I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
- Renamed option to `builtin_vulkan`, since that's the name of the
library and if we were to add new components, we'd likely use that
same option.
- Merge `vulkan_loader/SCsub` in `vulkan/SCsub`.
- Accordingly, don't use built-in Vulkan headers when not building
against the built-in loader library.
- Drop Vulkan registry which we don't appear to need currently.
- Style and permission fixes.
-Texture renamed to Texture2D
-TextureLayered as base now inherits 2Darray, cubemap and cubemap array
-Removed all references to flags in textures (they will go in the shader)
-Texture3D gone for now (will come back later done properly)
-Create base rasterizer for RenderDevice, RasterizerRD
Add check to prevent compositor sync if the graphics driver is forcing vsync.
Fixes#35038.
(Addendum: this PR does not negatively impact users unaffected by #35038.)
Unify pack file version and magic to avoid hardcoded literals.
`version.py` now always includes `patch` even for the first release in
a new stable branch (e.g. 3.2). The public name stays without the patch
number, but `Engine.get_version_info()` already included `patch == 0`,
and we can remove some extra handling of undefined `VERSION_PATCH` this
way.
Co-authored-by: Rémi Verschelde <rverschelde@gmail.com>
Happy new year to the wonderful Godot community!
We're starting a new decade with a well-established, non-profit, free
and open source game engine, and tons of further improvements in the
pipeline from hundreds of contributors.
Godot will keep getting better, and we're looking forward to all the
games that the community will keep developing and releasing with it.
The new 'split_libmodules=yes' option is useful to work around linker
command line size limitations when linking a huge number of objects.
We're currently over 64k chars when linking libmodules.a on Windows
with MinGW, which triggers issues as seen in #30892.
Even on Linux, we can also reach linker command line size limitations
by adding more custom modules.
We force this option to True for MinGW on Windows, which fixes#30892.
Additional changes to lib splitting:
- Fix linking of the split module libs with interdependent symbols,
hacking our way into LINKCOM and SHLINKCOM to set the `--start-group`
and `--end-group` flags.
- Fix Python 3 compatibility in `methods.split_lib()`.
- Drop seemingly obsolete condition for 'msys' on 'posix'.
- Drop the unnecessary 'split_drivers' as the drivers lib is no longer
too big since we moved all thirdparty builds to modules.
Co-authored-by: Hein-Pieter van Braam-Stewart <hp@tmm.cx>
This makes it possible to know whether the window is focused
at a given time, without having to track the focus state manually
using `NOTIFICATION_WM_FOCUS_IN` and `NOTIFICATION_WM_FOCUS_OUT`.
This partially addresses #33928.
WM_MOUSEWHEEL and WM_MOUSEHWHEEL report mouse coordinates relative to
the screen (see lParam in [1]), rather than to the window like the rest
of the mouse events.
The current code already makes adjustments to take that into account.
However, it only makes the adjustments if the mouse is not captured, and
the coordinates are always relative to the screen regardless of whether
the mouse is captured or not, so let's fix the code to always
consistently apply the adjustments.
This fixes#29559.
[1] - https://docs.microsoft.com/en-us/windows/win32/inputdev/wm-mousewheel
Currently, the console appears when running OS.execute in an exported project,
but not in the editor. This change prevents it from appearing in either.
Only affects console applications.
The basic point is as in 2.1 (appending the PCK into the executable), but this implementation also patches a dedicated section in the ELF/PE executable so that it matches the appended data perfectly.
The usage of integer types is simplified in existing code; namely, using plain `int` for small quantities.
It's the recommended way to set those, and is more portable
(automatically prepends -D for GCC/Clang and /D for MSVC).
We still use CPPFLAGS for some pre-processor flags which are not
defines.
