- Fixed water bottles able to be gather by clicking honey or chocolate fluids
- Fixed deployer not parting with its excess items
- Added hint message for backed up deployers
- Fixed basin spoutputs appearing on blocked faces
- Fixed belts sometimes popping off when disassembling a contraption
- Made Portable Storage Interfaces a little more lenient to engage at funny angles
- Encasing fluid pipes now locks their configuration
- Encased fluid pipes now join textures with adjacent casing blocks
- Fixed windowed pipe not allowing to be encased
- Fixed wrapped models not passing down model data in multi layered situations
- Encased shafts and gearboxes can now join textures with respective casing blocks
- Added back encased shaft items for creative mode
- Fixed encased shafts able to be created with casing and cogs
- Controller rails can now control furnace minecarts
- Controller rails now snap to adjacent rails with the correct facing
- Controller rails no longer get reversed when transitioning to or from a slope in certain orientations
- Controller rails are now craftable
- Fun refactors
- Updated texture
- Recipe adjustments
- apply redstone's block coloring to the controller rail
- add a little more polish to the piston pole placement helper
- textures at create:block/controller_rail_on and _off are currently unused, _analog is used for item only i think
- Further attempts at improving the coupling physics
- Fixed reversed couplings losing their physics entry point
- Fixed "angel block" placement through super glue
- Brass tunnels now distribute across matching filtered outputs exclusively before sending items to unfiltered sides
- Less chute logic on render thread pls
- Fixed flapfunnels not taking secondary items off depots
- Funnels can now sit horizontally on saws and drains
- Added a recipe from natural to regular scoria
- Added useful goggle information to chutes
- (0.3.0) Chutes can no longer carry a fan-like air stream
- Fixed chutes overwriting contained items when picking them up from below
- Basins can now push outputs to any open inventory
- Basin output can now be controlled using a wrench
- Fluid Tanks and Creative Fluid Tanks now form a combined fluid inventory on contraptions
- Added the Portable Fluid Interface
- Fixed tanks placed with nbt not clamping their contained fluids
- Item Storage information on Contraptions no longer get sent to the client
- Combined fluid storage synchronizes to the client and applies new contents to the corresponding mounted TE renderers
- Fixed motion of dripping potion particles from fluid pipe flow indication
- Portable Storage interfaces now interrupt their connection when receiving redstone power
- Fluid tanks now attach the full multiblock when a part of them is moved by a contraption
- Fluid tanks now rotate and mirror properly
- Fluid tanks now react to movement properly
- Creative fluid tanks no longer lose configured fluid when more tanks are added to it
- Fluid tanks no longer render ghost fluids when placed with nbt
- Fixed some inconsistencies with tanks distributing fluids when connecting/disconnecting in multiblocks
- TileEntities are now being considered when rendering static blocks in a moving structure. Fixed brackets and tank blocks not rendering properly
- Poles no longer display their length when used for decoration
- Increased scope of caught exceptions when rendering modded tes in schematics and on contraptions
- add placement helper for piston extension poles
- add piston pole length to goggle overlay
- fix mechanical pistons being a little too generous with pole alignment
- allow ProperDirectionalBlocks to be rotated with the wrench
- Fixed stabilizer bearings not always rotating their head against parent transform
- Windmill bearings now display a tooltip when waiting to be updated by a player
- Removed obsolete overrides from hotswapping streak
- More cleaning up and major refactoring in Contraption entity implementation (needs testing)
- Minecarts can no longer be mounted on seats
- Mechanical bearings now "stabilize" rotation of a contraption with an attached sub-contraption
- Added hints when looking at
- Mechanical arms with no targets
- Funnels attempted to be used like 0.2 transposers
- Bearings that require an update to attach to their blocks
- Added some additional feedback when players apply filters
- Spouts now place two blocks above a depot/belt when used
- Basins can no longer be placed directly under a press or mixer
- Fixed prismarine recipe cycles from various mod interactions
- Updated wrench model (Kryppers)
- Funnels on depots and perpendicular to belts use a new model
- Funnels at the end of belts
- no longer have a directional constraint
- can now be extended/retracted manually
- now hold items back at the block boundary
- Extracting Funnels on top of belts can now specify an amount no their filter, taking x items off a nearby stack when possible
- Fixed some issues with belt/funnel interaction
- Items reaching the end of a belt will still be regularly checked by perpendicular funnels in the space
- Contraptions now render blocks in appropriate render layers
- Straight diagonal Chutes now create an intersection when a funnel is directly above them
- Attempted a safety fix to bracket removal from shafts and cogs
- Fixed windmill structures not stalling when their attached network is overstressed
- Added wooden and metal brackets
- Brackets can be applied to shafts, cogs and fluid pipes
- Brackets prevent pipes from connecting to adjacent pipes
- Fixed blockzapper not showing up in the searchable creative menu
- Added config values for hose pulleys
- Hose pulleys now extinguish lit waterloggable blocks
- Hose pulley now break blocks that cannot withstand vanilla fluid flows
- Spout is now wrenchable
- Fixed spout not activating properly
- Added fluid particles that supports fluids without a block variant
- Potion fluids now apply their effects to nearby entities when spilling from an open end
- Fixed pumps not rendering fluid particles when spilling/pulling fluids directly
- Hose Pulley no longer accepts fluids that cannot be placed
- Hose Pulleys and open pipes can no longer place water in the nether
- Some Refactors to the particle system
- Reverted reversed crtl activation for schematic tools
- Added a command to fix broken lighting in some of creates models (enables experimental forge block rendering)
- Fixed fluid ingredients in jei once again
- Fixed fluid tag ingredients being resolved on the client
- Added the item drain
- Refactored pulley renderers
- Fixed belt funnel not dropping filters
- Fixed funnel filter slot positioning on upward facing funnels
- Sails can now be sheared
- Fixed the kinetic connectivity of the rotation speed controller
- Valve handles can now by dyed in world
- Seats can now be dyed in world
- Fixed Stockpile Switch emitting redstone power towards its detection target
- Organized Imports
- Fixed server launch issues
- Added the hose pulley
- Added creative tanks
- Fixed sails not getting consumed when placed against each other
- Items can now be inserted onto belts regardless of it moving or not
- Fixed item duplication on stopped belts
- Refactored fluid block rendering in JEI
- Reworked model of the schematic table
- Hand cranks can now be made without the need of brass
- Fixed tooltip referrals
- Crafters can no longer be covered when while they are holding an item
- Pushed some numbers around
- Fixed Mechanical Press animation de-sync between server and client
- The press no longer requires a redstone signal to activate on in-world items
- Fixed spouts and basin trying to create potion buckets
- The Mechanical bearing can no longer generate force from wind
- Added the windmill bearing
- Windmill bearings can be configured to rotate counter-clockwise
- Added Sail Frames and Sails
- Sails can by dyed in-world
- Sails negate fall damage
- Sails attach themselves to blocks and do not require a sticky surface or chassis
- Clockwork bearings can now be configured to switch minute and hour hand aswell as use a 24 hour cycle
- Fixed tunnels with windows occluding block faces directly behind them
- Fixed item model of the mechanical saw
- remapped seat tooltips
- remapped outdated lang keys
- applied changes of #395 to 1.15
- Fixed Schematic hotbar overlay sometimes drawing on top of the item icon
- Fixed mechanical arm lighting and render bounds issues
- Bell contraptions no longer causes a NullPointerException when they
are stopped
- Schematic usage shouldn't require a player to not be sneaking, and
changes the key to CTRL to match tool tips
- Refactored JEI plugin to use a builder for categories
- The mixer can now process vanilla potion recipes
- JEI support for fluid potion mixing
- Refined some categories to not show obsolete information
- Compacting and automatic vanilla packing are now in separate tabs
- Fluids can now be manually picked up from a basin
- Basins and Spouts can now extract from and fill vanilla potion items
- Improved the filtering for fluid tests, such as the basin recipe and smart pipes
- Fixed CombinedTankWrapper losing nbt data of transferred fluidstacks
- Fluids in JEI now display the exact amount required
- Fixed short background of custom compacting JEI
- Fixed localization of sawing recipe category
- Fixed blocks waterlogged by a pump not scheduling a fluid update
- Arms can no longer feed random junk to a jukebox
- Arms are no longer oblivious to hot-swapped blocks in its target areas
- Arms can now directly extract from and insert to Deployers and Crafters
- Arms can now feed blaze burners
- Fixed brass funnels deleting items inserted into a full or stalled inventory
- Fixed brass funnels in hopper mode not showing amounts on filters when transferring between server-only inventories
- Arms & Deployers can now be paused using a redstone signal; stopping them after their next completed cycle
- Fixed zapper tools not applying changes when the screen is closed using the confirm button
- Reorganized valve handle registration
- Added more preliminary recipes
- Rows of nixie tubes will now display text from a name tag used on them
- Nixie tubes will dynamically update score/selector/nbt components in the displayed text
- The collision response now (semi)-supports yaw-pitch combined rotations of contraptions
- Attempted collision and rendering of contraption couplings moving up and downhill
- Fixed sychronization issues of a mounted contraptions' initial orientation
- Contraption couplings no longer render the virtual coupling connection
- Entities can no longer mount the cart connected by another carts' contraption
- Contraption coupligs no longer rotate backwards when opposite couplings are added onto it
- Minecarts no longer deadlock each other when one of them had stalled due to an unloaded coupling end
- Cart assemblers only disassemble coupling contraptions if both carts are within an inactive cart assembler
- Fixed interactions between coupling contraptions and furnace/chest minecart invs
- Fixed concurrency / race condition issues with contraptions loading in during a collision cycle
- Reworked implementation model of minecart tracking and couplings
- Coupling items now get consumed when used in survival mode
- Added some player feedback when couplings cannot be created
- Fixed couplings disappearing on the client due to sync issues
- Wrenches can now remove minecarts in one hit
- Wrenches can now be used to remove couplings from minecarts
- Cart assemblers now attach themselves to the block above, no longer requiring active "sticky-ness" of the contraption towards it
- Minecarts can no longer be moved while a contraption is stalling them
- Fixed players flailing their limbs around while standing still on a moving contraption
- Attempted to reduce drag of remote player positions while on a contraption
- Contraptions no longer log out with the player riding them
- Attribute filters are now made of brass
- Added the ability to disable auto-compat with vanilla recipe types in the configs
- Added a recipe type for custom basin/press compacting
- Basins can now process items and liquids in recipes
- Input items/fluids of a basin can now be extracted or reused in further processing
- A basin diagonally below another basin with collect outputs of recipes processed in the top basin for ease of automation
- (Temporary debug recipes)
- Visual rework of all active UIs
- Fixed large scale renderers such as belts, cannons, pulleys to disappear when partially out of frame
- Schematic and Quill now has the ability to convert a selection to a readied schematic instantly
- Moved option input of cart assemblers to side faces
- Fixed crash when attempting to smelt items on belts/depots
- Stockpile switches can now be inverted
- Fixed stockpile switches not dynamically updating gui indicators frequently enough
- Tanks can no longer be directly interacted with in survival mode
- Sequenced gearshifts now emit a comparator signal based on their current instruction index
- The Piston instruction for sequencers can now accept distances up to 128m
- Fixed some rendering inconsistencies with symmetry mirrors
- Reworked symmetry mirror models to match the tool better
- Attribute filters can now add inverted conditions to the list
- Added the attribute "can be crushed"
- Made the schematicannon interface a little less confusing
- Fixed launched items of the schematicannon rendering warped
- Added a straight pipe variant to cut flows using rotational input
- Added a slower more precise variant of the hand crank
- Basins now render their contained fluids
- Implemented new PSI models by Kryppers
- PSIs are now used in pairs like contacts
- PSIs now act as an inventory proxy of the attached contraption
- Comparators can detect when two PSIs are interfacing
- Contraptions will continue moving after a second of inactivity
- Belt observer -> Content observer
- Content observers can now monitor any inventory and funnel transactions
- Stockpile switches no longer only access slots exposed to a specific side of an inventory
- Stockpile switches can now take a filter
- Brass tunnels once again have the ability to synchronize inputs among a chain
- Mechanical arms now have a range limitation
- Mechanical arms now wait with initialization until their area is fully loaded
- Chutes no longer ignore the direction of an attached fans air flow
- Chutes now render particles indicating their movement direction
- Chutes can now pull items up from belts or off the ground
- Fixed item model of shadow casing
- Fixed invisible quads under funnels when no casing is applied to the belt
- Belt mounted funnels can now be perpendicular to the belt theyre on
- Funnels can now transpose items like a hopper when facing down
- Item distribution across belts using brass tunnels can now be configured with a wrench
- Added new icons for the distribution options of arms and tunnels
- Removed obsolete code
- Fixed some weirdness with creative crates and funnels
- Reworked tileentity behaviours for inventory interaction
- Deployers no longer actively pull items from other inventories
- Some more work on basins
- Added a new inventory type wrapping an itemstack handler that automatically syncs the tile entity. It also implements IInventory for recipe shenanigans
- Held items of a deployer can now only be extracted by other blocks if it does not match the filter
- Fixed excess items not able to be extracted from deployers
- Removed some things
- Funnels no longer actively transpose items between chutes and inventories unless they are vertical
- Chutes can now active pull and insert items from/to inventories above/below them
- Fixed upright items rendering inconsistently between belt and depot
- Fixed various timing and sync issues with the spout
- Added a recipe type for spout filling
- Fixed more co-modification on belts
- Item and fluid nbt tags in recipes are now data-generated as json objects rather than strings
- Transported item processing can now leave items behind
- Transported item processing now has more meaningful result data
- Tweaked spout animation
- Fixed cullfaces on spout model
- add a dev utility that allows us to force-unload chunks
- move mechanical arm scrollbox
- fix oxidizing blocks trying to access a blockstate from unloaded chunks when on the border
- Expanded the RecipeProvider infrastructure
- Migrated mechanical crafting recipes to generated
- Migrated cooking recipes to generated
- Fixed missing particles on vertical motor model
- Adjusted a few recipes
- Reworked and cleaned up Create's ProcessingRecipes
- Prepared ProcessingRecipes for fluid ingredients and outputs
- Added datagen infrastructure to ProcessingRecipes
- Migrated all hand-written ProcessingRecipes to generated
- Removed scrollinput on mixers
- Fixed recipe lookup cache not invalidating on datapack reload
- Removed "catalyst" ingredients
- Reduced ambient dripping particles of fluid pipes
- Fixed reversed uvs on encased fans
- Fixed tile entities not being added to contraptions client-side
- Added encased and non-opaque versions of the fluid pipe.
- Added new generic te behaviour across pipe blocks for their rims/attachment models
- Pipes and pumps now render a little drain cap when connected to a fluid inventory
- Implemented reworked chute models by Kryppers
- Implemented new basin model by Kryppers
- Chutes now have proper selection bounds
- Some minor texture & model touch-ups
- Fixed symmetry wand position in its GUI
- Fixed some inconsistencies with a tanks' fluidhandler invalidation when resized
- Patched crashes in present fluid handling of the basin
- Tanks now slightly shade horizontal faces of the contained liquid
- Tanks no longer resend data every tick when filled gradually
- Introduced a new lerped value type with better design decisions
- Refactored Smart tileentity serialization to better support custom overrides in contained behaviours
- Pumps propagate flows in the pipe networks in front and behind itself.
- Pumps collect all possible in and outputs across the reachable pipe graph as endpoints
- Flows move across multiple branches of a pipe network when both are equally viable
- Open-ended pipes are treated as endpoints and leak fluid into and out of a block space
- Open endpoints serialize stateful information about fluid units gathered and held at the interface
- Open endpoints turn a fluid block into 1000 fluid units and back
- Open endpoints undo their transaction when their flow changes from pull to push
- Open endpoints cannot pull fluids back when a full liquid block was not placed yet
- Open endpoints waterlog blocks when the provided fluid is water
- A collision response is triggered when different types of fluids meet at open endpoints
- Fluids are transferred instantly by the throughput of a completed flow per tick
- Pumps cut flows when vital pipes are removed
- Pumps do not lose progress of finished flows when an unrelated part of the pipe network changes
- Pumps do not lose progress of finished flows when reversed
- Pumps distribute their throughput across available input flows evenly
- Pumps distribute gathered input fluid across outputs evenly
- Pumps expose furthest reachable pipefaces to other pumps for chained transfer
- Chained pumps with fully overlapping flow sections provide their endpoints at the entrance of the other pump
- Chained pumps with overlapping flow sections participate in two shared endpoints, one for each pump dominating the contested region
- Chained pumps with overlapping flow only transfer via the optimal of the two possible endpoints based on their speeds
- Chained pumps of equal speed pick one of the two available endpoints deterministically
- Pumps transfer without flows when no pipe is between the pump and the endpoint
- Pumps serialize and recover stateful information about held fluid units at open endpoints
- Chained pumps do not actively transfer when both are partaking with push flows (or both pulling)
- A pull flow originating from an inter-pump endpoint only commences when the corresponding push flow is completed
- Chained pumps re-determine the optimal flow when the speed of one is changed at runtime
- Throughput of chained pumps is determined by their weakest link in terms of speed
- Endpoints created for chained pumps is treated equally to other available endpoints when fluid is distributed
- Pipes do not contain a physical amount of fluid.
- Pipes never hold serialized vital stateful information about fluid transfer.
- Pipes synchronize local flow progress and fluid type to clients
- Flows in a pipe progress with the speed of the network flow
- A networks flow speed depends on the speed of the aggregated pump
- Pipe flows of different flow graphs of different pumps interact with each other
- A collision response is triggered when two different types of fluid meet within a pipe
- Pipes spawn particles to illustrate contained flows/liquids of flows
- The fluid transfer role is exposed through a TE behaviour with some callbacks and properties
- Open endpoints show particles when interacting with in-world fluids
- buffering SeatMovementBehaviour
- changed visibility of AllMovementBehaviours.addMovementBehaviour(ResourceLocation, MovementBehaviour) to public for easier mod compat
- added console warn message when something tries to register more than one movement behaviour per block
- Seats now pick up non-player entities when touching them while being moved
- Seats now drop off entities when being moved into a solid block
- Previously colliding entities now get moved to match their position on the placed structure on disassembly
- Contraption motion no longer gets fed into the collision response for non-minecart contraptions
- The server now gets frequent updates about client players riding a contraption, fixes instabilities with projectiles, damage and anti-fly detection
- Players can now take fall damage when colliding with contraptions
- Any living entity can now use seats
- Fix client sync issues with seats
- Fixed contraptions double-reversing roll and pitch values when communicating to the collision engine
- Seats now transfer their passengers to a contraption when moved and back when disassembled
- Attempted further refinements to the collision response of horizontally rotated contraptions
- Set up a hook to inject custom interaction between players and contraption mounted blocks on right-click
- Seats can now by mounted by players while assembled to a contraption
- Minor refactors to the contraption class
- Collision separation now supports motion sweeping in order to avoid tunnelling when entities drop onto contraptions from a greater height
- Further improved the collision response
- Entities can no longer be clipped into solid walls by the collision response
- moved fan transparent blocks to block tag
- added blaze heater as transparent
- blaze heater on lowest level is now a valid bulk smokig block
- blaze heater on heat 2 and higher is now a valid bulk smelting block (that requires fuel but does not spill lava or set your house on fire)
- added empty blaze heater
- catching blazes (rclick blazes or a blaze spawner)
- only blaze heaters with blaze can heat basins or power fans
- updated item tooltip to fit the discussed fueling system
- Heated Mixing: Mixing can now require the player to heat the basin (with either the usual fan heaters for a heat level of 1 or the blaze heater for higher heat levels)
- Made mixing brass ingots from copper and zinc ingots require heating (as example)
- added the blaze heater to valid fan heaters
- added TE renderer for fan heater to display a blaze head always facing the player
- added fueling of blaze heater with furnace fuel (onUse event, not with inventory to challenge the automation. To be discussed.)
todo:
- add heat requirement display to JEI
- better item model for blaze heater
- new special fuel for higher heat levels
- fan stoking
- added Interface IExtendedProcessingRecipe supporting requiredHeat, fluid inputs and fluid outputs
- set Mixing recipes to use the extended serializer in AllRecipeTypes
- removed constructor parameters specifying fluid usage in recipes that do not support fluids (and changed the ConversionRecipe JEI support class back)
- cleaned up annotations, ordered AllRecipeType enum values and imports, reformatted recipe code
- Arms can no longer insert into powered brass funnels
- Slight ArmInteractionPoint refactor
- Arms can now interact with Millstones, Basins, Jukeboxes, Crushing Wheels and the Mechanical Saw
- Fixed crash when logging into a world with a running mixer
- Arms now start to dance when one of their in or outputs is a running jukebox
- Arms can now be mounted on the ceiling
- Arms now always prefer the interaction points that were selected first
- Fixed belt funnels not updating their blockstate properly when transitioning from other funnel types
- Vertical funnels next to the end of a belt will now stall the belt when unable to collect incoming items
- Minor model & texture touch ups
- Arm no longer cancels player interaction when its empty handed
- Fixed chutes not vertically interacting with andesite funnels
- Fixed dynamic Mechanical Arm parts not being lit correctly
- Fixed Mechanical Arm not always initializing interaction points on the client
- Belt tunnels now create side-openings for belt-like blocks such as the depot
- Belt tunnels no longer create flaps when there is a belt funnel connected to that side
- Brass tunnels can now distribute items among their output sides and other connected tunnels, taking into account their sided filtering
- Brass tunnels now visually connect for upcoming splitter functionality
- Added a tileentity behaviour that allows separate filtering for each face
- Added filtering to brass tunnels
- Removed synchronization behaviour of belt tunnels
- Belt tunnels can now be placed on non-reinforced belt segments, and will apply the missing casing automatically
- Bunch more renames
- Small tweaks to the andesite tunnel texture
- Mechanical arms can no longer take from belts covered by a tunnel
- Belt tunnels can now create a window when directly next to a funnel
- Fixed tunnel flaps not being triggered when inserting into a covered belt
- Removed pre-0.3 funnel blocks
- Added andesite variant to reality funnels, without filtering or redstone control
- Added andesite variant to belt tunnels
- Reality Funnel -> Brass Funnel
- Sideways and Vertical belts can now be reinforced with casing
- Belts can now be reinforced with andesite casing
- Reinforcing belts no longer consumes the casing block
- Reworked reinforced belt models
- Fixed flipped diagonal belt casing once again
- Fixed belts breaking instantly when punched in survival mode
- added a block tag non_movable conatining blocks that should not be moved with contraptions
- added a block tag for brittle blocks breaking without support
- moved obsidian from hardcoded to non_movable block tag
- moved flower pots, doors and bells from hardcoded to brittle block tag
- registrate block tagging of brittle blocks
- made immersive engineering connectors non-movable to avoid reported weird behavior
- Made Create cobble stone variants part of forge:cobblestone
- autumnity wood compat
- changed biomes o'plenty flower crushing to milling (as it is with vanilla flowers)
- Chutes can now transfer items
- Chutes now propagate air flow from attached fans
- Fixed a few issues with mechanical arms
- Removed unused chute models
- Implemented appropriate interactions between funnels and chutes
- The arm blockitem can now be used to select inputs & outputs
- Arms now transfer items between inputs and outputs
- Arm support for Belts, Depots and Funnels
- Some safety checks in net code
- Minor refactor to NBTHelper
-added two config entries to offset the goggle overlay on x/y axis
-added a command (/create overlay [reset]) to allow editing the overlay position ingame
- Belt funnels now render with animated flaps
- Extracting funnels can now be given a stack size
- Filtering now supports setting the extraction count for empty filter slots (wildcard)
- Funnels on belts can now extract and insert items according to their setting and filter
- Funnels can now push/pull items to/from a depot
- Fixed creative crates not marking their inventory as removed when destroyed
- Funnels can now pick up items colliding with their front face
- When holding a funnel the game will now always prefer placement over block interaction
- Fixed items not able to be held in place by tunnels
- Depots can now hold on to items similarly to belts
- Item processing such as the press and bulk smelting now targets a Processing TE behaviour, rather than the belt only
- The press and similar processing can no longer commence whenever there is a block with a collision shape between item and machine
- Implemented item processing for Depots
- Items can seamlessly traverse from belts to depots
- Removed the IBeltAttachment system
- Item processing on belts is now a TE behaviour
- Added TE behaviour for allowing belts (and similar) to directly insert items
- Massive refactor to the Belts' inventory
- Fixed fast moving items missing their processing step
- Saws, Basins, Crushing Wheels, Belts and Crafters now interact through the new behaviour rather than hard-coded interactions
- Fixed items (visually) disappearing on saws while queueing up
- Items on belts now back up a little further away from the end of the belt
- Added filtering behaviour and in-world slots to new funnel blocks
- Filtering behaviour now supports slots active on multiple sides
- Funnels no longer wipe their TE when changing state
- Fixed VoxelShape for extended belt funnels
- Added a funnel block variant that interacts with chutes horizontally (same item)
- Belt and Chute Funnels now have a push/pull property
- Removed Chute Ports
- Tidied up R-Funnel texture sheet
- R-Funnels can now be powered by redstone
- Non-mounted R-Funnels are now full hopper-like blocks rather than fixtures
- Copper, Brass and Zinc blocks can now be used as beacon base block
- Copper, Brass and Zinc can now be used to activate a beacon
- Create ingots are now listed under the forge:ingots tag (not only forge:ingots/type)
- Create nuggets are now listed under the forge:nuggets tag (not only forge:nuggets/type)
- Create plates are now listed under the forge:plates tag (not only forge:plates/type)
- Updated registrate to support multiple tags
- Fixed reversed matrices and swapped rotation axes passed into the collision resolver
- Temporarily reduced collision manifold generation to collisions that are NOT edge-to-edge collisions.
- Enabled collision response for clockwork bearings
- Added blockstates, models and TE rendering for mechanical pumps
- Removed unused pipe textures
- Removed hasStaticPart in IWrenchable as it became obsolete in 1.15
- Bumped version
- Patched some localization gaps from the registry wipe
- TE's with an ItemStackHandler capability are now viable for mounted storage
- Fixed pulley placing down ropes when destroyed while moving
- Fixed inconsistency with glue removal and placement
- Fixed encoding of generated degree symbols in lang
- Fixed pistons along x moving at inconsistent speeds, overshooting their bounds
- Fixed belts along x not moving entities
- Fixed diagonal belts along z teleporting entities miles away
- Fixed tree fertilizer not working
- Fixed extractors looking for belt inventories too eagerly, adresses #327
- Slightly refactored Extendo Grip handlers
- Fixed missing particle texture of Extendo Grips
- Fixed crash when assembled minecarts pick up the block below their assembler
- Ploughs no longer break blocks if farmland is below them, adresses #345
- Fixed Schematic tools placing lit furnaces, adresses #342
- Super glue can no longer be removed while inbetween two blocks, adresses #341
- Added a safety check in RotationPropagation, addresses #340
- Players using Extendo Grips can now hurt and interact with entities within the extended range
- Hurting entities using Extendo Grips now applies massive knockback
- Serverconfig now registers together with the others
- Added missing stress config entries for components without a default stress impact greater than zero
- bumped version
- Tagged stone variants from Create palettes to generate in a terraforged world type
- Fixed gearbox pretending to be a deployer
- Fixed reversed rendering in the furnace engine TER
- Motors, fans, flywheels and handcranks now reverse their rotation when facing in negative axisdirections. Addresses #236
- Cart assemblers no longer auto-attach to blocks on their sides (top only)
- Removed temporary lang partial with entity names
- Fixed and Refactored the item renderers of the Wrench, Blockzappers, Worldshapers, Symmetry Wand and Deforester
- Tweaked blockzapper beam rendering to look less clunky
- Fixed selection of zapper tools not showing after they had been dual-wielded
- Schematic previews can now render TEs
- Schematic renderer no longer relies on negative scale and noCull for mirrored previews (fixes a few inconsistencies)
- Avoided blending issues with the outliner system when using multiple textures throughout a batch
- Introduced SuperRenderTypeBuffer as an attempt to give options for render order in the RWLE context (does not fix the early flushing in the fallback buffer)
- Added back the silk touch requirement to suitable loot tables
- Added generated recipes and tags for glass and window blocks
- Fixed blockzappers selecting new blocks upon firing
- Removed duplicate recipes and lang entries
- Fixed some outdated translation keys in ui screens
- Setup automated recipes for stone palette blocks and their stairs/slabs/etc
- Fixed datagen putting air blocks as drops for attached logistical blocks
- Fixed recipes and lang entries using outdated registry names
- Fixed kinetic blocks appearing twice in the main creative tab
- All Items are now using registrate
- Blockzapper now renders an outline around its affected area
- Ported rainbow debug ™️
- Reworked the custom item model/renderer system
- Schematics now preview their structure again
- SuperByteBuffers now support being rendered into non-BufferBuilders
- Fixed all TERs that had their transformations backwards
- Fixed contraptions not rendering tileentities when not near world origin
- Fixed Schematic table crashing on upload
- Made more kinetic blocks non-opaque
- Ported the contraption renderer
- Fixed sticky blockstates of the linear chassis
- SuperByteBuffers can now be given a separate matrixStack for vertex lighting
- Kinetic TERs now make use of the passed light parameter
- Added functional interface for block vertex coloring
- Removed several unused type-check-based behaviours
- Belt now registers its color handler in the builder
- Natural scoria now registers its color handler in the builder
- Fixed wrong offset in colored vertex models
- Added support for Block & ItemColors in CreateRegistrate
- Updated forge and removed obsolete warning suppressions
- Fixed mossy & overgrown block items not having their foliage layer coloured
- Added builder transform for registering stress config values for kinetic blocks
- Created a blockstate generator for belt blocks
- Added belts to registrate
- Updated outlines rendered by the schematic and quill
- Removed some now auto-generated leftovers from the asset folder
- Fixed Schematic Table screen not rendering the table properly
- All palette variants now have auto-generated stairs, slabs and walls for certain patterns
- Layered variant types have connected textures again
- Centralized all SpriteShifts
- CT behaviour is no longer tied to blocks implementing interfaces
- Custom models and connected textures can now be assigned in a custom blockbuider
- Ported framed glass to Palette Registrate
- Clutch, Gearshift and Gearbox joined the registrate
- Fixed belt and gearbox items not being assigned creative tabs properly
- Cleaned up and extended the blockstate generator helpers
- Removed advancements from static assets
- Added datagen .cache to gitignore
- Split the palettes section into its own Creative tab
- Fixed Clutch and Gearshift rendering their casing in the TER
- Fixed uv issues with connected textures
- Fixed chromatic scope not showing on blockzappers
- Refactored game element rendering in user interfaces, such as JEI screens
- Reduced tracking range of mounted contraptions
- Fixed carpets not able to be pushed directly
- Fixed Water Wheels and Belt Tunnels crashing when rendered in a schematic preview
- Fixed blazing sword taking damage in the nether
- Fixed blazing sword not igniting entities
- More safety checks
- Fixed stack overflow when overpowering a RSC from both inputs
- Fixed outrageous duplication glitch in deployer item handler
- Fixed crafters not able to return multiple buckets
- Super glue can now be used to make chassis sticky
- Fixed latch hotfix still not making it work properly
- Cocoa pods can now be harvested by harvesters
- Fans, RSCs, basins, stockpile switches, gauges, engines, cranks and other blocks can now be moved in a contraption
- Most of creates technical blocks can now be picked up using a wrench
- Fixed Stockpile switch not reacting to movement.
- Fixed Stockpile switch not reacting to changes to a double container
- Chassis range display no longer shows the overlay for non-sticky directions
- Condensed mechanical crafting into one JEI page category, scaling down slots if necessary
- Fixed ploughs trying to break water blocks
- Fixed stationary contraptions getting nudged around by expiring farmland blocks
- Shulker boxes can now be used as portable storage on contraptions
- Added vertical rotation support to buttons, levers
- Fixed certain directional blocks flipping around inconsistently when contraptions rotate by 180 degress
- Random safety checks
- Vertical belts no longer pop when rotated horizontally
- Fixed inconsistent funnel activation when items are inserted on the same segment
- Fixed adjustable pulley popping off due to floating point precision issues
- Fixed toggle latch acting strangely with input signals
- Schematicannons can now place belts safely
- Removed invalid Schematic item from creative tab
- The creative crate is back on the menu
- Schematicannons with creative crates no longer require gunpowder to operate
- Creative crates can now be used for infinite item supply and voiding
- Added a few more advancements
