Adds a new resource option `aliases` which can be used to rename a resource. When making a breaking change to the name or type of a resource or component, the old name can be added to the list of `aliases` for a resource to ensure that existing resources will be migrated to the new name instead of being deleted and replaced with the new named resource.
There are two key places this change is implemented.
The first is the step generator in the engine. When computing whether there is an old version of a registered resource, we now take into account the aliases specified on the registered resource. That is, we first look up the resource by its new URN in the old state, and then by any aliases provided (in order). This can allow the resource to be matched as a (potential) update to an existing resource with a different URN.
The second is the core `Resource` constructor in the JavaScript (and soon Python) SDKs. This change ensures that when a parent resource is aliased, that all children implicitly inherit corresponding aliases. It is similar to how many other resource options are "inherited" implicitly from the parent.
Four specific scenarios are explicitly tested as part of this PR:
1. Renaming a resource
2. Adopting a resource into a component (as the owner of both component and consumption codebases)
3. Renaming a component instance (as the owner of the consumption codebase without changes to the component)
4. Changing the type of a component (as the owner of the component codebase without changes to the consumption codebase)
4. Combining (1) and (3) to make both changes to a resource at the same time
For provider plugins, the gRPC interfaces expect that a URN would be
included as part of the DiffConfig/CheckConfig request, which means we
need to flow this value into our Provider interface.
This change does that.
We have many cases where we want to do the following:
deployment -> snapshot -> process snapshot -> deployment
We now retain information in the snapshot about the secrets manager
that was used to construct it, so in these round trip cases, we can
re-use the existing manager.
A new `Secret` property value is introduced, and plumbed across the
engine.
- When Unmarshalling properties /from/ RPC calls, we instruct the
marshaller to retain secrets, since we now understand them in the
rest of the engine.
- When Marshalling properties /to/ RPC calls, we use or tracked data
to understand if the other side of the connection can accept
secrets. If they can, we marshall them in a similar manner to assets
where we have a special object with a signiture specific for secrets
and an underlying value (which is the /plaintext/ value). In cases
where the other end of the connection does not understand secrets,
we just drop the metadata and marshal the underlying value as we
normally would.
- Any secrets that are passed across the engine events boundary are
presently passed as just `[secret]`.
- When persisting secret values as part of a deployment, we use a rich
object so that we can track the value is a secret, but right now the
underlying value is not actually encrypted.
This command exposes a new resource `Invoke` operation,
`pulumi:pulumi:readStackResourceOutputs` which retrieves all resource
outputs for some user-specified stack, not including those deleted.
Fixes#2600.
`pulumi query` is designed, essentially, as a souped-up `exec`. We
execute a query program, and add a few convenience constructs (e.g., the
default providers that give you access to things like `getStack`).
Early in the design process, we decided to not re-use the `up`/update
path, both to minimize risk to update operations, and to simplify the
implementation.
This commit will add this "parallel query universe" into the engine
package. In particular, this includes:
* `QuerySource`, which executes the language provider running the query
program, and providing it with some simple constructs, such as the
default provider, which provides access to `getStack`. This is much
like a very simplified `EvalSource`, though notably without any of the
planning/step execution machinery.
* `queryResmon`, which disallows all resource operations, except the
`Invoke` that retrieves the resource outputs of some stack's last
snapshot. This is much like a simplified `resmon`, but without any of
the provider resolution, and without and support for resource
operations generally.
* Various static functions that pull together miscellaneous things
needed to execute a query program. Notably, this includes gathering
language plugins.
`pulumi query` needs to exec a query program in some directory, just as
`pulumi up` does. But, it won't use the planning/step execution
machinery at all. One small piece these two paths have in common is that
they both can use the `planResult#Chdir`. So, this commit will move this
to `fsutil` so they can both use it.
This change adds a --json flag to the preview command, enabling
basic JSON serialization of preview plans. This effectively flattens
the engine event stream into a preview structure that contains a list
of steps, diagnostics, and summary information. Each step contains
the deep serialization of resource state, in addition to metadata about
the step, such as what kind of operation it entails.
This is a partial implementation of pulumi/pulumi#2390. In particular,
we only support --json on the `preview` command itself, and not `up`,
meaning that it isn't possible to serialize the result of an actual
deployment yet (thereby limiting what you can do with outputs, etc).
Fixes#2277.
Adds a new ignoreChanges resource option that allows specifying a list of property names whose values will be ignored during updates. The property values will be used for Create, but will be ignored for purposes of updates, and as a result also cannot trigger replacements.
This is a feature of the Pulumi engine, not of the resource providers, so no new logic is needed in providers to support this feature. Instead, the engine simply replaces the values of input properties in the goal state with old inputs for properties marked as ignoreChanges.
Currently, only top level properties may be specified in ignoreChanges. In the future, this could be extended to support paths to nested properties (including into array elements) with a JSONPath/JMESPath syntax.
* Load specific provider versions if requested
As part of pulumi/pulumi#2389, we need the ability for language hosts to
tell the engine that a particular resource registration, read, or invoke
needs to use a particular version of a resource provider. This was not
previously possible before; the engine prior to this commit loaded
plugins from a default provider map, which was inferred for every
resource provider based on the contents of a user's package.json, and
was itself prone to bugs.
This PR adds the engine support needed for language hosts to request a
particular version of a provider. If this occurs, the source evaluator
specifically records the intent to load a provider with a given version
and produces a "default" provider registration that requests exactly
that version. This allows the source evaluator to produce multiple
default providers for a signle package, which was previously not
possible.
This is accomplished by having the source evaluator deal in the
"ProviderRequest" type, which is a tuple of version and package. A
request to load a provider whose version matches the package of a
previously loaded provider will re-use the existing default provider. If
the version was not previously loaded, a new default provider is
injected.
* CR Feedback: raise error if semver is invalid
* CR: call String() if you want a hash key
* Update pkg/resource/deploy/providers/provider.go
Co-Authored-By: swgillespie <sean@pulumi.com>
Fixes#2633.
Currently when a user runs `refresh` and a resource is in a state of
error, the `refresh` will fail and the resource state will not be
persisted. This can make it vastly harder to incrementally fix
infrastructure. The issue mentioned above explains more of the
historical context, as well as some specific failure modes.
This commit resolves this issue by causing refresh to *not* report an
error in this case, and instead to simply log a warning that the
`refresh` has recognized that the resource is in an unhealthy state
during state sync.
This commit switches from dep to Go 1.12 modules for tracking Pulumi
dependencies. Rather than _building_ using Go modules, we instead use the `go
mod vendor` command to populate a vendor tree in the same way as `dep ensure`
was previously doing.
In order to prevent checksum mismatches, it was necessary to also update CI to
use Go 1.12 instead of 1.11 - which also necessitated fixing some linting errors
which appeared with the upgraded golangci-lint for 1.12.
* Load default providers deterministically
This commit adds a new algorithm for deriving a list of default
providers from the set of plugins reported from the language host and
from the snapshot. If the language host reports a set of plugins,
default providers are sourced directly from that set, otherwise default
providers are sourced from the full set of plugins, including ones from
the snapshot.
When multiple versions of the same provider are requested, the newest
version of that provider is always select as the default provider.
* Add CHANGELOG.md entry
* Skip the language host's plugins if it reports no resource plugins
* CR feedback
* CR: Log when skipping non resource plugin
* Install missing plugins on startup
This commit addresses the problem of missing plugins by scanning the
snapshot and language host on startup for the list of required plugins
and, if there are any plugins that are required but not installed,
installs them. The mechanism by which plugins are installed is exactly
the same as 'pulumi plugin install'.
The installation of missing plugins is best-effort and, if it fails,
will not fail the update.
This commit addresses pulumi/pulumi-azure#200, where users using Pulumi
in CI often found themselves missing plugins.
* Add CHANGELOG
* Skip downloading plugins if no client provided
* Reduce excessive test output
* Update Gopkg.lock
* Update pkg/engine/destroy.go
Co-Authored-By: swgillespie <sean@pulumi.com>
* CR: make pluginSet a newtype
* CR: Assign loop induction var to local var
Various providers use properties that begin with "__" to represent
internal metadata that should not be presented to the user. These
changes look for such properties and elide them when displaying diffs.
These changes take advantage of the newly-added support for returning
inputs from Read to update a resource's inputs as part of a refresh.
As a consequence, the Pulumi engine will now properly detect drift
between the actual state of a resource and the desired state described
by the program and generate appropriate update or replace steps.
As part of these changes, a resource's old inputs are now passed to the
provider when performing a refresh. The provider can take advantage of
this to maintain the accuracy of any additional data or metadata in the
resource's inputs that may need to be updated during the refresh.
This is required for the complete implementation of
https://github.com/pulumi/pulumi-terraform/pull/349. Without access to
the old inputs for a resource, TF-based providers would lose all
information about default population during a refresh.
If a provider returns information about the top-level properties that
differ, use those keys to filter the diffs that are rendered to the
user.
Fixes#2453.
These changes add a new flag to the various `ResourceOptions` types that
indicates that a resource should be deleted before it is replaced, even
if the provider does not require this behavior. The usual
delete-before-replace cascade semantics apply.
Fixes#1620.
In general, a "delete" in Pulumi is destroying an actual physical
resource. In the case of a read resource, however, the delete is
merely removing the resource from the stack; the physical resource
is not affected. These changes attempt to clarify this situation by
using the term "discard" rather than "delete".
Fixes#2015.
This implements the new algorithm for deciding which resources must be
deleted due to a delete-before-replace operation.
We need to compute the set of resources that may be replaced by a
change to the resource under consideration. We do this by taking the
complete set of transitive dependents on the resource under
consideration and removing any resources that would not be replaced by
changes to their dependencies. We determine whether or not a resource
may be replaced by substituting unknowns for input properties that may
change due to deletion of the resources their value depends on and
calling the resource provider's Diff method.
This is perhaps clearer when described by example. Consider the
following dependency graph:
A
__|__
B C
| _|_
D E F
In this graph, all of B, C, D, E, and F transitively depend on A. It may
be the case, however, that changes to the specific properties of any of
those resources R that would occur if a resource on the path to A were
deleted and recreated may not cause R to be replaced. For example, the
edge from B to A may be a simple dependsOn edge such that a change to
B does not actually influence any of B's input properties. In that case,
neither B nor D would need to be deleted before A could be deleted.
In order to make the above algorithm a reality, the resource monitor
interface has been updated to include a map that associates an input
property key with the list of resources that input property depends on.
Older clients of the resource monitor will leave this map empty, in
which case all input properties will be treated as depending on all
dependencies of the resource. This is probably overly conservative, but
it is less conservative than what we currently implement, and is
certainly correct.
This test had been intermittently failing due to a race condition. Its
implementation of `plugin.Provider.Read` was intended to ensure that
the cancellation of a refresh operation occurred. As written, it was
only able to ensure that the cancellation was requested.
These changes ensure that cancellation has been acknowledged by the engine by
implementing providing an implementation for `plugin.Provider.Cancel`
that closes a channel on which the implementation of `Read` waits.
This ensures that the gRPC server is properly shut down. This fixes an
issue in which a resource plugin that is still configuring could report
log messages to the plugin host, which would in turn attempt to send
diagnostic packets over a closed channel, causing a panic.
Fixes#2170.
After #2088, we began calling `Diff` on providers that are not configured
due to unknown configuration values. This hit an assertion intended to
detect exactly this scenario, which was previously unexpected.
These changes adjust `Diff` to indicate that a Diff is unavailable and
return an error message that describes why. The step generator then
interprets the diff as indicating a normal update and issues the error
message to the diagnostic stream.
Fixes#2223.
These changes add a new resource to the Pulumi SDK,
`pulumi.StackReference`, that represents a reference to another stack.
This resource has an output property, `outputs`, that contains the
complete set of outputs for the referenced stack. The Pulumi account
performing the deployment that creates a `StackReference` must have
access to the referenced stack or the call will fail.
This resource is implemented by a builtin provider managed by the engine.
This provider will be used for any custom resources and invokes inside
the `pulumi:pulumi` module. Currently this provider supports only the
`pulumi:pulumi:StackReference` resource.
Fixes#109.
We run the same suite of changes that we did on gometalinter. This
ended up catching a few new issues, some of which were addressed and
some of which were baselined.
In preparation for some workspace restructuring, I decided to scratch a
few itches of my own in the code:
* Change project's RuntimeInfo field to just Runtime, to match the
serialized name in JSON/YAML.
* Eliminate the no-longer-used Context and NoDefaultIgnores fields on
project, and all of the associated legacy PPC-related code.
* Eliminate the no-longer-used IgnoreFile constant.
* Remove a bunch of "// nolint: lll" annotations, and simply format
the structures with comments on dedicated lines, to avoid overly
lengthy lines and lint suppressions.
* Mark Dependencies and InitErrors as `omitempty` in the JSON
serialization directives for CheckpointV2 files. This was done for
the YAML directives, but (presumably accidentally) omitted for JSON.
Whenever an update fails partially, it gives the engine back some state
bag of outputs that should be persisted to the snapshot. When saving
this state, we shouldn't save the inputs that triggered the update that
failed, since the resource that exists will never have been updated
successfully with those inputs.
Instead of saving the new inputs on partial failed updates, this commit
saves the old inputs and the new outputs. The new outputs will likely
need to be refreshed to be useful, but the old inputs will be correct
from the perpsective of the Pulumi program that generated the last
successful update.
Fixespulumi/pulumi#2011
The preview will proceed as if the operations had not been issued (i.e.
we will not speculate on a new state for the stack). This is consistent
with our behavior prior to the changes that added pending operations to
the checkpoint.
The diff display code was not expecting that it would be possible for
resource properties to transition from being an archive to being an
asset, or the other way around. This commit prints out a reasonable diff
if this situation occurs instead of crashing.
* Process deletions conservatively in parallel
This commit allows the engine to conservatively delete resources in
parallel when it is sure that it is legal to do so. In the absence of a
true data-flow oriented step scheduler, this approach provides a
significant improvement over the existing serial deletion mechanism.
Instead of processing deletes serially, this commit will partition the
set of condemned resources into sets of resources that are known to be
legally deletable in parallel. The step executor will then execute those
independent lists of steps one-by-one until all steps are complete.
* CR: Make ResourceSet a normal map
* Only use the dependency graph if we can trust it
* Reverse polarity of pendingDeletesAreReplaces
* CR: un-export a few types
* CR: simplify control flow in step generator when scheduling
* CR: parents are dependencies, fix loop index
* CR: Remove ParentOf, add new test for parent dependencies
Since I was digging around over the weekend after the change to move
away from light black, and the impact it had on less important
information showing more prominently than it used to, I took a step
back and did a deeper tidying up of things. Another side goal of this
exercise was to be a little more respectful of terminal width; when
we could say things with fewer words, I did so.
* Stylize the preview/update summary differently, so that it stands
out as a section. Also highlight the total changes with bold -- it
turns out this has a similar effect to the bright white colorization,
just without the negative effects on e.g. white terminals.
* Eliminate some verbosity in the phrasing of change summaries.
* Make all heading sections stylized consistently. This includes
the color (bright magenta) and the vertical spacing (always a newline
separating headings). We were previously inconsistent on this (e.g.,
outputs were under "---outputs---"). Now the headings are:
Previewing (etc), Diagnostics, Outputs, Resources, Duration, and Permalink.
* Fix an issue where we'd parent things to "global" until the stack
object later showed up. Now we'll simply mock up a stack resource.
* Don't show messages like "no change" or "unchanged". Prior to the
light black removal, these faded into the background of the terminal.
Now they just clutter up the display. Similar to the elision of "*"
for OpSames in a prior commit, just leave these out. Now anything
that's written is actually a meaningful status for the user to note.
* Don't show the "3 info messages," etc. summaries in the Info column
while an update is ongoing. Instead, just show the latest line. This
is more respectful of width -- I often find that the important
messages scroll off the right of my screen before this change.
For discussion:
- I actually wonder if we should eliminate the summary
altogether and always just show the latest line. Or even
blank it out. The summary feels better suited for the
Diagnostics section, and the Status concisely tells us
how a resource's update ended up (failed, succeeded, etc).
- Similarly, I question the idea of showing only the "worst"
message. I'd vote for always showing the latest, and again
leaving it to the Status column for concisely telling the
user about the final state a resource ended up in.
* Stop prepending "info: " to every stdout/stderr message. It adds
no value, clutters up the display, and worsens horizontal usage.
* Lessen the verbosity of update headline messages, so we now instead
of e.g. "Previewing update of stack 'x':", we just say
"Previewing update (x):".
* Eliminate vertical whitespace in the Diagnostics section. Every
independent console.out previously was separated by an entire newline,
which made the section look cluttered to my eyes. These are just
streams of logs, there's no reason for the extra newlines.
* Colorize the resource headers in the Diagnostic section light blue.
Note that this will change various test baselines, which I will
update next. I didn't want those in the same commit.
* Revert "Don't show stack outputs when update fails (#1916)"
This reverts commit e3f89e82aa.
* Be more precise about printing outputs
This commit prints outputs only if they are known to be complete. This
avoids massive red diffs during previews and when component resources
fail to call registerResourceOutputs.
* CR: Clean up large boolean expression and comment
* CR: boolean compromise
* Retire pending deletions at start of plan
Instead of letting pending deletions pile up to be retired at the end of
a plan, this commit eagerly disposes of any pending deletions that were
pending at the end of the previous plan. This is a nice usability win
and also reclaims an invariant that at most one resource with a given
URN is live and at most one is pending deletion at any point in time.
* Rebase against master
* Fix a test issue arising from shared snapshots
* CR feedback
* plan -> replacement
* Use ephemeral statuses to communicate deletions
We signal provider cancellation by hangning a goroutine off of the plan
executor's parent context. To ensure clean shutdown, this goroutine also
listens on a channel that closes once the plan has finished executing.
Unfortunately, we were closing this channel too early, and the close was
racing with the cancellation signal. These changes ensure that the
channel closes after the plan has fully completed.
Fixes#1906.
Fixespulumi/pulumi-kubernetes#185.
* Validate type tokens before using them
When registering or reading a resource, we take the type token given to
us from the language host and assume that it's valid, which resulted in
assertion failures in various places in the engine. This commit
validates the format of type tokens given to us from the language host
and issues an appropriate error if it's not valid.
Along the way, this commit also improves the way that fatal exceptions
are rendered in the Node language host.
* Pre-allocate an exception for ReadResource
* Fix integration test
* CR Feedback
This commit is a lower-impact change that fixes the bugs associated with
invalid types on component resources and only checks that a type is
valid on custom resources.
* CR Take 2: Fix up IsProviderType instead of fixing call sites
* Please gometalinter
This commit reverts most of #1853 and replaces it with functionally
identical logic, using the notion of status message-specific sinks.
In other words, where the original commit implemented ephemeral status
messages by adding an `isStatus` parameter to most of the logging
methdos in pulumi/pulumi, this implements ephemeral status messages as a
parallel logging sink, which emits _only_ ephemeral status messages.
The original commit message in that PR was:
> Allow log events to be marked "status" events
>
> This commit will introduce a field, IsStatus to LogRequest. A "status"
> logging event will be displayed in the Info column of the main
> display, but will not be printed out at the end, when resource
> operations complete.
>
> For example, for complex resource initialization, we'd like to display
> a series of intermediate results: [1/4] Service object created, for
> example. We'd like these to appear in the Info column, but not at the
> end, where they are not helpful to the user.
- Create all refresh steps before issuing any. This is important as the
state update loop expects all steps to exist.
- Check for cancellation later in the refresher.
This also fixes races in the SnapshotManager and the test journal that
could cause panics during cancellation.
This commit will greatly improve the experience of dealing with partial
failures by simply re-trying to initialize the relevant resources on
every subsequent `pulumi up`, instead of printing a list of reasons the
resource had previously failed to initialize.
As motivation, consider our behavior in the following common, painful
scenario:
* The user creates a `Service` and a `Deployment`.
* The `Pod`s in the `Deployment` fail to become live. This causes the
`Service` to fail, since it does not target any live `Pod`s.
* The user fixes the `Deployment`. A run of `pulumi up` sees the
`Pod`s successfully initialize.
* Users will expect that the `Service` is now in a state of success,
as the `Pod`s it targets are alive. But, because we don't update the
`Service` by default, it perpetually exists in a state of error.
* The user is now required to change some trivial feature of the
`Service` just to trigger an update, so that we can see it succeed.
There are many situations like this. Another very common one is waiting
for test `Pod`s that are meant to successfully complete when some object
becomes live.
By triggering an empty update step for all resources that have any
initialization errors, we avoid all problems like this.
This commit will implement this empty-update semantics for partial
failures, as well as fix the display UX to correctly render the diff in
these cases.
Replace the Source-based implementation of refresh with a phase that
runs as the first part of plan execution and rewrites the snapshot in-memory.
In order to fit neatly within the existing framework for resource operations,
these changes introduce a new kind of step, RefreshStep, to represent
refreshes. RefreshSteps operate similar to ReadSteps but do not imply that
the resource being read is not managed by Pulumi.
In addition to the refresh reimplementation, these changes incorporate those
from #1394 to run refresh in the integration test framework.
Fixes#1598.
Fixespulumi/pulumi-terraform#165.
Contributes to #1449.
* Show a better error message when decrypting fails
It is most often the case that failing to decrypt a secret implies that
the secret was transferred from one stack to another via copying the
configuration. This commit introduces a better error message for this
case and instructs users to explicitly re-encrypt their encrypted keys
in the context of the new stack.
* Spelling
* CR: Grammar fixes
These changes simplify a couple aspects of plan execution in the hopes of
clarifying some responsibilities and preparing the code for changes to the
implementation of refresh.
1. All aspects of plan execution are now managed by the plan executor,
which is no longer exported. Instead, it is abstracted behind
`Plan.Execute`.
2. The plan executor's error-handling and reporting have been unified
and simplified somewhat.
* Log errors coming from the language host
Similar to pulumi/pulumi#1762, fixespulumi/pulumi#1775. The language
host can fail without issuing any diagnostics and it is very unclear
what happens if the engine does not log the error.
* CR feedback
The plan executor assumed that the step generator was responsible for
logging its own diagnostics, which it sort-of is but also doesn't log a
majority of the diagnositcs that come out of it. This commit logs all
errors coming out of step generation so that we don't unintentionally
drop errors.
* Add a list of in-flight operations to the deployment
This commit augments 'DeploymentV2' with a list of operations that are
currently in flight. This information is used by the engine to keep
track of whether or not a particular deployment is in a valid state.
The SnapshotManager is responsible for inserting and removing operations
from the in-flight operation list. When the engine registers an intent
to perform an operation, SnapshotManager inserts an Operation into this
list and saves it to the snapshot. When an operation completes, the
SnapshotManager removes it from the snapshot. From this, the engine can
infer that if it ever sees a deployment with pending operations, the
Pulumi CLI must have crashed or otherwise abnormally terminated before
seeing whether or not an operation completed successfully.
To remedy this state, this commit also adds code to 'pulumi stack
import' that clears all pending operations from a deployment, as well as
code to plan generation that will reject any deployments that have
pending operations present.
At the CLI level, if we see that we are in a state where pending
operations were in-flight when the engine died, we'll issue a
human-friendly error message that indicates which resources are in a bad
state and how to recover their stack.
* CR: Multi-line string literals, renaming in-flight -> pending
* CR: Add enum to apitype for operation type, also name status -> type for clarity
* Fix the yaml type
* Fix missed renames
* Add implementation for lifecycle_test.go
* Rebase against master
Some time ago, we introduced the concept of the initialization error to
Pulumi (i.e., an error where the resource was successfully created but
failed to fully initialize). This was originally implemented in `Create`
and `Update` methods of the resource provider interface; when we
detected an initialization failure, we'd pack the live version of the
object into the error, and return that to the engine.
Omitted from this initial implementation was a similar semantics for
`Read`. There are many implications of this, but one of them is that a
`pulumi refresh` will erase any initialization errors that had
previously been observed, even if the initialization errors still exist
in the resource.
This commit will introduce the initialization error semantics to `Read`,
fixing this issue.
The belief is that this hides some complexity that we shouldn't be
exposing in the default case.
In order to filter these events from both the diff/progress display
and the resource change summary, we perform this filtering in
`pkg/engine`.
Fixes#1733.
* Emit reads for external resources when refreshing
Fixespulumi/pulumi#1744. This commit educates the refresh source about
external resources. If a refresh source encounters a resource with the
External bit set, it'll send a Read event to the engine and the engine
will process it accordingly.
* CR: save last event channel instead of last event, style fixes
* Serialize SourceEvents coming from the refresh source
The engine requires that a source event coming from a source be "ready
to execute" at the moment that it is sent to the engine. Since the
refresh source sent all goal states eagerly through its source iterator,
the engine assumed that it was legal to execute them all in parallel and
did so. This is a problem for the snapshot, since the snapshot expects
to be in an order that is a legal topological ordering of the dependency
DAG.
This PR fixes the issue by sending refresh source events one-at-a-time
through the refresh source iterator, only unblocking to send the next
step as soon as the previous step completes.
* Fix deadlock in refresh test
* Fix an issue where the engine "completed" steps too early
By signalling that a step is done before committing the step's results
to the snapshot, the engine was left with a race where dependent
resources could find themselves completely executed and committed before
a resource that they depend on has been committed.
Fixespulumi/pulumi#1726
* Fix an issue with Replace steps at the end of a plan
If the last step that was executed successfully was a Replace, we could
end up in a situation where we unintentionally left the snapshot
invalid.
* Add a test
* CR: pass context.Context as first parameter to Iterate
* CR: null->nil
When calculating deletes, we will only issue a single delete step for a
particular URN. This is incorrect in the presence of pending deletes
that share URNs with a live resource if the pending deletes follow the
live resource in the checkpoint: instead of issuing a delete for
every resource with a particular URN, we will only issue deletes for
the pending deletes.
Before first-class providers, this was mostly benigin: any remaining
resources could be deleted by re-running the destroy. With the
first-class provider changes, however, the provider for the undeleted
resources will be deleted, leaving the checkpoint in an invalid state.
These changes fix this issue by allowing the step generator to issue
multiple deletes for a single URN and add a test for this scenario.
### First-Class Providers
These changes implement support for first-class providers. First-class
providers are provider plugins that are exposed as resources via the
Pulumi programming model so that they may be explicitly and multiply
instantiated. Each instance of a provider resource may be configured
differently, and configuration parameters may be source from the
outputs of other resources.
### Provider Plugin Changes
In order to accommodate the need to verify and diff provider
configuration and configure providers without complete configuration
information, these changes adjust the high-level provider plugin
interface. Two new methods for validating a provider's configuration
and diffing changes to the same have been added (`CheckConfig` and
`DiffConfig`, respectively), and the type of the configuration bag
accepted by `Configure` has been changed to a `PropertyMap`.
These changes have not yet been reflected in the provider plugin gRPC
interface. We will do this in a set of follow-up changes. Until then,
these methods are implemented by adapters:
- `CheckConfig` validates that all configuration parameters are string
or unknown properties. This is necessary because existing plugins
only accept string-typed configuration values.
- `DiffConfig` either returns "never replace" if all configuration
values are known or "must replace" if any configuration value is
unknown. The justification for this behavior is given
[here](https://github.com/pulumi/pulumi/pull/1695/files#diff-a6cd5c7f337665f5bb22e92ca5f07537R106)
- `Configure` converts the config bag to a legacy config map and
configures the provider plugin if all config values are known. If any
config value is unknown, the underlying plugin is not configured and
the provider may only perform `Check`, `Read`, and `Invoke`, all of
which return empty results. We justify this behavior becuase it is
only possible during a preview and provides the best experience we
can manage with the existing gRPC interface.
### Resource Model Changes
Providers are now exposed as resources that participate in a stack's
dependency graph. Like other resources, they are explicitly created,
may have multiple instances, and may have dependencies on other
resources. Providers are referred to using provider references, which
are a combination of the provider's URN and its ID. This design
addresses the need during a preview to refer to providers that have not
yet been physically created and therefore have no ID.
All custom resources that are not themselves providers must specify a
single provider via a provider reference. The named provider will be
used to manage that resource's CRUD operations. If a resource's
provider reference changes, the resource must be replaced. Though its
URN is not present in the resource's dependency list, the provider
should be treated as a dependency of the resource when topologically
sorting the dependency graph.
Finally, `Invoke` operations must now specify a provider to use for the
invocation via a provider reference.
### Engine Changes
First-class providers support requires a few changes to the engine:
- The engine must have some way to map from provider references to
provider plugins. It must be possible to add providers from a stack's
checkpoint to this map and to register new/updated providers during
the execution of a plan in response to CRUD operations on provider
resources.
- In order to support updating existing stacks using existing Pulumi
programs that may not explicitly instantiate providers, the engine
must be able to manage the "default" providers for each package
referenced by a checkpoint or Pulumi program. The configuration for
a "default" provider is taken from the stack's configuration data.
The former need is addressed by adding a provider registry type that is
responsible for managing all of the plugins required by a plan. In
addition to loading plugins froma checkpoint and providing the ability
to map from a provider reference to a provider plugin, this type serves
as the provider plugin for providers themselves (i.e. it is the
"provider provider").
The latter need is solved via two relatively self-contained changes to
plan setup and the eval source.
During plan setup, the old checkpoint is scanned for custom resources
that do not have a provider reference in order to compute the set of
packages that require a default provider. Once this set has been
computed, the required default provider definitions are conjured and
prepended to the checkpoint's resource list. Each resource that
requires a default provider is then updated to refer to the default
provider for its package.
While an eval source is running, each custom resource registration,
resource read, and invoke that does not name a provider is trapped
before being returned by the source iterator. If no default provider
for the appropriate package has been registered, the eval source
synthesizes an appropriate registration, waits for it to complete, and
records the registered provider's reference. This reference is injected
into the original request, which is then processed as usual. If a
default provider was already registered, the recorded reference is
used and no new registration occurs.
### SDK Changes
These changes only expose first-class providers from the Node.JS SDK.
- A new abstract class, `ProviderResource`, can be subclassed and used
to instantiate first-class providers.
- A new field in `ResourceOptions`, `provider`, can be used to supply
a particular provider instance to manage a `CustomResource`'s CRUD
operations.
- A new type, `InvokeOptions`, can be used to specify options that
control the behavior of a call to `pulumi.runtime.invoke`. This type
includes a `provider` field that is analogous to
`ResourceOptions.provider`.
* Execute chains of steps in parallel
Fixespulumi/pulumi#1624. Since register resource steps are known to be
ready to execute the moment the engine sees them, we can effectively
parallelize all incoming step chains. This commit adds the machinery
necessary to do so - namely a step executor and a plan executor.
* Remove dead code
* CR: use atomic.Value to be explicit about what values are atomically loaded and stored
* CR: Initialize atomics to 'false'
* Add locks around data structures in event callbacks
* CR: Add DegreeOfParallelism method on Options and add comment on select in Execute
* CR: Use context.Context for cancellation instead of cancel.Source
* CR: improve cancellation
* Rebase against master: execute read steps in parallel
* Please gometalinter
* CR: Inline a few methods in stepExecutor
* CR: Feedback and bug fixes
1. Simplify step_executor.go by 'bubbling' up errors as far as possible
and reporting diagnostics and cancellation in one place
2. Fix a bug where the CLI claimed that a plan was cancelled even if it
wasn't (it just has an error)
* Comments
* CR: Add comment around problematic select, move workers.Add outside of goroutine, return instead of break
This change lets us set runtime specific options in Pulumi.yaml, which
will flow as arguments to the language hosts. We then teach the nodejs
host that when the `typescript` is set to `true` that it should load
ts-node before calling into user code. This allows using typescript
natively without an explicit compile step outside of Pulumi.
This works even when a tsconfig.json file is not present in the
application and should provide a nicer inner loop for folks writing
typescript (I'm pretty sure everyone has run into the "but I fixed
that bug! Why isn't it getting picked up? Oh, I forgot to run tsc"
problem.
Fixes#958
Fixes#1643.
When a resource fails to initialize (i.e., it is successfully created,
but fails to transition to a fully-initialized state), and a user
subsequently runs `pulumi update` without changing that resource, our
CLI will fail to warn the user that this resource is not initialized.
This commit resolves this issue.
This commit adds CLI support for resource providers to provide partial
state upon failure. For resource providers that model resource
operations across multiple API calls, the Provider RPC interface can now
accomodate saving bags of state for resource operations that failed.
This is a common pattern for Terraform-backed providers that try to do
post-creation steps on resource as part of Create or Update resource
operations.
This changes two things:
1) Eliminates the fact that we had two kinds of previews in our engine.
2) Always initialize the plugin.Events, to ensure that all plugin loads
are persisted no matter the update type (update, refresh, destroy),
and skip initializing it when dryRun == true, since we won't save them.
The PluginEvents will now try to register loaded plugins which,
during a refresh preview, will result in attempting to save mutations
when a token is missing. This change mirrors the changes made to
destroy which avoid it panicing similarly, by simply leaving
PluginEvents unset. Also adds a bit of tracing that was helpful to
me as I debugged through the underlying issues.
Fixes#1377.
In pulumi/pulumi#1356, we observed that we can fail during a destroy
because we attempt to load the language plugin, which now eagerly looks
for the @pulumi/pulumi package.
This is also blocking ingestion of the latest engine bits into the PPC.
It turns out that for destroy (and refresh), we have no need for the
language plugin. So, let's skip loading it when appropriate.
This changes the CLI interface in a few ways:
* `pulumi preview` is back! The alternative of saying
`pulumi update --preview` just felt awkward, and it's a common
operation to want to perform. Let's just make it work.
* There are two flags consistent across all update commands,
`update`, `refresh`, and `destroy`:
- `--skip-preview` will skip the preview step. Note that this
does *not* skip the prompt to confirm that you'd like to proceed.
Indeed, it will still prompt, with a little warning text about
the fact that the preview has been skipped.
* `--yes` will auto-approve the updates.
This lands us in a simpler and more intuitive spot for common scenarios.
I found the flag --force to be a strange name for skipping a preview,
since that name is usually reserved for operations that might be harmful
and yet you're coercing a tool to do it anyway, knowing there's a chance
you're going to shoot yourself in the foot.
I also found that what I almost always want in the situation where
--force was being used is to actually just run a preview and have the
confirmation auto-accepted. Going straight to --force isn't the right
thing in a CI scenario, where you actually want to run a preview first,
just to ensure there aren't any issues, before doing the update.
In a sense, there are four options here:
1. Run a preview, ask for confirmation, then do an update (the default).
2. Run a preview, auto-accept, and then do an update (the CI scenario).
3. Just run a preview with neither a confirmation nor an update (dry run).
4. Just do an update, without performing a preview beforehand (rare).
This change enables all four workflows in our CLI.
Rather than have an explosion of flags, we have a single flag,
--preview, which can specify the mode that we're operating in. The
following are the values which correlate to the above four modes:
1. "": default (no --preview specified)
2. "auto": auto-accept preview confirmation
3. "only": only run a preview, don't confirm or update
4. "skip": skip the preview altogether
As part of this change, I redid a bit of how the preview modes
were specified. Rather than booleans, which had some illegal
combinations, this change introduces a new enum type. Furthermore,
because the engine is wholly ignorant of these flags -- and only the
backend understands them -- it was confusing to me that
engine.UpdateOptions stored this flag, especially given that all
interesting engine options _also_ accepted a dryRun boolean. As of
this change, the backend.PreviewBehavior controls the preview options.
* Refactor the SnapshotManager interface
Lift snapshot management out of the engine by delegating it to the
SnapshotManager implementation in pkg/backend.
* Add a event interface for plugin loads and use that interface to record plugins in the snapshot
* Remove dead code
* Add comments to Events
* Add a number of tests for SnapshotManager
* CR feedback: use a successful bit on 'End' instead of having a separate 'Abort' API
* CR feedback
* CR feedback: register plugins one-at-a-time instead of the entire state at once
* Re-introduce interface for snapshot management
Snapshot management was done through the Update interface; this commit
splits it into a separate interface
* Put the SnapshotManager instance onto the engine context
* Remove SnapshotManager from planContext and updateActions now that it can be accessed by engine Context
Do not fire a "resource outputs" display event for component resources
after their initial registration. Instead, defer this event until the
component's `RegisterResourceOutputs` call arrives.
hese changes plumb basic support for cancellation through the engine.
Two types of cancellation are supported for all engine operations:
- Cancellation, which waits for the operation to drive itself to a safe
point before the operation returns, and
- Termination, which does not wait for the operation to drive itself
to a safe opint for the operation returns.
When updating local or managed stacks, a single ^C triggers cancellation
of any running operation; a second ^C will trigger termination.
Fixes#513, #1077.
This change implements a `pulumi refresh` command. It operates a bit
like `pulumi update`, and friends, in that it supports `--preview` and
`--diff`, along with the usual flags, and will update your checkpoint.
It works through substitution of the deploy.Source abstraction, which
generates a sequence of resource registration events. This new
deploy.RefreshSource takes in a prior checkpoint and will walk it,
refreshing the state via the associated resource providers by invoking
Read for each resource encountered, and merging the resulting state with
the prior checkpoint, to yield a new resource.Goal state. This state is
then fed through the engine in the usual ways with a few minor caveats:
namely, although the engine must generate steps for the logical
operations (permitting us to get nice summaries, progress, and diffs),
it mustn't actually carry them out because the state being imported
already reflects reality (a deleted resource has *already* been deleted,
so of course the engine need not perform the deletion). The diffing
logic also needs to know how to treat the case of refresh slightly
differently, because we are going to be diffing outputs and not inputs.
Note that support for managed stacks is not yet complete, since that
requires updates to the service to support a refresh endpoint. That
will be coming soon ...