As pointed out by Faless, a do{ } while(0) wrapper around a continue or
break just ends the do{ } while(0) loop. The do{ } while(0) loop exists
to enable the macro to be used as a function which requires a semicolon.
The alternative approach is to use an if(1) { } else ((void)0) wrapper.
Since the macro already has an if(unlikely(m_cond)) { } this patch simply
adds the else ((void)0) to this if statement instead.
For consistency all the macros have been updated in the same way, and
trailing else warnings corrected. However, the wrappers around ERR_PRINT
and WARN_PRINT were removed, because they generated too many ambiguous
trailing else warnings. They are also single line macros so a wrapper is
not needed.
af9bb0ea15 fixed AudioServer's
`get_output_delay()` (which used to always return 0) while renaming it
to `get_output_latency()`. It now returns the latency from the
AudioDriver, which can be non-0.
While this was a clear bugfix, it broke playback for WebM files without
audio track. It seems like the playback code, even though it queried
the output delay to calculate a time compensation, was designed to work
even though the delay value was actually bogus. Now that it's correct,
it's not working.
As a workaround we comment out uses of the output latency, restoring
the behavior of Godot 3.1.
This code should still be reviewed by someone more versed in video
playback and fixed to properly account for the non-0 driver latency.
Fixes#35760.
We already had `MODULE_*_ENABLED` defines but only in the modules
environment, and a few custom `*_ENABLED` defines in the main env
when we needed the information in core.
Now this is defined in a single header which can be included in the
files that need this information.
An error message is now printed when trying to set the number of octaves
above the maximum allowed value.
The magic constant was also replaced with a define that can be
easily changed.
This closes#28714.
This should greatly decrease latency for the most common use cases.
A new function WebSocketPeer::set_no_delay will allow to configure it if
so desired.
We already removed it from the online docs with #35132.
Currently it can only be "Built-In Types" (Variant types) or "Core"
(everything else), which is of limited use.
We might also want to consider dropping it from `ClassDB` altogether
in Godot 4.0.
The code was attempting to dynamic cast the native instance to Reference after
the managed instance was disposed. As the managed instance acts as a Ref,
the native instance was freed during that disposal.
This made the dynamic cast fail and we attempted to memdelete a second time.
The fix is to make the dynamic cast before disposal.
Because of the weird case with multi-threading and ResourceLoader, it can be the case that a resource is GCed while being referenced again in the main thread. In such cases, a new unsafe reference is created before the finalizer thread removes the previous one.
- Add some missing descriptions.
- Add links to tutorials for ARVR and AnimationTree.
- Style fixes.
- Engine changes:
* Make `AnimationNodeTransition.input_<number>` properties internal
so that they don't appear in the docs. They still appear in the
inspector based on the actual number of inputs requested.
* Drop unimplemented `CPUParticles.flatness`. It's only used for 3D
particles in `ParticlesMaterial`, and thus only relevant for
`CPUParticles3D`.
As our script class parser is error prone, we should not impede the build from continuing because of a parsing error.
This should be reverted in the future once we switch to Roslyn.
Icons are no longer upsampled when using an integer editor scale.
This makes some icons slightly less crisp, but the icons themselves
can be adjusted to mitigate this. When using a non-integer editor
scale setting, upsampling is kept as it improves crispness in a
far more visible manner.
When upsampling is disabled, this speeds up the theme generation
by about 100 ms on average, making the project manager and editor
start slightly faster. This also speeds up switching between themes.
- `EditorNavigationMeshGenerator` was being registered as part of the Core API,
even after d3f48f88bb. We must make sure to
set Editor as the current ClassDB API type before creating an instance.
- The `VisualScriptEngineSingleton.constant` property has a property hint string
that's different between tools and non-tools builds. This commit makes the
hint string to no longer be set in `_bind_methods`, and to instead set it in
`_validate_property`. This way it's ignored when calculating the API hash.
- `JavaClassWrapper` is now registered in ClassDB on all platforms,
using a dummy implementation on platforms other than Android.
This fixes API portability between Android and other platforms.
- Updated `--class-db-json` command to ignore non-virtual methods that start
with an underscore (see: 4be87c6016).
lookup was always done on top level script instead of advancing to subclass each time.
this commit changes the lookup to always be at last found subclass
Fixes as issue where a subclass calls a base class method that tries to access a constant from the script.
The original code went through every ower class, and for each owner, went through its inheritance tree.
This seems like the wrong order, the modified code goes to each base class, and for each base class goes through the owner tree.
This is more in line with what the parser does, as the current impelemtation allows an access that the parser does not support.
This change should not negatively affect existing code due to the way the parser works
Added guards to all C# script interface calls to attach the current thread
for the current scope if the thread is not already attached.
This is far from ideal, as attaching the thread is not cheap and all managed
thread local storage is lost when we detach the thread at the end of the calls.
However, it's the best we can do for now to avoid crashing
when an unattached thread tries to interact with C# code.
* Add bind_ip property to WebSocketServer defaulting to "*" (listen to everyone)
* Set default for GDscript Language Server to listen only to localhost
Fixes potential security issue with GDScript language server being exposed to the
broad net by default.
Since it is the server which primary usage is to provide utility to the local
editor there is no need to expose it.
Needed because otherwise the certain type operations (such as type
casting) used as a function argument might become unresolved on release,
causing a compilation failure.
Fix#28680
This function is available to GDScript but not to GDNative. When exposed, it
allows building more ergonomic safe abstractions over the GDNative APIs, and
covers the use cases of the original PR.
Close#28478. Supersedes #28791.
Co-authored-by: Markus Ewald <cygon@nuclex.org>
Avoids crashes on debug mode. Instead it now breaks the execution and
show the error in-editor. Will still crash on release.
Also add a similar check to Marshalls to ensure the debugger doesn't
crash when trying to serialize the invalid instance.
Pass the calculated index from the stack and use the same to get and set
the value. This avoids a function with side effects being evaluated
twice when using indexing in an assignment with operation statement
(e.g. a[function()] += 1).
Properly sets the type of the identifier for the local variable
that is stored in the assignment operation. This makes sure that the
compiler is aware of typing for local variables when they are
initialized with the declaration.
Commit 4d727f1ee6 made it possible for vararg
methods to return void. This broke the C# bindings generator which was
assuming in one place that vararg methods always return Variant.
Up until now, 'GD.Print' would convert parameters first to
Variant and only then to String. This meant parameters that cannot be
converted to Variant would be printed as "Null".
This commit makes 'GD.Print' fallback to 'System.Object.ToString()'
if the parameter could not be converted to Variant.
The same applies to all 'GD.Print' variants:
'GD.PrintS', 'GD.PrintT', 'GD.PrintErr' and 'GD.PrintRaw'.
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
Previously we had a placeholder solution called 'Managed' to benefit from
tooling while editing the a part of the C# API.
Later the bindings generator would create the final 'GodotSharp' solution
including these C# files as well as the auto-generated C# API.
Now we replaced the 'Managed' solution with the final 'GodotSharp' solution
which is no longer auto-generated, and the bindings generator only takes
care of the auto-generated C# API.
This has the following benefits:
- It's less confusing as there will no longer be two versions of the same file
(the original and a generated copy of it). Now there's only one.
- We no longer need placeholder for auto-generated API classes, like Node or
Resource. We used them for benefiting from tooling. Now we can just use the
auto-generated API itself.
- Simplifies the build system and bindings generator. Removed lot of code
that is not needed anymore.
Also added a post-build target to the GodotTools project to copy the output to
the data dir. This makes it easy to iterate when doing changes to GodotTools,
as SCons doesn't have to be executed anymore just to copy these new files.
MSBuild on Windows uses the system .NET Framework BCL instead of Mono's. Because
of this, it may not be able to find the Mono.Posix assembly, so it's better
not to depend on it. We needed Mono.Posix to call Syscall.access, so we can
replace this with an internal call that does the same in C++.
* "Add" button text in Groups Editor
* "Receiver Method" in Connect Signal Dialog
* "Play Mode" in Animation State Machine Editor
* "Mesh Library" button text in Mesh Library editor plugin
* Compose Array node button texts in Visual Script
* Various button texts in TileSet Editor
* Various Run Script errors
Up until now debug builds would always wait up to 500 ms during initialization
to give time for debuggers to attach to the game.
We no longer want this as it increases startup time unnecesarily.
The way forward is to setup the debugger agent as client instead of server.
This way it's the game that connect to the debugger, not the other way around.
If server mode is still desired, suspend=y can be used to indefinitely wait
for the debugger to attach. This all can be specified with the environment
variable 'GODOT_MONO_DEBUGGER_AGENT' when launching the game.
`Variant::operator String()` returns "Null" if the type is `Variant:NIL`.
We must consider that and return a null `MonoString*` instead when marshalling.
This was also causing a "Null" error to be displayed when exporting a game
because null string members would be set to "Null" during hot-reload.
d09193b08a introduced a regression in
StringExtensions.FindLast. StringExtensions.GetFile was also affected as it
relies on FindLast. This in turn broke the project exporter as it uses GetFile.
The cause of the regression is that now FindLast is calling LastIndexOf
with 'startIndex: 0'. This should be 'startIndex: str.Length - 1' instead.
Also fixed another regression in the project exporter:
de7c2ad21b moved 'GodotTools/GodotSharpExport.cs'
to 'GodotTools/Export/ExportPlugin.cs' and in doing so accidently reverted
the changes from commit e439581198.
This appears to be necessary for current official builds cross-compiled
with MinGW from Linux, using Mono 6.6.0.160.
Follow-up to #31784, see #29812 for details.
