* Introduce new metadata keys `vcs.repo`, `vcs.kind` and `vcs.owner` to keep the keys generic for any vcs. Expanded the git SSH regex to account for bitbucket's .org domain.
* Introduce new stack tags keys with the same theme of detecting the vcs.
* Enable gzip compression on the wire
This change allows the Pulumi API client to gzip requests sent to the
Pulumi service if requested using the 'GzipCompress' http option.
This change also sets the Accept-Encoding: gzip header for all requests
originating from the CLI, indicating to the service that it is free to
gzip responses. The 'readBody' function is used in the API client to
read a response's body, regardless of how it is encoded.
Finally, this change sets GzipCompress: true on the
'PatchUpdateCheckpoint' API call, since JSON payloads in that call tend
to be large and it has become a performance bottleneck.
* spelling
* CR feedback:
1. Clarify and edit comments
2. Close the gzip.Reader when reading bodies
3. Log the payload size when logging compression ratios
Providers with unknown properties are currently considered to require
replacement. This was intended to indicate that we could not be sure
whether or not replacement was reqiuired. Unfortunately, this was not a
good user experience, as replacement would never be required at runtime.
This caused quite a bit of confusion--never proposing replacement seems
to be the better option.
The provider registry was checking for a `nil` provider instance before
checking for a non-nil error. This caused the CLI to fail to report
important errors during the plugin load process (e.g. invalid checkpoint
errors) and instead report a failure to find a matching plugin.
Some providers (namely Kubernetes) require unbounded parallelism in
order to function correctly. This commit enables the engine to operate
in a mode with unbounded parallelism and switches to that mode by
default.
* Add new 'pulumi state' command for editing state
This commit adds 'pulumi state unprotect' and 'pulumi state delete', two
commands that can be used to unprotect and delete resources from a
stack's state, respectively.
* Simplify LocateResource
* CR: Print yellow 'warning' before editing state
* Lots of CR feedback
* CR: Only delete protected resources when asked with --force
Last-minute events coming through the engine could cause the goroutine
iterating over engineEvents to write to displayEvents after it has
already been closed by the main goroutine.
Whenever an update fails partially, it gives the engine back some state
bag of outputs that should be persisted to the snapshot. When saving
this state, we shouldn't save the inputs that triggered the update that
failed, since the resource that exists will never have been updated
successfully with those inputs.
Instead of saving the new inputs on partial failed updates, this commit
saves the old inputs and the new outputs. The new outputs will likely
need to be refreshed to be useful, but the old inputs will be correct
from the perpsective of the Pulumi program that generated the last
successful update.
Fixespulumi/pulumi#2011
This adds an option, --suppress-outputs, to many commands, to
avoid printing stack outputs for stacks that might contain sensitive
information in their outputs (like key material, and whatnot).
Fixespulumi/pulumi#2028.
This change adds GitLab CI support, by sniffing out the right
variables (equivalent to what we already do for Travis).
I've also restructured the code to share more logic with our
existing CI detection code, now moved to the pkg/util/ciutil
package, and will be fleshing this out more in the days to come.
There is a seldom-used capability in our CLI, the ability to pass
-m to specify an update message, which we will then show prominently.
At the same time, we already scrape some interesting information from
the Git repo from which an update is performed, like the SHA hash,
committer, and author information. We explicitly didn't want to scrape
the entire message just in case someone put sensitive info inside of it.
It seems safe -- indeed, appealing -- to use just the title portion
as the default update message when no other has been provided (the
majority case). We'll work on displaying it in a better way, but this
strengthens our GitOps/CI/CD story.
Fixespulumi/pulumi#2008.
It's not good practice to dirty up the stdout stream with messages
like this. In fact, I questioned whether we should be emitting
*anything* here, but given that this is often used in unattended
environments, coupled with the fact that it's easy to accidentally set
this and then wonder why `pulumi login` is silently returning, led
me to keep it in (for now, at least).
The preview will proceed as if the operations had not been issued (i.e.
we will not speculate on a new state for the stack). This is consistent
with our behavior prior to the changes that added pending operations to
the checkpoint.
This change stops attempting to pop a web browser in non-interactive
sessions. Instead, the PULUMI_ACCESS_TOKEN environment variable must
be set. Otherwise, any attempt to use the CLI will yield
$ pulumi --non-interactive preview
error: PULUMI_ACCESS_TOKEN must be set for login during non-interactive CLI sessions
This is the behavior we want for Docker-based invocations of the CLI,
and so is part of pulumi/pulumi#1991.
The diff display code was not expecting that it would be possible for
resource properties to transition from being an archive to being an
asset, or the other way around. This commit prints out a reasonable diff
if this situation occurs instead of crashing.
* Process deletions conservatively in parallel
This commit allows the engine to conservatively delete resources in
parallel when it is sure that it is legal to do so. In the absence of a
true data-flow oriented step scheduler, this approach provides a
significant improvement over the existing serial deletion mechanism.
Instead of processing deletes serially, this commit will partition the
set of condemned resources into sets of resources that are known to be
legally deletable in parallel. The step executor will then execute those
independent lists of steps one-by-one until all steps are complete.
* CR: Make ResourceSet a normal map
* Only use the dependency graph if we can trust it
* Reverse polarity of pendingDeletesAreReplaces
* CR: un-export a few types
* CR: simplify control flow in step generator when scheduling
* CR: parents are dependencies, fix loop index
* CR: Remove ParentOf, add new test for parent dependencies
API calls agains the Pulumi service may start setting a new header,
`X-Pulumi-Warning`. The value of this header should be presented to
the user as a warning.
The Service will use this to provide additional information to the
user without having the CLI have to know about every specific warning
path.
Since I was digging around over the weekend after the change to move
away from light black, and the impact it had on less important
information showing more prominently than it used to, I took a step
back and did a deeper tidying up of things. Another side goal of this
exercise was to be a little more respectful of terminal width; when
we could say things with fewer words, I did so.
* Stylize the preview/update summary differently, so that it stands
out as a section. Also highlight the total changes with bold -- it
turns out this has a similar effect to the bright white colorization,
just without the negative effects on e.g. white terminals.
* Eliminate some verbosity in the phrasing of change summaries.
* Make all heading sections stylized consistently. This includes
the color (bright magenta) and the vertical spacing (always a newline
separating headings). We were previously inconsistent on this (e.g.,
outputs were under "---outputs---"). Now the headings are:
Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink.
* Fix an issue where we'd parent things to "global" until the stack
object later showed up. Now we'll simply mock up a stack resource.
* Don't show messages like "no change" or "unchanged". Prior to the
light black removal, these faded into the background of the terminal.
Now they just clutter up the display. Similar to the elision of "*"
for OpSames in a prior commit, just leave these out. Now anything
that's written is actually a meaningful status for the user to note.
* Don't show the "3 info messages," etc. summaries in the Info column
while an update is ongoing. Instead, just show the latest line. This
is more respectful of width -- I often find that the important
messages scroll off the right of my screen before this change.
For discussion:
- I actually wonder if we should eliminate the summary
altogether and always just show the latest line. Or even
blank it out. The summary feels better suited for the
Diagnostics section, and the Status concisely tells us
how a resource's update ended up (failed, succeeded, etc).
- Similarly, I question the idea of showing only the "worst"
message. I'd vote for always showing the latest, and again
leaving it to the Status column for concisely telling the
user about the final state a resource ended up in.
* Stop prepending "info: " to every stdout/stderr message. It adds
no value, clutters up the display, and worsens horizontal usage.
* Lessen the verbosity of update headline messages, so we now instead
of e.g. "Previewing update of stack 'x':", we just say
"Previewing update (x):".
* Eliminate vertical whitespace in the Diagnostics section. Every
independent console.out previously was separated by an entire newline,
which made the section look cluttered to my eyes. These are just
streams of logs, there's no reason for the extra newlines.
* Colorize the resource headers in the Diagnostic section light blue.
Note that this will change various test baselines, which I will
update next. I didn't want those in the same commit.
Now that we're showing SpecUnimportant as regular text, the extra
"Previewing"/"Updating" line that we show really stands out as being
superfluous. For example, we previously said:
Updating stack 'docker-images'
Performing changes:
...
This change eliminates that second line, so we just have:
Updating stack 'docker-images':
...
Recently, we eliminated bright black text, which IMHO makes the
"same" lines really stand out more than we want them to. This is
partly just due to the heavyweight nature of the "*" character,
which we precede every line with. This has the effect of making it
toughter to scan the update to see what's going to happen. The goal
of SpecUnimportant (bright black) was that we wanted to draw less
attention to certain elements of the CLI text -- and have them fade
into the background (apparently it was too successful at this ;-))
So, this change eliminates the "*" prefix for same operations
altogether. It reads better to my eyes and keeps the original intent.
- Attempting to read an archive with an unknown type now returns an
error
- Attempting to read a path archive that is neither a known archive
format or a directory now returns an error
Fixes#1529.
Fixes#1953.
Add two command-line options to the test framework, "-dirs" and
"list-dirs". The former accepts a regex that is used to select which
integration tests to run. The latter lists available integration tests
without running them.
* Protobuf changes
* Move management of root resource state to engine
This commit fixes a persistent side-by-side issue in the NodeJS SDK by
moving the management of root resource state to the engine. Doing so
adds two new endpoints to the Engine gRPC service: 1) GetRootResource
and 2) SetRootResource, which get and set the root resource
respectively.
* Rebase against master, regenerate proto
* Have backend.ListStacks return a new StackSummary interface
* Update filestake backend to use new type
* Update httpstate backend to use new type
* Update commands to use new type
* lint
* Address PR feedback
* Lint
In order to present a message with a link to a user's access tokens in
the service, we have to convert the API server's URL to the URL for
the console. We understand how to do this for servers that look like
our servers (i.e. their host name is `api.<whatever>`), but in general
we can't do this.
Rewrite the code such that we only print a message about how to find
your access tokens (and offer browser based login) only in cases where
we are able to construct a URL to the console.
Fixes#1930
* Revert "Don't show stack outputs when update fails (#1916)"
This reverts commit e3f89e82aa.
* Be more precise about printing outputs
This commit prints outputs only if they are known to be complete. This
avoids massive red diffs during previews and when component resources
fail to call registerResourceOutputs.
* CR: Clean up large boolean expression and comment
* CR: boolean compromise
