Commit graph

263 commits

Author SHA1 Message Date
Daniel Rakos
6dd65c0d67 KinematicBody performance and quality improvements
With this change finally one can use compound collisions (like those created
by Gridmaps) without serious performance issues. The previous KinematicBody
code for Bullet was practically doing a whole bunch of unnecessary
calculations. Gridmaps with fairly large octant sizes (in my case 32) can get
up to 10000x speedup with this change (literally!). I expect the FPS demo to
get a fair speedup as well.

List of fixes and improvements:

- Fixed a general bug in move_and_slide that affects both GodotPhysics and
  Bullet, where ray shapes would be ignored unless the stop_on_slope parameter
  is disabled. Not sure where that came from, but looking at the 2D physics
  code it was obvious there's a difference.
- Enabled the dynamic AABB tree that Bullet uses to allow broadphase collision
  tests against individual shapes of compound shapes. This is crucial to get
  good performance with Gridmaps and in general improves the performance
  whenever a KinematicBody collides with compound collision shapes.
- Added code to the broadphase collision detection code used by the Bullet
  module for KinematicBodies to also do broadphase on the sub-shapes of
  compound collision shapes. This is possible thanks to the dynamic AABB
  tree that was previously disabled and it's the change that provides the
  biggest performance boost.
- Now broadphase test is only done once per KinematicBody in Bullet instead of
  once per each of its shapes which was completely unnecessary.
- Fixed the way how the ray separation results are populated in Bullet which
  was completely broken previously, overwriting previous results and similar
  non-sense.
- Fixed ray shapes for good now. Previously the margin set in the editor was
  not respected at all, and the KinematicBody code for ray separation was
  complete bogus, thus all previous attempts to fix it were mislead.
- Fixed an obvious bug also in GodotPhysics where an out-of-bounds index was
  used in the ray result array.

There are a whole set of other problems with the KinematicBody code of Bullet
which cost performance and may cause unexpected behavior, but those are not
addressed in this change (need to keep it "simple").

Not sure whether this fixes any outstanding Github issues but I wouldn't be
surprised.
2019-03-27 00:39:47 +01:00
Juan Linietsky
b84b015225 Make query checks less agressive, fixes #24694 2019-03-02 08:48:47 -03:00
marxin
c11e7ffd0e Fix warnings seen with -Wignored-qualifiers. 2019-02-21 20:24:29 +01:00
marxin
8d51618949 Add -Wshadow=local to warnings and fix reported issues.
Fixes #25316.
2019-02-20 19:44:12 +01:00
Juan Linietsky
6d4eaebe1e Support multiple ray shapes in kinematicbody, fixes #25050 2019-02-16 16:15:22 -03:00
Juan Linietsky
ee464f56c4 Add a minimum treshold for acquiring rest contacts to avoid numerical precision issues. Fixes #25074 2019-02-16 13:45:01 -03:00
Juan Linietsky
f439b786ea Allow kinematic bodies without shapes to still move, fixes #24775 2019-02-16 11:06:44 -03:00
Rémi Verschelde
5fc86026ca Fix typos with codespell
Using codespell 1.14.0.

Method:
```
$ cat > ../godot-word-whitelist.txt << EOF
ang
doubleclick
lod
nd
numer
que
te
unselect
EOF
$ codespell -w -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po"
$ git diff // undo unwanted changes
```
2019-02-13 09:23:29 +01:00
Rémi Verschelde
b7cc2bb1e2 Core: Ensure classes match their header filename
Also drop some unused files.

Renamed:
- `core/dvector.h` -> `pool_vector.h`
- `core/io/resource_import.h` -> `resource_importer.h`
- `core/sort.h` -> `sort_array.h`
- `core/string_db.h` -> `string_name.h`

Dropped:
- `core/allocators.h`
- `core/os/shell.h`
- `core/variant_construct_string.cpp`
2019-02-12 13:34:25 +01:00
Aaron Franke
3f837d5cc5 [Core] Rename Matrix3 file to Basis
The code already referred to "Basis", it's just the file name that was different for some reason.
2019-02-09 14:42:23 -05:00
Rémi Verschelde
b16c309f82 Update copyright statements to 2019
Happy new year to the wonderful Godot community!
2019-01-01 12:58:10 +01:00
Stanislav
9edf98e841 Disabled CollisionShape and CollisionShape2D are not processed now
Fixes #24183
2018-12-12 17:48:35 +03:00
Andrea Catania
a395d809a5 Added function to control 6DOF precision 2018-11-27 07:11:28 +01:00
Rémi Verschelde
5075e372f3
Merge pull request #23668 from sdfgeoff/fix_angular_constraints
Exposing more of bullets 6DOF spring constraints
2018-11-17 16:15:33 +01:00
Juan Linietsky
0b1e93ccd4 -Make sure monitorable cant be flipped while flushing queries, fixes #17330
-Also added set_deferred, this was missing.
2018-11-16 08:49:26 -03:00
Geoffrey Irons
e149327be0 Added angular restitution
Adding angular and linear springs

Added getters
2018-11-13 09:24:00 +01:00
Juan Linietsky
64f649a80c -Fix problem in OWC logic closes #11357
-Fix problem with kinematic move and disabled shapes, in both 2D and 3D
2018-11-02 15:45:36 -03:00
Juan Linietsky
b776049b83 Update 3D physics to match fix from #22933 2018-11-01 12:40:20 -03:00
Rémi Verschelde
1169196f04
Merge pull request #22779 from Superwaitsum/LimitSettings
Limit several project settings
2018-10-25 11:38:06 +02:00
Superwaitsum
e5041ad0f5 Add some limits on the Editor Settings 2018-10-24 19:46:33 -05:00
M. Huri
90efe5be08 Fixed a typo, treshhold to threshold. 2018-10-23 03:46:16 +07:00
M. Huri
55c8fda884 Removed duplication of include(s):
- "collision_solver_sat.h".
- "shaders/copy.glsl.gen.h"
2018-10-13 20:25:34 +07:00
Rémi Verschelde
bf6dcb9105
Merge pull request #22722 from akien-mga/fix-warnings
Fix more "may be used initialized" warnings from GCC 7
2018-10-07 11:07:13 +02:00
Aaron Franke
4f7b33cdcf Remove redundant "== false" code
Some of this code has been re-organized.
f
2018-10-06 16:20:41 -04:00
Rémi Verschelde
3e9740ac93 Fix more "may be used initialized" warnings from GCC 7
Fixes the following GCC 7 warnings:
```
core/cowdata.h:269:47: warning: 'alloc_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/error_macros.h:163:26: warning: 'nearest_point' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1579:5: warning: 'colormap_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1582:12: warning: 'size_height' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1590:23: warning: 'size_width' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/image.cpp:1599:29: warning: 'pixel_size' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:207:15: warning: 'tri_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
core/math/face3.cpp:209:15: warning: 'tri_min' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_scene_gles3.cpp:665:22: warning: 'best_used_frame' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:865:27: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/rasterizer_storage_gles3.cpp:980:29: warning: 'blit_target' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::frag_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::id' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/gles3/shader_gles3.h:122:9: warning: '<anonymous>.ShaderGLES3::Version::vert_id' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/plugins/script_editor_plugin.cpp:1980:31: warning: 'se' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/scene_tree_dock.cpp:840:30: warning: 'new_node' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'a1' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4259:9: warning: 'lul' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4260:9: warning: 'a2' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4261:9: warning: 'a3' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4265:3: warning: 'enable_lin' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4294:3: warning: 'enable_ang' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'll' may be used uninitialized in this function [-Wmaybe-uninitialized]
editor/spatial_editor_gizmos.cpp:4311:34: warning: 'ul' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1655:47: warning: 'cone_dirs' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/3d/voxel_light_baker.cpp:1656:73: warning: 'cone_weights' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cp' may be used uninitialized in this function [-Wmaybe-uninitialized]
scene/gui/texture_progress.cpp:181:6: warning: 'cq' may be used uninitialized in this function [-Wmaybe-uninitialized]
servers/physics/shape_sw.cpp:1056:19: warning: 'support_max' may be used uninitialized in this function [-Wmaybe-uninitialized]
```
2018-10-04 18:54:20 +02:00
Rémi Verschelde
b1b625f4f5 Fix various Clang 7 warnings about unused stuff
Namely:
[-Wunneeded-internal-declaration]
[-Wunused-comparison]
[-Wunused-const-variable]
[-Wunused-function]
[-Wunused-private-fields]

Fixes the following Clang 7 warnings:
```
editor/plugins/script_editor_plugin.cpp:1417:20: warning: function '_find_node_with_script' is not needed and will not be emitted [-Wunneeded-internal-declaration]
editor/scene_tree_dock.cpp:1859:14: warning: function '_find_last_visible' is not needed and will not be emitted [-Wunneeded-internal-declaration]

modules/gdscript/gdscript_parser.cpp:7838:19: warning: equality comparison result unused [-Wunused-comparison]

scene/resources/mesh.cpp:549:35: warning: unused variable '_array_types' [-Wunused-const-variable]
scene/resources/mesh.cpp:563:18: warning: unused variable '_format_translate' [-Wunused-const-variable]

drivers/gles3/rasterizer_scene_gles3.cpp:54:28: warning: unused function 'store_transform2d' [-Wunused-function]

core/io/file_access_network.h:50:6: warning: private field 'ml' is not used [-Wunused-private-field]
core/io/file_access_zip.h:93:14: warning: private field 'archive' is not used [-Wunused-private-field]
core/io/resource_format_binary.h:122:6: warning: private field 'bin_meta_idx' is not used [-Wunused-private-field]
core/message_queue.h:47:9: warning: private field 'mutex' is not used [-Wunused-private-field]
main/tests/test_gui.cpp:63:11: warning: private field 'control' is not used [-Wunused-private-field]
modules/gdscript/gdscript_parser.h:558:7: warning: private field 'completion_static' is not used [-Wunused-private-field]
platform/x11/os_x11.h:148:11: warning: private field 'ip_unix' is not used [-Wunused-private-field]
platform/x11/os_x11.h:180:7: warning: private field 'net_wm_icon' is not used [-Wunused-private-field]
platform/x11/os_x11.h:189:6: warning: private field 'audio_driver_index' is not used [-Wunused-private-field]
platform/x11/os_x11.h:190:15: warning: private field 'capture_idle' is not used [-Wunused-private-field]
servers/physics/body_pair_sw.h:79:6: warning: private field 'cc' is not used [-Wunused-private-field]
servers/visual/visual_server_raster.h:62:7: warning: private field 'draw_extra_frame' is not used [-Wunused-private-field]
```
2018-10-01 17:32:12 +02:00
Rémi Verschelde
2091f20443 Fix warnings about wrong member initialization order [-Wreorder]
Fixes the following GCC 5 warnings:
```
core/object.h:193:11: warning: 'MethodInfo::flags' will be initialized after [-Wreorder]
core/object.h:192:15: warning:   'PropertyInfo MethodInfo::return_val' [-Wreorder]
core/object.cpp:278:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:97:6: warning: 'ScriptDebuggerRemote::max_cps' will be initialized after [-Wreorder]
core/script_debugger_remote.h:91:6: warning:   'int ScriptDebuggerRemote::max_messages_per_frame' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
core/script_debugger_remote.h:98:6: warning: 'ScriptDebuggerRemote::char_count' will be initialized after [-Wreorder]
core/script_debugger_remote.h:92:6: warning:   'int ScriptDebuggerRemote::n_messages_dropped' [-Wreorder]
core/script_debugger_remote.cpp:1086:1: warning:   when initialized here [-Wreorder]
modules/bullet/area_bullet.h:102:7: warning: 'AreaBullet::isScratched' will be initialized after [-Wreorder]
modules/bullet/area_bullet.h:92:39: warning:   'PhysicsServer::AreaSpaceOverrideMode AreaBullet::spOv_mode' [-Wreorder]
modules/bullet/area_bullet.cpp:46:1: warning:   when initialized here [-Wreorder]
modules/bullet/collision_object_bullet.h:127:15: warning: 'CollisionObjectBullet::space' will be initialized after [-Wreorder]
modules/bullet/collision_object_bullet.h:117:7: warning:   'CollisionObjectBullet::Type CollisionObjectBullet::type' [-Wreorder]
modules/bullet/collision_object_bullet.cpp:67:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:48:7: warning: 'GodotRayWorldAlgorithm::m_ownManifol1d' will be initialized after [-Wreorder]
modules/bullet/godot_ray_world_algorithm.h:46:33: warning:   'const btDiscreteDynamicsWorld* GodotRayWorldAlgorithm::m_world' [-Wreorder]
modules/bullet/godot_ray_world_algorithm.cpp:50:1: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:91:18: warning: 'GodotAllConvexResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:89:6: warning:   'int GodotAllConvexResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:93:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:142:18: warning: 'GodotAllContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:140:6: warning:   'int GodotAllContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:147:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:168:18: warning: 'GodotContactPairContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:166:6: warning:   'int GodotContactPairContactResultCallback::m_resultMax' [-Wreorder]
modules/bullet/godot_result_callbacks.h:173:2: warning:   when initialized here [-Wreorder]
modules/bullet/godot_result_callbacks.h:195:18: warning: 'GodotRestInfoContactResultCallback::m_exclude' will be initialized after [-Wreorder]
modules/bullet/godot_result_callbacks.h:191:7: warning:   'bool GodotRestInfoContactResultCallback::m_collided' [-Wreorder]
modules/bullet/godot_result_callbacks.h:199:2: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:200:9: warning: 'RigidBodyBullet::gravity_scale' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:199:9: warning:   'real_t RigidBodyBullet::mass' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:222:28: warning: 'RigidBodyBullet::force_integration_callback' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:219:7: warning:   'bool RigidBodyBullet::isTransformChanged' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/rigid_body_bullet.h:220:7: warning: 'RigidBodyBullet::previousActiveState' will be initialized after [-Wreorder]
modules/bullet/rigid_body_bullet.h:208:6: warning:   'int RigidBodyBullet::maxCollisionsDetection' [-Wreorder]
modules/bullet/rigid_body_bullet.cpp:258:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:69:9: warning: 'SoftBodyBullet::total_mass' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:68:6: warning:   'int SoftBodyBullet::simulation_precision' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/soft_body_bullet.h:76:9: warning: 'SoftBodyBullet::drag_coefficient' will be initialized after [-Wreorder]
modules/bullet/soft_body_bullet.h:61:14: warning:   'btSoftBody* SoftBodyBullet::bt_soft_body' [-Wreorder]
modules/bullet/soft_body_bullet.cpp:38:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:97:22: warning: 'SpaceBullet::solver' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:95:35: warning:   'btDefaultCollisionConfiguration* SpaceBullet::collisionConfiguration' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/bullet/space_bullet.h:101:23: warning: 'SpaceBullet::soft_body_world_info' will be initialized after [-Wreorder]
modules/bullet/space_bullet.h:99:23: warning:   'btGhostPairCallback* SpaceBullet::ghostPairCallback' [-Wreorder]
modules/bullet/space_bullet.cpp:333:1: warning:   when initialized here [-Wreorder]
modules/gdnative/nativescript/nativescript.h:79:13: warning: 'NativeScriptDesc::base_native_type' will be initialized after [-Wreorder]
modules/gdnative/nativescript/nativescript.h:73:9: warning:   'String NativeScriptDesc::documentation' [-Wreorder]
modules/gdnative/nativescript/nativescript.h:88:9: warning:   when initialized here [-Wreorder]
modules/gdscript/gdscript.h:296:6: warning: 'GDScriptWarning::line' will be initialized after [-Wreorder]
modules/gdscript/gdscript.h:294:4: warning:   'GDScriptWarning::Code GDScriptWarning::code' [-Wreorder]
modules/gdscript/gdscript.h:303:2: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:544:7: warning: 'PhysicalBone::simulate_physics' will be initialized after [-Wreorder]
scene/3d/physics_body.h:543:7: warning:   'bool PhysicalBone::_internal_static_body' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/physics_body.h:546:6: warning: 'PhysicalBone::bone_id' will be initialized after [-Wreorder]
scene/3d/physics_body.h:539:12: warning:   'Skeleton* PhysicalBone::parent_skeleton' [-Wreorder]
scene/3d/physics_body.cpp:2502:1: warning:   when initialized here [-Wreorder]
scene/3d/spring_arm.h:44:11: warning: 'SpringArm::mask' will be initialized after [-Wreorder]
scene/3d/spring_arm.h:43:8: warning:   'float SpringArm::current_spring_length' [-Wreorder]
scene/3d/spring_arm.cpp:37:1: warning:   when initialized here [-Wreorder]
scene/animation/skeleton_ik.h:159:11: warning: 'SkeletonIK::target_node_override' will be initialized after [-Wreorder]
scene/animation/skeleton_ik.h:152:7: warning:   'bool SkeletonIK::use_magnet' [-Wreorder]
scene/animation/skeleton_ik.cpp:418:1: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:84:9: warning: 'TileSet::AutotileData::size' will be initialized after [-Wreorder]
scene/resources/tile_set.h:83:7: warning:   'int TileSet::AutotileData::spacing' [-Wreorder]
scene/resources/tile_set.h:92:12: warning:   when initialized here [-Wreorder]
scene/resources/tile_set.h:115:12: warning: 'TileSet::TileData::tile_mode' will be initialized after [-Wreorder]
scene/resources/tile_set.h:114:9: warning:   'Color TileSet::TileData::modulate' [-Wreorder]
scene/resources/tile_set.h:120:12: warning:   when initialized here [-Wreorder]
servers/physics/body_sw.h:84:19: warning: 'BodySW::direct_state_query_list' will be initialized after [-Wreorder]
servers/physics/body_sw.h:57:11: warning:   'uint16_t BodySW::locked_axis' [-Wreorder]
servers/physics/body_sw.cpp:756:1: warning:   when initialized here [-Wreorder]
```

Nothing really relevant for us, but it's not a bad consistency
improvement anyway so worth taking.
2018-09-28 17:30:28 +02:00
Rémi Verschelde
3a2ca68af3 SCons: Build thirdparty code in own env, disable warnings
Also remove unnecessary `Export('env')` in other SCsubs,
Export should only be used when exporting *new* objects.
2018-09-28 14:07:39 +02:00
Rémi Verschelde
7b081a7fc8 Fix warnings about unhandled enum value in switch [-Wswitch]
Fixes GCC 5 warnings of the form:

core/io/http_client.cpp:288:9: warning: enumeration value 'STATUS_SSL_HANDSHAKE_ERROR' not handled in switch [-Wswitch]
core/io/marshalls.cpp:806:9: warning: enumeration value 'AABB' not handled in switch [-Wswitch]

Those can be trivial cases where adding a default fallback is the solution,
or more complex issues/hidden bugs where missed values are actually meant
to be handled.
2018-09-27 18:34:30 +02:00
Rémi Verschelde
1a16dabfb5
Merge pull request #21982 from luzpaz/misc-typos
Misc. typos
2018-09-13 10:59:00 +02:00
luz.paz
08bde5b2de Misc. typos
Found via `codespell -q 3 -I ../godot-word-whitelist.txt --skip="./thirdparty,*.po"`
2018-09-12 21:39:17 -04:00
Rémi Verschelde
277b24dfb7 Make core/ includes absolute, remove subfolders from include path
This allows more consistency in the manner we include core headers,
where previously there would be a mix of absolute, relative and
include path-dependent includes.
2018-09-12 09:52:22 +02:00
Rémi Verschelde
52466d57e9 Make some debug prints verbose-only, remove others 2018-08-24 14:59:01 +02:00
Juan Linietsky
ee07fb5ebe Changes to ClippedCamera, RayCast,Raycast2D and 2D physics API to add ability to choose between bodies and areas when colliding. 2018-08-21 15:31:23 -03:00
Andrea Catania
0b98834b77 Added ray / shape / point / motion / rest cast exclusion of area and or body 2018-08-21 18:51:08 +02:00
Rémi Verschelde
912131fe03
Merge pull request #20101 from panzergame/shape_margin
Expose bullet shape margin to UI.
2018-08-21 16:17:11 +02:00
Juan Linietsky
d88d0d457d Fixes to move and slide and ray separation, implement separation in Godot physics 2018-08-20 17:31:55 -03:00
Andrea Catania
0010d9c82a Added ray shape and move_and_slide with snapping on 3D.
Added stop_on_slope on 2d part
2018-08-19 13:45:23 +02:00
Tristan Porteries
e5bfa98d0f Expose bullet shape margin to UI.
The margin value is exposed into the UI for shape ressource.
This value can be modified through set_margin and get from get_margin
or by using the property margin. Each time the margin is modified
the associated collision shape is recreated and the margin value is
used in ShapeBullet::prepare.
2018-08-16 16:58:15 +02:00
Juan Linietsky
978505a90a
Merge pull request #20727 from muiroc/fix_sw_sat_table
fixed godotphysics sat dispatch table
2018-08-08 09:49:48 -03:00
Juan Linietsky
14fd797c53
Merge pull request #20381 from AndreaCatania/phymat_2
Improved Physics material
2018-08-07 15:31:26 -03:00
Andrea Catania
5e65e28eed Removed physics material combination mode. Added rough and absorbent parameter to material. Fixed 'change' signal connection 2018-08-07 19:38:04 +02:00
muiroc
14a227e9e7 fixed godotphysics sat dispatch table 2018-08-05 00:02:14 +02:00
Rémi Verschelde
03e11c13bf Add check to clang 6.0 compiler bug workaround
Extending on b68222e4e7 to ensure that it still
has the exact same behaviour as the previous code, as discussed with @hpvb.
2018-07-26 17:25:16 +02:00
Rémi Verschelde
ef93fec789
Merge pull request #15643 from organicpencil/bullet_contact_impulse
Expose PhysicsDirectBodyState.get_contact_impulse
2018-07-26 15:36:37 +02:00
Hein-Pieter van Braam
0e29f7974b Reduce unnecessary COW on Vector by make writing explicit
This commit makes operator[] on Vector const and adds a write proxy to it.  From
now on writes to Vectors need to happen through the .write proxy. So for
instance:

Vector<int> vec;
vec.push_back(10);
std::cout << vec[0] << std::endl;
vec.write[0] = 20;

Failing to use the .write proxy will cause a compilation error.

In addition COWable datatypes can now embed a CowData pointer to their data.
This means that String, CharString, and VMap no longer use or derive from
Vector.

_ALWAYS_INLINE_ and _FORCE_INLINE_ are now equivalent for debug and non-debug
builds. This is a lot faster for Vector in the editor and while running tests.
The reason why this difference used to exist is because force-inlined methods
used to give a bad debugging experience. After extensive testing with modern
compilers this is no longer the case.
2018-07-26 00:54:16 +02:00
Rémi Verschelde
f778bd8e69
Merge pull request #20404 from TigerCaldwell/master
Ensured consistency between RigidBody, PhysicsDirectBodyState, PhysicsServers and their 2D counterparts
2018-07-25 08:25:34 +02:00
Tiger Caldwell
40c7716586 Modified RigidBody, PhysicsDirectBodyState, PhysicsServer, and their respective 2D counterparts to be more consistent and to include more useful methods.
RigidBody:
- Added add_central_force
- Added add_force
- Added add_torque
- Added apply_central_impulse

RigidBody2D:
- Added add_central_force
- Added add_torque
- Added apply_central_impulse
- Added apply_torque_impulse

PhysicsDirectBodyState:
- Added apply_central_impulse

Physics2DDirectBodyState:
- Added add_central_force
- Added add_force
- Added add_torque
- Added apply_central_impulse
- Added apply_impulse
- Added apply_torque_impulse

PhysicsServer:
- Added body_add_force
- Added body_add_torque
- Added body_add_central_force
- Added body_apply_central_impulse

Physics2DServer:
- Added body_add_torque
- Added body_add_central_force
- Added body_apply_central_impulse
- Added body_apply_torque_impulse

Also fixed some small bugs along the way
2018-07-24 05:00:56 -04:00
Wilson E. Alvarez
a22e746bc3 Removed unnecessary assignments 2018-07-24 09:51:03 +02:00
AndreaCatania
17ebbfb56d Implemented Soft body
- Soft Body Physics node
- Soft Body Rendering
- Soft body Editor
- Soft body importer
2018-07-23 20:50:23 +02:00
Juan Linietsky
1ad20dc2f1
Merge pull request #12403 from AndreaCatania/phymat
Physics material
2018-07-23 07:37:03 -03:00
Juan Linietsky
2b9902db06 -Fix disable_3d flag
-Add extra flag optimize=[size,speed] to be able to prioritize size
2018-07-21 17:26:49 -03:00
muiroc
0a36e974da added cylinder shape support 2018-07-01 11:16:54 +02:00
bruvzg
b68222e4e7
Workaround for clang 6 bug. 2018-05-14 18:11:26 +03:00
AndreaCatania
5f66734d2d Implemented physics material
Hidden a function

Fixed travis static check
2018-05-11 03:23:09 +02:00
Rémi Verschelde
bf7ca623a6 Fix Coverity reports of uninitialized scalar variable
Fixes most current reports on Coverity Scan of uninitialized scalar
variable (CWE-457): https://cwe.mitre.org/data/definitions/457.html

These happen most of the time (in our code) when instanciating structs
without a constructor (or with an incomplete one), and later returning
the instance. This is sometimes intended though, as some parameters are
only used in some situations and should not be double-initialized for
performance reasons (e.g. `constant` in ShaderLanguage::Token).
2018-04-19 15:20:45 +02:00
Juan Linietsky
10448063c4
Merge pull request #17594 from ivodopiviz/float-overflow
Changed debug max distance to avoid overflow
2018-04-08 09:14:29 -03:00
Marcelo Fernandez
9042ef3836 Fix missing const in CapsuleShapeSW::get_area 2018-03-21 23:58:40 -03:00
Ivan Vodopiviz
55f79f2e80 Changed debug max distance to avoid overflow
Changed it to roughly sqrt(FLT_MAX), it's a little less to account for float inaccuracies.
Fixes #1835
2018-03-17 23:32:07 +01:00
Rémi Verschelde
497a4e9e25
Merge pull request #16757 from AndreaCatania/kinpush
Improved kinematic body, Now can move rigid body
2018-02-20 15:41:10 +01:00
Andrea Catania
6ed392f47a Improved kinematic body 2D and 3D, Now can move rigid body 2018-02-20 12:43:47 +01:00
Rémi Verschelde
b2aeb02e7d
Merge pull request #16530 from AndreaCatania/rays
Improved ray shape (2D and 3D) by addiing the possibility to act as r…
2018-02-19 22:15:49 +01:00
Andrea Catania
ffc3ef8677 Improved ray shape (2D and 3D) by addiing the possibility to act as regular shape 2018-02-19 20:59:57 +01:00
Rémi Verschelde
be67f2e4ba
Merge pull request #16751 from AndreaCatania/moreAPIs
Added Physics state APIs
2018-02-19 20:22:18 +01:00
Artem Varaksa
d35e486228 Clean up some bad words from code comments 2018-02-17 16:00:39 +03:00
Andrea Catania
a930797c31 Added Physics state APIs 2018-02-16 17:48:07 +01:00
Andrea Catania
a42765dada Added physics API in order to enable/disable collisions between rigidbody attached to a joint with bullet physics bullet
Fixes #16424
2018-02-05 18:54:07 +01:00
Paolo Perkovic
08d4bfacaf Fix inconsistencies and typos in argument names 2018-02-01 16:47:20 +01:00
Lee Pugh
ac26bf0fb4 Expose PhysicsDirectBodyState.get_contact_impulse 2018-01-12 15:27:45 -06:00
Rémi Verschelde
e4213e66b2 Add missing copyright headers and fix formatting
Using `misc/scripts/fix_headers.py` on all Godot files.
Some missing header guards were added, and the header inclusion order
was fixed in the Bullet module.
2018-01-05 01:22:23 +01:00
Rémi Verschelde
b50a9114b1 Update copyright statements to 2018
Happy new year to the wonderful Godot community!
2018-01-01 14:40:47 +01:00
AndreaCatania
5dee44bbc1 Implemented physics linear and angular lock 2017-12-10 17:21:14 +01:00
Rémi Verschelde
25b36f18d3
Merge pull request #12756 from Stratos695/master
Allowing double-axis lock in RigidBody & KinematicBody (Fixes #12500)
2017-12-09 13:01:41 +01:00
Rémi Verschelde
13c2ff9320 Style: Apply new clang-format 5.0 style to all files 2017-12-07 08:02:00 +01:00
AndreaCatania
d6e413bb9c Removed type_mask and fixed some variable name 2017-11-21 22:56:40 +01:00
Ferenc Arn
d28763a4c1 Rename Rect3 to AABB.
Fixes #12973.
2017-11-17 11:01:41 -05:00
Eric Rybicki
bd5df84199 Allow double-axis lock in RigidBody and KinematicBody 2017-11-10 22:33:54 +01:00
Juan Linietsky
19b1ff0fc5 Disabled filter clip by default and made it optional, fixes #12368, likely others too 2017-11-10 09:22:25 -03:00
Juan Linietsky
50a9bd4e23
Merge pull request #12713 from AndreaCatania/master
Rewritten kinematic system
2017-11-09 16:08:58 -03:00
Rémi Verschelde
0095d642c7
Merge pull request #11379 from m4nu3lf/feature/no_bias_overrotation
Avoid bias over rotation in contact resolution
2017-11-08 08:19:28 +01:00
AndreaCatania
10f879bf88 Rewritten kinematic system 2017-11-07 15:22:09 +01:00
Rémi Verschelde
cb3f594b14
Merge pull request #11249 from m4nu3lf/bugfix/get_euler
Fix inertia tensor update & Generic6DOFJoint & Simplify Basis::get_euler()
2017-10-31 23:03:01 +01:00
Rémi Verschelde
24b3733f3b
Merge pull request #10770 from RandomShaper/fix-joints
Fix joints collision exceptions, plus a bit more
2017-10-31 23:02:37 +01:00
Pedro J. Estébanez
7b12ae39f2 Rename RayCasts collision_layer to collision_mask
The point is that `RayCast`s are checked against objects' `collision_layer`(s), but they themselves are considered no to _belong_ to any layer. Therefore, the correct name for their property is `collision_mask`, rather than `collision_layer`.

Only renaming is needed since the behavior was already the right one, only that it wasn't matching what users would expect from the name and description of the property.

Fixes #7589, where it's also discussed.
2017-10-21 22:17:47 +02:00
Grosskopf
f8c7d32987 Added documentation for 3D Joints, the 2D Pin Joint, and the Physicsservers, also a minor bugfix in the 3D Pinjoint. 2017-10-14 22:17:26 +02:00
Rémi Verschelde
8e9b99fe59 Merge pull request #11702 from AndreaCatania/bodyDS
Added new API to get body direct state
2017-10-09 11:01:36 +02:00
AndreaCatania
4537977d6d Renamed fixed_process to physics_process 2017-09-30 16:19:07 +02:00
AndreaCatania
c56c67db39 Added new API to get body direct state 2017-09-29 17:33:30 +02:00
m4nu3lf
0cb8d3ccbf Fix wrong index in get_euler_xyz and wrong get_euler in G6DF Joint 2017-09-22 20:06:23 +01:00
m4nu3lf
d4452e3a65 Fix Inertia tensor update & Generic 6DOF Joint 2017-09-22 20:05:02 +01:00
letheed
5ad9be4c24 Rename pos to position in user facing methods and variables
Rename user facing methods and variables as well as the corresponding
C++ methods according to the folloming changes:

* pos -> position
* rot -> rotation
* loc -> location

C++ variables are left as is.
2017-09-20 13:11:10 +02:00
m4nu3lf
650d5630af Avoid bias overrotation in contact resolution 2017-09-18 18:31:58 +01:00
Wilson E. Alvarez
072e379ffe Renamed function arguments to keep them consistent between declaration and implementation 2017-09-14 13:49:15 -04:00
Rémi Verschelde
6ec9383706 Merge pull request #11125 from zavb074/master
Removed code that flips normal if facing away from test direction
2017-09-13 19:33:01 +02:00
Rémi Verschelde
aabbd00284 Merge pull request #10908 from hpvb/fix-unused-variables
Fix unused variable warnings
2017-09-12 12:55:53 +02:00
Pedro J. Estébanez
fbeb27b01d Remove joint freeing logic from physics servers
Since joint resources are created by joint nodes and also they take care of freeing them, the physics server doesn't need to free bodies' joints explicitly.

The logic for clearing the constraints map/set is still relevant as there may be collision pairs and in their case its the server itself the one creating them and therefore releasing them.
2017-09-09 21:45:22 +02:00
Lewis
b11e145ddc Removed code that flips normal if facing away from test direction 2017-09-09 20:08:35 +01:00
Hein-Pieter van Braam
b2a38854fd Fix unused variable warnings
The forth in my quest to make Godot 3.x compile with -Werror on GCC7
2017-09-08 15:03:53 +02:00
Hein-Pieter van Braam
67a706fc1b Fix various assorted warnings
Fix various warnings that don't have enough instances to merit
individual commits. Also fixes a potential bug in audio_server.cpp.
2017-09-08 14:57:48 +02:00
Juan Linietsky
adde89e8b1 -Added an optimization so physics shapes are configured later, speeds up grid map loading and editing 2017-09-03 14:54:15 -03:00