- Fixed spout creating potions from any fluid
- Fixed pipes not actually transferring the type of fluid selected by layer II flow propagation
- Fixed some fluid handlers erasing nbt data of extracted fluidstacks
- Fix sidedness issues in Config packets
- Fixed water bottles able to be gather by clicking honey or chocolate fluids
- Fixed deployer not parting with its excess items
- Added hint message for backed up deployers
- Fixed basin spoutputs appearing on blocked faces
- Fixed belts sometimes popping off when disassembling a contraption
- Made Portable Storage Interfaces a little more lenient to engage at funny angles
- Encasing fluid pipes now locks their configuration
- Encased fluid pipes now join textures with adjacent casing blocks
- Fixed windowed pipe not allowing to be encased
- Fixed wrapped models not passing down model data in multi layered situations
- Encased shafts and gearboxes can now join textures with respective casing blocks
- Added back encased shaft items for creative mode
- Fixed encased shafts able to be created with casing and cogs
- Controller rails can now control furnace minecarts
- Controller rails now snap to adjacent rails with the correct facing
- Controller rails no longer get reversed when transitioning to or from a slope in certain orientations
- Controller rails are now craftable
- Fun refactors
- Updated texture
- Recipe adjustments
- apply redstone's block coloring to the controller rail
- add a little more polish to the piston pole placement helper
- textures at create:block/controller_rail_on and _off are currently unused, _analog is used for item only i think
- Further attempts at improving the coupling physics
- Fixed reversed couplings losing their physics entry point
- Fixed "angel block" placement through super glue
- Brass tunnels now distribute across matching filtered outputs exclusively before sending items to unfiltered sides
- Less chute logic on render thread pls
- Fixed flapfunnels not taking secondary items off depots
- Funnels can now sit horizontally on saws and drains
- Added a recipe from natural to regular scoria
- Added useful goggle information to chutes
- (0.3.0) Chutes can no longer carry a fan-like air stream
- Fixed chutes overwriting contained items when picking them up from below
- Basins can now push outputs to any open inventory
- Basin output can now be controlled using a wrench
- Fluid Tanks and Creative Fluid Tanks now form a combined fluid inventory on contraptions
- Added the Portable Fluid Interface
- Fixed tanks placed with nbt not clamping their contained fluids
- Item Storage information on Contraptions no longer get sent to the client
- Combined fluid storage synchronizes to the client and applies new contents to the corresponding mounted TE renderers
- Fixed motion of dripping potion particles from fluid pipe flow indication
- Portable Storage interfaces now interrupt their connection when receiving redstone power
- Fluid tanks now attach the full multiblock when a part of them is moved by a contraption
- Fluid tanks now rotate and mirror properly
- Fluid tanks now react to movement properly
- Creative fluid tanks no longer lose configured fluid when more tanks are added to it
- Fluid tanks no longer render ghost fluids when placed with nbt
- Fixed some inconsistencies with tanks distributing fluids when connecting/disconnecting in multiblocks
- TileEntities are now being considered when rendering static blocks in a moving structure. Fixed brackets and tank blocks not rendering properly
- Poles no longer display their length when used for decoration
- Increased scope of caught exceptions when rendering modded tes in schematics and on contraptions
- add placement helper for piston extension poles
- add piston pole length to goggle overlay
- fix mechanical pistons being a little too generous with pole alignment
- allow ProperDirectionalBlocks to be rotated with the wrench
- Fixed stabilizer bearings not always rotating their head against parent transform
- Windmill bearings now display a tooltip when waiting to be updated by a player
- Removed obsolete overrides from hotswapping streak
- More cleaning up and major refactoring in Contraption entity implementation (needs testing)
- Minecarts can no longer be mounted on seats
- Mechanical bearings now "stabilize" rotation of a contraption with an attached sub-contraption
- Added hints when looking at
- Mechanical arms with no targets
- Funnels attempted to be used like 0.2 transposers
- Bearings that require an update to attach to their blocks
- Added some additional feedback when players apply filters
- Spouts now place two blocks above a depot/belt when used
- Basins can no longer be placed directly under a press or mixer
- Fixed prismarine recipe cycles from various mod interactions
- Updated wrench model (Kryppers)
- Funnels on depots and perpendicular to belts use a new model
- Funnels at the end of belts
- no longer have a directional constraint
- can now be extended/retracted manually
- now hold items back at the block boundary
- Extracting Funnels on top of belts can now specify an amount no their filter, taking x items off a nearby stack when possible
- Fixed some issues with belt/funnel interaction
- Items reaching the end of a belt will still be regularly checked by perpendicular funnels in the space
- Contraptions now render blocks in appropriate render layers
- Straight diagonal Chutes now create an intersection when a funnel is directly above them
- Attempted a safety fix to bracket removal from shafts and cogs
- Fixed windmill structures not stalling when their attached network is overstressed
Added a period to the end of the Spout tooltip to match other tooltips
Fixed the blaze burner tooltip (was using blaze_heater, which I assume is an older name for the block)
- Added wooden and metal brackets
- Brackets can be applied to shafts, cogs and fluid pipes
- Brackets prevent pipes from connecting to adjacent pipes
- Fixed blockzapper not showing up in the searchable creative menu
- Added config values for hose pulleys
- Hose pulleys now extinguish lit waterloggable blocks
- Hose pulley now break blocks that cannot withstand vanilla fluid flows
- Spout is now wrenchable
- Fixed spout not activating properly
- Added fluid particles that supports fluids without a block variant
- Potion fluids now apply their effects to nearby entities when spilling from an open end
- Fixed pumps not rendering fluid particles when spilling/pulling fluids directly
- Hose Pulley no longer accepts fluids that cannot be placed
- Hose Pulleys and open pipes can no longer place water in the nether
- Some Refactors to the particle system
- Reverted reversed crtl activation for schematic tools
- Added a command to fix broken lighting in some of creates models (enables experimental forge block rendering)
- Fixed fluid ingredients in jei once again
- Fixed fluid tag ingredients being resolved on the client
- Added the item drain
- Refactored pulley renderers
- Fixed belt funnel not dropping filters
- Fixed funnel filter slot positioning on upward facing funnels
- Sails can now be sheared
- Fixed the kinetic connectivity of the rotation speed controller
- Valve handles can now by dyed in world
- Seats can now be dyed in world
- Fixed Stockpile Switch emitting redstone power towards its detection target
- Organized Imports
- Fixed server launch issues
- Added the hose pulley
- Added creative tanks
- Fixed sails not getting consumed when placed against each other
- Items can now be inserted onto belts regardless of it moving or not
- Fixed item duplication on stopped belts
- Refactored fluid block rendering in JEI
- Reworked model of the schematic table
- Hand cranks can now be made without the need of brass
- Fixed tooltip referrals
- Crafters can no longer be covered when while they are holding an item
- Pushed some numbers around
- Fixed Mechanical Press animation de-sync between server and client
- The press no longer requires a redstone signal to activate on in-world items
- Fixed spouts and basin trying to create potion buckets
- The Mechanical bearing can no longer generate force from wind
- Added the windmill bearing
- Windmill bearings can be configured to rotate counter-clockwise
- Added Sail Frames and Sails
- Sails can by dyed in-world
- Sails negate fall damage
- Sails attach themselves to blocks and do not require a sticky surface or chassis
- Clockwork bearings can now be configured to switch minute and hour hand aswell as use a 24 hour cycle
- Fixed tunnels with windows occluding block faces directly behind them
- Fixed item model of the mechanical saw
- remapped seat tooltips
- remapped outdated lang keys
- applied changes of #395 to 1.15
- Fixed Schematic hotbar overlay sometimes drawing on top of the item icon
- Fixed mechanical arm lighting and render bounds issues
- Bell contraptions no longer causes a NullPointerException when they
are stopped
- Schematic usage shouldn't require a player to not be sneaking, and
changes the key to CTRL to match tool tips
- Refactored JEI plugin to use a builder for categories
- The mixer can now process vanilla potion recipes
- JEI support for fluid potion mixing
- Refined some categories to not show obsolete information
- Compacting and automatic vanilla packing are now in separate tabs
- Fluids can now be manually picked up from a basin
- Basins and Spouts can now extract from and fill vanilla potion items
- Improved the filtering for fluid tests, such as the basin recipe and smart pipes
- Fixed CombinedTankWrapper losing nbt data of transferred fluidstacks
Fixed an error in my previous commit.
Introduced basic Tooltips for fluid items.
I've left the smart pipe entries as placeholder as I've not tried them out yet.
- Fluids in JEI now display the exact amount required
- Fixed short background of custom compacting JEI
- Fixed localization of sawing recipe category
- Fixed blocks waterlogged by a pump not scheduling a fluid update
- Arms can no longer feed random junk to a jukebox
- Arms are no longer oblivious to hot-swapped blocks in its target areas
- Arms can now directly extract from and insert to Deployers and Crafters
- Arms can now feed blaze burners
- Fixed brass funnels deleting items inserted into a full or stalled inventory
- Fixed brass funnels in hopper mode not showing amounts on filters when transferring between server-only inventories
- Arms & Deployers can now be paused using a redstone signal; stopping them after their next completed cycle
- Fixed zapper tools not applying changes when the screen is closed using the confirm button
- Reorganized valve handle registration
- Added more preliminary recipes
- Rows of nixie tubes will now display text from a name tag used on them
- Nixie tubes will dynamically update score/selector/nbt components in the displayed text
- The collision response now (semi)-supports yaw-pitch combined rotations of contraptions
- Attempted collision and rendering of contraption couplings moving up and downhill
- Fixed sychronization issues of a mounted contraptions' initial orientation
- Contraption couplings no longer render the virtual coupling connection
- Entities can no longer mount the cart connected by another carts' contraption
- Contraption coupligs no longer rotate backwards when opposite couplings are added onto it
- Minecarts no longer deadlock each other when one of them had stalled due to an unloaded coupling end
- Cart assemblers only disassemble coupling contraptions if both carts are within an inactive cart assembler
- Fixed interactions between coupling contraptions and furnace/chest minecart invs
- Fixed concurrency / race condition issues with contraptions loading in during a collision cycle
- Reworked implementation model of minecart tracking and couplings
- Coupling items now get consumed when used in survival mode
- Added some player feedback when couplings cannot be created
- Fixed couplings disappearing on the client due to sync issues
- Wrenches can now remove minecarts in one hit
- Wrenches can now be used to remove couplings from minecarts
- Cart assemblers now attach themselves to the block above, no longer requiring active "sticky-ness" of the contraption towards it
- Minecarts can no longer be moved while a contraption is stalling them
- Fixed players flailing their limbs around while standing still on a moving contraption
- Attempted to reduce drag of remote player positions while on a contraption
- Contraptions no longer log out with the player riding them
- Attribute filters are now made of brass
- Added the ability to disable auto-compat with vanilla recipe types in the configs
- Added a recipe type for custom basin/press compacting
- Basins can now process items and liquids in recipes
- Input items/fluids of a basin can now be extracted or reused in further processing
- A basin diagonally below another basin with collect outputs of recipes processed in the top basin for ease of automation
- (Temporary debug recipes)
- Visual rework of all active UIs
- Fixed large scale renderers such as belts, cannons, pulleys to disappear when partially out of frame
- Schematic and Quill now has the ability to convert a selection to a readied schematic instantly
- Moved option input of cart assemblers to side faces
- Fixed crash when attempting to smelt items on belts/depots
- Stockpile switches can now be inverted
- Fixed stockpile switches not dynamically updating gui indicators frequently enough
- Tanks can no longer be directly interacted with in survival mode
- Sequenced gearshifts now emit a comparator signal based on their current instruction index
- The Piston instruction for sequencers can now accept distances up to 128m
- Fixed some rendering inconsistencies with symmetry mirrors
- Reworked symmetry mirror models to match the tool better
- Attribute filters can now add inverted conditions to the list
- Added the attribute "can be crushed"
- Made the schematicannon interface a little less confusing
- Fixed launched items of the schematicannon rendering warped
- Added a straight pipe variant to cut flows using rotational input
- Added a slower more precise variant of the hand crank
- Basins now render their contained fluids
- Implemented new PSI models by Kryppers
- PSIs are now used in pairs like contacts
- PSIs now act as an inventory proxy of the attached contraption
- Comparators can detect when two PSIs are interfacing
- Contraptions will continue moving after a second of inactivity
- Belt observer -> Content observer
- Content observers can now monitor any inventory and funnel transactions
- Stockpile switches no longer only access slots exposed to a specific side of an inventory
- Stockpile switches can now take a filter
- Brass tunnels once again have the ability to synchronize inputs among a chain
- Mechanical arms now have a range limitation
- Mechanical arms now wait with initialization until their area is fully loaded
- Chutes no longer ignore the direction of an attached fans air flow
- Chutes now render particles indicating their movement direction
- Chutes can now pull items up from belts or off the ground
- Fixed item model of shadow casing
- Fixed invisible quads under funnels when no casing is applied to the belt
- Belt mounted funnels can now be perpendicular to the belt theyre on
- Funnels can now transpose items like a hopper when facing down
- Item distribution across belts using brass tunnels can now be configured with a wrench
- Added new icons for the distribution options of arms and tunnels
- Removed obsolete code
- Fixed some weirdness with creative crates and funnels
- Reworked tileentity behaviours for inventory interaction
- Deployers no longer actively pull items from other inventories
- Some more work on basins
- Added a new inventory type wrapping an itemstack handler that automatically syncs the tile entity. It also implements IInventory for recipe shenanigans
- Held items of a deployer can now only be extracted by other blocks if it does not match the filter
- Fixed excess items not able to be extracted from deployers
- Removed some things
- Funnels no longer actively transpose items between chutes and inventories unless they are vertical
- Chutes can now active pull and insert items from/to inventories above/below them
- Fixed upright items rendering inconsistently between belt and depot
- Fixed various timing and sync issues with the spout
- Added a recipe type for spout filling
- Fixed more co-modification on belts
- Item and fluid nbt tags in recipes are now data-generated as json objects rather than strings
- Transported item processing can now leave items behind
- Transported item processing now has more meaningful result data
- Tweaked spout animation
- Fixed cullfaces on spout model
- add a dev utility that allows us to force-unload chunks
- move mechanical arm scrollbox
- fix oxidizing blocks trying to access a blockstate from unloaded chunks when on the border
- Expanded the RecipeProvider infrastructure
- Migrated mechanical crafting recipes to generated
- Migrated cooking recipes to generated
- Fixed missing particles on vertical motor model
- Adjusted a few recipes
- Reworked and cleaned up Create's ProcessingRecipes
- Prepared ProcessingRecipes for fluid ingredients and outputs
- Added datagen infrastructure to ProcessingRecipes
- Migrated all hand-written ProcessingRecipes to generated
- Removed scrollinput on mixers
- Fixed recipe lookup cache not invalidating on datapack reload
- Removed "catalyst" ingredients
- Reduced ambient dripping particles of fluid pipes
- Fixed reversed uvs on encased fans
- Fixed tile entities not being added to contraptions client-side
- Added encased and non-opaque versions of the fluid pipe.
- Added new generic te behaviour across pipe blocks for their rims/attachment models
- Pipes and pumps now render a little drain cap when connected to a fluid inventory
- Implemented reworked chute models by Kryppers
- Implemented new basin model by Kryppers
- Chutes now have proper selection bounds
- Some minor texture & model touch-ups
- Fixed symmetry wand position in its GUI
- Fixed some inconsistencies with a tanks' fluidhandler invalidation when resized
- Patched crashes in present fluid handling of the basin
- Tanks now slightly shade horizontal faces of the contained liquid
- Tanks no longer resend data every tick when filled gradually
- Introduced a new lerped value type with better design decisions
- Refactored Smart tileentity serialization to better support custom overrides in contained behaviours
- Pumps propagate flows in the pipe networks in front and behind itself.
- Pumps collect all possible in and outputs across the reachable pipe graph as endpoints
- Flows move across multiple branches of a pipe network when both are equally viable
- Open-ended pipes are treated as endpoints and leak fluid into and out of a block space
- Open endpoints serialize stateful information about fluid units gathered and held at the interface
- Open endpoints turn a fluid block into 1000 fluid units and back
- Open endpoints undo their transaction when their flow changes from pull to push
- Open endpoints cannot pull fluids back when a full liquid block was not placed yet
- Open endpoints waterlog blocks when the provided fluid is water
- A collision response is triggered when different types of fluids meet at open endpoints
- Fluids are transferred instantly by the throughput of a completed flow per tick
- Pumps cut flows when vital pipes are removed
- Pumps do not lose progress of finished flows when an unrelated part of the pipe network changes
- Pumps do not lose progress of finished flows when reversed
- Pumps distribute their throughput across available input flows evenly
- Pumps distribute gathered input fluid across outputs evenly
- Pumps expose furthest reachable pipefaces to other pumps for chained transfer
- Chained pumps with fully overlapping flow sections provide their endpoints at the entrance of the other pump
- Chained pumps with overlapping flow sections participate in two shared endpoints, one for each pump dominating the contested region
- Chained pumps with overlapping flow only transfer via the optimal of the two possible endpoints based on their speeds
- Chained pumps of equal speed pick one of the two available endpoints deterministically
- Pumps transfer without flows when no pipe is between the pump and the endpoint
- Pumps serialize and recover stateful information about held fluid units at open endpoints
- Chained pumps do not actively transfer when both are partaking with push flows (or both pulling)
- A pull flow originating from an inter-pump endpoint only commences when the corresponding push flow is completed
- Chained pumps re-determine the optimal flow when the speed of one is changed at runtime
- Throughput of chained pumps is determined by their weakest link in terms of speed
- Endpoints created for chained pumps is treated equally to other available endpoints when fluid is distributed
- Pipes do not contain a physical amount of fluid.
- Pipes never hold serialized vital stateful information about fluid transfer.
- Pipes synchronize local flow progress and fluid type to clients
- Flows in a pipe progress with the speed of the network flow
- A networks flow speed depends on the speed of the aggregated pump
- Pipe flows of different flow graphs of different pumps interact with each other
- A collision response is triggered when two different types of fluid meet within a pipe
- Pipes spawn particles to illustrate contained flows/liquids of flows
- The fluid transfer role is exposed through a TE behaviour with some callbacks and properties
- Open endpoints show particles when interacting with in-world fluids
- buffering SeatMovementBehaviour
- changed visibility of AllMovementBehaviours.addMovementBehaviour(ResourceLocation, MovementBehaviour) to public for easier mod compat
- added console warn message when something tries to register more than one movement behaviour per block
- Seats now pick up non-player entities when touching them while being moved
- Seats now drop off entities when being moved into a solid block
- Previously colliding entities now get moved to match their position on the placed structure on disassembly
- Contraption motion no longer gets fed into the collision response for non-minecart contraptions
- The server now gets frequent updates about client players riding a contraption, fixes instabilities with projectiles, damage and anti-fly detection
- Players can now take fall damage when colliding with contraptions
- Any living entity can now use seats
- Fix client sync issues with seats
- Fixed contraptions double-reversing roll and pitch values when communicating to the collision engine
- Seats now transfer their passengers to a contraption when moved and back when disassembled
- Attempted further refinements to the collision response of horizontally rotated contraptions
- Set up a hook to inject custom interaction between players and contraption mounted blocks on right-click
- Seats can now by mounted by players while assembled to a contraption
- Minor refactors to the contraption class
- Collision separation now supports motion sweeping in order to avoid tunnelling when entities drop onto contraptions from a greater height
- Further improved the collision response
- Entities can no longer be clipped into solid walls by the collision response
- moved fan transparent blocks to block tag
- added blaze heater as transparent
- blaze heater on lowest level is now a valid bulk smokig block
- blaze heater on heat 2 and higher is now a valid bulk smelting block (that requires fuel but does not spill lava or set your house on fire)
- added empty blaze heater
- catching blazes (rclick blazes or a blaze spawner)
- only blaze heaters with blaze can heat basins or power fans
- updated item tooltip to fit the discussed fueling system
- Heated Mixing: Mixing can now require the player to heat the basin (with either the usual fan heaters for a heat level of 1 or the blaze heater for higher heat levels)
- Made mixing brass ingots from copper and zinc ingots require heating (as example)
- added the blaze heater to valid fan heaters
- added TE renderer for fan heater to display a blaze head always facing the player
- added fueling of blaze heater with furnace fuel (onUse event, not with inventory to challenge the automation. To be discussed.)
todo:
- add heat requirement display to JEI
- better item model for blaze heater
- new special fuel for higher heat levels
- fan stoking
- added Interface IExtendedProcessingRecipe supporting requiredHeat, fluid inputs and fluid outputs
- set Mixing recipes to use the extended serializer in AllRecipeTypes
- removed constructor parameters specifying fluid usage in recipes that do not support fluids (and changed the ConversionRecipe JEI support class back)
- cleaned up annotations, ordered AllRecipeType enum values and imports, reformatted recipe code
- Arms can no longer insert into powered brass funnels
- Slight ArmInteractionPoint refactor
- Arms can now interact with Millstones, Basins, Jukeboxes, Crushing Wheels and the Mechanical Saw
- Fixed crash when logging into a world with a running mixer
- Arms now start to dance when one of their in or outputs is a running jukebox
- Arms can now be mounted on the ceiling
- Arms now always prefer the interaction points that were selected first
- Fixed belt funnels not updating their blockstate properly when transitioning from other funnel types
- Vertical funnels next to the end of a belt will now stall the belt when unable to collect incoming items
- Minor model & texture touch ups
- Arm no longer cancels player interaction when its empty handed
- Fixed chutes not vertically interacting with andesite funnels
- Fixed dynamic Mechanical Arm parts not being lit correctly
- Fixed Mechanical Arm not always initializing interaction points on the client
- Belt tunnels now create side-openings for belt-like blocks such as the depot
- Belt tunnels no longer create flaps when there is a belt funnel connected to that side
- Brass tunnels can now distribute items among their output sides and other connected tunnels, taking into account their sided filtering
- Brass tunnels now visually connect for upcoming splitter functionality
- Added a tileentity behaviour that allows separate filtering for each face
- Added filtering to brass tunnels
- Removed synchronization behaviour of belt tunnels
- Belt tunnels can now be placed on non-reinforced belt segments, and will apply the missing casing automatically
- Bunch more renames
- Small tweaks to the andesite tunnel texture
- Mechanical arms can no longer take from belts covered by a tunnel
- Belt tunnels can now create a window when directly next to a funnel
- Fixed tunnel flaps not being triggered when inserting into a covered belt
- Removed pre-0.3 funnel blocks
- Added andesite variant to reality funnels, without filtering or redstone control
- Added andesite variant to belt tunnels
- Reality Funnel -> Brass Funnel
- Sideways and Vertical belts can now be reinforced with casing
- Belts can now be reinforced with andesite casing
- Reinforcing belts no longer consumes the casing block
- Reworked reinforced belt models
- Fixed flipped diagonal belt casing once again
- Fixed belts breaking instantly when punched in survival mode
- added a block tag non_movable conatining blocks that should not be moved with contraptions
- added a block tag for brittle blocks breaking without support
- moved obsidian from hardcoded to non_movable block tag
- moved flower pots, doors and bells from hardcoded to brittle block tag
- registrate block tagging of brittle blocks
- made immersive engineering connectors non-movable to avoid reported weird behavior
- Made Create cobble stone variants part of forge:cobblestone
- autumnity wood compat
- changed biomes o'plenty flower crushing to milling (as it is with vanilla flowers)
- atmospheric wood and flowers
- autumnity flowers
- blloomful wood and flowers
- botania petal milling to floral powder
- buzzier bees flowers
- druidcraft wood and flowers
- projectvibrantjourneys wood
- upgrade aquatic wood and flowers
This should resolve#389 for the most part.
- Chutes can now transfer items
- Chutes now propagate air flow from attached fans
- Fixed a few issues with mechanical arms
- Removed unused chute models
- Implemented appropriate interactions between funnels and chutes
- The arm blockitem can now be used to select inputs & outputs
- Arms now transfer items between inputs and outputs
- Arm support for Belts, Depots and Funnels
- Some safety checks in net code
- Minor refactor to NBTHelper
-added two config entries to offset the goggle overlay on x/y axis
-added a command (/create overlay [reset]) to allow editing the overlay position ingame
- Belt funnels now render with animated flaps
- Extracting funnels can now be given a stack size
- Filtering now supports setting the extraction count for empty filter slots (wildcard)
- Funnels on belts can now extract and insert items according to their setting and filter
- Funnels can now push/pull items to/from a depot
- Fixed creative crates not marking their inventory as removed when destroyed
- Funnels can now pick up items colliding with their front face
- When holding a funnel the game will now always prefer placement over block interaction
- Fixed items not able to be held in place by tunnels
- Depots can now hold on to items similarly to belts
- Item processing such as the press and bulk smelting now targets a Processing TE behaviour, rather than the belt only
- The press and similar processing can no longer commence whenever there is a block with a collision shape between item and machine
- Implemented item processing for Depots
- Items can seamlessly traverse from belts to depots
- Removed the IBeltAttachment system
- Item processing on belts is now a TE behaviour
- Added TE behaviour for allowing belts (and similar) to directly insert items
- Massive refactor to the Belts' inventory
- Fixed fast moving items missing their processing step
- Saws, Basins, Crushing Wheels, Belts and Crafters now interact through the new behaviour rather than hard-coded interactions
- Fixed items (visually) disappearing on saws while queueing up
- Items on belts now back up a little further away from the end of the belt
- Added filtering behaviour and in-world slots to new funnel blocks
- Filtering behaviour now supports slots active on multiple sides
- Funnels no longer wipe their TE when changing state
- Fixed VoxelShape for extended belt funnels
- Added a funnel block variant that interacts with chutes horizontally (same item)
- Belt and Chute Funnels now have a push/pull property
- Removed Chute Ports
- Tidied up R-Funnel texture sheet
- R-Funnels can now be powered by redstone
- Non-mounted R-Funnels are now full hopper-like blocks rather than fixtures
- Copper, Brass and Zinc blocks can now be used as beacon base block
- Copper, Brass and Zinc can now be used to activate a beacon
- Create ingots are now listed under the forge:ingots tag (not only forge:ingots/type)
- Create nuggets are now listed under the forge:nuggets tag (not only forge:nuggets/type)
- Create plates are now listed under the forge:plates tag (not only forge:plates/type)
- Updated registrate to support multiple tags
- Fixed reversed matrices and swapped rotation axes passed into the collision resolver
- Temporarily reduced collision manifold generation to collisions that are NOT edge-to-edge collisions.
- Enabled collision response for clockwork bearings
- Added blockstates, models and TE rendering for mechanical pumps
- Removed unused pipe textures
- Removed hasStaticPart in IWrenchable as it became obsolete in 1.15
- Bumped version
- Patched some localization gaps from the registry wipe
- TE's with an ItemStackHandler capability are now viable for mounted storage
- Fixed pulley placing down ropes when destroyed while moving
- Fixed inconsistency with glue removal and placement
- Fixed encoding of generated degree symbols in lang
- Fixed pistons along x moving at inconsistent speeds, overshooting their bounds
- Fixed belts along x not moving entities
- Fixed diagonal belts along z teleporting entities miles away
- Fixed tree fertilizer not working
- Fixed extractors looking for belt inventories too eagerly, adresses #327
- Slightly refactored Extendo Grip handlers
- Fixed missing particle texture of Extendo Grips
- Fixed crash when assembled minecarts pick up the block below their assembler
- Ploughs no longer break blocks if farmland is below them, adresses #345
- Fixed Schematic tools placing lit furnaces, adresses #342
- Super glue can no longer be removed while inbetween two blocks, adresses #341
- Added a safety check in RotationPropagation, addresses #340
- Players using Extendo Grips can now hurt and interact with entities within the extended range
- Hurting entities using Extendo Grips now applies massive knockback
- Serverconfig now registers together with the others
- Added missing stress config entries for components without a default stress impact greater than zero
- bumped version
- Tagged stone variants from Create palettes to generate in a terraforged world type
- Fixed gearbox pretending to be a deployer
- Fixed reversed rendering in the furnace engine TER
- Motors, fans, flywheels and handcranks now reverse their rotation when facing in negative axisdirections. Addresses #236
- Cart assemblers no longer auto-attach to blocks on their sides (top only)
- Removed temporary lang partial with entity names
- Fixed and Refactored the item renderers of the Wrench, Blockzappers, Worldshapers, Symmetry Wand and Deforester
- Tweaked blockzapper beam rendering to look less clunky
- Fixed selection of zapper tools not showing after they had been dual-wielded
- Schematic previews can now render TEs
- Schematic renderer no longer relies on negative scale and noCull for mirrored previews (fixes a few inconsistencies)
- Avoided blending issues with the outliner system when using multiple textures throughout a batch
- Introduced SuperRenderTypeBuffer as an attempt to give options for render order in the RWLE context (does not fix the early flushing in the fallback buffer)
- Added back the silk touch requirement to suitable loot tables
- Added generated recipes and tags for glass and window blocks
- Fixed blockzappers selecting new blocks upon firing
- Removed duplicate recipes and lang entries
- Fixed some outdated translation keys in ui screens
- Setup automated recipes for stone palette blocks and their stairs/slabs/etc
- Fixed datagen putting air blocks as drops for attached logistical blocks
- Fixed recipes and lang entries using outdated registry names
- Fixed kinetic blocks appearing twice in the main creative tab
- All Items are now using registrate
- Blockzapper now renders an outline around its affected area
- Ported rainbow debug ™️
- Reworked the custom item model/renderer system
- Schematics now preview their structure again
- SuperByteBuffers now support being rendered into non-BufferBuilders
- Fixed all TERs that had their transformations backwards
- Fixed contraptions not rendering tileentities when not near world origin
- Fixed Schematic table crashing on upload
- Made more kinetic blocks non-opaque
- Ported the contraption renderer
- Fixed sticky blockstates of the linear chassis
- SuperByteBuffers can now be given a separate matrixStack for vertex lighting
- Kinetic TERs now make use of the passed light parameter
- Added functional interface for block vertex coloring
- Removed several unused type-check-based behaviours
- Belt now registers its color handler in the builder
- Natural scoria now registers its color handler in the builder
- Fixed wrong offset in colored vertex models
- Added support for Block & ItemColors in CreateRegistrate
- Updated forge and removed obsolete warning suppressions
- Fixed mossy & overgrown block items not having their foliage layer coloured
- Added builder transform for registering stress config values for kinetic blocks
- Created a blockstate generator for belt blocks
- Added belts to registrate
* Minor Chinese Lang File Fix
According to the feedback received from fellow Chinese players, I made some minor fixes and improvements.
* Update zh_cn.json
Co-authored-by: Snownee <1850986885@qq.com>