A new `env.Run` method is added which allows to control the verbosity
of builders output automatically depending on whether the "verbose"
option is set. It also allows to optionally run any SCons commands in a
subprocess using the existing `run_in_subprocess` method, unifying
the interface. `Action` objects wrap all builder functions to include a
short build message associated with any action.
Notably, this removes quite verbose output generated by `make_doc_header`
and `make_editor_icons_action` builders.
- Enhance directory API
- Fix `FileAccess::exists()` not checking for PackedData being disabled
- Fix moving to the parent directory (`..`)
- Allow absolute paths in existence checks
The input to smoothstep is not actually a weight, and the decscription
of smoothstep was pretty hard to understand and easy to misinterpret.
Clarified what it means to be approximately equal.
nearest_po2 does not do what the descriptions says it does. For one,
it returns the same power if the input is a power of 2. Second, it
returns 0 if the input is negative or 0, while the smallest possible
integral power of 2 actually is 1 (2^0 = 1). Due to the implementation
and how it is used in a lot of places, it does not seem wise to change
such a core function however, and I decided it is better to alter the
description of the built-in.
Added a few examples/clarifications/edge-cases.
In general they are more confusing to users because they expect
inheritance to fully override parent methods. This behavior can be
enabled by script writers using a simple super() call.
Implements exit codes into the engine so tests can return their statuses.
Ideally we don't do this, and we use FIXUP logic to 'begin' and 'end' the engine execution for tests specifically.
Since realistically we're initialising the engine here we don't want to do that, since String should not require an engine startup to test a single header.
This lowers the complexity of running the unit tests and even for
physics should be possible to implement such a fix.
UDPServer now uses a single socket which is shared with the
PacketPeerUDP it creates and has a new `poll` function to read incoming
packets on that socket and delivers them to the appropriate peer.
PacketPeerUDP created this way never reads from the socket, but are
allowed to write on it using sendto.
This is needed because Windows (unlike Linux/BSD) does not support
packet routing when multiple sockets are bound on the same address/port.
- Extacted all syntax highlighting code from text edit
- Removed enable syntax highlighting from text edit
- Added line_edited_from signal to text_edit
- Renamed get/set_syntax_highlighting to get/set_syntax_highlighter
- Added EditorSyntaxHighligher
- Use the `.log` file extension (recognized on Windows out of the box)
to better hint that generated files are logs. Some editors provide
dedicated syntax highlighting for those files.
- Use an underscore to separate the basename from the date and
the date from the time in log filenames. This makes the filename
easier to read.
- Keep only 5 log files by default to decrease disk usage in case
messages are spammed.
So places that need to look into it can use the list instead of parsing
ProjectSettings details (like checking "*" in path for testing if it's
singleton).
Fix errors when comparing strings with large numbers (> INT64_MAX).
Comparisons now occur by comparing individual digits, instead of
converting to int64_t first.
Current error checks for to_int and to_int64 do not issue overflow error
messages for INT64_MAX + 1, INT64_MAX + 2, and other numbers close to the
integer limits. Likewise, error checks for hex_to_int, hex_to_int64 and
bin_to_int64 issue false positive error messages for INT64_MIN or INT32_MIN.
This commit fixes these error checks.
This change makes the behavior consistent when the value
is not found between erasing from an empty list
(no error, just returning false) and erasing from a non-empty list
(previously displaying triggering an error and returning false).
Error message previously triggered:
ERROR: erase: Condition ' !p_I ' is true. returned: false
At: ./core/list.h:157.
Custom monitors can be added/removed/checked using `Performance.add_custom_monitor`/`Performance.remove_custom_monitor`/`Performance.has_custom_monitor`
The value can be viewed in the `Monitor` tab of Debugger.
Text before `/` is used to categorize the custom monitor.
`EditorPerformanceProfiler` class is created to separate logic from `ScriptEditorDebugger`
User can click on the graph of monitors to read the value at that point.
Graph includes intermediate base lines.
Fix calculation for negative times to ensure Sundays are wrapped around to '0'
instead of '7', making it consistent with the output for positive times.
- Fixed floating point issue on the old one.
- Fixed the equation on the get_euler_yxz function.
- Added unit tests.
This work has been kindly sponsored by IMVU.
Fixes#36372 as Path2D/Path3D's `curve` property no longer uses a Curve
instance as default value, but instead it gets a (unique) default Curve
instance when created through the editor (CreateDialog).
ClassDB gets a sanity check to ensure that we don't do the same mistake
for other properties in the future, but instead use the dedicated
property usage hint.
Fixes#36372.
Fixes#36650.
Supersedes #36644 and #36656.
Co-authored-by: Thakee Nathees <thakeenathees@gmail.com>
Co-authored-by: simpuid <utkarsh.email@yahoo.com>
Note:
Casting to the C++ classes and calling the methods there would work as well,
but would require including he header files for the specific object types handled
here, which wouldn't be OK either.
Each time `r_err_str` is set, we should return a parse error.
Removed redundant `return OK;` which were already handled after the big
`if`/`else if`/`else` for `TK_IDENTIFIER`.
Part of #17372.
Godot currently supports zero padding for integers, octals and
hexadecimals when using format strings, but not for floats.
This commit adds support for zero padding for floats, thus ensuring
consistent behavior for all types, and making Godot's format specifiers'
behavior closer to c's `printf()`.
Before: `print("<%07.2f>" % -0.2345)` prints `< -0.23>`.
Now: `print("<%07.2f>" % -0.2345)` prints `<-000.23>`.
`print("<%7.2f>" % -0.2345)` prints `< -0.23>`.
`erase()` calls `find()` to get the index of the element to remove, if
any.
c2151e1813/core/local_vector.h (L77-L81)
`find()` returns a signed integer. In particular, it returns -1 if
no element is found. Since `erase()` converts this to an unsigned type, the
wrong element may be erroneously removed from the vector.
Other ways to fix this would involve changing function signatures, so
this seemed to be the least disruptive change.
Fixes#38884
Semicolons are not necessary after function definitions or control flow
blocks, and having some code use them makes things inconsistent (and
occasionally can mess up `clang-format`'s formatting).
Removing them is tedious work though, I had to do this manually (regex
+ manual review) as I couldn't find a tool for that. All other code
folders would need to get the same treatment.
Remove _sort_children from script bindings:
_sort_children is an internal method which shouldn't be exposed to scripts.
Added support for non-bound methods in MessageQueue:
So we can use deferred calls without exposing internal methods to scripts.
Added debug checks in CallableCustomMethodPointer:
Adding method pointer callables to the message queue was causing crashes
in case an object was destroyed and the same memory was allocated for
another one. The new object had a valid object id but the call was erroneous.
Release will be fixed later, along with Variant which has the same problem and
is also fixed for debug only.
As of Godot 3.0, HQ2X is no longer used to upscale the editor theme
and icons on hiDPI displays, which limited its effective uses.
HQ2X was also used to upscale the project theme when the "Use Hidpi"
project setting was enabled, but results were often less than ideal.
The new StyleBoxFlat and SVG support also make HQ2X less important
to have as a core feature.
This decreases binary sizes slightly (-150 KB on most platforms,
-212 KB on WebAssembly release).
This partially addresses #12419.
I couldn't find a tool that enforces it, so I went the manual route:
```
find -name "thirdparty" -prune \
-o -name "*.cpp" -o -name "*.h" -o -name "*.m" -o -name "*.mm" \
-o -name "*.glsl" > files
perl -0777 -pi -e 's/\n}\n([^#])/\n}\n\n\1/g' $(cat files)
misc/scripts/fix_style.sh -c
```
This adds a newline after all `}` on the first column, unless they
are followed by `#` (typically `#endif`). This leads to having lots
of places with two lines between function/class definitions, but
clang-format then fixes it as we enforce max one line of separation.
This doesn't fix potential occurrences of function definitions which
are indented (e.g. for a helper class defined in a .cpp), but it's
better than nothing. Also can't be made to run easily on CI/hooks so
we'll have to be careful with new code.
Part of #33027.
Which means that reduz' beloved style which we all became used to
will now be changed automatically to remove the first empty line.
This makes us lean closer to 1TBS (the one true brace style) instead
of hybridating it with some Allman-inspired spacing.
There's still the case of braces around single-statement blocks that
needs to be addressed (but clang-format can't help with that, but
clang-tidy may if we agree about it).
Part of #33027.
Using `clang-tidy`'s `modernize-use-default-member-init` check and
manual review of the changes, and some extra manual changes that
`clang-tidy` failed to do.
Also went manually through all of `core` to find occurrences that
`clang-tidy` couldn't handle, especially all initializations done
in a constructor without using initializer lists.
-Added LocalVector (needed it)
-Added stb_rect_pack (It's pretty cool, we could probably use it for other stuff too)
-Fixes and changes all around the place
-Added library for 128 bits fixed point (required for Delaunay3D)
This reverts commit ec7b481170.
This was wrong, `d` is not a distance but the `d` constant in the
parametric equation `ax + by + cz = d` describing the plane.
Part of #33027, also discussed in #29848.
Enforcing the use of brackets even on single line statements would be
preferred, but `clang-format` doesn't have this functionality yet.
Now the stack saved in a `GDScriptFunctionState` is cleared as soon as the `yield()` operation is known not to be resumed because either the script, the instance or both are deleted.
This clears problems like leaked objects by eliminating cases of circular references between `GDScriptFunctionState`s preventing them and the objects they refer to in their saved stacks from being released. As an example, this makes using `SceneTreeTimer` safer.
Furthermore, with this change it's now possible to print early warnings about `yield()`s to released script/instances, as now we know they won't be successfully resumed as the condition for that happens. However, this PR doesn't add such messages, to keep the observed behavior the same for the time being.
Also, now a backup of the function name in `GDScriptFunctionState` is used, since the script may not be valid by the time the function name is needed for the resume-after-yield error messages.
Skew is x-axis only, because it must be bidirectionally convertible to a 2x3 matrix, but you can subtract it to the rotation to get the effect on y-axis
This fixes numerous false positives coming out of the culling system.
AABB checks are now a full separating-axis check against the frustum, with the points of the frustum being compared to the planes of the box just as the points of the box were being compared to the planes of the frustum. This fixes large objects behind the camera not being culled correctly.
Some systems that used frustums that were (sometimes mistakenly?) unbounded on one or more side have been modified to be fully enclosed.
`OS.shell_open()` will pass on the path directly to the OS' shell
handler (which can handle file paths or URLs). It can't handle
Godot-specific paths, so these need to be converted with
`ProjectSettings.globalize_path()` first.
It changed name as part of the DisplayServer and input refactoring
in #37317, with the rationale that input no longer goes through the
main loop, so the previous Input singleton now only does filtering.
But the gains in consistency are quite limited in the renaming, and
it breaks compatibility for all scripts and tutorials that access
the Input singleton via the scripting language. A temporary option
was suggested to keep the scripting singleton named `Input` even if
its type is `InputFilter`, but that adds inconsistency and breaks C#.
Fixesgodotengine/godot-proposals#639.
Fixes#37319.
Fixes#37690.
The 204 and 205 are the older, SDL 2.0.4 and 2.0.5 compatible mappings,
but since all new mappings have only been added to the main
gamecontrollerdb.txt which overrides the older entries, it doesn't make
much sense for us to keep the old databases.
We do not support the SDL2 half axes and inverted axes features from
gamecontrollerdb.txt, but this only impacts the specific controllers
which can use those features, the rest are parsed and used properly.
As for godotcontrollerdb.txt, it doesn't make sense for us to maintain
our own custom mappings instead of submitting them upstream. The only
exception is the Javascript and UWP platforms for which no bindings are
available upstream, so we keep those entries.
Note: Only replaced 2 instances to test, Node.get_children and TileMap.get_used_cells
Note: Will do a mass replace on later PRs of whathever I can find, but probably need
a tool to grep through doc.
Warning: Mono will break, needs to be fixed (and so do TypeScript and NativeScript, need to ask respective maintainers)
Also added an easier way to load native GLSL shaders.
Extras:
Had to fix no-cache for subresources in resource loader, it was not properly working, making shaders not properly reload.
Note:
The precommit hooks are broken because they don't seem to support enums from one class being used in another.
Feel free to fix this after merging this PR.
Also implemented decal atlas, so projectors and other stuff can be added.
Sidenote: Had to make RID hashable, so some unrelated includes changed
in order to include it in hashfuncs.h
- Made shadow bias size independent, so it will remain when changing light or camera size.
- Implemented normal offset bias, which greatly enhances quality.
- Added transmission to subsurface scattering
- Reimplemented shadow filter modes
Closes#17260
Configured for a max line length of 120 characters.
psf/black is very opinionated and purposely doesn't leave much room for
configuration. The output is mostly OK so that should be fine for us,
but some things worth noting:
- Manually wrapped strings will be reflowed, so by using a line length
of 120 for the sake of preserving readability for our long command
calls, it also means that some manually wrapped strings are back on
the same line and should be manually merged again.
- Code generators using string concatenation extensively look awful,
since black puts each operand on a single line. We need to refactor
these generators to use more pythonic string formatting, for which
many options are available (`%`, `format` or f-strings).
- CI checks and a pre-commit hook will be added to ensure that future
buildsystem changes are well-formatted.
Namely:
```
modules/basis_universal/register_types.cpp: In function 'Ref<Image> basis_universal_unpacker(const Vector<unsigned char>&)':
modules/basis_universal/register_types.cpp:266:15: warning: 'imgfmt' may be used uninitialized in this function [-Wmaybe-uninitialized]
266 | image->create(info.m_width, info.m_height, info.m_total_levels > 1, imgfmt, gpudata);
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
modules/basis_universal/register_types.cpp:255:39: warning: 'format' may be used uninitialized in this function [-Wmaybe-uninitialized]
255 | bool ret = tr.transcode_image_level(ptr, size, 0, i, dst + ofs, level.m_total_blocks - i, format);
| ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
```
servers/visual_server.cpp: In member function 'Error VisualServer::_surface_set_data(Array, uint32_t, uint32_t*, uint32_t, Vector<unsigned char>&, int, Vector<unsigned char>&, int, AABB&, Vector<AABB>&)':
servers/visual_server.cpp:636:15: warning: 'iw' may be used uninitialized in this function [-Wmaybe-uninitialized]
636 | copymem(&iw[i * 2], &v, 2);
| ^
```
```
core/image.cpp: In member function 'Error Image::generate_mipmap_roughness(Image::RoughnessChannel, const Ref<Image>&)':
core/image.cpp:1683:11: warning: 'roughness' may be used uninitialized in this function [-Wmaybe-uninitialized]
1683 | float roughness;
| ^~~~~~~~~
```
The minimum slider value no longer allows decreasing the value below
the default, as this can cause things to break in the editor.
The maximum slider value was also increased to 4096 since it can safely
be increased to that value (some add-ons may require it).
This closes#37052.
The `TextEdit` one was indeed a potential bug.
The `PCKPacker` one seems to be a false positive, it's already in a
`for` loop that depends on `files.size()`.
- Parse `.po` files from `doc/translations/*.po` like already done
with `editor/translations/*.po`.
- Add logic to register a doc translation mapping in `TranslationServer`
and `EditorSettings`.
- Add `DTR()` to lookup the doc translation mapping (similar to `TTR()`).
Strings are automatically dedented and stripped of whitespace to ensure
that they would match the translation catalog.
- Use `DTR()` to translate relevant strings in `EditorHelp`,
`EditorInspector`, `CreateDialog`, `ConnectionsDialog`.
- Small simplification to `TranslationLoaderPO`, the path argument was
not really meaningful.
Implementation for new Variant types Callable, Signal, StringName.
Added support for PackedInt64Array and PackedFloat64Array.
Add generation of signal members as events, as well as support for
user created signals as events.
NOTE: As of now, raising such events will not emit the signal. As such,
one must use `EmitSignal` instead of raising the event directly.
Removed old ThreadLocal fallback class. It's safe to use thread_local now since
it's supported on all minimum versions of compilers we support.
For us, it practically only changes the fact that `A<A<int>>` is now
used instead of the C++03 compatible `A<A<int> >`.
Note: clang-format 10+ changed the `Standard` arguments to fully
specified `c++11`, `c++14`, etc. versions, but we can't use `c++17`
now if we want to preserve compatibility with clang-format 8 and 9.
`Cpp11` is still supported as deprecated alias for `Latest`.
We now require a compiler with C++17 support, so we don't need to
check for features added to GCC 5 or Clang 3.2.
Clang builtin availability checks were unused anyway as Clang defines
`__GNUC__` as it's also a GNU C implementation.
Fixes#36986.
EngineDebugger is the new interface to access the debugger.
It tries to be as agnostic as possible on the data that various
subsystems can expose.
It allows 2 types of interactions:
- Profilers:
A subsystem can register a profiler, assigning it a unique name.
That name can be used to activate the profiler or add data to it.
The registered profiler can be composed of up to 3 functions:
- Toggle: called when the profiler is activated/deactivated.
- Add: called whenever data is added to the debugger
(via `EngineDebugger::profiler_add_frame_data`)
- Tick: called every frame (during idle), receives frame times.
- Captures: (Only relevant in remote debugger for now)
A subsystem can register a capture, assigning it a unique name.
When receiving a message, the remote debugger will check if it starts
with `[prefix]:` and call the associated capture with name `prefix`.
Port MultiplayerAPI, Servers, Scripts, Visual, Performance to the new
profiler system.
Port SceneDebugger and RemoteDebugger to the new capture system.
The LocalDebugger also uses the new profiler system for scripts
profiling.
- Removed platform-specific implementations.
- Now all semaphores are in-object, unless they need to be conditionally created.
- Similarly to `Mutex`, provided a dummy implementation for when `NO_THREADS` is defined.
- Similarly to `Mutex`, methods are made `const` for easy use in such contexts.
- Language bindings updated: `wait()` and `post()` are now `void`.
- Language bindings updated: `try_wait()` added.
Bonus:
- Rewritten the `#ifdef` in `mutex.h` to meet the code style.
Namely, move the drive dropdown to just the left of the path text box and don't include the former
in the latter.
This improves the UX on Windows.
In the UNIX case, since its concept of drives is (ab)used to provide shortcuts to useful paths, its
dropdown is kept at the original location.
Remove now unnecessary bindings of signal callbacks in the public API.
There might be some false positives that need rebinding if they were
meant to be public.
No regular expressions were harmed in the making of this commit.
(Nah, just kidding.)
Main:
- It's now implemented thanks to `<mutex>`. No more platform-specific implementations.
- `BinaryMutex` (non-recursive) is added, as an alternative for special cases.
- Doesn't need allocation/deallocation anymore. It can live in the stack and be part of other classes.
- Because of that, it's methods are now `const` and the inner mutex is `mutable` so it can be easily used in `const` contexts.
- A no-op implementation is provided if `NO_THREADS` is defined. No more need to add `#ifdef NO_THREADS` just for this.
- `MutexLock` now takes a reference. At this point the cases of null `Mutex`es are rare. If you ever need that, just don't use `MutexLock`.
- Thread-safe utilities are therefore simpler now.
Misc.:
- `ScopedMutexLock` is dropped and replaced by `MutexLock`, because they were pretty much the same.
- Every case of lock, do-something, unlock is replaced by `MutexLock` (complex cases where it's not straightfoward are kept as as explicit lock and unlock).
- `ShaderRD` contained an `std::mutex`, which has been replaced by `Mutex`.
- Renames PackedIntArray to PackedInt32Array.
- Renames PackedFloatArray to PackedFloat32Array.
- Adds PackedInt64Array and PackedFloat64Array.
- Renames Variant::REAL to Variant::FLOAT for consistency.
Packed arrays are for storing large amount of data and creating stuff like
meshes, buffers. textures, etc. Forcing them to be 64 is a huge waste of
memory. That said, many users requested the ability to have 64 bits packed
arrays for their games, so this is just an optional added type.
For Variant, the float datatype is always 64 bits, and exposed as `float`.
We still have `real_t` which is the datatype that can change from 32 to 64
bits depending on a compile flag (not entirely working right now, but that's
the idea). It affects math related datatypes and code only.
Neither Variant nor PackedArray make use of real_t, which is only intended
for math precision, so the term is removed from there to keep only float.
Was missed in #36393 because no `callable_mp()` calls were actually
compiled with `tools=no` in that PR.
Also work around GCC warning that also affects the
`call_with_variant_args_ret_helper` variant.
Arrays inside of Variant are unique and use reference counting.
When you assign a variant containing a packed array to another, or
when you call non const functions to arrays, this will work even
if the array is inside a dictionary, so they will from now pass
as reference.
The difference with regular variant arrays is that, once passed
to a function in the C++ API, they are no longer shared. This is
required for security and thread safety, as those arrays are
mainly used to pass data back and forth even between threads.
This attribute is now part of the standard we target so we no longer
need compiler-specific hacks.
Also enables -Wimplicit-fallthrough for Clang now that we can properly
support it. It's already on by default for GCC's -Wextra.
Fixes new warnings raised by Clang's -Wimplicit-fallthrough.
WARNING: Requires C++17 'guaranteed copy elision' to fix ambiguous
operator problems in Variant.
This was added for this commit (and future C++17 uses) in #36457.
This is a temporary hack until vnen and reduz can work on a proper fix.
The changes in 867d073b98 exposed a
GDScript issue, which apparently triggers an automatic unreferencing.
This hack only makes it possible to use the editor again, but GDScript
is still broken.
UDP sockets can be "connected" to filter packets from a specific source.
In case of a bound socket (e.g. server), a new socket can be created on
the same address/port that will receive all packets that are not
filtered by a more specific socket (e.g. the previously connect socket).
This way, a UDPServer can listen to new packets, and return a new
PacketPeerUDP when receiving one, knowing that is a "new client".
It was initially implemented in #5871 for Godot 3.0, but never really
completed or thoroughly tested for most platforms. It then stayed in
limbo and nobody seems really keen to finish it, so it's better to
remove it in 4.0, and re-add eventually (possibly with a different API)
if there's demand and an implementation confirmed working on all
platforms.
Closes#8770.
Due to the port to Vulkan and complete redesign of the rendering backend,
the `drivers/gles3` code is no longer usable in this state and is not
planned to be ported to the new architecture.
The GLES2 backend is kept (while still disabled and non-working) as it
will eventually be ported to serve as the low-end renderer for Godot 4.0.
Some GLES3 features might be selectively ported to the updated GLES2
backend if there's a need for them, and extensions we can use for that.
So long, OpenGL driver bugs!
It was added for 3.2 in #27485 to preserve backwards compatibility,
but we can now remove it.
It is still needed in MultiplayerAPI as it's the only way to control
it for the internal put_var calls.
- Now is sent the method ID rather the full function name.
- The passed IDs (Node and Method) are compressed so to use less possible space.
- The variant (INT and BOOL) is now encoded and compressed so to use much less data.
- Optimized RPCMode retrieval for GDScript functions.
- Added checksum to assert the methods are the same across peers.
This work has been kindly sponsored by IMVU.
