh
ac26bf0fb4 Expose PhysicsDirectBodyState.get_contact_impulse 2018-01-12 15:27:45 -06:00
AndreaCatania
50c99370d2 Fixed Bullet collision shapes scale 2018-01-08 16:44:33 +01:00