Fix startup race of resizing ConPTY
- Depending on what the timing and ordering is of the message coming in
from the signal thread, it may be applied to the startup structure
after the I/O thread has begun initializing the console buffer
structures but before it has signaled that it is done and the signal
thread is ready to make changes directly. This likely happens because
the end of the I/O thread setup has a weird unlock/lock jog for the
input thread and the signal thread might have been scheduled in the
middle of it.
- My resolution here is to ensure that the signal thread just keeps
storing the latest resize message until it is told that everything is
initialized. Whomever comes in to tell the signal thread this
information (under lock) will pickup and run the resize if one came in
before everything was ready. This should resolve the race.
## Validation Steps Performed
- o-sdn-o confirms this resolves their issue
Closes#10400
Add flag that will ensure we do not handoff to a registered default console. Also for a bonus, allow double-click launches or explicit command line launches of conhost.exe with a binary argument to open with the inbox one.
## PR Checklist
* [x] Closes#9791
* [x] I work here
* [x] Tests added/passed
## Validation Steps Performed
* [x] Automated tests for parsing
* [x] Enable defapp, double click conhost.exe, opens as itself
* [x] Enable defapp, run conhost.exe runbox, opens as itself
* [x] Enable defapp, run conhost.exe powershell.exe runbox, opens as itself
* [x] Runbox cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Shortcut to cmd.exe/pwsh.exe trigger defapp handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle triggers handoff to Terminal
* [x] Use CHOP tool to launch conhost with a server handle and -ForceNoHandoff opens as itself
- Implements the default application behavior and handoff mechanisms
between console and terminal. The inbox portion is done already. This
adds the ability for our OpenConsole.exe to accept the incoming server
connection from the Windows OS, stand up a PTY session, start the
Windows Terminal as a listener for an incoming connection, and then
send it the incoming PTY connection for it to launch a tab.
- The tab is launched with default settings at the moment.
- You must configure the default application using the `conhost.exe`
propsheet or with the registry keys. Finishing the setting inside
Windows Terminal will be a todo after this is complete. The OS
Settings panel work to surface this setting is a dependency delivered
by another team and you will not see it here.
## Validation Steps Performed
- [x] Manual adjust of registry keys to the delegation conhost/terminal
behavior
- [x] Adjustment of the delegation options with the propsheet
- [x] Launching things from the run box manually and watching them show
in Terminal
- [x] Launching things from shortcuts and watching them show in the
Terminal
Documentation on how it works will be a TODO post completion in #9462
References #7414 - Default Terminal spec
Closes#492
Adds support for `win32-input-mode` to conhost, conpty, and the Windows
Terminal.
* The shared `terminalInput` class supports sending these sequences when
a VT client application requests this mode.
* ConPTY supports synthesizing `INPUT_RECORD`s from the input sent to it
from a terminal
* ConPTY requests this mode immediately on startup (if started with a
new flag, `PSEUDOCONSOLE_WIN32_INPUT_MODE`)
* The Terminal now supports sending this input as well, when conpty asks
for it.
Also adds a new ConPTY flag `PSEUDOCONSOLE_WIN32_INPUT_MODE` which
requests this functionality from conpty, and the Terminal requests this
by default.
Also adds `experimental.input.forceVT` as a global setting to let a user
opt-out of this behavior, if they don't want it / this ends up breaking
horribly.
## Validation Steps Performed
* played with this mode in vtpipeterm
* played with this mode in Terminal
* checked a bunch of scenarios, as outlined in a [comment] on #4999
[comment]: https://github.com/microsoft/terminal/issues/4999#issuecomment-628718631
References #4999: The megathread
References #5887: The spec
Closes#879Closes#2865Closes#530Closes#3079Closes#1119Closes#1694Closes#3608Closes#4334Closes#4446
This PR adds support for "Resize with Reflow" to the Terminal. In
conhost, `ResizeWithReflow` is the function that's responsible for
reflowing wrapped lines of text as the buffer gets resized. Now that
#4415 has merged, we can also implement this in the Terminal. Now, when
the Terminal is resized, it will reflow the lines of it's buffer in the
same way that conhost does. This means, the terminal will no longer chop
off the ends of lines as the buffer is too small to represent them.
As a happy side effect of this PR, it also fixed#3490. This was a bug
that plagued me during the investigation into this functionality. The
original #3490 PR, #4354, tried to fix this bug with some heavy conpty
changes. Turns out, that only made things worse, and far more
complicated. When I really got to thinking about it, I realized "conhost
can handle this right, why can't the Terminal?". Turns out, by adding
resize with reflow, I was also able to fix this at the same time.
Conhost does a little bit of math after reflowing to attempt to keep the
viewport in the same relative place after a reflow. By re-using that
logic in the Terminal, I was able to fix#3490.
I also included that big ole test from #3490, because everyone likes
adding 60 test cases in a PR.
## References
* #4200 - this scenario
* #405/#4415 - conpty emits wrapped lines, which was needed for this PR
* #4403 - delayed EOL wrapping via conpty, which was also needed for
this
* #4354 - we don't speak of this PR anymore
## PR Checklist
* [x] Closes#1465
* [x] Closes#3490
* [x] Closes#4771
* [x] Tests added/passed
## EDIT: Changes to this PR on 5 March 2020
I learned more since my original version of this PR. I wrote that in
January, and despite my notes that say it was totally working, it
_really_ wasn't.
Part of the hard problem, as mentioned in #3490, is that the Terminal
might request a resize to (W, H-1), and while conpty is preparing that
frame, or before the terminal has received that frame, the Terminal
resizes to (W, H-2). Now, there aren't enough lines in the terminal
buffer to catch all the lines that conpty is about to emit. When that
happens, lines get duplicated in the buffer. From a UX perspective, this
certainly looks a lot worse than a couple lost lines. It looks like
utter chaos.
So I've introduced a new mode to conpty to try and counteract this
behavior. This behavior I'm calling "quirky resize". The **TL;DR** of
quirky resize mode is that conpty won't emit the entire buffer on a
resize, and will trust that the terminal is prepared to reflow it's
buffer on it's own.
This will enable the quirky resize behavior for applications that are
prepared for it. The "quirky resize" is "don't `InvalidateAll` when the
terminal resizes". This is added as a quirk as to not regress other
terminal applications that aren't prepared for this behavior
(gnome-terminal, conhost in particular). For those kinds of terminals,
when the buffer is resized, it's just going to lose lines. That's what
currently happens for them.
When the quirk is enabled, conpty won't repaint the entire buffer. This
gets around the "duplicated lines" issue that requesting multiple
resizes in a row can cause. However, for these terminals that are
unprepared, the conpty cursor might end up in the wrong position after a
quirky resize.
The case in point is maximizing the terminal. For maximizing
(height->50) from a buffer that's 30 lines tall, with the cursor on
y=30, this is what happens:
* With the quirk disabled, conpty reprints the entire buffer. This is
60 lines that get printed. This ends up blowing away about 20 lines
of scrollback history, as the terminal app would have tried to keep
the text pinned to the bottom of the window. The term. app moved the
viewport up 20 lines, and then the 50 lines of conpty output (30
lines of text, and 20 blank lines at the bottom) overwrote the lines
from the scrollback. This is bad, but not immediately obvious, and
is **what currently happens**.
* With the quirk enabled, conpty doesn't emit any lines, but the
actual content of the window is still only in the top 30 lines.
However, the terminal app has still moved 20 lines down from the
scrollback back into the viewport. So the terminal's cursor is at
y=50 now, but conpty's is at 30. This means that the terminal and
conpty are out of sync, and there's not a good way of re-syncing
these. It's very possible (trivial in `powershell`) that the new
output will jump up to y=30 override the existing output in the
terminal buffer.
The Windows Terminal is already prepared for this quirky behavior, so it
doesn't keep the output at the bottom of the window. It shifts it's
viewport down to match what conpty things the buffer looks like.
What happens when we have passthrough mode and WT is like "I would like
quirky resize"? I guess things will just work fine, cause there won't be
a buffer behind the passthrough app that the terminal cares about. Sure,
in the passthrough case the Terminal could _not_ quirky resize, but the
quirky resize won't be wrong.
Generated by https://github.com/jsoref/spelling `f`; to maintain your repo, please consider `fchurn`
I generally try to ignore upstream bits. I've accidentally included some items from the `deps/` directory. I expect someone will give me a list of items to drop, I'm happy to drop whole files/directories, or to split the PR into multiple items (E.g. comments/locals/public).
Closes#4294
## Summary of the Pull Request
#4354 is a pretty complicated PR. It's got a bunch of conpty changes, but what it also has was some critical improvements to the roundtrip test suite. I'm working on some other bugfixes in the same area currently, and need these tests enhancements in those branches _now_. The rest of #4354 is complex enough that I don't trust it will get merged soon (if ever). However, these fixes _should_ be in regardless.
## PR Checklist
* [x] Taken directly from #4354
* [x] I work here
* [x] Tests added/passed
* [n/a] Requires documentation to be updated
## Detailed Description of the Pull Request / Additional comments
This is four main changes:
* Enable conpty to be fully enabled in unittests. Just setting up a VT renderer isn't enough to trick the host into being in conpty mode - it also needs to have some other flags set.
* Some minor changes to `CommonState` to better configure the common test state for conpty
* Move some of the verify helpers from `ConptyRoundtripTests` into their own helper class, to be shared in multiple tests
* Add a `TerminalBufferTests` class, for testing the Terminal buffer directly (without conpty).
This change is really easier than
would suggest, I promise.
